Links to released photomodes

There's always a chance! but not atm

FransBouma

Hi, Atomfall any chance?

Wanna Fly

No, sorry

FransBouma

Hi Otis will you create a camera mod for Ninja Gaiden 4 ?

Daniel

When it came out I really tried (even refunded it, then bought it again after I discovered I might be able to debug it, then failed again... ) but debugging turned out to be impossible (later on I learned how, but haven't gone back to it) as they added an anti debugger system, so it was impossible to adjust the UUU to match the game's obfuscated code... So I had to give up.

FransBouma

Otis_Inf, good afternoon and thanks for the mods. I would like to ask you if you have the camera mod for Mafia The Old Country?

florentino perez

No sorry...

FransBouma

Otis_Inf, good afternoon and thanks for the mods. I would like to ask you if you have the camera mod for subnautica?

Gustavo Do Nascimento Melo

I'm not making a camera for that game indeed.

FransBouma

I doubt you'll try to make a tool for Trails in the Sky 1st Chapter, am I right? There is FreeCam in CheatEngine, but it doesn't support FOV and tilt (something about the engine 'not using Euler angles').

Александр Валиулин

Yes

FransBouma

Hi! Are you planning to release a photo tools for Dying Light: The Beast?

Paweł Wrzesień

I won't make a camera for that old game, no, sorry :) You have to make due with the build-in console commands, I'm afraid

FransBouma

Hey ! Excuse me please, may i ask, have you ever planned to make a photomode for Fallout 4 or is it not possible to do something like that in such games or are you not interested in it 🙃

Casu

Yeah that doesn't work, the game logic prohibits that. It's a hybrid engine so parts of the game are running on their own engine inside UE

FransBouma

I have a question about the UUU camera tool for Tekken 8, does the pawn movement feature not work in the game? I have the latest UUU and im trying to activate the ability to move my character but nothing happens

Maso_Prince

It isn't, sadly, as they use some different kind of skeletal mesh, the UUU does intercept the right function but their actors aren't compatible.

FransBouma

Hey, is it possible to add the pose mode tool for Tekken 8 please ? Great Work

Acnologia

No, I'm not going to add support to older games for the connector, as it's indeed not simple for these, as I have to port them to a newer version of my system which is a substantial amount of work (these were made with an older version of my IGCS system)

FransBouma

Phenomenal work, Otis! The experience with your tools and especially the IGCSConnector has been flawless for me to create some customized shots with the ReShade addon. I'm just wondering whether you plan on upgrading older versions of the released tools to support the IGCSConnector or whether it's impossible to add it for some games? For example, the Watch Dogs series (Watch Dogs, Watch Dogs 2 and Watch Dogs Legion)?

dendenxu

English only, please. But I think you mean 'Mafia the old country'? Nope. they added an anti-debugger system so I can't fix the UUU for it as I can't debug anything. It's rare that this happens in single player games, but they apparently thought it was necessary. So no tools for Mafia (I really tried)

FransBouma

Kiedy szacunkowo będzie gotowa kamera do nowej części Mafii?

Elektryk

Outlast A new beginning works with UUU v4, all other outlast games don't have a camera I made

FransBouma

do you know the game Outlast Trials? freecam crashes the game, other people have made freecam but they are not good. your tool is the best ive used, will it be available for that game ever? thanks

Luke Litzmann

I am looking into it, but at first glance it's a weird setup, the UUU crashes the game no matter what and if I work around that it can't find the camera which never happens with UE games. Perhaps I find it tomorrow

FransBouma

It really is incredible software that you have made and I really appreciate all the work that's been done. Just wondering if you will be able to have an update for Mafia Old Country? I know it's a pretty new title having just come out today but would be great as the game crashes every time I try and use it and all I want to do is get rid of the annoying black bars during cutscenes.

wickerman99

how to take a screenshot: https://opm.fransbouma.com/takeshot.htm More about hotsampling: https://framedsc.com/basics.htm#hotsampling or: https://opm.fransbouma.com/generalconfiguration.htm#hotsampling Hotsampling is about resizing the window to take a screenshot at a higher resolution. So you first set up your shot using a resolution that fits your screen, then, if you are happy with the setup, you hotsample to a higher resolution of that same aspect ratio (e.g. 16:9), then take the screenshot, and then go back to gameplay resolution using 'Fake fullscreen' so you can continue playing the game

FransBouma

Another question in general about UUU: what’s the best way to take high resolution screenshots? I don’t see any keystroke button to press. I’ve been just using windows + prntscreen but my photos all are 96 to 300dpi. I’m not understanding hot sampling at all.

M peacraft

palworld is ue5, so you can try uuu v5. I don't know what you mean with OSRS :)

FransBouma

In cutscenes, this might happen. The thing is that unreal engine uses 'sequences' for cutscenes where actors might be merged into the rest of the geometry and stop being separate objects, or at least, not selectable as such. The UUU asks the engine what object is below the cursor and the engine then reports the object it selects for you (based on a channel, there are 32 channels, so I try all of them, report the closest). I've checked this many times but there's no other way currently to 'select' an actor in a cutscene as the engine simply doesn't see them when it's asked what's there. :(

FransBouma

Hello there! :) Is there a reason why beasts in Hogwarty legacy can not be selected in pose editor? it just selects "through" them. Like, environmental stuff instead

Mero Chan

Hiya! Is there a camera for OSRS or Palworld? And thanks for everything you do! <3

Tetra

Hi is there a Cyberpunk 2077 tool. A screen archer provided this link but I am not seeing that game. Thanks

DeloresAbernathy

No, sorry

FransBouma

Hello I'm hoping for a dark souls 3 photomod do you think you will do.one?? I know it's an old game, but still popular

Christopher McHenry

The old one? I think I fixed the zip, but let me check again. Might still be a false positive tho, but if it includes extreme injector (A tool I used back in the days to inject the dll) that's the trigger. I'll check the zip

FransBouma

Hi Otis. I don't know if it's already been mentioned, but with Lord of the Fallen my PC tells me it's a virus^^ Is there another way to download the camera tool anyway?

Blubb

No, sorry

FransBouma

Hi, is there a version that works for Snowrunner?

Sashaxx

No, sorry

FransBouma

Hey Otis, quick question will there be a photo mode for EldenRing Nightreign?

Nem Plays

No, you need the KCD2 tools for KCD2 (linked above) :)

FransBouma

I have just a small question; is the KCD photomode also working for KCD2?

Sayoly

It works fine, but you have to use 4.10.3. Do you use 4.10.3? If you're using an older version, you need to get the latest (4.10.3).

FransBouma

For Stellar Blade, any chance for the pose editor to be available? When I inject, it says it isn't.

Lenonymous

Already have: Use the UUU v4.10.3! :)

FransBouma

Hello!Are you going to make a photomode tools for Stellar Blade?

theBreaker

Sadly, no, as it's basically a hybrid: the core engine which controls most of the game logic etc. is still the old engine, UE is just the renderer

FransBouma

Hey would fix for Ninja Gaiden 2 Black unlocker or something be possible? You know the slowmo pause etc.

MartyNewmaker

Sorry for the endless stream of disappointments, Brent, but... no. sorry

FransBouma

I know you've already said you won't do it but I'll be your best friend forever if you make a mod for nightreign. IM BEGGING YOU MY KING PLEASE

Maxwell Fleming

No, sorry

FransBouma

any chance for a bayonetta photomode?

cavy

Nope

FransBouma

any change for elden ring nightreign?

ZittoeSubisci

No, sorry

FransBouma

No, sorry

FransBouma

Hope this is not too much to ask for, but could you update DS Directors cut photomode with new features where one the camera follows Sam while you can adjust fov and camera zoom in and out. As well being able to unbind controller keys, especially rt and Lt being move camera up and down which I want to be changed. As I am using rewasd to move the camera up and down through keyboard, while still using controller

DD666

Will there be a release for Ready or Not? Cam functions seem to not work in the games replay mode

JDante

If it's an UE game, use the UUU for that engine version (4 or 5). The UUU is more sophisticated than any other of my custom cameras, so if the game uses Unreal engine, I won't make a special tool for that game

FransBouma

Hey! Are you planning on doing a Torque Drift 2 photomode? Or just use UUU?

DudeFB

Please use UUU v5.4.11+ :)

FransBouma

Any chance for a camera for Clair Obscur?

Tetra

Will start on it tomorrow morning :)

FransBouma

Will you do a photomode for Doom The Dark Ages ?

Daniel

No, sorry. Unity came with an anti cheat that was pretty hard to remove, and it was needed to remove it before debugging could start. I've tried a couple of times in the past but the easy removal of it doesn't work anymore. So I gave up and left it.

FransBouma

You've done tools for other Ubisoft/Anvil games, so I was wondering, would a photo mode tool for Assassin's Creed Unity be possible?

Chris J

Use UUU v5.4.12+

FransBouma

Are there any photomode for Expedition 33? Or did any of the photomode from this list work with the game? Thank you.

Bagarete

https://www.patreon.com/posts/46311727 The latest works fine

FransBouma

Any chance for new version for Cyberpunk 2.21? Just updated the game and your plugin doesn't work with their new photomode which is a shame because it was absolutely amazing. If I knew it will stop working, I wouldn't update the game at all.

Gabriela

uuu v5 works

FransBouma

Are you going to make a camera tool for the Oblivion Remaster or would the Universal Unlocker work for it?

Joshua Redfern

UUU v4 might work, but if not, then I'm afraid it's not going to be supported. It's from 2019, so it might be the engine version they used is too old to recognize by the UUU

FransBouma

Greetings. I've read the README but I still have a question. Please, can you take a minute to answer it when you have time ? I know your amazing photomode mod doesn't include the game I want to use it with (Bloodstained Ritual of the Night) but I tried it nonetheless and to my surprise I got a "Camera Hook" without issues. Of course, none of the camera commands worked. But I wanted to know if that meant something could be done for as little as possible to make the mod work or if it did mean nothing at all. Thank you very much for reading.

Terrence M. Delawgan

It says April 8 on his work-in-progress channel, but I'm not seeing it listed

ahainen

Hello, will you release a camera tool for South of Midnight?

Maeliosa Studio

yes

FransBouma

Hello there! <3 Will you upgrade Camera Tool for BG3 patch 8? Thank you

Дана Клиф

Yes

FransBouma

Hi there, are you going to create camera tool for The Last of Us 2?

Michał Wester

Yes

FransBouma

KDC_CameraTools_v101.zip , this is KCD1 ，right?

hanscapon

Thanks!

FransBouma

I wanted to say thanks again for your tools. My YT channel would not be possible without them. If you are curious here is a link: https://www.youtube.com/@videogameworlds Almost every video was made using your tools!

Yowza5891

I have answered the message? But in any case, see the FAQ here https://opm.fransbouma.com/faq.htm#in-cyberpunk-2077-when-i-enable-the-camera-theres-no-head

FransBouma

omg thank you so much for the Sunset Overdrive photomode tool... this and Saints Row 4 are the two old games that I love to dress up the protagonist 🥰

Jane Amber

Hello Otis. I've downloaded the Injector for Cyberpunk & V doesn't have a head. I sent u a message on here 5 days ago about this but seems to of gone unnoticed. Is this something that u may sort out at some point xx I can't really use V replica for wot I'm wanting it for xx

Daisy

Hello Otis. I've downloaded the Injector for Cyberpunk & V doesn't have a head. I sent u a message on here 5 days ago about this but seems to of gone unnoticed. Is this something that u may sort out at some point xx I can't really use V replica for wot I'm wanting it for xx

Daisy

Good luck then! I'll hold off on playing for a bit until your tools show up. For me, using them makes most games much more enjoyable. :)

Paweł Wrzesień

Currently working on that, progress is a bit slow

FransBouma

Hi! Is there a chance you are working on tools for Assassin's Creed: Shadows? :)

Paweł Wrzesień

Thank you! :)

J. Wehrle

Thank you I most certainly will. Sorry to be annoying.

SiNKiLLeR

Follow the Work in progress channel in the discord! Saturday most likely, but perhaps tomorrow

FransBouma

Maybe next week, as I've now completed the camera (testing left) for MHWilds which uses the same engine. But, no promises

FransBouma

Can't wait, any chance of an ETA?

SiNKiLLeR

Hi, sorry to bother you. But is there a chance to fix the photomode for dragon's dogma 2 or how to get it back running? Tried to downgrade DD2 to the version from May '24, but all I got was a black screen. Thanks

J. Wehrle

I've tried the setup and it's actually ok. Expect a camera soon

FransBouma

My friend Nico made CUE, for Unity: https://framedsc.com/GeneralGuides/cinematic-unity-explorer.htm

FransBouma

Some games require multiple frames to settle all effects for a stable frame. I noticed this too in eternal strands. Sometimes in UE5 it's ok to use fast, but often (I suspect lumen) you need to use classic 3 or 4 to get a proper render. Which is slower, but sadly unavoidable (as 'fast' works in tandem with the framerate so steps the camera with every frame, however if the engine needs 2-3 frames to generate a stable, sharp frame then you'll get a blurry result)

FransBouma

Atm RE Framework and MHWilds are still problematic so not soon...

FransBouma

I'm going insane! Trying to use UUU with IGCS DOF in Eternal Strands and every time I press Start Render the frame jumps and causes everything be blurry. I've tried both Frame wait types and changed the number of frames to wait but nothing is working. I feel like I've asked about this before but have no idea how to search old comments. I feel like the problem back then was that the bokeh was set too high, but I have played with that and have no idea how I can get good DOF if I can't have the bokeh set to .834 or 1.742 depending on the shot. If I lower it then I have no more DOF effect. So I'm really lost as to how to fix this or make it work. Any help would be so appreciated. Thanks.

Dave 'Durghan' Wilson

Have you ever considered doing a universal Unity Engine Unlocker? I've been trying to follow this video, but its very hard to get footage with. https://www.youtube.com/watch?v=qufWSNPyeYQ

Gaming Memories

Any chance of one coming soon?

SiNKiLLeR

:(

Daniel

I can't reproduce it with the game running in windowed mode (which I use), not with SRWE and not with the UUU... followed your exact steps. I also can't reproduce it with the game running in windowed fullscreen btw. Weird! (well, it works as it should, but odd you run into this. I use the steam version btw). I'm in the 3rd zone btw, perhaps that's related too.

FransBouma

hmm. so resizing the window will reset the fov in the settings to 60. Will see if I can reproduce this with SRWE alone, so no uuu. I still suspect it might be related to the black bar removal/aspect ratio limit removal but perhaps not. will see.

FransBouma

Ok, I think I might have figured out the pattern, and why it's not happening on every game load, but rather on every game load after hotsampling. The steps to reproduce: 1. Open the game, set FoV to something other than default, let's say, 80; 2. Load the game, verify it's still 80; 3. Atl-tab, inject UUU, hotsample, alt-tab to game, make a shot, alt-tab to UUU, fake fullscreen to revert hotsampling; 4. Open settings, see that it's now set to 60, but what you see in-game is actually still 80; 4.1. Any load after this reverts it to 60 in-game as well. 4.2. And if you adjust the settings after hotsampling back to 80 again, nothing will change visually, but the game load will not revert it to 60. Hope this helps a bit.

Anton Pavlov

No, my monitor is 16:9, I run the game in borderless fullscreen, which is 1440p, and then before each shot I hotsample to 16:9 4k or to 4:5 4k equivalent for vertical shots

Anton Pavlov

No, as it doesn't cause issues when hotsampling here, but I recon you too have an ultrawide monitor? I do too, and I think it's related to that. So my suspicion is that when you have the game running windowed in a 16:9 window, and then inject (so a save has been loaded), and *then* hotsample to your monitor's resolution using 'Fake fullscreen', it will keep working.

FransBouma

Not atm

FransBouma

Oh hey, resizing the window... maybe it's not doing it after injection, but rather after hotsampling

Anton Pavlov

Will there be a cam for Monster Hunter Wilds?

SiNKiLLeR

Well, I can't reproduce it after I inject after the initial load and not resizing the window. (so it loads in a 16:9 window). I don't know why it resets the fov after loads sometimes... It's not my code, that's for sure :) Also why it happens only sometimes suggests it's not an easy bug to find. I haven't seen this with any other UE game, so my suspicion is that they have a problem somewhere, but where is a bit problematic. I have the steam version and I had / have the same issue so I don't think it's gamepass specific...

FransBouma

I usually inject UUU some time after playing, it can be from 5 to 30 minutes depending on when I see something worthy of a potential shot. So it's always after loading a save. And indeed it's not every game load, but seems like 3 or 4 out of 5. At first I thought that maybe some odd value works fine, like 77 or 81, and it did work for a couple of loads, but then after some fast travelling it reverted to 60 again. The way I discovered it is that I actually wrote to Obsidian support with this, they asked me for a visual demo. Obviously for this purpose I had no reason to inject the UUU, and to my surprise it didn't reproduce. Maybe Steam and Game Pass version do differ a bit though

Anton Pavlov

I can't reproduce it when I inject the UUU *after* I've loaded a save. Once I've done that all saves keep the FOV as set in the menu. very weird

FransBouma

It's present in the steam version as well... I noticed that indeed. I thought it was the game as it doesn't always does this and the UUU doesn't set the FOV at all. It does set the fov type based on aspect ratio but it's setting it to the game's default by default so that can't be it either... Will see if that indeed doesn't happen with UUU injected (tho it doesn't always happen on load I think, but quite often to be annoying)

FransBouma

Hey there! I think I might have found a peculiar bug with UUU v5 injected into Game Pass Avowed. I'm not sure if it's reproduced in Steam version. It seems like UUU affects the games settings, specifically the FoV bar, and it gets reset to default 60 after any game load: fast travel, quick load, region change. Interestingly enough it doesn't happen without UUU injected.

Anton Pavlov

Nevermind I figured it out. If you use the "Custom FOV" mod from nexus it breaks the camera. Bummer

Gaming Memories

It says "camera found" but nothing happens when I press insert

Gaming Memories

Hello Otis. I have been using the Darksiders II camera unlocker successfully for quite some time. Recently windows defender flagged it. I restored it. Re downloaded it but now the camera wont be found. I can disable the hud and use other features but the camera stopped working. Any hints?

Gaming Memories

Please use UUU v5 :)

FransBouma

Hi! Wanted to ask if "Lost Records: Bloom & Rage" would be compatible with your UE unlockers or if this game would ever get a photomode mod! <3

Yaoomi

yes! thank you so much! <3

Kileigh Ward

You mean IGCSDOF? https://github.com/FransBouma/IgcsConnector/releases/tag/v252 Please see the guide: https://opm.fransbouma.com/igcsdof.htm

FransBouma

i was right, it was an issue on my part lmao. i was using UUU4. but quick question - i've only ever used your cameras for BG3 and CP277. with the otis add on for reshade, where can i find the .ini file to put for reshade so the camera can connect? or if theres a file at all.

Kileigh Ward

You have to use UUU v5. Did you try the latest version?

FransBouma

hi there! do any of the current versions work with silent hill 2 remake? so far i've tried 3 seperate versions but the game crashes each time with a 'exception access violation' error. not sure if it's the camera or something entirely on my part (which i wouldn't be surprised if it was me lol)

Kileigh Ward

https://framedsc.com/GeneralGuides/universal_ue4_consoleunlocker.htm

FransBouma

Otis_Inf can you give me a link to UUU 4 v3.0.14 unlocker please?

Crazy

oh i see thank you for the info

Hi

No, I'm sorry, my mistake, after making so many custom camera's I sometimes confuse one another and if I had added a special checkbox for a specific game to the UUU or that I disable the DOF automatically when the camera is Enabled. For FF7 Rebirth, in the UUU 4 (so not Remake, which requires a cheat table attached to the UUU v4 post), the dof is disabled when the camera is enabled. No post processing settings work in this game... See also the game list: https://opm.fransbouma.com/uuuv4.htm#games-that-work-with-the-uuu

FransBouma

i'm sorry, i'm not sure which checkbox you mean, if you mean the post processing dof settings, i can turn them all on but the dof will remain off in regular non video cutscenes the dof will be on, until i enable the camera with uuu, then it will go off

Hi

And the DOF isn't disabled in cutscenes that aren't videos even though you have checked the checkbox? And you don't have any other mods?

FransBouma

no errors mentioned in the log tab or the word error showing up in the log file i'm using version v4.9.10

Hi

That doesn't work anymore? Do you see any errors in the log tab or .log file?

FransBouma

hello, are there any plans for a fix with the ff7 rebirth dof turning off during cutscenes when enabling UUU?

Hi

I'm afraid that's not gonna happen...

FransBouma

Hi! For Virtua Fighter 5 REVO please!

shh233

Was wondering the same thing. SO keen for that.

SiNKiLLeR

Will start developing it tomorrow (wednesday) :)

FransBouma

Hi! Are there any planned photomode tools for Kingdom Come Deliverence 2?

Paweł Wrzesień

Looking forward to camera mode for Spider man 2 😁

Mateus Souza

UUU v5 works, partially. No pose tooling tho

FransBouma

Would it be possible to create a camera mod of Ninja Gaiden 2 Black, please?

Eevee

That can happen if the process(game) is closing its thread so fast the dll can't send a message to the client that it has ended. The client doesn't poll regularly if the game is still alive.

FransBouma

I found the bug: UE unlocker 4 and 5 (any version) freezes if game is closed intentionally before UE unlocker is closed. Using Task Manager to end process does not work normally (I need to go to Details and select Kill process tree)

Dmytro Ostapenko

The UUU v4 will be updated later today. I have it working now :) (Well, for the most part)

FransBouma

Hi! Thank you for the mods! Any chance we'll get one for FF7 Rebirth also? Thanks!

Meljay H

RE Framework removes most of it, but that's basically to run scripts, if you want to reverse engineer a game engine to create the tools I make it's often not enough (like with DD2 )... If it's 100% removed, then perhaps, but not atm.

FransBouma

Uhh I'm not sure if I miscommunicated, but I asked in last question if someone managed to remove anti-tamper from the game, so obviously then it wouldn't be interfering with your work anymore...

Creidhne

No, not at the moment. The main issue is debugging while developing the tools. I had the same issue with Dragon's Dogma 2: the amount of crashes due to the anti tamper were so frequent that it was impossible to continue.

FransBouma

Would you change your mind if someone else made a bypass for it, similarly to Stracker's Loader for MH World?

Creidhne

No, sorry. Capcom games have anti tamper nowadays which is pretty annoying to work with and I therefore stopped making cameras for capcom games.

FransBouma

Hey, any chances for the camera mod for upcoming Monster Hunter Wilds? There likely will be a bunch of new monsters, and having a camera mod is absolutely phenomenal to grab lots of references for artists

Creidhne

I thought about it but decided not to do it. Skyrim already has a good photomode mod on nexus including lights and bone editor

FransBouma

What about a camera Mod for Skyrim AE/SSE

Anthony Cunningham

I haven't looked at them, as the graphical fidelity isn't really good IMHO. Making cameras is a lot of work so I can't build cameras for every game out there, so I pick the games that are reasonably good looking and/or give nice subjects to shoot/take videos of. While I'm a big tomb raider fan, I don't think it's worth the time. Sorry

FransBouma

Hello, thanks for your camera mods. Have used them off and on for a few years. Looking forward to the PC release of Marvel's Spider-Man 2. Have you looked into Tomb Raider I-III Remastered camera? The game has a photo mode, and a way to enable a free cam with command line, but would be immensely better with your mods to do camera paths and other tools.) Tomb Raider 4-Angel of Darkness Remastered releases 14 Feb 2025, as well.

Jeremy Ledford

It's an unreal engine based game, have you tried the UUU?

FransBouma

Hello! First I want to say I appreciate all of your hard work! I enjoy using your Camera Tools! Would you ever consider making one for the game Pacific Drive? It's a smaller Double AA compared to the usual AAA games you do, but after playing the game again recently, I realize just how beautiful the world in that game would look with one of your Camera Tool!

TechnicalGator

Thanks for the answer! I wonder why it (hotsampling) works sometimes. And sometimes - it does not. The game is really unstable. I guess we need to wait for the patches.

Paweł Wrzesień

device hung/removed means simply that there was a low level gpu crash and it had to stop. If hotsampling causes this, this could be anything, but most likely a problem in the engine. If something looks bad in a game, then I can't fix that, sorry...

FransBouma

Hi! Is there a way to make Universal UE Tools more stable with "Stalker 2"? It works well untill one tries hotsampling. "Stalker 2" crashes then (quite often) with the message: LowLevelFatalError [File:D:\STALKER2\s2editor\Engine\Source\Runtime\D3D12RHI\Private\D3D12Util.cpp] [Line: 880] Streamline/DLSSG present failed at D:\STALKER2\s2editor\Engine\Plugins\Marketplace\Streamline\Source\StreamlineD3D12RHI\Private\StreamlineD3D12RHI.cpp:430 with error DXGI_ERROR_DEVICE_REMOVED with Reason: DXGI_ERROR_DEVICE_HUNG Stalker2_Win64_Shipping Stalker2_Win64_Shipping sl_dlss_g sl_dlss_g sl_dlss_g sl_dlss_g sl_interposer sl_interposer Stalker2_Win64_Shipping Stalker2_Win64_Shipping Stalker2_Win64_Shipping Stalker2_Win64_Shipping Stalker2_Win64_Shipping Stalker2_Win64_Shipping Stalker2_Win64_Shipping Stalker2_Win64_Shipping Stalker2_Win64_Shipping kernel32 ntdll I guess it has something to do with upscaling (?). Unfortunately, DLSS, TSAA etc. are needed in this game. Not because of the performance issues. This game running in native resolution is absurdly "grainy" (noisy). It's a well know problem for many people: https://www.reddit.com/r/stalker/comments/1gwfbz3/stalker_2_very_bad_grainstaticnoise_on_foliage/ Upscaling is necessary if one wants to use photo mode in "Stalker 2". (Although it creates strange graphical artifacts on weapons when I zoom in or out with the use of photo tools). I tried all the methods of upscaling (and different versions of UE Tools) and the game still crashes often if I use hotsampling. I guess it's the problem with "Stalker 2" and not the photo tools. But perhaps there's some solution that would allow some of us to take great pictures in this game with the use of UUE Tools? Because it looks gorgeous... :)

Paweł Wrzesień

later this week

FransBouma

will we get a photo mode tool for the latest indian jones game?thanks!

Fahad Hossain

oh, sweet! Sorry, I didn't notice it! Thanks!

Cinematic Series Gaming

I updated it this morning

FransBouma

Patch 1.4 in Star Wars Outlaws broke the tool once again. Could you possibly update it? Pretty please :3

Cinematic Series Gaming

Can you make a free camera tool for inside plase think you

Jordan B

No, sorry

FransBouma

any chance of an armored core 6 mod?

ky kunt

it's ok. :) REST is quite problematic and often causes crashes you'd think are caused by the tools. No idea if that's what's causing it, but it's likely.

FransBouma

Yes the friend is a Patron, they just struggle with anxiety so they ask me to do this sometimes. Thanks for responding though, I'll try that next.

Cloak

IF that friend is a patron, they should post themselves. If not, they shouldn't pirate my software, sorry. The REST addon is kind of unstable at times. If it crashes, then perhaps ask the dev of REST?

FransBouma

Hi, is Unreal Engine Unlocker 4 compatible with the REST ReShade addon? The Unreal Engine crash reports usually list both when launched on Deep Rock Galactic (asking for a friend).

Cloak

In theory, yes. In practice... no, it takes a lot of time for little gain (as it's a very old game). Not sure if this cheat table still works tho: https://framedsc.com/GameGuides/MadMax.htm

FransBouma

Hello, would it be possible to do it for the Mad Max video game or is it something that could not be achieved, I'm just asking because I would love to. Thank you in advance.

JONKET

I won't make tools for RDR1, sorry :)

FransBouma

Will you make camera tools for Red Dead Redemption 1? It just came out on PC, and a free camera mod would be amazing!

Cinematic Series Gaming

411 all is good. It downloaded fine today win no antivirus warring. I did have to do anything.

tim

Thanks Otis , I am not using a virus scanner or at least one that i I know of. Not sure what a bite defender is. Your last 1.0.02 downloaded great and still does without saying anything. I trust you and am going to let download it now. I will let you know if I have any weird issues. And not really sure what Ikarus detects. Thanks again for the help. Much appreciated and your stuff is awesome

tim

Thanks for answering!

Pablo Coronel

See: https://www.virustotal.com/gui/file/283210d4cd6504477a78925183c6191537ff717a2cad84ddea42ffc7af012356?nocache=1 Google usually traps over the windows API calls I use for injecting a dll (which I have to do... ) and overwriting memory of a process (which is of course in general a good thing to alert on, but I have to do that to hook into the game). No idea what Ikarus detects, never heard of it.

FransBouma

Yes that's a false positive. it's strange tho, I sign my files with a certificate, and most virusscanners then don't give false positives anymore. You're using bitdefender?

FransBouma

Star Wars Outlaws 1.0.3. First thanks for updating this so quick Otis. Windows says it has a virus and stops the download. I pretty sure I am good to go? I am just checking with you first.

tim

everything related to replay is out of the question, no engine supports that in a shipped game

FransBouma

In fact, it does have a lot of additional features, which I would like, but it's just a wish, the ability to modify the current cameras, position, fov, etc., and the ability to save them, at any instance of the game, menus, in-game, replays. That would be epic. In fact, I have a patreon, if you see it you might understand why I want it and if you could recommend me that would be great. I already do it with you. patreon x pay2021

Pablo Coronel

what for additional features would a custom camera possibly offer that the UUU doesn't, as the UUU has way more features than any custom camera

FransBouma

Its a game from the same studio and yes, UUU works, i just think maybe can have some aditional features. Thank for the response!.

Pablo Coronel

I think there's a moto gp game made with Unreal engine 4 (which should work with UUUv4 but I don't have the game so can't test), otherwise no idea what game that is. But regardless, if it's not unreal engine, I'm not doing cameras on request, sorry. If it's unreal engine, it might be it works with the UUU I made

FransBouma

Can you do one for MXGP2021? thanks!!!

Pablo Coronel

No, I understand!! Thank you so much once again, as well as your quick answer!!

Samantha Eilhart

No, sorry, call of duty games have anti -cheat and I'm not going to burn my hands on that...

FransBouma

Hi! I was wondering if you would ever release a Camera Tool for the new Call of Duty Modern Warfare games, the ones that were released in 2019-2023? Thank you! and P.S. Once again I need to thank you for the amazing work you do! Love your Camera tools! 🙌

Samantha Eilhart

I think the UUU v5 works with it

FransBouma

Never mind, I already found the console. Loving this tool, saved me by a lot. Dankjewel!

Antonio Saldaña Perez

Just new to UUU, looks very useful. Is there any way to see what the scale percentage is of the preset selected with TSR? Just curious what the devs implemented

Antonio Saldaña Perez

Any chance on forever winter camera tools?

ALEXIS CASSAR

Thanks, work great!

Huy

An older version, but Ghost in the Camera made a camera for sekiro using my IGCS system: https://ghostinthecamera.co.uk/sekiro-tools

FransBouma

I hope you can make the camera tool for Sekiro, it use the same engine as Elden Ring after all.

Huy

Hey. Any chance for IGCSClient for Until Dawn?

Vladislav Strimell

I think Silent Hill 2 remake is made with UE5, so the UUU v5 should work with it

FransBouma

howdy will you have one of these camera mods for Silent Hill 2 remake? if so when could we expect it :))

RuffledRowlit

I never played NMS and it has an ok photomode now I think, and conan exile is unreal engine 4 but online multiplayer, so that's a 100% no-go

FransBouma

Surprisingly I don't see anything about No Man's Sky and Conan Exile

Ar Murazor

Make sense, thank you!

Sindy Jb

Not when it's in early access as these kind of games then tend to get a lot of fixes which is a pain, plus the game isn't finished at the moment. Will look at it when it goes out of early access

FransBouma

Hi, any plans for Greedfall 2 tools?

Sindy Jb

think you SO MUCH

Jordan B

Also looking forward to this! thank you!

Viktor Velkov

patiently waiting for GoW Ragnarok :)

Viktor Velkov

Thanks as always. Look forward to this tool!

Yowza5891

really looking forward to it!Thanks!

Fahad Hossain

In a few days, maybe tomorrow even :)

FransBouma

any chance we will get the ragnarok tools?thanks

Fahad Hossain

The in-game photo mode isn't too bad when you install the noclip mod from the SM2 nexus :) it's a bit fiddly with the patch but the instructions are there to follow. I also recommend getting the chromatic aberration and black bar remover mods too.

Sammy P

Yeah you can turn off the UI, turn off the filmic smear in cutscenes, pause in cutscenes, use the camera in cutscenes too, remove dof etc. :) Shadertoggler can remove the UI too if you want to use that now

FransBouma

I hope so the UI is too much imo. There will probably be mods on nexus before too long for it as well

Gaming Memories

Waiting on that! Will we be able to turn of the HUD/UI elements? I'll keep an eye out for the camera tool. Thanks again for everything

Voyagers Revenge

Will be tomorrow. 90% done with it on the demo and the game is a bit different so requires some fixing. But it's worth the wait :)

FransBouma

May the gaming gods bless you!

Gaming Memories

I hope to be done by the end of the day but i'll use the demo for building it so it might be the final game is different and then it's going to be tomorrow or so :)

FransBouma

I really hope you bless us with FF16 soonish after release. Hear my prayers oh great Otis god!

Gaming Memories

haha I know, but due to the cumbersome anti cheat and the Game Science trackrecord I decided to fall back to a simpler cheat table for the photomode. See the guide: https://framedsc.com/GameGuides/spacemarine2.htm

FransBouma

Warhammer 40,000 Space Marine II camera would be very interesting!

BARRY JENKINS

The UUU works in some racing games made with unreal engine, but other than that, no

FransBouma

do these mods work for racing games?

Bryann Guzman

No, I'm sorry. I do recall it was on reddit but it was quite a while ago.

FransBouma

Okay thanks for the quick response, do you have the name of the person who got it working on Steam Deck please?

Sélian Waterlot

My tools only work on windows. Some people have managed to run them on steamdeck but it's not supported, so I don't know if it will work...

FransBouma

hello, do you know if this works on steam deck? because I tried but when choosing or injecting the file, I cannot choose a file

Sélian Waterlot

No, sorry

FransBouma

Phyo Wai

Ah, forgot about that. Sorry! :)

The Nightingale

Use Univeral Unreal Engine Unlocker v4! https://www.patreon.com/posts/55048344

FransBouma

Do you no longer have Hogwarts Legacy?

The Nightingale

That is a Unity based game, so you could try CUE, https://framedsc.com/GeneralGuides/cinematic-unity-explorer.htm

FransBouma

Could you make "The Legend Of Heroes Trails through Daybreak" camera tools?

みみ うさ

It doesn't have that feature, it only allows to change the ToD

FransBouma

Phyo Wai

In theory I could but I won't make a camera for that old game, sorry

FransBouma

hi can you do Darks Souls cmera tools please!

Deuce

It always has been the Universal Unreal Engine Unlocker, https://www.patreon.com/posts/55048344

FransBouma

what happened to the Jedi survivor photo tool

ONIXIL

Been a fan for years and saw countless screenshots with your tools. I finally have a good PC & decided to sub. As an amateur IRL photographer, your tools are amazing. Nice to take some in-game shots when the weather sucks outside :) Thank you!!!

Matt Evanst

Hi Otis! Came here after seeing the Inquisition drop, bless up <3 Just curious if Hogwarts Legacy is on your radar now that they have their own dedicated (crappy) photomode?

xKairii

Yeah they do actually. I think it's just snowbreak being weird. No anti cheat on steam but there's one on their launcher version. Thanks for your input tho

Jawn

Might be the game has anti cheat? Free games usually do that to some extend.

FransBouma

Snowbreak containment zone (free). The steam version is hook-able but not from their official launcher. Wuthering waves that isn't on steam, only their official launcher and maybe epic (I don't use epic launcher so I don't know)

Jawn

I'll check. Thank you !

Alexandre Meunier

which launcher/game are you referring at exactly?

FransBouma

Well some do, I see it on my explorer window. I run it from the launcher normally, I didn't temper with the exe And about that other game that shows up only on steam version, needless to say I tried launching both in the way it's intended , aka from the launcher

Jawn

For a while the UUU v5 worked with lords of the fallen 2023, however they cranked up their anti cheat so not sure if it still works. Please check the UUU v5 and the gamelist for details how to disable anti cheat (if that still works) https://opm.fransbouma.com/uuuv5.htm#games-that-work-with-the-uuu

FransBouma

Games don't have an admin icon besides them, just run the game from steam, or the store you bought it.

FransBouma

I've checked the game's executable there's an admin icon on it but in the properties the box "run as admin" isn't ticked yeah the tool can't find it Can anti cheat programs affect the hooking?

Jawn

Hi ! Thanks for your work, such amazing ! I've a question, in the list there is "Lords of the Fallen 2014". Do you know if there is a possibility to have tools for Lords of the Fallen 2023 ?

Alexandre Meunier

Oh I didn't know that, thanks a lot. I usually don't change that setting so probably default got me there

Jawn

don't run the game as admin

FransBouma

I was wondering, what's the reason why sometimes games don't show up in the selectable executable to inject the camera? In case of UE game while using the UUU (the correct version obviously). Also I had this weird issue that the executable shows up when I try to inject the tool in the steam version of the game but not in their official launcher version despite it being 100% the same game.

Jawn

Ok so I managed to download it with no issues and it's working as intended. Thanks.

Joji46

I've updated the mgs5 camera tools (recompiled it, added a better injector), please let me know if it still gives problems

FransBouma

Honestly I'm not sure, but I forgot to ask after they replied to me.

Joji46

so is there anyway to download it?

howdy

No, nothing's wrong with it, but it's a very old camera, built with an old Windows SDK. The Windows SDK code is embedded in the dll so you don't have to install that, but it traps up virusscanners sometimes with their machine learning 'filters'... :(

FransBouma

Is there something wrong with MGS5 tools? Chrome keeps trying to block the download and even after stopping that Windows defender like immediately removed it after flagging it as a virus.

Joji46

Actually nevermind I found out it's possible through UUU4, gonna look at how to use it (I'm so new to using mods).

Kagura Baka

Just wondering, going to try out both Nier photo mods, but did you also do one for Persona 3 Reload (if so is it still available?)

Kagura Baka

Maybe one day...

FransBouma

Another odd request, but any chance for making a simple tool for The Hunter: Call of the Wild series? The original cinematic tools mod maker has abandoned his updates. The games are really beautiful and are badly in need of your camera tools @otis_inf

The Explorographer

Sorry. UUU_v4612 is perfect work. Thank you :D

iy

Hello, I want photo mode on SandLand. UUUv.5.15 is work. but camera don't move :(

iy

Hi, trying to use the TR2013 with steam and a window pops up that says ‘waiting for camera struct interception’. Nothing is happening

Abigail Rice

Have numlock on to use Numpad 0 for pause and use the insert key next to the backspace key (in the block above the cursor keys) to enable/disable. If you don't have that second insert key, have numlock on and press Shift + numpad 0 to do enable/disable the camera and just numpad 0 to pause/unpause

FransBouma

Hi, I am using the Ryse: Son of Rome photo mode. I want to pause the game but my Numpad 0 button is also the Insert key... how do i only use the Numpad 0 function

Helafiñwë

I made a camera for RE 2 remake. I won't make cameras for old RE games.

FransBouma

Hello, could you please take a look at older Resident Evil games based on MT Framework? Particularly Resident Evil Revelations 1 (less so) and 2 (more so) are games that would interest me to take some shots in and right now there really are no tools for those games. I would appreciate it a lot if you could look into those at some point, though I understand that you are very busy and that these games would not be your priority.

Von

Hi! First of all - thank you so much. Using your tools really inspires to replay some earlier played games again with way more attention. A question though: FRAMED refers to your tools for DOOM Eternal, though I could not find any mention of it here. Was it removed, and if so - any chances to revive? I was able to kind of resolve it, but still am curious.

Mancubus.UA

Oh yeah, you're right, I think that enigma protector is messing things up. Dang it, hopefully some future reframework update will fix that...

Jawn

From how it's looking now: the capcom anti-cheat layer currently prevents me from building the tools, even with the latest RE Framework version. Perhaps a solution is found soon, otherwise it's ... not going to be possible...

FransBouma

Back to being a supporter haha, had a 1 month break. I hope we will get a Dragon's Dogma mod, the in game one is like really bad D:

Jawn

That would be amazing. Take all the time you need.

NostalGeek

That'd be fantastic! 🙏

Zach

oh my god this would be so awesome thanks

Alo Graham

Online game (with anti-cheat), so a no-go

FransBouma

Hey Frans, a question. Do you have any knowledge of free-cam tools for the Halo: MCC? The Halo modding scene is quite vast and difficult to find any tools for either of the games that come in the Master Chief Collection. I know the game has theatre mode, but it's tedious to use when compared to your tools. Just thought I'd ask in case you've ever came across anything. If not, had you ever considered to develop tools for the series? Thanks for reading!

Gaming Ambience

I'll work on that soon, but first a small break after hfw

FransBouma

Will there be any plans for Dragons Dogma 2? The photo mode it comes with is buns lol

Nem Plays

Can't wait! Thanks for all that you do!

Yowza5891

Hopefully it'll be ready at the end of the day!

FransBouma

Any plan for Horizon Forbidden West?

Gaming Memories

Awesome, thank you!

richietheguru

My bad, I forgot to link the page with the tools in this post. You should be able to use the link above now to shortcut to the post.

FransBouma

I don't think I see Rise of the Tomb Raider, are those tools no longer working?

richietheguru

The 5.9.2 works fine, but when i update it to 6.0, the game is too laggy, i can't even access the menu

Zavarof

I tried both, 6.0 and 6.0.1, but it's the same result. Even with basic version or addons one.

Zavarof

You tried 6.0.1 hotfix? I used 6.0 with CP and it works fine, perhaps it's a mod or addon that messes up?

FransBouma

And since i udapted cyberlight too and deleted the old version, i can't use it anymore

Zavarof

Well i don't understand why, but when i update reshade to 6.0 or more, When i start cyberpunk it's like 1 fps, so impossible to play

Zavarof

No, sorry. And what does too slow mean? 6.0 works fine here.

FransBouma

Well, i can't play at Cyberpunk with the new reshade version (6.0) because it's too slow and i can't get cyberlight anymore because i have the latest one... Oh can i get back the older version?

Zavarof

if you go on nexus, there is a mod for mhr called REframework, which includes a free cam. it's not as intuitive as frans tools, but it gets the job done lol

Euby Gaming

I can't create cameras for every game that's released. As it's an online game I won't create a camera for it. I did for MH World, but as it was a struggle (with the anti-cheat mods etc.) I won't do another MH camera

FransBouma

The UUU would normally cover that but they changed so much in the engine that it wasn't possible to make it compatible.

FransBouma

It would be great to have a camera tool for The Callisto Protocol.

Crusade588

Why is there no Camera Tool for the MH Rise?

Sashaxx

I could but I won't, sorry!

FransBouma

happy holidays man your work is amazing, a quick question, is it possible for you to make freecam tools for Control and Quantum Break? they use the same Engine as Alan Wake 2

Mahmoudreza Javidi

Nope, and I also won't make them, sorry!

FransBouma

Do you have camera tools for Far Cry Primal?

Evangel Sektor

That depends on the game. Some games mix sound where the camera is, but others where the player is. So moving the camera away might mean the sounds you hear are still the sounds around the player and not the camera.

FransBouma

First off, Happy Holidays. I have a quick question, I am trying to do AMSR vids using your tools. Is there any way to get the sound to follow the camera rather than be from the player character's position? This is most noticeable in Spiderman and Assassin's Creed games or at least what I have checked so far. Thanks for your work!

The Explorographer

No, only official releases.

FransBouma

Hello, does your camera tools works on cracked games as well ?

Mory Camara

I FKN LOVE YOUR WORK

Michael John Eaton

These are absolutely amazing thank you for them

Taunt Titan

Might be an ue4 game? Please try the UUU v4 https://www.patreon.com/posts/55048344

FransBouma

Hello I subscribed after watching a hidden secret video of Dimon Slayer but I don't think there's a photo mode of the game here

하곰

Tools for game X don't work for game Y. The DMC5 tools are meant for DMC5 and they do allow you to dynamically change the resolution.

FransBouma

Hello, Frans Bouma, I'd like to inquire about the Detroit: Become Human Free Camera Tool. Does it support resolution adjustment for Devil May Cry 5? I'm interested in capturing photos with an 8K resolution for post-processing. Please assist me with this. Thank you.

Hank. li

you really have to be more specific: which game, what depth of field (IGCS DOF? ) and 'it doesn't work' what does that mean exactly?

FransBouma

Hey, thank you for this, it's really cool and I love it! I am having an issue with the depth of field tho, and didn't know where to ask you about it. I installed it properly, follow the tutorial and everything, but the depth of field still won't work for me and I don't know how to fix it. Is there any way you could help?

Lu

One of the best Patreon deals, thanks for share you talent and effort.

Vic Slider

every month, i say hey, frans doing an amazing job, and every month u're still the best around, cant waint this game is soooo vp-able

t12lve

You're an absolute legend sir 🙏

GravX

Hopefully done by tomorrow :)

FransBouma

Hey otis!Is an Alan Wake 2 PT kit on the table?

GravX

Nope, sorry. Anti cheat is too strong in this game.

FransBouma

Any plans for an Armored Core VI tool?

Tristan James

Thanks! I got it worked, a free move camera that's all I need!

Sen Du

After you've placed the txt file into the folder with the win64-shipping exe, run that exe and wait till the menu, then start uuu v5 and see further here: https://opm.fransbouma.com/uuuv5.htm

FransBouma

Hello, still me :). I tried to use the camera mode for Lords of the fallen 2023, cause I really need it, can you help me kind of step by step? I think I already disabled the anti-cheat

Sen Du

I give you the link even, just follow them, please :)

FransBouma

Thanks for the reply. Unreal Engine 4 or 5 ?

Cuddles Gaming

In case you want to use it with the Lords of the Fallen game that released last week, you need the Unreal Engine Unlocker v5 (https://www.patreon.com/posts/83234146) :) The Lords of the Fallen camera is for the game from 2014. The 2023 game has anti-cheat, which you can disable by following the descriptions in the v5 game list: https://opm.fransbouma.com/uuuv5.htm#games-that-work-with-the-uuu

FransBouma

I downloaded the Lords of the Fallen Camera mod. I opened both the game and the mod as administrator but I get an error saying it can't find a process named "LordsOfTheFallen.exe". How can I fix it ?

Cuddles Gaming

No idea what you mean

FransBouma

Can you update the modified resolution of Detroit: Become Human?

carrr

Perhaps, game has anti cheat

FransBouma

camera mode for Lods of Fallen please

Sen Du

非常感谢，继续支持你，我想在YouTube关注你！

Amy Chocolates

Thanks for the tools dude. Been having a blast with them so far

Sammy P

I apologize if this has been asked, but I searched and couldn't find it. Do any of these mods have support for Snowrunner?

Pioneer898

today or tomorrow

FransBouma

when will be out acmirage cameratools? CA is terrible

GameLover

that's not configurable, I'm afraid..

FransBouma

OK, just one follow up on this from me. Your suggestion does provide the solution I was after, but with one small problem. I'm using a macro to achieve a "slow-down" and "speed-up" over time effect with the keyboard shortcuts from your camera tools. Where can I tweak the increment by which it changes? The problem right now is that it moves by 0.05 each time. And I can't set the key delay any lower than 80ms or it starts skipping commands. So to go from GameSpeed 1.0 to GameSpeed 0.3 takes about 1.5 seconds, which is quite long. Ideally, the whole transition would be 300-500 ms. I presume I should be able to tweak this by opening one of the files and just changing (e.g.) 0.05 to 0.1 or 0.15 ...but I don't know where to do this!

Alex Boisot

the gamespeed slider in the image adjustments tab? Also has kb bindings https://opm.fransbouma.com/Cameras/eldenring.htm

FransBouma

Hey mate - sorry if this has already been asked, but is there a way to to get a gradual speed change rather than just "On/Off" speed modifier? Using the Elden Ring version in case it's relevant.

Alex Boisot

Thanks Otis, knew I was doing something wrong. Keep up the good work!

Daniel

use uuu v4.6.x. uuu v5 is for ue5 games (and this is a ue4 game)

FransBouma

Hi Otis, does the UUU not work with Jedi Survivor anymore? Wanted to give the game another go but the UUU is crashing my game now

Daniel

1) please don't comment on a random post about a specific camera. This is about the UUU I recon? which version? please be specific. 2) Please read documentation, it contains what you want to know: https://opm.fransbouma.com/uuuv4.htm#dumping-cvars

FransBouma

Do you have a list of console commands? I'm using toggledebugcamera and it doesn't work anymore

matheus

You could try shader toggler: https://framedsc.com/ReshadeGuides/Addons/shader_toggler_repository.htm

FransBouma

still amazing job love it so much. do you have a tip to remove hud in atomic heart ? the keybind remove some elements

t12lve

Amazing work. Seriously.

takal

Hey mate. I'm a complete Novice with this Tool, But I Joined your Patreon because I saw that in a Youtube Vid (in this Case) AC: Odyssey the Uploader using this tool) Set his Camera Angle then Played with said Camera Angle. Not to be rude, But what Do I need to do to Set my Camera Angle Then Play with it? If you need to me to link the Video I'm Describing then that's no problem! Thanks Mate! :)

Matthew Richard

Hmm, it's still on there? Will do. Sorry about that.

FransBouma

Bummer. Ok thanks. I guess you can remove it from your list of compatible games on your UUU page.

Yowza5891

Correct, they changed their engine quite a bit after release and it's no longer compatible.

FransBouma

Wasn't sure where to post this question so I'll do it here: Tried using your UUU tool for Ghostwire Tokyo. It says it was injected properly but activating the camera only freezes it in position. Also clicking DEL to hide the HUD does nothing.

Yowza5891

Came to ask this!

Epicene Blue

That's a shame. Is there any way to roll back the version of the game until the camera mod works? Maybe they could be left up but marked as outdated, or marked with the last working game mode? Seems a shame to lose the mods.

GG

if you ever feel like you have free time, please make one! it's such a gorgeous game and I'd love to honor it with some photos, no pressure though

s david

I see you were able to add a long-time requested feature of mine to add a command to delete the camera path. Thank you!!!

Yowza5891

https://framedsc.com/GameGuides/rdr2.htm

FransBouma

Good day, sir. Didn't you make a camera for rdr2? It doesn't work anymore?

Artyom Tsibulko

https://www.patreon.com/posts/55048344

FransBouma

Will Dead Island 2 be added to this?

Lonelyhousecat

That did the trick, thank you!

FavoriteDarkness

4.6.3 has problems I've heard. Try 4.6.2, still attached to the UUU post. 4.6.3 has some new code which apparently doesn't work very well with this particular engine, so I have to look into that when I get the game

FransBouma

I disabled that, tried running both as admin, still nothing. I have downloaded the latest version 4.6.3.

FavoriteDarkness

Huh, sad. Welp, have sum money anyways. Pretty cool what you doing afterall :3

DeerEross

Disable ea overlay

FransBouma

The list of tools is on the patreon page's main text, I didn't mention prey there as the camera has been broken since a couple of years now.

FransBouma

Hello. Is the UUU working for Jedi Survivor? It says that camera and client are active, but nothing happens when I press "insert."

FavoriteDarkness

Is there not one for Prey? That's what brought me here, a post of Prey Screenshots saying they were made with your tool 🤔

DeerEross

Looks like their last update was a month ago but yeah I totally understand!

Yowza5891

I pulled it as they updated it every week and I grew tired fixing the camera every other week or so...

FransBouma

Didn't you have a tool for Dying Light 2? Not finding it anywhere...

Yowza5891

That’s sad I was really hoping to get some decent screenshots. Thank you anyway. I’m sure if I dig around I’ll find something:)

Waffle 427

I checked if it was made with ue4 but it's not, so that requires a custom camera, so that's sadly out of the cards for old games. ...

FransBouma

Aw nuts. Thanks anyway.

Waffle 427

no, sorry :)

FransBouma

will their be a mod for stanley parable

Waffle 427

In case you were sarcastic, here: https://www.patreon.com/posts/63320272 :)

FransBouma

Thank you very much for your help!!! The instructions you wrote are very detailed!!! I can use your excellent cameratool now! Love you!

luo lemac

Check the ER post.

FransBouma

Will there the mod for Elden Ring1.08.ver or more?

luo lemac

No, sorry

FransBouma

Hi, Loving the Elden Ring Camera Mod. Do you plan to make any free camera mods for the rest of the souls series? or do you know of one?

Meta

No, sorry

FransBouma

Will there the mod for Wild Hearts?

HanChenYu

https://www.patreon.com/posts/55048344 UE4 -> UUU :)

FransBouma

Hi, love your work :) Hogwarts Legacy?

Jay Geldenhuys

THANKS! You're the best!

TheMercsAssassin

It's UE4 and my UUU works fine with it :) -> https://www.patreon.com/posts/55048344

FransBouma

Hey just asking when the mod will come out for Hogwarts Legacy :)

Neil Sharma

yeah it's a protection measure of windows. My tools inject themselves into the game process and change it at runtime which is something that obviously looks suspicious but it's the only way to make changes to the game at runtime... :)

FransBouma

EDIT - ignore me! Ha! My comp. was being overprotective and failing the download due to "this file type is not commonly downloaded" (of which I can override). Bonza! Hey Otis_Inf, amazing mods btw. Thanks! When I download the MGSV camera tool, it just downloads an empty zip file. Is that an issue on my end? The same is true for the Death Stranding v105 tool. Any help would be appreciated. Thanks.

James

The game appears to be rendering the characters on 2D planes at least with the camera used in-game, which is the one used by the UUU. So that's not going to be fixed.

FransBouma

Thank you for all these amazing camera mods. Is it possible to have a fixed photo mod for The King of Fighter XV?

Shanko

See https://opm.fransbouma.com/uuuv4.htm#games-that-work-with-the-uuu :)

FransBouma

Hello, Did you try for Hi-Fi RUSH ? it could have a good potential for Virtual photography and it's UE4 ( but i don't know if they customized it )

neroangelo

The Universal Unreal Engine Unlocker (UUU) I made has support for some of the Dark Pictures games, but their engine is customized so some things might not work, and the pagedown pause will sometimes break the game so you have to restart a sequence.

FransBouma

Thanks for your service, can you work on a photo mode for The Dark Pictures Anthology ? you rock.

Rey Vaski

Thank you for your help :)

OnlyMisu

If you run the game as admin (which is not needed) then the igcsclient also has to run as admin)

FransBouma

On both versions it dont show the application when i open the Camera Tool (ive done all steps from the Readme.txt)

OnlyMisu

It should work but I don't have the steam version, so I don't know.

FransBouma

Hey, do you make a photomode for Watch Dogs Legion for steam too? :)

OnlyMisu

Not at the moment, and not likely in the future too

FransBouma

Hello! Is there any way you can make one for Dragonball Xenoverse 2? Technically the developers already made one for the game but like ff7remake its a bit restricted.

Modseries

No

FransBouma

Hi Otis, do you have plans to make a free cam mod for L.A Noire?

Aproclis

BIG thanks !

Awesome! Thanks for making these photo modes for games. Really good stuff, dude.

Lee

Use the regular Mafia 3 tools for Mafia: Definitive Edition. Camera won't work in cutscenes tho. I didn't release a Mafia: Definitive edition camera as I couldn't get the camera to work in cutscenes

FransBouma

Any plans to add Mafia: Definitive Edition? I see you have Mafia 3.

Lee

Gotham Knights is UE4, the UUU works: https://www.patreon.com/posts/55048344 Tho yesterday they seem to have updated the game again which broke my fix for lights etc. which I hope to address today.

FransBouma

2nd time subscribing! will you be making one for Gotham Knights?

Set

Scorn -> UUU (unreal engine unlocker) Prey -> Made one but they moved everything to a dll and broke everything in my camera so I have to redo the research again and that's not going to happen I'm afraid

FransBouma

Are you planning on making one for Scorn or Prey?

Phil Meraska

All mods I have are available in tier 1

FransBouma

f0v3r

I figured it out. Thanks, I'll try that

Kadu

It's unity so hacking that will be a bit problematic. You could try the universal unity camera tho (it's cumbersome to use at times, but perhaps it works). See: https://framedsc.com/GeneralGuides/universal_unity_freecam.htm

FransBouma

Any chance of photo mode for Othercide, or can't do it?

Kadu

Thank you~

Anastasiia Zolotareva

Yes use the Universal Unreal Engine Unlocker :)

FransBouma

Hey, Otis. Is there a camera tool for sword and fairy 7? I saw your screenshots in twitter but cann't find camera here.

Anastasiia Zolotareva

I know Spider-Man was just released on PC but am curious when you anticipate releasing a tool for it?

Yowza5891

anti-cheat, so nope. There is a hacky one using the unity loader, but no idea if it opens you up for a ban. (I didn't create that one )

FransBouma

Is it possible to get a camera for Genshin impact?

nibble

Its a great news thx !! I look forward ! :p

Spy_Lekas

It's planned. I have to find the time to create it :)

FransBouma

Hello. Thx for your amazing work ! Possibility to add camera mod to FFXV or its too difficult ?

Spy_Lekas

Download my Universal Unreal Unlocker (UUU) v4 from its dedicated post and you're set :) (lights work too)

FransBouma

Any plans to add Star Wars Jedi Fallen Order?

LonelySailor

not at the moment, no

FransBouma

Hello. Any plans to add camera paths to WatchDogs Legion?

Yowza5891

yes

FransBouma

Hey mate, is the camera for Metro Exodus still working? I just purchased the game on sale for steam.

Voyagers Revenge

Use the UUU v4.x :) See the guide: https://framedsc.com/GameGuides/FFVIIR.htm

FransBouma

Hello! Will there be camera tools for FF7 remake? Thank you as always 💖

anya

Use the UUU v4.x. You can hide the full hud using showhud 0 on the dev console

FransBouma

Are there plans for a photo mode mod for The Outer Worlds?

Lee

Re2 and re3 are broken. Almost done with RE3 but not 100%. Will then see how much work re2 is

FransBouma

Thank you. The updates arrived yesterday.

afgncaap11

when the updates arrive I'll have a look

FransBouma

Hi Frans, just wanted to know if there will be an update to the camera tools for Resident Evil 2 and 3 after the new update which now uses DX12.

afgncaap11

Ah ok that's a real shame, hopefully a HUD workaround mod will arrive or something. Thanks for the helpful reply!

J

HUD in tales of arise is sadly not fully toggled since their last update. There are other problems too, see: https://opm.fransbouma.com/uuuv4.htm#games-that-work-with-the-uuu (at the bottom of the list)

FransBouma

Hi Frans - Firstly thanks so much for your hard work. I just had a q about UUU unlocker for Tales of Arise. Toggle HUD does not work for the game somehow after the latest update (I have tried 3.0.1, 410 and 4.3) but it still seems to not work. Is that because it is an issue with the build? It used to work before. many thanks.

J

No, it would otherwise be on the list. I made a cheat table: See: https://framedsc.com/GameGuides/rdr2.htm

FransBouma

Do you have a camera for Red Dead Redemption 2?

Blyat Man

not yet

FransBouma

No universal unreal engine 5?

nukacharlie

will there be a version for dark souls 3 and sekiro? that will be great

彥寬 李

in the coming days

FransBouma

Will you release a Death Stranding Director's Cut version ?

Fellipe Santos

Just curious if there's a way to hide the HUD on MGSV.. also any chance of a cam for a cam mod for Ground Branch or Insurgency Sandstorm? :)

BLVDES

I would like a free camera for Resident Evil 5.

yuki oono

Hey Otis, did you ever create tools for Control? I remember there being an old camera table around at some point or is it broken with more recent updates?

Daniel

It's impossible to fix as they changed their anti cheat code, hence I removed the camera

FransBouma

If I pledged to tier 3 would I be able to request a fix for the Injustice 2 camera, or is it just impossible to fix regardless because of the update?

Raven

It's progressing, but no promises as always :)

FransBouma

Idk if anyone already asked this but will you be making camera tools for Elden Ring?

anya

Nope. I do recall someone did, but I don't have the game nor have used that tool, so I can't point you to it.

FransBouma

Hey Otis did u ever make a battlefront 2 photo mode tool?

Randal Jez 19

Just discovered this tool - thanks so much for adding Dying Light 2 so quickly. It works brilliantly and I am having so much fun flying around practicing my photography!

jspps2

You could use the cheat table I made https://framedsc.com/GameGuides/rdr2.htm and indeed, it was just unbearable having to start the game over and over and wait for a minute each time :D

FransBouma

Alright, thanks for the reply and info. The long load times must make testing stuff like this a complete pain in the neck. Such a pretty game...but I guess it comes at a price. Take care.

Voider

I have worked on converting my cheat table for RDR2 to real tools but it turned out to be really cumbersome, the game's engine still stops working after x minutes of debugging and you have to start over. I had to do more research as I needed info regarding where the camera was (the cheat table works with the photomode), as the game takes ages to boot up, this became a true chore so I stopped for now. Perhaps one day..

FransBouma

Oh, also just a quick question. Are RDR2 camera tools looking like something that will ever happen? Was just curious. Thanks for all the other awesome tools, though. Take care.

Voider

Hey Frans, amazing stuff. Thanks for all the awesome camera mods.

Voider

I think I remember reading that now. Thanks for the (re)info.

Shane Wilson

Doom 2016 is broken and therefore has been removed

FransBouma

is Doom 2016 a higher tier mod? The Framed wiki for DOOM leads to here, but doesn't say what Tier it's in. And I can't find it through tier 1 tags or otherwise.

Shane Wilson

It is an old camera and it doesn't have a binding menu for gamepad buttons but a gamepad should work fine. However the camera uses the xbox control input. So if you're using a PS4 controller with your PC, you have to use DS4Windows to make it appear as an xbox controller. Once that happens, the tools will see it (as it uses the XInput system for controller input, which works with xbox devices. DS4Windows can make your ps4 controller look like an xbox controller)

FransBouma

Cin Ori

Thank you, I will try it

MegaWatt

In origins, no, sorry. The alternative you can do is to use a 9:16 aspect ratio using SRWE (https://github.com/dtgDTGdtg/SRWE), setting up the shot like you want it, and then 'hotsample' to a high resolution variant of 9:16 and then take the shot.

FransBouma

Hi, regarding AC Origins, is there a way to show on screen how much degrees you are rotating while using camera tilt? I usually rotate by 90 degrees to take vertical shots, I love that option to rotate by 90 degrees pressing ALT+NUMPAD1 like in most recent camera tools, however this one seems a little older and just changes the tilt speed using the same key combination

MegaWatt

February 1st

FransBouma

Do you know if/when it will be available for tier 1?

ScreaminSeahawk

Yes, it works! Thanks for the help!

Juno Wolf Kissed

yes you have to copy the folders as well (as-is so just copy everything in the zip into the game folder where the .exe is). the Shaders folder contains the replacement shaders that actually hide the hud :)

FransBouma

No, i have steam one too. I just put nvapi.dll, d3dx.ini,d3dcompiler_46.dll and d3d11.dll to the game folder. Should i put rest of folders "Shaders" too?

Juno Wolf Kissed

It still seems to work fine on the steam version, you're using the EGS version?

FransBouma

Hello! I have a question about Tomb Raider 2013. You created a the menu/hud toggle back then but it sadly doesn't work with latest update, is it possible to make it work? And thanks for your tools!

Juno Wolf Kissed

yep, will be available next week (tier 2)

FransBouma

hey-hey! gonna make camera for god of war? :)

Костик Смит

If you have the EGS version of tombraider, it isn't supported. It works with the steam version (at least it does here)

FransBouma

Hello first of all thank you for the work you have done so far.I have a question about the file Menu / HUD Overlay toggle for tomb raider 2013.does it still work for the last update? because when I copy the files to the game directory, it does not work anymore.

Eliza_Cassan

Also, I’m not sure if it’s possible, but I think that a photo mode for Naruto storm 4 would be pretty cool. Do you think you could look into it? Again, I’m not sure if it’s possible due to the way the game is made but If it is, I would love to get some shots.

Bahaha Badd

Aw, I’m bummed out it doesn’t work. Thank you for taking the time to respond, I appreciate it. Hopefully it get’s fixed soon, I’d love to try it out. Have a great day.

Bahaha Badd

Updated RE3 tools. not really any changes other than removal of the Anti cheat bypass as that's no longer necessary (so the client won't give any error anymore).

FransBouma

You're correct, camera is broken. Game is incompatible. I'll pull the camera and put it on the list of broken cameras.

FransBouma

I have the old version and it’s on uplay, I even tried running it as administrator and it still doesn’t work for me

Bahaha Badd

AC 3 camera is for the old AC3, not the remaster. It only works for the uplay version, and you have to run the injector as administrator.

FransBouma

Every time I inject the AC3 camera into the game it claims that it's successfully connected but when I try to access the camera, it doesn't do anything. I also don't get the notifications that are supposed to pop up on the upper left side of the screen. Any Solution?

Bahaha Badd

Darksiders II: Deathinitive Edition added

FransBouma

No, that's a result of the game still running on dx12. Try to inject the camera as late as possible, i.e. when you've loaded a level/savegame

FransBouma

Hello! When I use launch IGCSInjector.exe (RE2), it says in console "Failed to create directX device and swapchain!" and HUD doesn't show in game screen. I am running in administrator mode both game and tool. Ingame graphic setting is DirectX11, and DirectX is all updated in windows update. It's because of RE2 update or something else?

xyz114

Is this a temporary dilemma or would a version rollback allow these tools to be usable again? I only just got gifted this game a few days ago and would be keen to give these camera tools a go if possible

YTJGabriel04

Hmm, bummer. I do remember it was for the 666 build, but not sure if they changed anything. Will remove it again.

FransBouma

DOOM 64 log " wait for camera instructions" unfortunately it doesn't work

Cosmic71

hotsampling works if you run the game in windowed mode

FransBouma

This is ICARUS https://store.steampowered.com/app/1149460/ICARUS/ Doom I have to install it (within today I will) and I will be able to tell you if the photo cameras work. I don't generally use lights so I can't give you feedback on this. Instead a question about hot sampling. I can't use it. Maybe if you want and time you could make a video and upload it to you tube!

Cosmic71

I'll add Chorus, thanks (I haven't heard from someone yet if it worked, hence you're the first :) ). Which Icarus game do you mean? Do lights work too? TIA I think DOOM was missing in the list of games I made cameras for :) But it's an old one, it might very well be totally broken, haven't heard anyone in a while if it works still.

FransBouma

ahahahah I remembered well then! I had to format the pc two days ago but I forgot to make a bk of your folder where I had downloaded all the various photo mode realeas and I also remembered DOOM! well now that you're at it, check it out well maybe you forgot to upload other games lol! AH the list of games that have the camera unlocked with your UUU is out of date. If you want I can help you (add CHORUS and ICARUS for example)

Cosmic71

LOL I completely forgot to add the DOOM 2016 camera I made to the list! (Added it) I haven't tested it in ages tho, so it might very well not work. Doom ethernal: no, I haven't made a camera for that

FransBouma

Frans ciao I remember that you also created something for doom and doom eternal or am I wrong?

Cosmic71

Injustice 2 got updated a few weeks ago and the camera broke, their anti cheat now catches it. I removed the camera. I forgot to add it to the list of 'broken cameras' at the bottom.

FransBouma

Hi Frans i don't find the Injustice 2 v1.0 Camera tools... (Current supported game version: v1.0+ Camera version: 1.0.1)

Cosmic71

Thank you so much!

Juno Wolf Kissed

I had an hour so I've updated the Tomb Raider 2013 camera. (v1.0.3) :)

FransBouma

I'll look into it, but not today.

FransBouma

Hello, Otis_Inf! Tomb Raider 2013 had a small update today, and your camera tools doesn't work anymore. Is it possible to fix it maybe? Thanks in advance.

Juno Wolf Kissed

no, sorry

FransBouma

Will you be making camera tools for Deathloop?

anya

Thank you!

Fameless

It'll be released tomorrow. I've fixed the UUU for it, it's going through final testing (I don't have the game so I am relying on the person who tests it for me who does have the game :)).

FransBouma

Can you please Update The Dark Pictures Anthology Little hope? It's to hard to downgrade the Game via Steam!

Fameless

Oh! Thank you. The problem has been solved. Is the "insert" key conflicts. When I start the camera tool, I turn off the Reshade.

Ouetcn

I have honestly no idea. Did you by any chance bind 'insert' to disable reshade effects? Or to the effect you have active? If you enable the effects again in the reshade overlay, do they work? My code doesn't affect reshade so it's something related to reshade itself or your reshade settings.

FransBouma

Yes, I installed ReShade in the folder where the game exe is. After starting the camera tool, there was no error, but the ReShade lose efficacy. I want to know how to keep the Reshade effect after using the camera tool？

Ouetcn

When I press 'Insert' to start camera mode, my ReShade lose efficacy and the game image is restored to its original quality.

Ouetcn

what does 'failed' mean? Is there any error reported? You did install any shaders too? You installed reshade in the folder where the game exe is? (as that's important). Other than that, I don't know...

FransBouma

Hello! I installed a ReShade for Death Strandings, but the ReShade failed after using camera tools, is there any solution ?

Ouetcn

Apparently I'm not eligible for that outfit :D I have an Nvidia RTX card, I am logged in to geforce experience and under 'redeem' I don't see the free outfit where it should be. Apparently my geforce account isn't nvidia enough... So I can't obtain teh outfit and I don't know why that has any influence to be honest. Does the log tab report any error? If so, could you post the .log file that's generated in the tools folder? Can be done in a DM or pastebin or something, as you can't attach files here

FransBouma

it's a redeemable outfit from geforce experience. anyone with nvidia vga can redeem that outfit

abdlsnfr

That's a mod or something, I don't have that outfit, is it in-game? If it's a mod, it's out of my hands. If it's an in-game outfit, then I also don't know, I'm sorry. Try using F11 to pause the game using the photomode and then enable the camera

FransBouma

There seems to be an issue with the camera tools & Sleek Starlord outfit installed on Epic Game version. When the sleek starlord installed, i can't pause the game using the camera tools. after i removed the sleek outfit and reverifying the game, both camera tools & reshade works just fine

abdlsnfr

Awesome. Sir.

abdlsnfr

They'll be out hopefully before/this weekend

FransBouma

will you make camera mod for Guardians of The Galaxy?

abdlsnfr

SOTTR tools updated for the DLSS patch released on October 18th. Not sure you want to play that tho, but in any case...

FransBouma

https://www.patreon.com/posts/55048344 :)

FransBouma

Do you have Days Gone photography tools? Thank you

Sam Bridges

You can't use the camera in online games I think, plus the game does have an anti-cheat which I try to disable but this might not work. I did experience crashes too occasionally when I built it some time ago. it's not a 100% fail safe solution, but it's what could be done within the frame of the anti-cheat disabling and being able to debug things.

FransBouma

Injustice 2: Legendary Edition (Steam) When I click on INS to disable the camera the game closes.

Leo

The DH camera is using the Ansel system and it doesn't offer a pause/unpause feature. So you can't unpause it

FransBouma

idk if its a dumb question but for Dishonored 2 cam, is it possible to unfreeze it? like i mean when you enable the camera everything stops moving and i don't want that? sorry if its confusing

anya

Thank you for the amazing TR tools~

Jonathan

mafia 3 and mafia 3 de are different games and have different tools. If I do recall correctly the cutscenes were pre-rendered.

FransBouma

what's the exact error you're getting?

FransBouma

Is the tool for Mafia 3 (the normal one and Definitive Edition) supposed to work in cutscenes? Because it doesn't in my PC

Pierfrancesco Olianas

The titanfall 2 cam mod is not working, is saying that is not compatible with the game version, however mine its in origin. How can i fix it?

Vitor de Carvalho

The camera for Mafia 3 (not the definitive edition one) works in Mafia 1 Definitive Edition.

FransBouma

Please, release CameraTool for Games: Dishonored 1 Far Cry 4 Far Cry 5 Mafia 1 Remastered (aka Mafia: Definitive Edition) Fallout 4 Witcher 3 TESV Skyrim

Максим Максимов

Alright :) It's ok to have defender running tho. Next time you download one of my cameras, after unpacking the zip, right click the exe in windows explorer and select 'Properties' and at the General tab there's a checkbox at the bottom, most likely, which says 'Unblock'. Check that and it's ok. Windows by default marks all .exe files downloaded from the internet as 'dangerous'.

FransBouma

Just want to update this....After a few weeks of testing it was most likely defender causing the tool to close, or some app protection setting -- I had them all turned on which I normally don't. I reformatted and installed a few SSD's late last year so I'm guessing I did not disable the stuff I didn't want constantly running. Haven't had a single issue in a few weeks since doing this.

Gaming Ambience

Thanks, Frans!

abdlsnfr

It's the UUU, v3 is free: https://framedsc.github.io/GeneralGuides/universal_ue4_consoleunlocker.htm. V4 with camera paths will release soon (here, so not free :) )

FransBouma

Hello! I came here via a post on twitter saying that you had a Camera mod for The Ascent? Am I missing it?

The Explorographer

Heh well, whatever works :D

FransBouma

Weirdly enough it seems to be more stable while running mods/trainers. Didn't have a single issue last night. Oh well lol. The previous two days before last night I did not run any mods/trainers.

Gaming Ambience

That sounds weird indeed, maybe another mod conflicting? If it's not a direct crash it's often hard to find what might cause it, also because it appears to be working normally for longer periods of time. So it's not as if it overwrites the wrong pieces of code in the exe as that would either always crash or never crash.

FransBouma

Hey Frans. I know Mankind Divided is one of your older tools but lately it's been constantly crashing my game, or just randomly closing it without an error, sometimes every 10 minutes after activating the tool. I had 1 day where it was fine, but the last two days I can't even have it running for 10 minutes without an issue. I figured it's the tool because I ran the game without it and I had no issue. It worked pretty flawlessly last year and early this year, some minor issues with my game closing but nothing like it is now. Strange.

Gaming Ambience

Updated WD Legion tools to v1.0.6 to make it work with WD Legion patch 1.5.0

FransBouma

Fixed, use WD Legion tools v1.0.6

FransBouma

I can't reproduce that particular problem, but it's indeed broken: CA removal and hud toggle seem to be broken as well as photomode range removal. Camera rotates fine but without hud removal it's a bit pointless. Will try to fix it. Stay tuned.

FransBouma

regarding WD Legion cam tool, there's something different with the camera rotation, it seems the rotate point locked on the side of frame rather than central area.

abdlsnfr

It has been reported to be broken, but some say it works fine. I'd chalk it up as broken. I'll adjust the post I thought I had mentioned it here too, but only on the main page.

FransBouma

Is the first Watch Dogs photomode still working? i must have done something wrong cause everytime i press Insert the camera notification doesn't show

abdlsnfr

Hi, the tool worked for me 100 %, Thank you!

SparCkL

It might work, but likely not (The MS Store version is wrapped in an UWP layer I think). You could try, I only have the game on Steam.

FransBouma

Hi, I'm new here. I want to install the mod for Gears 5. I got the game from the Microsoft store, can I use the mod or do I need to have the game on steam?

SparCkL

Then run it as normal. It should work fine. If it doesn't, or windows tells it's unsafe, right click the exe in windows explorer -> properties -> General tab, check the Unblock checkbox at the bottom.

FransBouma

it seems i don't have run as Administrator what should i do? i have lost that option

Michael Murray

How about starting with reading what I wrote above and reading the readme.txt that's in the zip too? From the readme: How to use =========== Run the game as Administrator. This is very important. Then start IGCSInjector.exe. It will show a dialog that things are injected fine, or if an error occurred, it will tell you that too. You should get a notification in the top left corner of the game window. Open the in-game main window with settings, help and console using Ctrl-Ins. Start the injector slightly later than the game so hooking into the XInput (for controller blocking) is picked up.

FransBouma

dll in the zip into the game process? How? Never done this before.

Michael Murray

I'll do whenever I get home

Michael Murray

yes, you need to extract the zip, hence me saying: 'unpack the zip in a folder'. The exe needs to inject the dll in the zip into the game process. Please read the readme enclosed

FransBouma

Did you need me to extract it?

Michael Murray

Unpack the zip file in a folder. Start the game, wait till the menu is up, then start the injector exe, it should inject the dll into the game. You should see an overlay pop up in the top left corner. Ctrl-insert opens the overlay menu. Insert enables the camera. The keybindings are in the readme.txt

FransBouma

i don't know how to use this free camera mod for resident evil 2 remake, please help me out?

Michael Murray

I use this and it works beautifully. https://www.nexusmods.com/witcher3/mods/3574

Lukas Mundo

You can get close with a couple of mods :) See the framed guide: https://framedsc.github.io/GameGuides/thewitcher3.htm

FransBouma

Yes please, I would love this also!

Nicole Borchers

Nope, sorry. That game is very old and the time it takes to build one isn't worth it. I'm sorry

FransBouma

can we please get a fly camera mod for resident evil 6? if its a custom request id pay whatever yo uwant

seter

Wow, totally missed the configuration tab, amazing!

Matteo Scapin

it doesn't have keyboard input for that, you have to use the sliders on the configuration tab to control the dof. Alternatively use Reshade (4.9.1)

FransBouma

Hi Frans, amazing work so far! In the readme of the tool for Detroit: Become Human you mentioned the ability to adjust the depth of field by changing the focus distance, but I cannot find the right keyboard input. How do you do it? Thanks!

Matteo Scapin

Oh okay thanks. :)

Dylan

as the readme says, you should choose dx11. it doesn't work with dx12, which is the default for RE2. So in the options first select dx11, then you can inject the tools. The re2 tools use an overlay in-game that relies on dx11 so if you use dx12 (the game's default) it won't work and you get that error.

FransBouma

Dylan

I hope you will make photo mode for The Witcher 3: Wild hunt, please :)

Goldy_3D

I was busy with it, but decided not to do it, I worked too many hours last month so had to take a bit of a break. BUT, I've made a small cheat table to at least make the photomode a bit more bearable: https://raw.githubusercontent.com/FransBouma/InjectableGenericCameraSystem/master/MiscCheatTables/MassEffectLE.CT Select all text, copy it, paste it in notepad and save it as masseffectle.ct and then load it into cheat engine to have no range limit and no clip (but disable this when in gameplay!)

FransBouma

Please, make tools for Mass Effect Legendary Edition, the photomode in game is really not it :'D

anya

Ok thanks! I will try it!

ヒナ姉推し

and in the full game? Should work in the full game. Moving the camera with the controller works?

FransBouma

The camera movement of the Resident Evil 3 demo does not work..... Number keys are not responding......

ヒナ姉推し

Metro Exodus tools updated for Enhanced Edition. It's not ideal, read the readme.

FransBouma

Yeah, Strange that it Works but not the Newest Version. Im happy with it. Thanks Otis :)

Nico

The old cyberlit's AOB to find the engine object is outdated so I don't know how 1.0.5 still works for you on 1.22, but alas... Here 1.010 works fine, I don't know what causes crashes on your end.

FransBouma

Looks like the "Str8up Menu" Broke Something. Works Fine now after i deleted it. With the 1.0.5 Version i dont have any Issues anymore. The current Tools Version 1.0.10 still Instant Crashes my Game. Playing on the Current CP Version 1.22 of course.

Nico

interesting that the old version still works on your game version as 1.22 broke cyberlit, so also the old version. Please use the official latest release of CP as well as updated mods for that version, thanks

FransBouma

Yes im running it in Window mode. The thing it is Work Sometimes and than Suddenly not. Im using your old Version 1.0.5 cause the new with CyberLit in it instant Crashes my Game when using HotSampling and idk why.

Nico

You have to run the game as windowed. Fake fullscreen will remove the borders for you. The game won't resize if it's not windowed. Also, make sure you use the latest game version (1.22) and tools (1.0.10)

FransBouma

Im already using Reshade for some Fine Tuning still Like Ansel overall. But the Issue is that when i go through my Steps. Game Window Mode > Pre Edit Everything > Use "Window Borders" and "Fake Fullscreen" on my Game which runs in QHD > Hotsampling up to 4k > It Switches the Window Size to the 4k Resoultion Window Size but it dont Switches the Game Resolution. It Looks like it should be but the Game Resolution than Adjust itself to the Window Size but still with the 2560x1440 Resolution in a 3840x2160 Window.

Nico

The window movement is something that's done by the game, it puts it on a random spot. I do place it at (0,0) but the game moves it. You can re-align it again using the buttons on the hotsampling tab, but with ansel effects that's likely not going to help. I'd ditch that anyway and use Reshade: more effects, and doesn't have a problem (https://reshade.me) what I always do is first setup the shot in normal resolution, including effects, then hotsample to a large resolution and take the shot (no editing anymore) and then go back to the play resolution

FransBouma

Hey Otis, lately im Struggeling with the Hotsampling in Cyberpunk sometimes it just wont Work. It Increases the Window but also moves the IG Camera in different Ways + the Window Location. This makes it unable to use Ansel. Do you know what the Problem could be? Playing the GOG Version.

Nico

This is likely due to denuvo. the thing is that denuvo decrypts part of the exe in memory which is then ran, so if you inject too early, the code isn't there in memory (even though it is part of the exe!). So the camera tools can't find it. Once the menu is up and the scary dude is looking at you, you can inject the tools as the code needed to intercept is decrypted by denuvo and running and the tools can find it :)

FransBouma

Okay... and to make matters weirder, it started working after I left it alone for a minute.

Jesus Gomez

From the log tab: "All hooks enabled. Camera dll::>>>>>> ERROR <<<<<< Can't find pattern for block 'AOB_ANTI_CHEAT_INTERCEPT'! Hook not set. Camera dll::>>>>>> ERROR <<<<<< One or more interception offsets weren't found: tools aren't compatible with this game's version. Anti-cheat disabled Waiting for camera struct interception... Camera found."

Jesus Gomez

I'll see what's wrong, tho what error do you get in the log tab of the client? Could you try injecting the dll after you've loaded a level? Thanks

FransBouma

I am getting message that the camera for RE3 is not compatible with the current version of the game. I'm on camera v. 104 and the most current version of RE3 on Steam.

Jesus Gomez

I'll see what's needed. If their photomode is the best that's ever been created, it's not worth the trouble, but chances are it's not, so I'll see what I can do :)

FransBouma

idk if it's ok to ask this here, but will you be making a camera tool for Mass Effect Trilogy remaster? since they adding photomode in there :D

anya

DMC5 tools not always work atm, they're in the process of being fixed later this month. They can work at times, but sometimes fail. The resolution scale intercept isn't that important, so it's likely something else fails too (as they're not 100% compatible anymore).

FransBouma

Tried it with DMC5 and my game just pauses as soon as I open the injector. It says 'can't find pattern for block 'AOB_RESOLUTION_SCALE_INTERCEPT! hook not set' and 'tools aren't compatible with this game'

Sean Hollyman

The Vignette is removed automatically after you've injected the camera. It's disabled at the start and stays disabled, so you don't have to do anything. (as it also removes the lens fringe they have implemented)

FransBouma

And how do I get the "Vignette removal" in RE3 ? Is it automatically applied when the camera is on?

Acrocanthosaurus

It's been removed from the list for a few days now as it was broken since a long time. It was on the list but with a 'broken' remark but some people missed that apparently so I removed it entirely. It's unclear when / if it'll be fixed as they changed their whole internal structure of the game (from exe to dll) which has the consequence the camera has to be done from scratch.

FransBouma

so, Prey is officially removed from this list? Just bought the game and disappointed to find out.

Acrocanthosaurus

You mean you drive the car and you want to enable the camera? Hmm. The thing is that I do intercept what's currently 'the camera' but it can fluctuate a bit as they use a truckload of different cameras and sometimes it works and sometimes it doesn't... (same thing is that when you start the game, you're on a bike, then enable the photomode and my camera can't change the fov... ). If you try the following (it might sound weird, but the engine is a mess): start the game, load a level, when walking enable the photomode, and try my camera / fov, see if that works alright, then drive a car and see if it works... (currently not able to test hence I ask this :) )

FransBouma

Brilliant mod, and works perfectly in Cyberpunk 2077... but I can't use it while driving. I'm guessing there's a good reason for this, but are there plans to enable it in the future? I wanted to create a short film in-game, but not being able to do so while driving is a real bummer.

Benjamin Anderson

Thanks!

xieyuyn888

In normal gameplay the head isn't visible so it won't be brought back when you pause and enable the camera. When you enable the photomode it is usually brought back (except in cutscenes). In photomode you can enable the camera and move it more easily than the vanilla photomode camera which is terrible. An alternative is to use the Appearance Menu Mod from Nexus which allows you to spawn your V with head (but you can't control it of course)

FransBouma

Hi, I don't see the character's head displayed on Cyberpunk2077, the latest version is 103? Thanks in advance

Salem

No idea, might be you injected the camera too early? Try to inject the camera when the level has been loaded. Denuvo decrypts part of the exe during menu load so it might not always be picked up.

FransBouma

same,can move keyboard,but mouse

iccc_ee

You need a 3rd party tool to remove the anti cheat which doesn't allow you to do any online game after that. Lan might work but never tried.

FransBouma

you run the game as admin and the injector not as admin?

FransBouma

Assassin's Creed Odyssey issue : Failed to create directX device and swapchain!

iccc_ee

If the gears 5 tool also works on offline or LAN pvp mode？

Hen Li

It's Unreal Engine 4, but uses a custom camera, so my UUU does work but you need the debug camera (using toggledebugcamera console command) https://framedsc.github.io/GeneralGuides/universal_ue4_consoleunlocker.htm

FransBouma

Do you have a plan on Little Nightmares2？

xieyuyn888

Works fine here, so it might be you haven't set up reshade properly. Check this guide to properly setup reshade: https://framedsc.github.io/ReshadeGuides/setupreshade.htm#checking-depth-buffer-access You have to have 'reversed' set to 1 and logarithmic set to 0. And the cinematic dof guide: https://framedsc.github.io/ReshadeGuides/Shaders/cinematicdof.htm What exactly seems to be wrong in your case?

FransBouma

Yeah that's HattiWatti, he quit some time ago as he started working for EA DICE. :)

FransBouma

Cinematic Dof does not seem to work well with AC Valhalla, Im not sure why but I cant seem to use it in the same way I do other games.

Megla Don

shame, that game was so beautiful.I have downloaded a camera tool--TheHunterCoTW, which is injection based on the same principle as yours.did you make it?or there is another colleague?Because I downloaded 15 camera tools that you don't have here.(like AlienIsolation/DAI/DSIII/FC5/JC3/MEA/ME/QB etc.)

iccc_ee

UWP (the system it's made with) makes it hard to inject things/debug with cheat engine to make the tools. Also, I think the pm is pretty decent? (I don't have the game tho)

FransBouma

so why dont you make a tool for Microsoft Flight Simulator 2020?

iccc_ee

ok. :) Keybindings weren't configurable in that version of my system, sadly... So you have to make do with the ones that are hard-coded.

FransBouma

sorry,my misdake,it worked again,btw,how to change the key-bindings?

iccc_ee

:) Yeah I get that but do you get an error? When you press Ctrl-Ins and look at the console tab, do you see errors there? If so, which ones? Could you click the copy button to copy the contents? I didn't expect this game to update tho, everyone involved has moved on a long time ago...

FransBouma

I mean the tool doesn't support the latest version of the game

iccc_ee

what does 'doesn't work' mean? what errors do you get?

FransBouma

dyinglight v1.38,the tools doesnt work.

iccc_ee

WD Legion and AC Valhalla tools updated.

FransBouma

Fixed

FransBouma

Reproduced. Weird, it worked when I released it. Will see what's up...

FransBouma

WD Legion 1.04 cant change the time!

iccc_ee

In theory I could, but it's a lot of work so that'll be a no.

FransBouma

can u make the GUI tool to support old game?like WD2,Dyinglight etc.

iccc_ee

Death Stranding tools updated: added fov control when using the camera not through the photomode. I overlooked this with the last release Edit: If you downloaded 1.0.3, download 1.0.3b again, as ds 1.0.3 was the old dll... sorry!

FransBouma

No, not really. You can use the Hitman 2 cheat table which unlocks range in ansel, if that helps. After IOI's weekly build updates with hitman 1 I had enough of patching that camera every time so I don't create cameras for their games anymore, it's just too much trouble.

FransBouma

WD Legion tools updated to game version 1.3.0.

FransBouma

so, do u have a plan on hitman3?

iccc_ee

Thank you Frans ! Combined with another Detroit VP (in native language, it went smoother lol), I succeeded ! I didn't notice the "global options" button and starting from here, I put everything on 1, selected the depth buffer and then, deactivated the displaydepth. Now, it's running smoothly ! Thank you ! I'll try this on Tomb Raider 13 another time as well. Thanks !

Heda

CP2077 tools updated so they block input again (cp2077 game version 1.12)

FransBouma

It's been a while but if I recall correctly the depth buffer isn't available in Detroit: Become Human. However I could be wrong. To test: get the latest reshade (4.9.1) and in reshade's menu make sure you select the right depth buffer (vulkan tab) and also use DisplayDepth to check if the global environment variables of reshade (blue button at the top of the shader settings) are setup correctly, i.e. if the depth buffer isn't reversed or should be upside down etc.

FransBouma

Aloha ! It's her again. I'm returning to Detroit Become Human and I can't get the depth tools (adaptative fog/Cinematic DOF) to work properly... It's like the tool can't handle/find distances. The DOF is working through the cam tool, but not in ReShade. I've seen that issue in other games but not for Detroit, I found nothing. Sorry if you already got the question and answered but some explanations elude me lol. I did activated the Vulkan option installing ReShade and I did played with the Vulkan samples in ReShade thumbs but nothing changes. And I actually encounter the same issue with Tomb Raider 2013. I'm on a Shadow PC with a GeForce GTX GC. Is there something I forgot to do or am I missing something ? Thank you always for your tools and constant support <3

Heda

Thanks! Works like a charm now :D

J

No idea what went wrong! But I've reattached the file, should work now :)

FransBouma

Hi Frans, thanks for the update! When downloading the ACValhalla V1.08 there is no zip file and downloading it creates a file called "1". Any idea what could be the case? Thanks.

J

AC Valhalla tools updated with higher lods for distant mountains, models and some foliage/buildings, which weren't affected by the already built-in high lods selector.

FransBouma

I should have done a little video instead. Yea, so I clicked "create" and even try to toggle it, but nothing happens. Edit: Aaaaand it works :). I think it just wasn't dark enough. Thank for your patience!

Ron Arslan

You have to click 'Create' at the bottom to actually create the light with the settings you specified. After that the light will be created in the world and the dialog will disappear. You can re-open it when clicking 'Edit'.

FransBouma

See my other reply :)

FransBouma

I don't know if you were saying this for my issue, or just an update with another issue you were working on. I tried this d version, but I still get the same no-light problem: https://www.nexusmods.com/cyberpunk2077/images/6885

Ron Arslan

Updated CyberLit to v1.0.6d, it now has a better checker for finding the right entity to tie a light to so the game should crash less when you click 'create'.

FransBouma

I have followed the video on YouTube about your Cyberlit lighting mod. Everything is fine, until I get to actually adding the light and a light never appears. The whole screen is kind of whited out, but still transparent. I can change the menu buttons and options, but nothing happens on the screen. I am using Cyberlit version 1.0.6. and game/mods version 1.0.6. Any idea what I am doing wrong?

Ron Arslan

I just tried, latest version from steam, v1.0.2 tools version, works fine? When camera is enabled, fov works ok with controller, mouse and keyboard.

FransBouma

Hi, Death Stranding V.1.02 decrease increase FOV does not work neither by mouse nor numpad + - . Thank you.

GHOSTanbul

Oh wow, thanks!

Ron Arslan

See: https://framedsc.github.io/GameGuides/doometernal.htm

FransBouma

I take it that the DOOM CT version is for the 2016 game? Were you working on a CT for DOOM Eternal? I just got the game and it sucks to have to finish a level first, before you can use photomode, playing the same level over again.

Ron Arslan

HZD tools v1.0.12. Small fix for today's 1.0.10 game patch. Facepaints work again

FransBouma

Detroit Become Human uses Vulkan and the resize pipeline is very complex so I didn't find where the resolution was changed and therefore couldn't trigger it myself. The game itself doesn't react to game window resizing so there's little I could do. It's best to use DSR if you have an nvidia card.

FransBouma

Gamepass games in general don't allow any tools to be injected as their UWP wrapper encrypts everything. There are exceptions however, but in general that's the takeaway. So in general ignore gamepass games for these tools as they don't work.

FransBouma

Any reason why Hotsampling is not in the cameratools for Detroit: Become Human? By the way I love your work thanks so much.

Hi! Are these tools compatible with gamepass games? For example, Greedfall or Metro Exodus.

Pablo Basto Fernandez

AC Valhalla tools v1.0.7: small fix for AR correction which was broken in the AC Valhalla 1.1.1 patch they released last week.

FransBouma

Immortals Fenyx Rising tools v1.0.2: Fixed: Now works with game version 1.1.0+. Added: High LOD selector

FransBouma

DM me the URL of the video here on patreon, I'll have a look.

FransBouma

That did not work - I have taken a quick video but don't know how to send it to you.

Sarah Dean-Hughes

I will try it. Yeah sorry, I just don’t know how else to explain it other than that when I go back to the game after injecting it, the game screen is frozen. I can interact and move her around etc, I just cannot see what I am doing. It is just whatever screen I had up before I injected it, and that image is fixed.

Sarah Dean-Hughes

It still weird. I honestly have no idea how your screen looks like, so I have no idea what's wrong nor how to fix that. that's why I asked to describe what happens right after you inject the camera. In any case, I've rebuild the dll and have added the UI variant of the injector and have re-uploaded the tools to this post. Could you please download the 1.0.13a zip for Odyssey and try again one more time to see if that makes any difference? I'm afraid I'm out of options after this.

FransBouma

Sorry, I have been on night shifts - tried it in a window and the same occurs. I have reinstalled the game and redownloaded the camera mod - no joy. I used this camera all through Torment of Hades so am so disappointed not to be able to use it. It was great, so thank you for the short time I got to use it! :-)

Sarah Dean-Hughes

Oh, I clicked on something that uninstalled my DLC - so have to reinstall that first. I will let you know what happens after I have done all that. Thank you for now. :-)

Sarah Dean-Hughes

This all sounds so weird. Ok, in the game settings make sure you run as a small window, like 1600x900. No tools injected! When that's done, you at least know the game's in that one window. Then load a save so you see kassandra clearly. then inject the tools. What happens *after that* ? Does the game camera all of a sudden change?

FransBouma

Saying I cannot use my mouse is not accurate - if I click on it, I can hear her attack. I just cannot see it to use it to interact. I even tried the second injector on the title screen, but caused the same image freezing error. As I say, thank you for your help. I might just have to try a good old fashioned uninstall and reinstall. Of 70+ Gg. Agghh. Haha

Sarah Dean-Hughes

I bet it is all using the mouse isn't it? In which case, it will be pot luck that I hit the correct thing - got no chance! Well, thank you for trying! I am at my wits end for now, so will try again another day! Ahh, cannot use the mouse. Cannot even get it to go over to my second screen. Hmmm.

Sarah Dean-Hughes

No nothing. The game is freshly installed on a fresh computer! How do I scroll over to console - I keep accidentally exiting but obviously I cannot see what is going on. Is it trigger, toggle etc?

Sarah Dean-Hughes

This sounds totally weird :D Do you have reshade installed with some shader that copies the screen? As I otherwise don't understand what's going on. The screenshot you take is from the framebuffer that's on screen so that you see something else is ... weird to say the least!

FransBouma

Ahh! I was just writing the above as you replied - ok, I can try and work out how to get to it, but it is tricky because I can't see anything unless I take screenshots of what the image SHOULD look like!

Sarah Dean-Hughes

Funnily enough, when I do a screenshot of the game, it shows what it should look like if the screen was not frozen, and it shows your inejctable camera settings in the top corner. So it appears that they are showing up and then it doesn't fade away, but just stays there. Obviously I cannot see this myself, I had to do a screenshot, so can't work my way round any settings unless I guess.

Sarah Dean-Hughes

When you do ctrl-ins after injecting the tools, you should see an overlay on screen with the camera settings etc. there's also a Console tab (sorry I called it Log), it should show info regarding whether the tools ran into an error or not.

FransBouma

Sorry, I tried to do ctrl-ins, but do not know where to find the log?

Sarah Dean-Hughes

Then the dll isn't blocked by windows so that's not it. I honestly don't know. I presume you use the 1.0.13 camera but other than that I don't know other things to test. Still sounds like the camera is either not working correctly (but I tested it a month ago or so and it worked fine) or something else is causing problems, but I don't know what. If the log tab in the overlay shows no errors then I don't know what might cause this... :( Sorry.

FransBouma

Well it does not give the option to unblock - it is not greyed out or anything, just not there. Just attributes read only and hidden (both unchecked)

Sarah Dean-Hughes

You did unblock the dll too? If you, after injecting, press ctrl-ins, do you see the overlay? If so, what does the Log tab on the overlay say?

FransBouma

I had already tried it as not as Admin. i only changed it all to Admin once I had no other options, including changing th display to Borderless. Nothing. Really annoyed because it worked on my previous PC just fine. No idea what could be different. :-(

Sarah Dean-Hughes

Try running it *not* as admin (if you don't run the game as admin, it might not be necessary). The dll also might need unblocking with WIndows explorer properties -> general tab. That the injector says it all went well is just that the injection all went ok, but what happened with the tools after that it doesn't know. Sorry for this inconvenience, it sucks to have to go through these shitty hoops of trial/error. :(

FransBouma

I have put all my applications to administror (I definitely had this set up like this before). i managed to unblock it the way you stated. Again, the injector is saying it has worked, right up until I open up the game window again and it still gets stuck on the screen/image that I exited on.

Sarah Dean-Hughes

You downloaded the camera zip, and unzipped it in a folder? If you right-click the igcsinjector.exe in windows explorer -> properties, do you see an 'unblock' checkbox at the bottom of the general tab? If so, check it. By default windows doesn't like files downloaded from the internet and blocks any exe. Alternatively, if you use this injector: https://github.com/FransBouma/InjectableGenericCameraSystem/releases/tag/IGCSInjectorUI_103 (download the IGCSInjectorUI_v103.zip file), do you still have the problem? Still odd tho.

FransBouma

I appreciate it is not your camera, as it orked fine before. But the programme keeps getting blocked and I try an override it, which it says it has done, but clearly it is not.

Sarah Dean-Hughes

I had my own built computer before, and due to many circumstances I won't go into, I had to ditch it and buy a new pre-built. This is the first time I am getting this problem with your camera. Every time I select the injector application, it asks me to extract all or run, every time, even after extracting already a hundred times. Then, I return to the game and it either does not work or I get stuck on a screen - usually the map screen, with no indication as to whether the camera injected or not as the image is fixed and I cannot get back into the game properly - only hear her shuffling aroun when I move!

Sarah Dean-Hughes

Hmm, sounds odd. You inject the camera after you've loaded a level, You see in the top left corner the overlay and 'camera found' etc. and when you press ctrl-ins you get the overlay of the camera? When you say 'she can still move' you mean the camera is in a fixed position? if you press INS it's gone? Did you perhaps by accident activate the camera? This happened just today and did it work before?

FransBouma

Hey, I am having problems with AC: Odyssey. When I inject the camera mod, when I go back into the game, it is stuck on the screen, albeit the map, or whatever I had up last. The game is not frozen, as she can still move and interact, but the image is frozen.

Sarah Dean-Hughes

No Problem. I am still able to make great Screenshots without your Tool, so it's not a big deal

Freystein

Not this version, no. A new camera has to be build if it's to be used with AMD cards. I realize this isn't mentioned in the list of cameras. My apologies.

FransBouma

Yes, i have a 5700XT. So basically, there is no chance i can't use the Tools with a AMD Card?

Freystein

The Dishonored tools make use of the Ansel API. You use an AMD card by any chance?. Also, they don't have an in-game overlay, but should pop up a dosbox with text and the help menu with the keys.

FransBouma

I wanted to use the Camera Tool for Dishonored 2, but for some reason it doesn't work. Steam and Dishonored 2 (i've tried it with both dishonored 2 and dishonored 2 x64.exe) runs with admin rights. The same applies to the Injector.exe, which promptly shows me that it has successfully injected. But ingame doesn't show up the notification in the upper left corner, nor can I interact with the tool, i.e. Free Camera and such doesn't work... I'm using the Steam Version and other Overlays are disabled as well, just in case

Freystein

yeah that's the resolution scaler, the rest should 'work' more or less (I'm told, don't have the game installed atm). Please let me know if other things crash

FransBouma

Then the update broke the game in some form. Currently no fix is available, sorry...

FransBouma

Hey hey I'm actually dealing with issues regarding DMC5s camera tool as well. Took a pick of the console error section in case you find it helpful. Just wanna make sure if I can do anything to fix this myself or would have to wait for a future update :) - https://imgur.com/mckELyP

Kaitlyn

Hi Otis, this time the Injector can open but is not working in the game cutscene, but it was working when i used the injector 1 year ago. Not sure how to fix.

illyasuiel

Switch to dx11 in the game settings first. The camera does work with the updated exe but it's not 100% stable, the game might crash once in a while.

FransBouma

Hi Otis, I tried to use DMC5 camera after the game got Vergil DLC, it shows failed to get hooked swap sth. Can this being fixed/updated or am I doing anything wrong? Thanks!

illyasuiel

Nope that (cltrl-ins) just show normal camera tool menu..... doesn't show any errors..... weird though it should be fine .....dunno what's the problem.....

Hery Lewandowski

The console tab in the overlay (cltr-ins) doesn't show any errors either? very weird, someone else just this week used the same camera and it worked fine. I used the latest steam version to build it.

FransBouma

Its already running on dx11......nope when using your mod l didn't receive any errors

Hery Lewandowski

You did select dx11 in the game menu? The game defaults to dx12, you have to use dx11. Camera is made for the latest steam version. You didn't receive any errors?

FransBouma

HZD v1.0.11: patched for patch 1.0.8

FransBouma

Hello l'm using this mod for the first time....tried it first with dmcV using v102.....manage to inject dll file to game just fine...... But l can't really use this mod using its full function.....my problem is right now is 1- game pause / unpause function doesn't worked..... cutscenes continue running even when l pause it.... 2- l cant even move a camera at all.....all of it....only increase / decrease FOV ( numpad - /+ ) function worked.... Am l doing something wrong here ????

Hery Lewandowski

heh we've all been there :D

FransBouma

yeah, i checked it and the numpad key was deactivated, even tough i was sure it was activated *sigh*

Freystein

You have numlock switched off ? :) That's likely the cause. In any case, Hellblade can also be used with my UUU: https://framedsc.github.io/GeneralGuides/universal_ue4_consoleunlocker.htm Which besides a camera/timestop etc. also gives you hotsampling and the dev console. Which allows you to specify tweaks so the game looks better :) https://framedsc.github.io/GeneralGuides/ue4guide.htm#examples

FransBouma

Hey Otis, i'm playing currently Hellblade with the Camera Tool and there is a issue, where the Pause Toggle (Numpad 0) doesn't work anymore. Instead, the Numpad Key is strangely rebinded for some reason to the free Camera (which is also accessible via Insert Key). Which is just weird, since the Pause Feature did work in the early Parts of the Game, but unfortunately not anymore. I tried also overwrite the Injector Files with that from the downloaded Folder, but it didn't fixed anything Do you know any solution to this issue?

Freystein

I see. Well if you ever have time, I would happily use the camera during the cutscenes, even if it meant having the black bars. Thanks!

Dakota

They use a different camera for cutscenes in that game and although I could find it, at the time I couldn't find a way to get rid of the ridiculous black bars. (I might now, but haven't gone back to it). So it was rather moot to get that camera.

FransBouma

Quick question; Why doesn't the camera work for Kingdom Come Deliverance's cutscenes? Are they pre-rendered cutscenes? They always looked like they were rendered in-game to me. Thanks!

Dakota

Thank you for the quick reply. I'll keep these in mind.

PibuRa

1) no risk of getting banned if you use them with single player games (almost all my cameras are for single player. Only Titanfall 2 can be used in multiplayer) 2) same :) 3) Simply don't use them when in multiplayer/online. So RDR2 online: don't use them (won't work anyway) and titanfall 2, while some have used the tools for multiplayer, I wouldn't do it.

FransBouma

First of all, I wanna thank you for this amazing tools. I have been following you for sometime and I'm really impressed about your work. I have a few questions about using these tools, hope you will answer them when you are free. 1. Is it okay to be online while using these tools in a game? Is there a chance of getting banned if I'm online? I'm not asking about the online multiplayer games. 2. Above question for the cheat engine tables. 3. Same question for the games that have both story mode and online mode. For an example RDR 2 and Titanfall 2 have both story mode/campaign and online modes. Is it okay to use your tools & CE tables only for the story mode/campaign? And while doing so is it okay to be online or do I have to stay offline? I'm sorry for asking too much at once. But I need to know coz can't risk getting banned.

PibuRa

HZD tools now updated to v1.0.9: New: engine lod overrides to greatly enhance asset quality further away :)

FransBouma

You can edit your post I think, no need to post 3 in a row ;) I also made a tool called the Universal Unreal Engine Unlocker, or UUU, which offers freecam + console for 280+ games, among them SWJFO, so the separate camera was no longer needed. See: https://framedsc.github.io/GeneralGuides/universal_ue4_consoleunlocker.htm

FransBouma

will you pls do photo mode for Star Wars Jedi Fallen Order,I think I saw it on your github page a couple of months ago,if I remember correctly,I wonder what happened :( EDIT : yes it's fixed,sorry for spam,thank you for reply

john_smith

I had to update this to 1.0.2 as the dof disable I made was the wrong one, the one implemented now in 1.0.2 100% disables the dof when the camera is enabled :)

FransBouma

Batman Arkham Knight has been updated to v1.0.1: now with proper timestop, frameskip and dof disable, and of course camera, fov and hud toggle :) Build with the steam version, but I now use AOB scanning so it should also work with the Epic version (but not tested)

FransBouma

Just amazing work. Loving using these mods. I might even try in some older games again

Mefiul

As it's a Shadow PC, I'm not quite sure. Normally no, but I'll check the components and try it out. Yes, it's in the ZIP.

Heda

Hmm odd, worked fine here. You have an AMD card? As you need to use a different dll (i think it's in the zip) too

FransBouma

Yes 2013. And I took it from this link, yes. Sometimes, changing the build in Steam helps with tools. Like for Hatti's camera on ROTTR, you have to select another build. As TR 2013 has been patched since your tool, maybe they changed something, that's why I wanna check that. But the camera tool is fine, it's the hud toggle that crashes the game.

Heda

tr 2013? the camera tools for tomb raider 2013 I mean, the link is in the post above. I don't know what you mean with betas, I can't run betas for tomb raider

FransBouma

The hud toggle wouldn't let me launch the game because of the d3d11.dll file. I don't know what's a binary for patrons here but I meant try beta builds on Steam !

Heda

glad sottr works at least :) The TR 2013 tools worked fine last time I used them tho (1 year ago or so? ) You use the binary for patrons here? (1.0.1b)

FransBouma

After hours... and hours... and hours of testing, checking, changing machines and all, I finally succeeded. I don't know how, I don't remember when but Steam input was active, yet not active, very strange... I put it back to no settings, just default and now it works. Now. I gotta fix TR 2013 tools. Camera hacked is okay but timestop is awkward (as you mentioned in the readme file), it doesn't work on cutscene (black screen occurs or sounds crashing) and the hud toggle makes the game crash in D11 and wouldn't work when D9 forced. I gotta try with different beta builds if it changes anything. But right now... I'm back in business with SOTTR !!!!!!

Heda

Ok, I'll run some tests again and let you know if I can find a solution.

Heda

IT's very weird, the ROTTR tools code is based on the SOTTR tools code, with some backporting of newer things I added to newer tools later on, but that's about it (and different camera code of course, but the underlying controlling stuff is the same code). I have no idea what it can be, sorry. There are other oddities with the sottr tools, e.g. some people can't hotsample with it, others have no problems, it's very strange. Try not to run the game as admin (tools also not as admin) in case you do, I've heard that solved some problems for some people, but other than that, I have no idea what causes this, as I can't reproduce it so I can't check what might be wrong...

FransBouma

I spec both and tried each option. Changes work but the gamepad only controls the game, not the camera. And HZD tool works fine with the gamepad and same settings as well as Hellblade and Detroit. Even your ROTTR and TR 2013 tools are okay with the gamepad ! The issue is only with SOTTR tool. Keyboard works but it's very uncomfortable... That's why I wondered if it was only me.

Heda

the tools don't share anything so I don't think it's that. In Steam settings there's a controller tab, perhaps things aren't setup properly there? ALso, check the configuration tab in the tools client, you can define what device to use for controlling the camera. Perhaps you specified 'keyboard/mouse' there, so controller won't work

FransBouma

Yes, SOTTR. I bought a new Xbox One controller and play on a Shadow PC. PS4, Xbox 360 or Xbox One gamepad, same goes. I recall, back a few months ago, when I tried the tool, gamepad worked ok. Then, I installed ROTTR and from there, it stopped working. Tried uninstalling ROTTR just in case, but nothing. I tried on a local machine... Same. I think I broke it somehow......

Heda

SOTTR, not ROTTR, right? In the configuration tab, do you have selected controller ? Also, do you use a ps4 controller ? If so, do you use the ps4 controller through steam? If you use the ds tool for ps4 controllers before starting the game, it should work

FransBouma

Aloha, I just wanted to ask : every tool works perfectly fine but for SOTTR, I really don't know why, I can't use the gamepad to move the camera. I can with every other games, but not this one. I've also tried with the new link here instead of the old one I got and still, same problem. I wondered if it's normal or if I need to investigate. Am I the only one encountering this issue ? (yes, the "both" box is ticked and I tried changing that, in vain) Keyboard works fine. <3 Thank you !

Heda

Thanks!

FransBouma

I just wanted to say, thank you for making these. I subbed for the D:BH photomode, and it's a great tool, I'm having a lot of fun using it.

Neko

I've updated the Homefront: The Revolution camera tools: now with engine tweaks, time of day, built-in hud toggle, fov control in cutscenes, better timestop and fog control. It also enables the flycam in-game when enabling the camera which means you see yourself in full as 3rd person.

FransBouma

Sorry for the late reply, I had seen your post. The AC3 camera doesn't work for the remaster indeed, it's for the old game.

FransBouma

Could it be that the Camera Mod from Assassin's Creed 3 doesn't work with the Remastered? By the way, the game is installed in the Steam directory, although Uplay is mentioned in the ReadMe (actually there shouldn't be any differences, as the files should be identical ) In any case, I packed all files into the main directory of AC3 and started the injector. There it indicated to me that the "ac3sp" .exe was not found, but the exe from the remastered is specifically called "ACIII.exe. I changed the entry in the IGCSInjector.ini from "Process = AC3sp.exe" to "Process = ACIII.exe" and it assumed that in the injector, but absolutely nothing happens ingame when I want to control the camera . My guess is that the camera mod is not compatible with the remastered?

Freystein

Well, I'm glad there's at least some form of solution :) Although it required you to buy the game twice.

FransBouma

I have a report. I bought the American version of RE3 and launched the tool. It started normally. relieved. Apparently, this tool does not support Japanese version. I want to enjoy this tool. Thank you very much.

iu iuyt

Many thanks for the reply. After this, we will investigate and clarify.

iu iuyt

No that error message is unrelated. The XInput hook is only used to block controller input to the game when you enable the camera and have controller selected as the camera device. But as nothing works it seems (no keyboard input works for you), the camera is never enabled. I am very surprised numpad 0, del etc. doesn't do anything as well...

FransBouma

Camera dll :: >>>>>> Error <<<<<< Failed to hook XINPUT! After using the controller in-game, use the button on the General tab to re-enable the hook. Is this error message the cause? Or is it unrelated?

iu iuyt

Then I honestly don't know... I'm sorry.

FransBouma

Focus on the game window. Nothing happens when I press DEL. The hud menu has never appeared in the first place. Nothing happens when you press the numeric keypad 0. When you operate the mouse and WASD keys, the game is only operated.

iu iuyt

Hmm, i have no idea what causes this, to be honest. The game window has focus when you press Ins ? (so you're in the game, the windows focus isn't on e.g. the client exe ? ) If you press DEL the hud / menu disappears? And if you press Numpad 0 it pauses? Be sure to have the game focused (so mouse rotates game camera, WASD keys move menu entries)

FransBouma

I am very thankful for many replies I want to use this wonderful tool. If you change the ins key to another key, nothing will appear in the upper left. "Camera found" Nothing is displayed after that. The keyboard is made in Japan, but the layout is almost the same as that in the United States. Keys are written in the alphabet.

iu iuyt

I know you wrote some of that already, just wanted to have everything clear. So if you press Ins when the menu is up, you won't see a 'Camera enabled' in the top left corner? In the key mappings tab, Ins is set as the enable key? If you bind another key, like PageUp, or F3, will it then enable the camera? What I suspect is that your 'Ins' key isn't seen as 'Ins' by my camera dll (Ins being the key at the top left of the 6 keys above the cursor keys on a keyboard), as I think you're using a Kanji keyboard or one with us layout?

FransBouma

Camera dll::>>>>>> ERROR <<<<<< Hooking XINPUT failed! Try re-enabling the hook with the button on the General tab after you've used the controller in-game. All hooks enabled. All interception offsets found. Anti-cheat disabled Waiting for camera struct interception... Camera found. I pasted it as it is. "Camera found" is displayed on the upper left. However, pressing insert did not move the tool. As usual

iu iuyt

ok, so could you do the following? - start RE3, till the menu shows up, don't load a save - start the re3 tools exe - click Inject dll - you should see in the top left corner 'Camera found' among other things like anti tamper removed etc. - After camera has been found, go to the tools' dialog and go to the log tab. - copy all text there and paste it here please. - Also in the menu, if you press Ins, the camera should move to the side. - Also please confirm you're using 1.0.4 of the tools.

FransBouma

Yes, nothing happens. With a controller device, it doesn't change anything whether you use it as a keyboard or a gamepad. I run a game.

iu iuyt

oh sorry my bad, I was totally confusing re2 with re3, I forgot that in re3 I use my new system with a standalone exe / gui. Sorry about that Ok, in the configuration tab, you change the control device to mouse/kb and when you press Ins in-game nothing happens? you can't control the camera with numpad keys nor with the mouse?

FransBouma

No overlay is displayed. When the DLL is reflected, a small black window will appear in the upper left for about 1 second. The camera is shown as enabled. When I press Ctrl + Insert, nothing happens. Of course, the exe window will be displayed. When I change the game control device in the exe window, nothing happens. Changing the insert to another key does nothing. Only the characters in the game move.

iu iuyt

It should work, but I don't have access to the japanese version so I don't know for sure. If you set the camera device to 'mouse / keyboard' in the camera overlay (Ctrl-Ins), and after pressing Ins, can you move the camera with numpad 4/8/6/5 ? And rotate with the mouse?

FransBouma

I'm sorry I can't speak English. Is it possible that this camera tool, Japanese version re3 cannot be used?

iu iuyt

I'm sorry, but if that doesn't fix it, I don't know what causes it. I do know the controller input blocking for this game isn't always working because it can't always hook XInput (I have had this problem myself too, I could only fix it for myself after playing the game abit with the controller so the game has had loaded the xinput dll and then rehook it, but it then still didn't always work... :( ). The error message itself is harmless btw, you can still use the camera, input blocking isn't enabled if xinput isn't hooked (so enabling the camera when the game isn't paused, moving the camera with controller will make jill move as well, that's it).

FransBouma

After starting the game, I play, start the exe, and press the re-hook button. I also use the Xinput controller (not the xbox controller) But I get an error message. This is the latest steam re3 (Japan). The latest tool.

iu iuyt

That the XInput hook fails is in the readme: the game apparently doesn't load the xinput.dll at startup, so when the camera tools try to hook it, it's not loaded yet. You first have to use the controller in the game, like play a bit, open the menu etc, and then inject the camera or click the rehook xinput button. There's no other way to fix this. That you can't move the camera is odd, I can move the camera just fine. You're sure you're using v1.0.4 with the latest steam release? And controller (or 'both') is selected as camera device in the overlay menu?

FransBouma

Camera dll::>>>>>> ERROR <<<<<< Hooking XINPUT failed! Try re-enabling the hook with the button on the General tab after you've used the controller in-game. All hooks enabled. All interception offsets found. Anti-cheat disabled Waiting for camera struct interception... Camera found. Camera dll::>>>>>> ERROR <<<<<< Hooking XINPUT failed! Try re-enabling the hook with the button on the General tab after you've used the controller in-game. Hook to XInputGetState enabled An error message like this appears in the log and I cannot operate the camera at all. After moving the controller in the game, I can't do anything by pressing re-hook XINPUT. Do you know why?

iu iuyt

Resident Evil 3 tools have been fixed (v1.0.4)

FransBouma

Death Stranding is now available for tier 1!

FransBouma

It'll be fixed when I have time. It also might be it can't be fixed due to a change in how the anti tamper code works.

FransBouma

Please. I want you to fix RE3. I pay a lot of money.

iu iuyt

yes. I thought I fixed it but it apparently still crashes the game at places. It'll be fixed when I have time

FransBouma

RE 3 is still broken?

victor s

Not sure, haven't had time to look into it.

FransBouma

Hi, when will the update be available ? Thks a lots

jeremjol

Mafia 3 definitive edition is now available in tier 1. I totally forgot about moving that one.

FransBouma

Oh, alright. Thank you.

Kou

I thought I fixed it, but the person who tested it said it still crashed the game so I have made some mistake so I'll check that later (perhaps today, perhaps tomorrow)

FransBouma

I was just wondering, because first I went to check on github and it says over there that it has been fixed for Aug update (I am talking about RE3 by the way), but then I figured that the only option to get it - patreon, so that's why I am here. :-)

Kou

It'll be fixed in due time, as it's a tier 1 camera. Someone requested a fix and it'll be updated in the coming days, if I find the issue that's currently keeps crashing the game.

FransBouma

hello there. thanks for all the hard work. just one question if you don't mind. to get the updated version do I need to change the tier or how it works over here? sorry for bothering.

Kou

yes seems so. Will mark it as broken

FransBouma

Resident Evil 3 has been updated, I think the exe was also changed.

LOL GotYerTags