Cyrene nude&half nude&slider V1.1

V1.1新增安踏联动服装，界面衣服图标到7的时候就是 / V1.1 added a collaboration outfit with Anta, the outfit will appear when you toggle cloth icon in the menu to number 7.

V1.02修复了大招过程中头纱贴图出现的问题 / V1.02 fixed an issue with the veil texture appearing during the ult

V1.01修复了低画质下MOD不生效的问题 / V1.01 fixed the issue of MOD not working in low image quality

昔涟的MOD，按/可以打开界面，可以翻页（共有三页），注意所有操作都要按住Alt的情况下再用鼠标点击和拖拽，也可以用方向键进行操作。这次将崩坏三中爱莉希雅的五套衣服也做了进去，除了衣领衣服裙子袖子绑在一起，其他部位都是可以随意切换的，很多以前受限于技术感觉不完美的地方这次都进行了重新制作，还重新设计了UI，导致我每天十多个小时肝了好多天才肝出来，但因为模型差别和缺少调试时间，导致有些衣服可能穿模严重(滑块拉满穿的更厉害)，特别是头发，而且影响头环的位置，效果也不是很好看（还是原本的衣服最好看），所以不是很推荐用。因为按E后的头纱模型无法dump，因此没法修改它的UV，导致可能存在某些情况下突然出现一下的贴图错误。另外，由于衣服占模严重，加上模型重置，第三页的内容进行了大量减少，其中粉色框框框起来的部分是直接单次点击切换到对应差分的，而不是多次点击循环。
Cyrene's MOD. Press / to open the menu. All operations on the menu must be performed while holding down the alt key. You need to hold down the alt key and click to toggle, you can also use the arrow keys to operate. This time, I also included five outfits for Elysia from Honkai Impact 3rd. Except for the collar, cloth, skirt, and sleeves being tied together, the rest of the outfit can be freely toggled. But due to model differences and insufficient debugging time, some outfits may have severe clipping issues (even worse when the slider is fully extended), especially the hair, and it also affects the position of the head ring. Therefore, I don't highly recommend using other hair. Due to the large amount of clothing taking up space in the model, the content on the third page has been significantly reduced. The parts highlighted in pink are now toggled to the corresponding variations with a single click, instead of being looped through by multiple clicks.

具体包含切换如下所示：
The specific toggling is as follows:

说明：

1.如果要在启动的时候固定在某个MOD，请阅读readme.txt或是往期教程

2.如果想要拆分成单个差分，请参考往期说明

3.初次加载MOD的时候很可能出现模型坏掉的情况（具体表现为很多地方向中间收束），传送一下或是切换一下角色就正常了（每次新角色都有人问，以后再看到这种问题不再回答了），如果依旧有问题，检查下mods文件夹内是否有core文件夹，有的话删掉它（不少人有这个问题，不清楚是谁做的合集还是什么，有人下了过后mods文件夹带有了这个core文件夹，这个文件夹应该是和mods文件夹在同一个目录下的而不是在mods文件夹里面，XXMI会自带这个core文件夹，因此不需要移到外面覆盖，直接删掉就行了）。

4.有时候屏幕上会不间断出现瞬时的人物被拉成面条状的情况，这个也是3.2后出现的，似乎是3dm的bug，通常降低画质可以缓解，没其他办法解决

5.如果出现模型显示不完整的情况，要么是使用MOD管理器导致（在设置中关闭修复），要么是用的不是最新版XXMI

6.窗口模式是无法打开菜单的，如果遇到全屏依旧无法按/打开菜单的问题，请在ini中找到下面内容：

[KeyMenu]

condition = $active == 1

key = no_modifiers /

type = cycle

$menu = 0,1

修改key = 后面整段内容为你想要的快捷键

illustrate:

1. If you want it to remain a certain MOD everytime game starts, please read readme.txt or previous tutorials.

2. If you want to split it into individual variations, please refer to the instructions from my previously released MOD.

3. When you first load the MOD, the model may be broken (many places on the model converge to the middle), teleport or switch characters, and the MOD will display normally (Every time a new character's MOD is released, someone will ask this question. I will no longer answer this question when I see it in the future)

4. Sometimes the screen will continuously show the instantaneous characters being pulled into noodles. This also appeared after 3.2. It seems to be a bug of 3dm and cannot be solved (lowering the image quality may help). If you still have the problem, check if there is a "core" folder in the mods folder, if so, delete it

5. If the model is not fully displayed, it is either caused by using the MOD manager (turn off the repair in the settings) or not using the latest version of XXMI

6. The menu cannot be opened in window mode. If you encounter issues with pressing / opening the menu even in full screen, please find the following content in ini file:

[KeyMenu]

condition = $active == 1

key = no_modifiers /

type = cycle

$menu = 0,1

Change the entire section after "key = " to your desired shortcut key.

PS：用滑块后可能会有些地方存在不可抗力的穿模等问题，这个我也没法一一去测试，有问题可以截图发出来看看能不能修。

PPS：由于会第一时间过剧情，立绘MOD和其他什么问题等我过完剧情再说（