WAN 2.2 ULTRA VIDEO & IMAGE WORKFLOW!
Added 2025-08-04 21:39:01 +0000 UTCEDIT 07 AUGUST: I UPDATED THE WORKFLOW AND INSTALLERS TO ADD THE NEW IMAGE TO VIDEO 4 STEPS LORAs AS WELL AS THE NEWLY UPDATED TEXT TO VIDEO 1.1 4 STEPS LORAs.
THEY ARE FINALLY HERE AND YOU CAN USE THEM TO SPEED UP YOUR IMAGE TO VIDEO GEN IN ONLY 4 STEPS!
THE NEW 1.1 TEXT TO VIDEO LORAs ARE BETTER THAN THE 1.0 ESPECIALLY FOR TEXT TO IMAGE GENERATION BUT FOR TEXT TO VIDEO I STILL RECOMMEND NOT USING LORAs FOR THE FIRST HIGH NOISE MODEL (FIRST PINK LORA NODE). FOR BETTER MOVEMENT AND QUALITY!
YOU CAN WATCH THE SHORT UPDATE VIDEO HERE: https://youtu.be/aTGAiZe6SXU
EDIT 05 AUGUST: I UPDATED THE WORKFLOW TO REMOVE MAGCACHE SINCE SO MANY PEOPLE HAD ISSUES WITH IT SO IF YOU HAD THE ERROR:
KSamplerAdvanced 'NoneType' object has no attribute 'to' EITHER DISABLE MAGCACHE OR DOWNLOAD THIS NEW WORKFLOW. I WILL REUPDATE IT ONCE THE MAGCACHE NODES WILL SUPPORT WAN 2.2.
Hey everyone! I've just released a new video on the NEW WAN 2.2 MODELS! Simply the best Text to Video, Image to Video AND Text to image models ever released to date. Better motion, better style, better quality, just better in every single way! Capable of creating lifelike videos and images with incredible motion in only a few minutes. The age of movie creation at home as started, jump on the hype train right now while you still can!
There is just no competition for Wan right now....it wins on everything...
You can check out the video right here: https://youtu.be/L_fU_pP_MQU
I also created a 1-click installer for the Webui for my Patreon supporters for Local AND Runpod, that you can find right here: https://www.patreon.com/posts/135728905
Here the link to the manual install guide: https://pastebin.com/8jNxWZBm
Down below you will also find the WAN2_2-ULTRA_WORKFLOW.json for free for you to use!
As always, supporting me on Patreon allows me to keep creating helpful resources like this for the community. Thank you for your support - now go have some fun๐!
Comments
does not work at all
Phillip Gimmi
2025-10-19 20:05:44 +0000 UTCalso have "Some Nodes are Missing" - Fast Group Bypasser, Label (rgthree), FastLaplacianSharpen, FastFilmGrain.
Phillip Gimmi
2025-10-11 20:32:35 +0000 UTCtook 5 minutes to render 4 second clip at 1280x544. Using RTX 6000 ADA.
scifimovie2019
2025-10-11 20:27:47 +0000 UTCHey, I had the same issue and fixed it on RunPod by installing the missing nodes manually in Jupyter. Hereโs what I did: - Open JupyterLab (Port 8888 in RunPod). - Go to the Terminal. - Run these commands one by one to install the missing custom nodes: cd /ComfyUI/custom_nodes git clone https://github.com/city96/ComfyUI-GGUF.git git clone https://github.com/wallish77/wlsh_nodes.git git clone https://github.com/rgthree/rgthree-comfy.git git clone https://github.com/VRMonster/ComfyUI-Video-Enhancement-Nodes.git - Once installed, go back to ComfyUI, Update all and Restart it (use the restart button in the Manager tab). - Reload your WAN2.2 workflow, it should now open fine without the FastLaplacianSharpen or FastFilmGrain errors. If you still get FastLaplacianSharpen or FastFilmGrain errors: - Go to Custom Nodes Manager โ Search for โVideo Enhancement Nodesโ (by VRGameDevGirl). (That pack contains FastLaplacianSharpen and FastFilmGrain.) - Install it. -- Restart comfy and reload your WAN2.2 workflow, it should now open fine without the FastLaplacianSharpen or FastFilmGrain errors.
Baz
2025-09-29 02:29:44 +0000 UTCHey guys, can you help me please, when I drag and rop the workflow to comfyui in runpod, a error message appea "Some Nodes are Missing" - Fast Group Bypasser, Label (rgthree), FastLaplacianSharpen, FastFilmGrain. Then i close the pop up, and it doesnt work at all the tool
AiSon
2025-09-23 21:56:04 +0000 UTCThe videos with a single character lora turn out decent, but when I add more than one the results are not great. I'm unclear on what strength I should be setting the lighting lora, and the additional single lora at for the best results. I've googled and researched for hours, and tested it and it seems like the high noise for lightning needs to be at 3 and the low noise lightning at 1.5. Then when I add the single character lora keeping both low and high at 1 produce good results. When adding a 2nd charcter lora it throws everything off and I cant seem to find the sweet spot in that situation. If you could clarify what the ideal strength for each lora in the power lora loader that would be very helpful.
Dirk Diggler
2025-09-17 03:51:19 +0000 UTCchmod +x WAN2_2-ULTRA-AUTO_INSTALL-RUNPOD.sh ./WAN2_2-ULTRA-AUTO_INSTALL-RUNPOD.sh
Jeffrey
2025-09-13 16:43:21 +0000 UTCBTW, the commands to install stuff that you used in the video are not in the video description or this Patreon post. I had to type them manually. tail -f comfyui.log
Jeffrey
2025-09-13 16:43:08 +0000 UTCYeah, I've done everything right and every image I generate looks like absolute garbage. Weird ghosting, bad anatomy everywhere, blur, something is wrong and i cant figure it out. I'm about to go back to flux.
Adam Adair
2025-08-30 18:23:39 +0000 UTCI have a problem, everything works fine ,but the image looks latent noise, like there is no good image just noise, i dont use loras and my comfy is updated, and iam sure i used the correct two models , anyone had this?
Ech0_Hue
2025-08-30 11:25:44 +0000 UTCWhen I try to create a video from image I'm getting an error shape '[1, 16, 45, 2, 80, 2]' is invalid for input of size 4838400 2025-08-28T19:56:44.226416 - Prompt executed in 23.27 seconds ``` ## Attached Workflow Please make sure that workflow does not contain any sensitive information such as API keys or passwords. ``` Workflow too large. Please manually upload the workflow from local file system. ``` ## Additional Context (Please add any additional context or steps to reproduce the error here)
BadgerWi Johnson
2025-08-29 00:58:41 +0000 UTCI'm getting 5 of the custom nodes IMPORT FAILED, any fix??
Stevo T
2025-08-23 20:35:06 +0000 UTCif i always get "pause" does that mean i ran out of memory? 100%|โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ| 2/2 [00:58<00:00, 29.03s/it] gguf qtypes: F16 (694), Q4_K (356), Q5_K (44), F32 (1) model weight dtype torch.float16, manual cast: None model_type FLOW Requested to load WAN21 loaded partially 4762.706980926514 4760.3907470703125 0 Attempting to release mmap (264) (RES4LYF) rk_type: res_2s 100%|โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ| 2/2 [00:56<00:00, 28.50s/it] Requested to load WanVAE D:\ComfyUI_windows_portable>pause Press any key to continue . . .
daniel baychev
2025-08-23 15:31:00 +0000 UTCHi, when I use txt2Img I get image but with "wave". It's especially visible with hairs. The image is not clear (and not beautifull). I don't understand why I don't have the same image than you. I use the both wan2.2-T2V... and umt5-xxl-encoder-Q5_K_S and Wan_2.1_vae. As sampler I use Euler Beta. (I have a rtx4090). What I have missed ?
Axl9
2025-08-22 20:18:19 +0000 UTCI have same error. Maybe because ComfyUI update?
sirvz
2025-08-16 12:37:34 +0000 UTCthe above work flow ``` Loading aborted due to error reloading workflow data TypeError: (intermediate value).removeWidget is not a function ```
Josh inmn
2025-08-16 10:36:44 +0000 UTCbecause you are using the image to video model instead of the text to video
Aitrepreneur
2025-08-14 23:02:24 +0000 UTCWhenever i generate a image in wan 2.2 ultra, it just produces a white image. wan2.2-i2v-a14b-highnoise-q4_k_s,wan2.2-i2v-a14b-lownoise-q4_k_s , umt5-xxl-encoder-q5_k_s, wan_2.1_vae,wan2.2-lightning_t2v-v1.1-a14b-4teps-lora_high_fp16, wan2.2-lightning_t2v-v1.1-a14b-4teps-lora_low_fp16
Chayse Sterling
2025-08-14 03:09:35 +0000 UTCIt was removed ... EDIT 05 AUGUST: I UPDATED THE WORKFLOW TO REMOVE MAGCACHE SINCE SO MANY PEOPLE HAD ISSUES WITH IT SO IF YOU HAD THE ERROR.
toony
2025-08-14 01:55:34 +0000 UTCFor some reason in my wan 2.2 ultra workflow. under the wan 2.2 image generation, i dont have the magcache section at all. its just missing
Chayse Sterling
2025-08-13 08:01:46 +0000 UTCSo the BOSS walked me through a fix. The 1st Unet Loader needs the T2V High Noise as well as the 2nd Unet Loader needs the T2V Low Noise versions. He uploaded a new installer and .JSON workflow. I am very new to this and this got it working. The new installer does not have the MagCache.
Pizza
2025-08-05 23:49:46 +0000 UTCbecause you haven't updated comfyui, update it using the comfyui update bat file in the update folder
Aitrepreneur
2025-08-05 22:29:14 +0000 UTCFyI getting this error on the first and last frame. WanFirstLastFrameToVideo cannot access local variable 'clip_vision_output' where it is not associated with a value
Virtamouse
2025-08-05 22:24:53 +0000 UTC
