NokiMo
Aitrepreneur
Aitrepreneur

patreon


ALL-IN-ONE SD 3.5 Large WORKFLOW

Hey everyone! I've just released a new video on how to install the newest AI SD 3.5 model as well as my "ALL-IN-ONE SD 3.5 Large WORKFLOW" that is simplified and optimized for complete beginners and people coming from the automatic11111 webui that have never used comfyui before.

You can check out the video right here: https://youtu.be/S1URRHgYsA0

I also created a 1-click installer for the Webui for my Patreon supporters for Local AND Runpod, that you can find right here: https://www.patreon.com/posts/114563795


Here the link to the manual install guide: https://pastebin.com/aN4dEphH

Down below you will also find the ALL-IN-ONE SD 3.5 Large WORKFLOW for free for you to use.

As always, supporting me on Patreon allows me to keep creating helpful resources like this for the community. Thank you for your support - now go have some fun😉!

ALL-IN-ONE SD 3.5 Large WORKFLOW

Comments

@Todd, or is it Chad Karen boyfriend? Todd, I can say from a 3rd un bias set of eyes, that he is not being condescending, in fact he shows much more patience than I would with all super derp derps he gets from so many people. The internet, more specifically Reddit and the Reddit generation (which I assume you are of) is full of you giga Chads that would rather post and write comments and questions instead of google something for yourself, read something learn something or even get this, ask a damn LLM. Paste in your errors, try to talk to it a little better and I bet you get farther. Anyways, I'd say now I'm wasting my time but I'm am fully entertained. Werf iT

Josh inmn

Got it.. thanks I should RTFM :D

Z

use the offload to cpu option

Aitrepreneur

Hello, what HW requirements are to run image to video ? I have RTX 3080 with 16GB vram and 64GB ram and still getting OOM.. thx

Z

one could argue 1_click_"solution" is false advertisement... so maybe you should stop being condescending! and i pasted walls of errors so others may benefit which they won't with DM... but yeah - I am the problem here.... how about you reimburse my Tier to me? then I'm gone!

Todd

What posts? I dont see every single comment that's posted that's why I say that if you need help asap you should DM me instead. Also I'm not wasting time this is literally my job. You could have gotten help if you asked for it like I say in every one of my videos remember "send me a DM..." but instead you took the time to write ANOTHER comment that I might not have seen either, yeah....talk about wasting time and energy doing useless actions.

Aitrepreneur

Instead of condescending to your subscribers you should have read my previous posts and not waste time and energy on your comment.... (how does that feel?)

Todd

Instead of writing a useless comment you could have just asked for help since you are obviously a beginner and don't know what you are doing. Writing this comment is just a waste of your time and energy. What is the error you've had?

Aitrepreneur

so I spend my whole weekend trying every so called 1 click installer here on a fresh virgin original windows 10 with all updates and no firewall. (To have a clean Enviroment... ) None worked ootB. On this one - The Button to run the prompts is not there - reloading, new loading etc won't change that.... The Reason I went on Patreon (TTS) still is not working, even with all suggestions by the Creator. enjoy the 5 Bucks - I cancled.

Todd

Would that be true of the Flux models too or models that need 20-40vram? That they would run, just much slower? I could imagine that being useful to get higher quality images and just run the model longer to get better results?

Sam Shennan

It works, this error means that it can't find the Q8 version model and it's probably because you chose option 1 or 2 so it downloaded the Q4 or Q5 models, since the workflow by default chooses the Q8 all you need to do is click on the model name and chose the one that was downloaded

Aitrepreneur

For what it's worth, I vote for your doing more Flux stuff and perfecting the workflows you provided last month. I still can't get the GGUF Imaqe Generation workflow to work with the sample prompt that you had embedded within it...I did absolutely nothing else to it other than try running it. I get this error message: Prompt outputs failed validation UnetLoaderGGUF: - Value not in list: unet_name: 'flux1-dev-Q8_0.gguf' not in ['flux1-dev-Q4_K_S.gguf'] DualCLIPLoaderGGUF: - Value not in list: clip_name2: 't5-v1_1-xxl-encoder-Q8_0.gguf' not in ['ViT-L-14-TEXT-detail-improved-hiT-GmP-TE-only-HF.safetensors', 't5-v1_1-xxl-encoder-Q3_K_L.gguf', 't5xxl_fp16.safetensors', 't5xxl_fp8_e4m3fn.safetensors'] Here's hoping your updated ones work.

Ken L. Black

I reinstalled the whole thing overnight with the oneclick install. did all the usual missing nodes, reboots and stuff. Success! Then I just brought in all the models from my FLux into the new comfyUI and it works

Sam Shennan

I'm running it fine on a 3070TI with 8 GB VRAM and 32 GB system RAM.

Nibmeister

Weird, but yesterday, the nodes were missing, today, the nodes are present and functional. Thanks!

Nibmeister

That is possible, unlikely but all you can do just use the 1click in a new folder and do the same approach see if that is a problem with your current install or not

Aitrepreneur

used the 3.5 model bat. Updated all ComfyUI. Installed Missing Nodes. Updated Comfy UI. Reboot ComfyUI. Refresh browser. Restart PC. Same issue. Make new workdflow then reload the mega workdflow json. Still hitting the same issue. I don't really want to do the one click install for the whole comfy UI as it's working fine for my flux models. It says the issue is with the checkpoint, I've got the 3.5_large.safetensors in the checkpoints folder in comfy UI after running the SD3-5MODELS-INSTALL.bat inside the ComfyUI_windows_portable/ComfyUI folder Could the file name length have anything to do with it? A:\AI\ComfyUI\new_ComfyUI_windows_portable_nvidia_cu121_or_cpu\ComfyUI_windows_portable\ComfyUI

Sam Shennan

you sure you got everything set up correctly and everything was downloaded and you updated comfyui?

Aitrepreneur

the unoptimized model is like 20gb but the gguf ones are like much much smaller (I saw one that can do 4gb vram apparently?) but no matter how much vram you got it will work, it will just take longer

Aitrepreneur

CheckpointLoaderSimple Error while deserializing header: MetadataIncompleteBuffe I keep getting this error In the terminal I see this: safetensors_rust.SafetensorError: Error while deserializing header: MetadataIncompleteBuffer

Sam Shennan

Thank you for this! Worked perfectly first time through. I'm amazed that SD still has mutated hands, too many fingers, after all of these "improvements". In some cases I think FLUX is still doing a better job. I guess we'll see where these continued progressions take us.

PTMarks

Yeah that was happening to me. Aitrepreneur is right. Try F5, then clear the workflow and reload the json file. Don't just reopen the json file, clear it first by starting a new workflow then reload the json file. That worked for me.

Brian Zufelt

"Install Missing Custom Nodes" is empty. Also when json file is loaded again.

ZenzeosArt

How much VRAM does it take to run? I''m only on a 3080 with 10 vram and 64gb ram

Sam Shennan

Ha damnit, Thats what I get for trying to jump ahead. Thank you

Brian Zufelt

Always the same issue whenever you load a brand new workflow, read the patreon post. 1. Update comfyui 2. Click on "Install Missing Custom Nodes" and click on the first small checkbox to select all the nodes and then click install. 3. It will then ask you to restart, so click on that restart button, wait for the webui to reboot 4. Click the refresh button (F5) 5. If the message is still there but all nodes are installed, just clear the workflow and reload the json file inside

Aitrepreneur

Rather, nodes below.

Nibmeister

I have a similar problem to the above. After updating a long standing ComfyUI installation and rebooting, ComfyUI Manager can't find the missing nodes listed above. Is there a link to these nodes for a manual install?

Nibmeister

it's just a new comfyui ui, it's been moved to a small floating bar at the bottom that you can more to wherever you want

Aitrepreneur

yeah I know that's what the step 5 is for, it's just comfyui being stupid, everything is installed correctly but it still display the error message, just clear the workflow and reload the json file again into the webui

Aitrepreneur

I installed to my pre-existing build. Everything seems to work, but the add to queue buttons are gone from the top bar, I have to use the control+enter keyboard command to add to the queue. Is there a way to add it back? I dug through the settings and couldn't find it.

JpaLVVmI6c8xM00

Hi Aitrpreneur, Thanks for the quick reply. I did that and it worked great on your FLUX tutorial. However once I get to step 2 there are no missing nodes to install. But every boot it calls out those nodes as missing. I go to the "Install Missing Custom Nodes" and nothing is there to install again. Not sure where to go next

Brian Zufelt

Always the same issue whenever you load a brand new workflow, read the patreon post. 1. Update comfyui 2. Click on "Install Missing Custom Nodes" and click on the first small checkbox to select all the nodes and then click install. 3. It will then ask you to restart, so click on that restart button, wait for the webui to reboot 4. Click the refresh button (F5) 5. If the message is still there but all nodes are installed, just clear the workflow and reload the json file inside

Aitrepreneur

After using the batch files to install Comfy UI and updating then installing missing nodes I still show these nodes are not found. However the manager "install missing nodes" says there are no missing nodes. I have only used your batch file and updated Comfy ui from the manager. Thank you for your help here is the missing nodes " workflowsamplerimg2img workflowotherimg2img workflowinpaintingparam workflowinpaintother workflowimage workflowotherimg"

Brian Zufelt


Related Creators