BOUTIQUE Cat Nose + Paw Print Clickers EARLY ACCESS
Added 2025-04-27 02:30:05 +0000 UTCHey everyone!
New clickers this month! Sooooo many of you were asking for a cat nose boop clicker to go with the dog boop, as well as a paw print clicker! I think these turned out so cute and fun <3
Filament is Hatchbox matte black and Ziro Purple Sunset. Multicolor 3MF files plus keychain and non-keychain versions included.
Print recs:
2-3 walls
5-15% infill
No supports
Print with an outer and inner brim for the top piece.
The paw print the color change should happen at layer 34 and for the nose at layer 53
These are the key switches I used: amazon.com/dp/B0CBPR6SVL?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Refer to the boutique + Deluxe + Original seller tier download link: https://www.patreon.com/posts/boutique-model-103246509?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link
I hope y'all like them!
Thanks so much for all your support <3
Kek
Comments
How much filament does it take to print one clicker ?
Vengai
2025-05-24 22:55:33 +0000 UTCAnyone have links to switches Iβm in Australia the link on the post isnβt working for me
Kobe
2025-05-18 07:25:14 +0000 UTCHey there! What keyboard switches are you using? These ones have the updated internal clicker casing.
Kirsten McKenzie
2025-05-03 03:41:42 +0000 UTCHi, I just printed one first test nose and for some reason it did not really work. My switch suits not very good very loose) and the nose is extremely "high". But I used the same switches for the dog nose and they worked totally fine. Do you have any idea what I made wrong?
Christina
2025-05-03 02:36:43 +0000 UTCIs it possible for you to make a dog paw one? I'd love to have the matching nose and paws to use for both for a local shelter charity fundraiser. <3
Kayla Sheaffer
2025-04-30 18:38:21 +0000 UTCWhat am I missing? I printed the two pieces, and I can get them together, one fits inside the other but that's it. Can you provide assembly guidance please. Is there a spring that is needed or something.
Imaa Surefire
2025-04-30 17:27:52 +0000 UTCDid you slice the file and show filament colors when sliced? In just the preview it will be the same colors since the color change is set at a layer height, not with painting :)
Kirsten McKenzie
2025-04-30 00:22:12 +0000 UTCI tried the clored nose clicker but both pieces were the same solid color when they open in bambu studio
Kristi Patterson
2025-04-28 12:48:38 +0000 UTCThanks!! And yes! Both have versions with keychain loops included :) you're also welcome to add your own if you prefer
Kirsten McKenzie
2025-04-27 08:15:36 +0000 UTCAdorable. Any plans to add a keychain attachment? Or do you mind if I add a small cylinder + hole, to the model, to make it possible?
ToddysTrinkets
2025-04-27 08:14:30 +0000 UTCIf you open the paw print 3MF file and slice it it should have the colors set already :) It won't show up before you slice since I have it set to color at a layer height change vs area. Makes it a much faster print. Slice it and then choose "filament" to see the color differences.
Kirsten McKenzie
2025-04-27 05:21:12 +0000 UTCThese are great. I was going try to print pad with the toe beans lighter color like your photo but only the right and left side would change independently. When I try the other two beans it changes the rest of the pad too. If you can check the file I would appreciate it. I use Bambu Studio to slice. I just loaded the latest version a few days ago it could be a glitch.
Jody
2025-04-27 05:18:19 +0000 UTC<3
Kirsten McKenzie
2025-04-27 05:12:36 +0000 UTCYessss <3
Kirsten McKenzie
2025-04-27 05:12:32 +0000 UTCThanks!
Kirsten McKenzie
2025-04-27 05:12:28 +0000 UTCOhhhh how awesome!
Erin
2025-04-27 03:08:53 +0000 UTCCan't wait to put these on the plate β€οΈ
Awoken
2025-04-27 02:57:06 +0000 UTCYaaaaaaay ππππππ
Christina
2025-04-27 02:32:06 +0000 UTC
