FLEXI T-Rex + Baby EARLY ACCESS
Added 2025-03-01 01:13:26 +0000 UTCHey everyone!
We got a double drop today because the end of Feb snuck up on me with how short it is. So here's the flexi community suggestions winner, the t-rex! So many of y'all have been asking for dino flexis for ages and honestly they've very much intimidated me. But I finally felt ready to give it a go and after MUCH testing to get this big guy balanced, I'm really happy with him!
Filament is Numakers light gray and hand painted. Multicolor Bambu 3MF files included and keychain and non-keychain versions of the baby
Print recs:
2-3 walls
5-15% infill
No supports
Add brim if needed
The big t-rex's legs slot into his hips slightly to help him stand stable, so some pretty up should secure him.
Refer to the Flexi + Deluxe + Original seller tier download link: https://www.patreon.com/posts/flexi-model-site-103246452?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link
I hope y'all like them!
Thanks so much for all your support <3
Kek
Comments
It takes some balancing, but lock in the hip sockets and then bend the knees forward and then the joints will rest on themselves without needing to be tight.
Kirsten McKenzie
2025-03-28 22:24:51 +0000 UTCi think its the knees. the ball joint right under the hip is a bit loose so it folds inward rather than staying up
Sadi Alford
2025-03-28 22:19:35 +0000 UTCOhhh!
Sadi Alford
2025-03-28 22:15:59 +0000 UTCBe sure to press the legs upwards into the hip sockets and they'll kind of snap into place to give it more stability! :)
Kirsten McKenzie
2025-03-28 20:03:32 +0000 UTCI printed this gorgeous dino at 105% and i cant get it to stand up! it will without the head but if i put the head on it topples over
Sadi Alford
2025-03-28 15:46:44 +0000 UTCHow did you get the tail to 300%, largest I can get is 140 on a build plate!
Doug Johnson
2025-03-14 15:30:23 +0000 UTCThe painted brims worked swell actually! That’s my fault, sometimes I can get lazy with how good these printers are these days.
Joshua Mercer
2025-03-11 17:50:59 +0000 UTCThanks for letting me know; I'll keep a lookout for it.
AndyMel2
2025-03-10 11:41:01 +0000 UTCNot yet, but it will be public in a few weeks :)
Kirsten McKenzie
2025-03-10 04:10:07 +0000 UTCI am a Boutique subscriber, but I would like to buy this one; is it available for that please?
AndyMel2
2025-03-09 21:34:04 +0000 UTCDid you try brims on them?
Kirsten McKenzie
2025-03-09 05:55:12 +0000 UTCHey Kekreations, I have tried every single trick in the book to get the body of this guy to print off and no matter what I try around the 80-90 layer the right arm chucks itself off the build plate. I've resigned myself to the fact that he'll just have some "battle damage" for the print that I'm running now, but I've tried different build plate materials, different speeds, glue, different infill types...any no matter what I do that right arm always flies off. I'm gonna try some painted brim ears and see if that'll go but the contact area of these arms is TINY.
Joshua Mercer
2025-03-08 20:34:21 +0000 UTCSo I use a brand new mini sd card and did the right things and still did it.i redownloaded the files too. I can print other things just fine except I noticed the chameleon did the same thing. Not sure if I’m doing something wrong. Im going to try the egg to see if it’s something I’m doing wrong.
Andrea
2025-03-08 13:29:12 +0000 UTCIt seems like maybe the G-code got corrupted or something, did you try re-downloading and re-slicing to print again?
Kirsten McKenzie
2025-03-08 05:28:17 +0000 UTCSo Im trying to make the T-Rex and for some reason some of the prints just stop after the first layer, is there something I should be doing? I printed the tail and that was fine. Im going to try again.
Andrea
2025-03-08 00:49:52 +0000 UTCThanks! It's just Numaker's light gray and then a brown acrylic wash over it :)
Kirsten McKenzie
2025-03-03 07:28:35 +0000 UTCI love this, and I really like that filament color. What brand and filament is that?
Paul Harvey
2025-03-03 03:44:33 +0000 UTCAwesome! <3
Kirsten McKenzie
2025-03-02 22:57:35 +0000 UTCThat's 100% scale :)
Kirsten McKenzie
2025-03-02 22:57:31 +0000 UTCThanks so much! That's awesome!
Kirsten McKenzie
2025-03-02 22:57:23 +0000 UTCPoly maker has some great military colors that would look great without paint. I love their olive green, army green and I can’t remember the name of the matte grey mix they have that I like.
Robi
2025-03-02 22:08:37 +0000 UTCHoping for more dinosaurs! 🙏
Skye Wade
2025-03-02 18:18:15 +0000 UTCcan i please ask what scale the big dinosaur is printed at ? the one that you are holding in the picture. thanks
sheri davies
2025-03-02 13:19:49 +0000 UTChi, im loving your designs and at the moment currently printing the dragon in 300%
sheri davies
2025-03-02 13:18:05 +0000 UTCAwww yay! Thank you so much!!
Kirsten McKenzie
2025-03-02 07:43:16 +0000 UTCThank you!!
Kirsten McKenzie
2025-03-02 07:42:01 +0000 UTCThis is amazing!
jessuhhlee
2025-03-02 05:19:24 +0000 UTCAh! 'pressure up' I was so tired when I posted this lol. I hope he likes it!!
Kirsten McKenzie
2025-03-02 00:19:34 +0000 UTCI don't understand, "Some pretty up should secure him"? BTW, I love this design. I just had a customer requesting a T-Rex and had to tell him there weren't really any good designs out there. Now I can tell him there is!
Suki
2025-03-02 00:05:11 +0000 UTCWow this has to be my favorite one you've done since ive been subscribed!
Funk Of Pops
2025-03-01 16:37:21 +0000 UTCYay! Thanks so much!
Kirsten McKenzie
2025-03-01 07:03:18 +0000 UTCAw yayyy thank you!
Kirsten McKenzie
2025-03-01 07:03:13 +0000 UTCThanks!! These are just basic craft acrylics that have been watered down :) They hold up well for display but not necessarily excessive handling.
Kirsten McKenzie
2025-03-01 07:03:08 +0000 UTCWow. This is EPIC.
J K
2025-03-01 06:53:55 +0000 UTCI knew yours will be the best ❤️❤️❤️ Love them! ❤️❤️
Tonia Kowalczyk
2025-03-01 06:25:50 +0000 UTCNice!! What kind of paints and how well does the paint hold up?
Michelle
2025-03-01 01:44:21 +0000 UTCAww yay! Thanks <3
Kirsten McKenzie
2025-03-01 01:29:39 +0000 UTCYay! <3
Kirsten McKenzie
2025-03-01 01:29:34 +0000 UTCHahaha yes xD
Kirsten McKenzie
2025-03-01 01:29:27 +0000 UTCHaha thank youuuu!
Kirsten McKenzie
2025-03-01 01:29:22 +0000 UTCYay!
Kirsten McKenzie
2025-03-01 01:29:18 +0000 UTCMy son is going to love this one, great job!!
Shalyse
2025-03-01 01:27:42 +0000 UTCThat's what I needed😁
Zdaniec
2025-03-01 01:27:38 +0000 UTCLol
Andrew Sheffield
2025-03-01 01:27:16 +0000 UTCThat tail is Thicc
Andrew Sheffield
2025-03-01 01:27:15 +0000 UTCHooollllly cow. I need like 3 more printer to keep up with you and so much filament haha
Andrew Sheffield
2025-03-01 01:26:55 +0000 UTCHoly Amazeballs Batman! Wish I had some painting skills, but I will find another way to do these justice haha
Kev Martin
2025-03-01 01:26:40 +0000 UTCI know what I’m printing next, wow
Callys3DPrinting
2025-03-01 01:25:14 +0000 UTC
