FLEXI Raven + Baby Keychain EARLY ACCESS
Added 2024-09-15 22:27:00 +0000 UTCHey everyone!
I am SO EXCITED to finally get y'all this beautiful raven model! I know a ton of you have been asking for different birds for ages and I've been working on figuring out the exact look and mechanics I want for them, especially the wings. I FINALLY have some beautiful birds I'm so happy with! Starting off with my love for corvids, the raven was the perfect release leading up to fall and Halloween!
Filament is D3D Black, keychain and non-keychain version of baby included.
Print recs:
2-3 walls
5-15% infill
No supports
Print 1 connector for adult head, wings pop into the shoulders and 2 wing pieces snap together.
I love this beautiful baby and I'm so excited to get more birds to y'all! Let me know which ones y'all want to see <3
Refer to the Flexi + Deluxe + Original seller tier download link: https://www.patreon.com/posts/flexi-model-site-103246452?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link
I hope y'all like them!
Thanks so much for all your support!
Kek
Comments
Thanks so much! Ohhhh that's a great idea! They're beautiful!
Kirsten McKenzie
2024-09-28 02:53:59 +0000 UTCThis is awesome! Any chance you could make a cardinal in the future, I find that anything cardinal sells great especially around the holidays!
keith davis
2024-09-27 14:24:49 +0000 UTCWhat kind of trouble are you having?
Kirsten McKenzie
2024-09-26 03:49:12 +0000 UTCThis model is amazing but had some trouble with the clips on the wings, any suggestions would be appreciated
dsmithr
2024-09-26 02:46:05 +0000 UTCYayyyn I'm so glad you like him!! <3
Kirsten McKenzie
2024-09-24 06:11:20 +0000 UTCOMGGGG I love him so so much <3
Feral Bokatan
2024-09-23 22:07:52 +0000 UTCThanks so much!! I'm so glad you like it!
Kirsten McKenzie
2024-09-21 04:53:46 +0000 UTCThis is amazing!!! Thank you!
Paige
2024-09-20 18:38:21 +0000 UTCI didn't put glue on the plate because it is one of those that puts the holographic look on the print. I wasn't sure if glue would mess with that
Lori Hinkley
2024-09-19 14:01:47 +0000 UTCTry using more glue spray on the plate. I always keep it quite sticky.
Iryna
2024-09-18 13:22:58 +0000 UTCI don't know what I did, but even with the brim, It did not stick to my smooth plate. It printed great on the textured plate. turned out awesome.
Lori Hinkley
2024-09-18 13:14:06 +0000 UTCOhhhh yes, definitely love those birds!!
Kirsten McKenzie
2024-09-18 00:19:55 +0000 UTCIm trying to design a BoP chess set because I'm a licensed falconer and a bird nerd. Would love to see a falcon, hawk, eagle, etc.
Joni Goodman
2024-09-17 16:05:34 +0000 UTCThanks! I've printed it at 90% yesterday. Works fine. However, the joints are pretty loose. I can't make the wings to stay upwards.
Iryna
2024-09-17 09:59:16 +0000 UTCI've printed it on a smooth plate yesterday. Added brim on the wings. Turned out very well.
Iryna
2024-09-17 09:57:42 +0000 UTCThanks so much!! Down to like 80% or so I'd say is probably pretty safe :)
Kirsten McKenzie
2024-09-17 04:17:54 +0000 UTCYay! I'm so glad you like it!
Kirsten McKenzie
2024-09-17 04:17:35 +0000 UTCThanks so much!! My beta testers test on a variety of different printers so it should do fine! I use a smooth PEI plate personally. I'd add a brim if you're unsure about it :)
Kirsten McKenzie
2024-09-17 04:17:27 +0000 UTCThanks so much!! I'm so glad!
Kirsten McKenzie
2024-09-17 04:16:55 +0000 UTCYay! I'm so glad you like it. Ohhhh yes definitely!
Kirsten McKenzie
2024-09-17 04:16:48 +0000 UTCYAY!!! He is amazing!!!! I love it!
Lioness2000
2024-09-16 22:05:11 +0000 UTCI want to print this next. How well do you think it will do on the smooth plate so that it will have the cool pattern on the flat parts?
Lori Hinkley
2024-09-16 15:02:01 +0000 UTCI love this model!!! Can you please advise how much I can scale it down safely for the print still to work well?
Iryna
2024-09-16 10:13:38 +0000 UTCHonest love this print 💙💙
crowenest3dcreations
2024-09-16 09:13:53 +0000 UTCyou can't be trusted, everything is your favourite 😉
Tonia Kowalczyk
2024-09-16 04:37:06 +0000 UTCand raven head keychain 😍 and as always love your work
Tonia Kowalczyk
2024-09-16 04:36:08 +0000 UTCPrinted the baby keychain and the Raven. They tuned out beautiful. Very nice work. Would like to see some raptor birds.
Ray
2024-09-16 03:40:56 +0000 UTCThanks so much!
Kirsten McKenzie
2024-09-16 03:38:01 +0000 UTCOhhh yes, super!
Kirsten McKenzie
2024-09-16 03:37:55 +0000 UTCPerfect! I just applied for a Nevermore Witch market yesterday.
Data Diva
2024-09-16 03:16:33 +0000 UTCVery cool, nevermore
Andrew Sheffield
2024-09-16 03:02:31 +0000 UTCOMG I'm so happy to hear that 🥰🥰
Kirsten McKenzie
2024-09-16 02:31:51 +0000 UTCYay! I'm glad you like them! And oh that's great to hear! I'm so glad! ❤️
Kirsten McKenzie
2024-09-16 02:31:39 +0000 UTCThanks so much!! Yessss great!
Kirsten McKenzie
2024-09-16 02:30:34 +0000 UTCOhhh love that! I'll add it to my list!
Kirsten McKenzie
2024-09-16 02:30:23 +0000 UTCOMG Yayyy perfect! I'm so glad y'all like it!
Kirsten McKenzie
2024-09-16 02:30:15 +0000 UTCAww thank you so much!! That means so much to me ❤️
Kirsten McKenzie
2024-09-16 02:30:13 +0000 UTCYou continue to shock me with your ability to make your models look so real. Ugh, I just love your art work Kek!
Melyssa Daulton
2024-09-16 01:06:01 +0000 UTCI printed off two babies and they're so cute! I also wanted to say thank you because the big one will fit all the pieces on one plate of my A1 mini (if I rotate the body). I have a big printer, but it's more about the speed and convenience of being able to use the mini and not having to scale down
Elijah Conrad
2024-09-16 00:38:26 +0000 UTComg my hubs is going to be so excited about this! we are bmore ravens fans and we just posted the purple and black ravens tower on tik tok and he already put it in his man cave lmao! i know he is going to make me make this too
Stephanie Hill
2024-09-15 23:26:46 +0000 UTCCan u make a raven skull hair pin?
Tara L Fansler
2024-09-15 23:24:57 +0000 UTCAAAAAHHHHH!!!
Kythera of Anevern
2024-09-15 22:56:50 +0000 UTCWow I love it! Been working on Halloween prints this week and this guy is perfect
Callys3DPrinting
2024-09-15 22:41:27 +0000 UTCThank you so much!! Yesssss different styles are always fun to see! <3
Kirsten McKenzie
2024-09-15 22:36:56 +0000 UTCSo realistic and beautiful!! Everyone is putting out cutesy versions, which is fine, but I’m so excited for your version!!
Carol Tilbury
2024-09-15 22:36:19 +0000 UTCYay! Thank you so much <3
Kirsten McKenzie
2024-09-15 22:35:34 +0000 UTCIt's so tiny!! One of my favorite things tbh lol. I'm so glad you like it!!
Kirsten McKenzie
2024-09-15 22:35:29 +0000 UTCThanks so much!! Yesssss me too! Oh yes that'd be fun!
Kirsten McKenzie
2024-09-15 22:35:13 +0000 UTCThank youuuu!
Kirsten McKenzie
2024-09-15 22:35:01 +0000 UTCThe baby 😭 I love it so much!
Paradoxal_Dinosaur
2024-09-15 22:33:18 +0000 UTCOmg! So excited to get home and print this!!!
Martine Lupton
2024-09-15 22:32:59 +0000 UTCThis is so exciting! My husband loves ravens. Maybe I can get one printed before he finishes D&D tonight!
Elijah Conrad
2024-09-15 22:31:42 +0000 UTCNiiiice 💯
Zax Dezignz
2024-09-15 22:30:06 +0000 UTCYou just made my YEAR. 🖤 🐦⬛
Brooke Leigh
2024-09-15 22:29:11 +0000 UTCOMGGGGGGGGGGGGGGGGG
Brooke Leigh
2024-09-15 22:28:59 +0000 UTC
