BOUTIQUE Spooky Lantern EARLY ACCESS
Added 2024-09-09 22:46:11 +0000 UTCHey everyone!
New Halloween decorative design! I'm super happy with how this piece turned out, It looks so cool! It's totally support free and the panels are interchangeable! I'd love to add more decorative and different holiday panels for this lantern, so let me know what themes y'all would like to see!
Multicolor Bambu 3MF included for color swaps at proper layers. Filament is Hatchbox white and D3D black.
Print recs:
5-10% infill
2 walls
feel free to size up and down as desired
for two color sheets, print separate from lantern and color change set at layer 4 (0.9mm)
Add brim if you have curling on the edges of the lid and body.
Refer to the boutique + Deluxe + Original seller tier download link: https://www.patreon.com/posts/boutique-model-103246509?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link
I hope y'all like it!
Thanks so much for all your support <3
Kek
Comments
Ty!
carrie roehrig
2024-10-08 22:03:11 +0000 UTCYes! Totally :) You can also go in your slicer and chop off the raised layers int he meantime!
Kirsten McKenzie
2024-10-08 20:48:08 +0000 UTCAny chance you plan to do blank white inserts?
carrie roehrig
2024-10-08 17:55:13 +0000 UTCthank you
Monkey Momma
2024-10-07 00:19:05 +0000 UTCThat should just BARELY fit a 2.5" light! :) I'd maybe scale up like 5% or so to make sure you have some wiggle room
Kirsten McKenzie
2024-10-06 21:26:37 +0000 UTCWill the circle inside at 100% hold a Puck light about 2.5 inches/62mm?
Monkey Momma
2024-10-06 02:58:45 +0000 UTCHere for this question too!!!! Did you find a better light?
Christi
2024-09-27 13:25:28 +0000 UTCYay! Nope, it does not :)
Kirsten McKenzie
2024-09-26 03:50:54 +0000 UTCAbout to lock and load this one :P Does the frame/top need supports?
Martine Lupton
2024-09-24 20:07:51 +0000 UTCYessssss1
Kirsten McKenzie
2024-09-23 02:40:19 +0000 UTCNeed extra panels, witch hats, pumpkins, skeletons, black cat 😏
Awoken
2024-09-22 23:04:05 +0000 UTCDid the body and the top of the lantern. Awesome. Just did my first side wall. I have an Ankermake M5C and took a bit of investigating, but found how to add the "pause" to change filament. M5C only allows one filament at a time. It worked!!! Thank you. Thank you. Thank you!!! Let's get those Christmas panels going
Milja Saldarriaga
2024-09-21 19:02:25 +0000 UTCWhat tea lights is everyone using? I have small ones and they are not very bright shining through the panels.
Sewfor54
2024-09-19 18:15:54 +0000 UTCOhhh that'd be fun!
Kirsten McKenzie
2024-09-17 04:18:06 +0000 UTCOoh what about sports themed
Skye Wade
2024-09-16 16:05:59 +0000 UTCThanks so much!!
Kirsten McKenzie
2024-09-15 22:28:33 +0000 UTCLove it!!
Mateusz Kłos
2024-09-15 09:37:06 +0000 UTCYay! I'm so glad <3 Thanks so much!
Kirsten McKenzie
2024-09-13 02:22:27 +0000 UTCYes sales & marketing (wife) 😉 loves the lantern and thinks panels for thanksgiving and Christmas are great ideas. Printed great no issues printing without any supports. Great work K
CRAIG HOPKINS
2024-09-13 02:14:32 +0000 UTCYessss totally!
Kirsten McKenzie
2024-09-13 01:21:29 +0000 UTCYayyy! I'm so glad you like it!
Kirsten McKenzie
2024-09-13 01:21:14 +0000 UTCDid you follow the link in the post to the download site? :)
Kirsten McKenzie
2024-09-13 01:21:04 +0000 UTCYay! I'm so glad :)
Kirsten McKenzie
2024-09-13 01:20:44 +0000 UTChow come i can't see the file?
Alicia Greenland
2024-09-12 23:57:24 +0000 UTCI love it and so does my wife. Guess I'm gonna have to buy a Kobra 3 soon.
David Banks
2024-09-10 21:18:26 +0000 UTCEeeeps!!! I’ve been wanting to find a cool interchangeable lantern! This is awesome!
Carol Tilbury
2024-09-10 18:25:22 +0000 UTCThanks so much! Hope you enjoy it! Omg yesssss so annoying.
Kirsten McKenzie
2024-09-10 17:22:48 +0000 UTCYep! Just schedule a manual color change at the noted layer in the post :)
Kirsten McKenzie
2024-09-10 17:22:31 +0000 UTCThanks so much! Ohhhh yes totally!
Kirsten McKenzie
2024-09-10 17:22:04 +0000 UTCAwesome thank you! I might have to get some if I’m going to make some spooky lanterns
Callys3DPrinting
2024-09-10 17:01:50 +0000 UTCLove this. Going to print this today, as soon as I find an sd card. Bambu cloud is down on my end .
Cyn
2024-09-10 12:04:21 +0000 UTCSo you can also print this if you don t have ams but use color swap?
Muffina
2024-09-10 07:08:53 +0000 UTCReally cool🤩! I would like it with blank sheets, with window division and fall design😍
Lidia Heinzel
2024-09-10 06:15:15 +0000 UTCYay!
Kirsten McKenzie
2024-09-10 05:24:36 +0000 UTCHaha aww thank you!
Kirsten McKenzie
2024-09-10 05:24:33 +0000 UTCI'm so glad!
Kirsten McKenzie
2024-09-10 05:24:27 +0000 UTCYep, the white I used here is pretty opaque but still shines totally fine! Thanks so much! lol VERY small, some of my first tests were tiny, probably smaller than 50% xD
Kirsten McKenzie
2024-09-10 05:24:20 +0000 UTCYayyy I'm so glad!
Kirsten McKenzie
2024-09-10 05:23:42 +0000 UTCJust like a small electric tea light that's about 1.5 inches in diameter. A larger one would work even better but I didn't have one lol. I'm so glad you like it!
Kirsten McKenzie
2024-09-10 05:23:35 +0000 UTCLove it
Anna Fleming
2024-09-10 02:26:37 +0000 UTCWell, this made me upgrade to deluxe seller.
Melyssa Daulton
2024-09-10 02:26:03 +0000 UTCthis is going on the printer tonight!
Cross3d
2024-09-10 00:29:24 +0000 UTCWill any white work for the panels? It looks amazing! I’m wondering how small I can print it….
The Cheeky Geek
2024-09-09 23:32:39 +0000 UTCI......I.......OMG! I'm in love!
Milja Saldarriaga
2024-09-09 23:32:03 +0000 UTCWhat light did you use inside it to light it up? It is amazing by the way I love 3d lithophane lamps
Callys3DPrinting
2024-09-09 23:31:00 +0000 UTCYay! I'm so glad <3
Kirsten McKenzie
2024-09-09 23:20:02 +0000 UTCLove this!
Jennifer
2024-09-09 23:19:04 +0000 UTCYes that's definitely my plan! And ohhhh a basic fall one would be pretty, too! Good idea!
Kirsten McKenzie
2024-09-09 23:16:19 +0000 UTCThanks so much! Yesssss I definitely agree! Those are great ideas!
Kirsten McKenzie
2024-09-09 23:15:53 +0000 UTCThanks so much!! I'm so glad you like it! <3
Kirsten McKenzie
2024-09-09 23:15:29 +0000 UTCI’d love to see a Christmas version! Also a Fall themed panel with leaves/ pumpkins would be nice!
Michelle Carter
2024-09-09 23:03:15 +0000 UTCSo cool! I hope you make thanksgiving, Christmas, Valentine's, Easter, and independence day plates to swap out! I see this as a great all year seller!
Brianna Nash
2024-09-09 23:02:26 +0000 UTCAnother Rad Hit Kek! I love this! Going On my Market PLace ASAP! Woot!!!
Larry Myers
2024-09-09 23:01:24 +0000 UTC
