BOUTIQUE Cosplay Horn Set EARLY ACCESS
Added 2024-09-01 00:31:17 +0000 UTCHey everyone!
Now the boutique community suggestion winner! I know a lot of y'all have been wanting cosplay horns for a long time, so I'm super excited to see what y'all do with these! This set has 6 different horn styles for y'all to play with and offer! (some labeled 1 or 2 for the mirrored pieces if they're not symmetrical) If y'all like these I'd be open to adding more horn styles and different ears and such in the future too!
For my examples here I superglued alligator clips onto the horns that I can clip into my hair or onto a hair band. Some of the beta testers glued the horns straight onto a headband or added holes for magnets or headbands in their slicers, which are mods allowed for these!
Filament is eSUN light brown.
Print recs:
5-10% infill (lightening infill also works well for these!)
2 walls
add brim if needed
no supports
feel free to size up and down as desired
Add string or magnet holes for connections as desired, tutorial here: https://youtu.be/7QCRl9l5rUg?si=HYsnZegz7QxU7j3E
Refer to the boutique + Deluxe + Original seller tier download link: https://www.patreon.com/posts/boutique-model-103246509?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link
I hope y'all like them!
Thanks so much for all your support <3
Kek
Comments
I used hot glue or gel superglue! :)
Kirsten McKenzie
2024-10-10 21:52:50 +0000 UTCWhat glue are you using for the clips? Have a ren faire coming and trying to figure best way to use these.
Laser Tek Creations
2024-10-10 20:50:49 +0000 UTCIt'll be up on MMF and Cults3D later today! :)
Kirsten McKenzie
2024-10-03 19:52:24 +0000 UTCI cannot find these anymore. They are not in the downloads or MMF
Andrea DeJong
2024-10-03 16:06:09 +0000 UTCAww yay! Glad you like them!
Kirsten McKenzie
2024-09-24 06:11:02 +0000 UTCOMG how did I miss this! I got 4 days to print as many as I can for a convention!
My Island, My Autism
2024-09-24 03:24:12 +0000 UTCYesssss!
Kirsten McKenzie
2024-09-07 03:29:05 +0000 UTCOMG Ren Fest is going to LOVE these!!
Andrea DeJong
2024-09-07 00:15:16 +0000 UTCYay! I'm so glad <3
Kirsten McKenzie
2024-09-06 04:42:49 +0000 UTCI LOVE these!!!
Lioness2000
2024-09-06 01:42:16 +0000 UTCYes that's totally fine! :)
Kirsten McKenzie
2024-09-04 21:45:16 +0000 UTCThanks so much! Ohhh yes!
Kirsten McKenzie
2024-09-04 21:45:08 +0000 UTCOhhh yay! Perfect!
Kirsten McKenzie
2024-09-04 21:45:01 +0000 UTCWould an allowable modification be adding a curve to the bottom of the horns? I don't mind doing supports and I think a roundness would make them fit better. At least with how I was going to put them together.
TDrumm3D
2024-09-04 16:28:11 +0000 UTCOh my gosh! Cute! This would be a cool idea for seasonal ones!
Skye Wade
2024-09-04 02:24:38 +0000 UTCCan’t wait to see how these go this weekend at a comic book/toy show I am doing. Printing a couple of each to see and a pair to wear myself. They are all so cute I am not sure which ones I want to wear.
Robi
2024-09-04 02:23:52 +0000 UTCOhhhhh I haven't seen that yet
Kirsten McKenzie
2024-09-04 01:41:15 +0000 UTCThe antlers remind me of the netflix series Sweet Tooth ❤️
kaz watts
2024-09-03 21:13:07 +0000 UTCYes! I need to figure out how to add a slot of velcro ties.
Angel.S
2024-09-03 20:37:22 +0000 UTCOhhhh yes, that's great!
Kirsten McKenzie
2024-09-02 10:21:33 +0000 UTCThese are fab! I have a set from MakerWorld that has a slot for velcro ties (like cable ties) that go around my headphones, works really well
kaz watts
2024-09-02 09:46:00 +0000 UTCYes! It's totally fine to add the hole :)
Kirsten McKenzie
2024-09-02 05:29:15 +0000 UTCOhhh yay!
Kirsten McKenzie
2024-09-02 05:28:54 +0000 UTCI m not sure if it s allowed but if you mod holes in them you can just put an elastic band in it, it sits perfectly and invisible
Muffina
2024-09-01 19:50:54 +0000 UTCPrinting a few of these to take to Fanboy Orlando next weekend.
Lisa Caldes
2024-09-01 14:27:42 +0000 UTCYesssss <3
Kirsten McKenzie
2024-09-01 05:47:56 +0000 UTCThanks!!
Kirsten McKenzie
2024-09-01 05:47:52 +0000 UTCOhhhh yes!!
Kirsten McKenzie
2024-09-01 05:47:48 +0000 UTCI need to print all of these :)
carrie roehrig
2024-09-01 01:57:27 +0000 UTCVery cool!!!
Andrew Sheffield
2024-09-01 01:52:59 +0000 UTCEeeeeeee, I'm so excited to figure out how to add these to my dragon plushies!
Natalia Travis
2024-09-01 01:22:06 +0000 UTCAwesome ill do that thank you
Shire 3D
2024-09-01 01:21:27 +0000 UTCYay! I'm so glad you like em!
Kirsten McKenzie
2024-09-01 01:00:23 +0000 UTCYay! I'm so glad!! And if you want to add a negative space (like part of a sphere) in your slicer to get more of a curve on the bottom you can do that! :) I made them flat so they'd be easily printable.
Kirsten McKenzie
2024-09-01 01:00:16 +0000 UTCOmggggg these are awesome!
Liz Cauthorn
2024-09-01 00:58:41 +0000 UTCMy wife LOVES these horns!! Just a question anyway we could slightly curve the bases of them? Just to add more of a fitted to the head look?
Shire 3D
2024-09-01 00:56:25 +0000 UTCAwww yay!! I'm so so glad you like em!
Kirsten McKenzie
2024-09-01 00:47:34 +0000 UTCI'm so excited for these!! The cosplay stuff always makes all my friends and customers squeal in delight!
Kelly Reese
2024-09-01 00:47:10 +0000 UTCYayyyy! I'm so glad!
Kirsten McKenzie
2024-09-01 00:46:29 +0000 UTCI AM SO EXCITED!!!!! AAAAAH!!!!!!!
Paradoxal_Dinosaur
2024-09-01 00:46:05 +0000 UTCYay, you're so welcome!
Kirsten McKenzie
2024-09-01 00:41:20 +0000 UTCHeck yeah, thank you!!
Carusima Hikura
2024-09-01 00:40:34 +0000 UTCThanks so much! I hope so <3
Kirsten McKenzie
2024-09-01 00:40:03 +0000 UTCOh these look cool. I bet this would be a hot seller.
jake
2024-09-01 00:39:49 +0000 UTC:D <3
Kirsten McKenzie
2024-09-01 00:34:37 +0000 UTCOh my gosh oh my gosh oh my gosh!
Kassi Ketterer
2024-09-01 00:33:22 +0000 UTC
