Samsung S95B Color Calibration, 144Hz Overclock, & Brightness Boost
Added 2023-01-23 23:26:31 +0000 UTCThis will calibrate the display to a color temperature of around 6500K. It will also color balance the display so you can accurately edit photos and videos in HDR at 144Hz.
WITH HDR & AUTO HDR ENABLED IN WINDOWS!!!
1. Go to Picture, Expert Settings, Color, & set Brightness: 50, Contrast: 50, Color: 25, Contrast Enhancer: High, Color Tone Warm 2, & Peak Brightness: High.
2. Under White Balance Set R-Gain: 9, G-Gain: 0, & B-Gain: 1.
3. Under Color Space Settings Set Color Space: Custom & Color Gamut: DCI-P3.
4. Set Windows SDR Content Brightness to 5%.
5. Make Sure 12bit Color is Enabled in the Nvidia Control Panel under "Change resolution" (It will set it to 10bit at 144Hz).
6. Set Dynamic Range to Full.
7. Click "Customize" & check "Enable resolutions not exposed by the display", and then click "Create Custom Resolution".
8. Type in 144 for the refresh rate, select CVT reduced blank under the "Standard" drop down, click test, and press Ok to save it.
9. Now on the refresh rate select 144 under "PC" and hit "Apply".
10. WARNING TRY AT YOUR OWN RISK!!! Instructions to get Gsync working at 144Hz:https://www.reddit.com/r/OLED_Gaming/comments/uq6s37/how_to_fully_unlocked_4k_144hz_10bit_for_pc/
It worked for me, but you must have Gsync enabled first, and if your display no longer works reset your CRU and reinstall your Nvidia drivers.
11. ONLY INSTALL ICC PROFILE FOR DOUBLE CHECKING PROFESSIONAL COLOR WORK!!! It will greatly reduce brightness for a small improvement in color accuracy.
