Recommended Printer Settings
Added 2022-01-02 17:50:52 +0000 UTC
For any 3D printing related questions or issues, please contact our 3D Support team to get live support and solutions: discord.gg/djBydgk
All of our models are fully supported by Atlas 3D Support Solutions. Their professional team of engineers manually supports and test prints every one of our models for quality assurance.
Anyone can print our minis successfully by using our recommended printer settings, and we have a standard test file that we can provide to dial in your printer.
The below should be safe settings for the most widely used resin types. We use standard calibration tests to measure this, however the final calibration is up to you.
Resin types used: Siraya Tech Fast, Elegoo Standard, Anycubic Standard Grey. The team test prints each release on a mix of mono and non-mono screen machines (Anycubic Photon, Elegoo Mars, Phrozen Sonic Mini).
******************************
TERMS & CONDITIONS
All of the provided files remain the property of onepagerules; by becoming a patron, you are given a license only for your personal use of these files.
You may not sell, share, distribute, rent, transfer, copy, reproduce or republish the files in any way. You may also not sell, share, distribute, rent or transfer the prints that you make in any way, and you may not re-cast the prints either.
You may resize or cut the contents of the files for personal use, but you may not sell, share, distribute, rent, transfer, copy, reproduce or republish the result in any way. You may also not otherwise modify, duplicate, create derivative works of, disassemble, reverse compile or reverse engineer the files in any way.
Comments
Hello, could you please send us a private message here on Patreon to discuss this case? Thank you.
onepagerules
2025-09-05 16:41:04 +0000 UTCI presume rendering images of the models with the intention of sharing for use as 2D paper minis (or for use in a VTT setting) would violate the TOS?
Gormadt
2025-09-05 01:28:39 +0000 UTCOur models are not designed to be printed on FDM printers. However, you can reach out on the 3d-print-support channel on Discord to see if they can offer you assistance.
onepagerules
2025-06-03 18:16:49 +0000 UTCDo you guys have print settings for a FDM printer? (Bambu A1)
Agustín Gonzalez
2025-06-03 14:40:09 +0000 UTCI second this...
John Kizorek
2025-05-17 20:28:43 +0000 UTCCan you please update the printing settings as this appears to be outdated. Thank you
Chris Taylor
2024-10-25 21:35:57 +0000 UTCcan you update with newer 3d printers like the saturn 4 ultra
Robert Riese
2024-10-16 06:59:52 +0000 UTCI've only just recently started my journey with 3D printing and just become a Patreon this morning, so I really appreciate these recommendations, even if I have a few good friends always there for advice.
Tony Stephens
2024-10-05 18:18:01 +0000 UTCThis will sound dumb but does the Phrozen sonic mega 8k count as a mono screen?
Christopher Bishop
2024-09-18 02:34:58 +0000 UTCI'm using these settings on my Elegoo Mars 3 Pro with Elegoo's standard resin (2.0) with the most outstanding results!!! Thanks for sharing these settings.
Brian Hubbard
2024-03-25 20:52:37 +0000 UTCRecommendation for PLA?
Richard Bosch
2024-02-04 18:27:21 +0000 UTCwhere do I find the standard test file? my first attempt at printing with an Alkaid was utter rubbish.
Sgt Requiem
2023-12-31 02:52:47 +0000 UTCHello Jefferey! You can find help for 3D printing related questions in our discord: discord.gg/djBydgk
onepagerules
2023-09-28 19:12:49 +0000 UTCI have an Elegoo Saturn 8K, any chance you have recommended settings for it?
Jefferey McDowell
2023-09-20 21:41:46 +0000 UTCLicense question: are you allowed to resell a printed army that you have painted and played with if you no longer want it? I don't mean duplicating, but my own army made up of OPR miniatures. How do the rules see this? PS: no i do not want to sell my army 😜
Maik Kopperschmidt
2023-07-04 15:55:10 +0000 UTCThat would be against the terms of service, I'm afraid.
Jefferson Thacker
2023-03-02 17:13:16 +0000 UTCDoes using a 3d printed model as a prize at an OPR tournament count as "giving away" or would that be acceptable?
jacob blackburn
2023-03-01 02:36:12 +0000 UTCWhy can’t I print files and give them to my brother for free?
Eugen Goldstein
2023-02-27 22:10:42 +0000 UTCAs far as I've read, anycubic only works with self supplied slicer. I've had trouble with it as the newest update won't download.
Adam Cronin
2023-01-27 04:08:04 +0000 UTCSo the answer is?
Adam Cronin
2023-01-27 04:06:24 +0000 UTCFor any 3D printing related questions or issues, please contact our 3D Support team to get live support and solutions: discord.gg/djBydgk
onepagerules
2022-11-13 16:07:58 +0000 UTCHi! Would you have any suggested settings for DLP printer? (such as Anycubic Photon D2)?
Eric D'AMBRA
2022-11-12 07:14:03 +0000 UTCYou may not sell, share, distribute, rent, transfer, copy, reproduce or republish the files in any way. You may also not sell, share, distribute, rent or transfer the prints that you make in any way, and you may not re-cast the prints either.
onepagerules
2022-11-10 15:36:54 +0000 UTCI want to use OPR minis to train my painting skills. My plan was to sell the minis which I don’t want to keep. So no commercial selling, just used and unwanted stuff. Is this okay in your terms?
miniAnders
2022-11-10 05:51:39 +0000 UTCI would like to print some of the large terrain for the Mummified Undead, but my Elegoo Mars 2 Pro build plate is too small for some of the largest pieces (with supports). Are we allowed to have a third party print supplier print these for us?
Bruce Johnston
2022-09-11 19:33:10 +0000 UTCAnybody have settings for Vulcan resin on a Mars 3?
Alejandro Guedea
2022-08-12 18:11:33 +0000 UTCFor any 3D printing related questions or issues, please contact our 3D Support team to get live support and solutions: discord.gg/djBydgk
onepagerules
2022-08-10 12:23:15 +0000 UTCI have a elegoo mars 3 Pro and I have a few bottles of anycubic basic grey what's the recommended settings for printing with that resin on my machine for your models
Joshua Hutchinson
2022-08-10 12:14:40 +0000 UTCFor any 3D printing related questions, please contact our 3D Support team: discord.gg/djBydgk
onepagerules
2022-07-19 10:45:16 +0000 UTCDo you have any recommended settings for ELEGOO ABS-Like resin?
Natzo
2022-07-19 05:42:32 +0000 UTCMaybe one/some of the videos in my 3D printing playlist can help you. https://www.youtube.com/playlist?list=PLAucm-37TiISEzaMsWhGqOyvLi9DOFGOR
Sebastian
2022-05-04 17:31:05 +0000 UTCRsolve this issue then. If you have discord accessing/joining the server shouldn't be an issue.
Sebastian
2022-05-04 17:29:02 +0000 UTCThe issue obviously isn't the printer but your settings. If it worked with the default settings in Chitubox and not with there recommended ones here, well then go back to the default ones. Simple. Then start calibrating from there if your prints are not good quality. You also need to figure out why the print is failing. Is it too much or rather not enough exposure? Are the supports not strong enough or not enough of them? Since you can't post photos here, go to the Anycubic Facebook group.
Sebastian
2022-05-04 17:28:32 +0000 UTCHave you tested the Elegoo resin that is cleaned with water?
Matthew Grove
2022-04-04 17:12:54 +0000 UTCWould the settings be different for an Elegoo Saturn? I’m new to 3D printing. Thanks.
Matthew Grove
2022-04-04 17:11:17 +0000 UTCI can't get to the discord server as my discord wont let me.
Siôn-marc Simpson
2022-03-01 07:38:45 +0000 UTCFor any 3D printing related questions, please contact our 3D Support team: discord.gg/djBydgk
onepagerules
2022-03-01 01:44:50 +0000 UTCSiôn-marc Simpson Imnew to 3d printing so maybe theres something Ive missed., I did the test print perfectly., I started using Chitubox to slice as had issues with the Photon Workshop not reading my files from usb supplied even though it could read the test orint., I used the default settings inside Chitubox for mono x., which worked. I tried tweeking the settings inside chitubox to match the settings recormended here in this post but hd fail after fail. Im so fustrated spending all that dollar for mono x and cant get it to print without fails., Anyone here use a mono x through chitubox who can help me please? I cant get onto the discord to ask there email log in issues.
Siôn-marc Simpson
2022-02-28 22:45:08 +0000 UTCImnew to 3d printing so maybe theres something Ive missed., I did the test print perfectly., I started using Chitubox to slice as had issues with the Photon Workshop not reading my files from usb supplied even though it could read the test orint., I used the default settings inside Chitubox for mono x., which worked. I tried tweeking the settings inside chitubox to match the settings recormended here in this post but hd fail after fail. Im so fustrated spending all that dollar for mono x and cant get it to print without fails., Anyone here use a mono x through chitubox who can help me please? I cant get onto the discord to ask there email log in issues.,
Siôn-marc Simpson
2022-02-28 22:44:11 +0000 UTCIve had 3 failed prints in one day and Im close to hoofing my Mono x out of the window!
Siôn-marc Simpson
2022-02-28 22:39:31 +0000 UTCOk guys need some help/
Siôn-marc Simpson
2022-02-28 22:38:52 +0000 UTCIm trying your settings bro., Ive had 2 fails in one day! Im newbie to printing., Im using Chitubox for my Mono X Using their default Mono X settings and kept failing., So trying yours now bro., Let you know how I get on.
Siôn-marc Simpson
2022-02-28 20:25:53 +0000 UTCGuys, be sure to update firmware on Anycubic Mono x! And be sure to do it right (you need to update from 2 files, two times, not one!), becasue I did not and I was in a picke, because my printer started to fail EVERY TIME! If you have mono x and cant get it to work right, email me - badirama@gmail.com I will help you, becasue it was such a hussle for me to make mine work and I know how frustrating it can be...
Bartosz Badowski
2022-02-26 09:56:26 +0000 UTCIf you have any issues with 3D printing, make sure to contact our 3D Support team: discord.gg/djBydgk
onepagerules
2022-02-15 06:19:37 +0000 UTCI have the settings for the mono screen for my mono x and it still falling, please help me, im using resin anycubic grey.
the dungeon depot
2022-02-15 00:35:48 +0000 UTCAnycubic Mono X Anycubic translucent green or eSun clear Settings: exposure 2s bottom exposure 12s (full plate or big models - 15-20s) bottom layers 4 (full plate or big models - 5) lift speed - 60 down speed - 180 off time - 1s power - 60% perfect pritns from presupported stls every time.
Bartosz Badowski
2022-02-10 10:07:00 +0000 UTCI just got my first 3d printer (Elegoo saturn) and want to check if anyone has any recommendations for settings for printing these models on the Saturn?
Jeremy Short
2022-02-01 01:44:14 +0000 UTCUsually we recommend the Elegoo Mars 2 or Mars Pro 2 as a first printer, however if you ask on our discord, you will get a more personalized recommendation to suit your specific needs. :)
onepagerules
2022-01-18 16:53:26 +0000 UTCI'm just entering the world of 3d printing and looking for recommendations on a first printer. Was thinking about the AnyCubic line, but not sure if that is too small.
Donald Lovejoy
2022-01-18 14:29:45 +0000 UTCThis has been a huge help for a starting point - I figured I'd start with community settings that people have printed successfully with first - no dice with resin or printer manufacturer community settings, or Lychee community settings (though it is only in beta). Still need to calibrate, but wanted to at least run some preliminary tests before I get it dialed in.
Peanut
2022-01-07 00:24:34 +0000 UTCeveryone should really dial in their printer with an exposure test like the XP2 validation. each resin is different. Siraya fast needs slightly more time per layer (I use 2.4sec(mono screen)) and 2.2 for elegoo standard. however you need more support with elegoo over the siraya to avoid fails, a lot more. your exposure should be dialed in for detail and then you should change your supports or lower lift speed to stop failure. I actually mix 50:50 siraya and elegoo. once you get a resin that works for you you should just keep using it, as each resin can be very different.
Necrodead
2022-01-06 03:02:57 +0000 UTCI had a lot of issues on my Saturn until i upped the exposure times, i thinkn im on about 5 seconds, things just kept failing on small areas like tails etc , touch wood, since no issues :-)
Guy Grundell
2022-01-04 19:03:48 +0000 UTCokay, i have an anycubic photon and with anycubic grey my bottom layers are 25s/ layer and 7s/layer after that, failures happen more than when i had my settings closer to what they show but detail is lost for sure
Daniel McCormick
2022-01-04 13:02:47 +0000 UTCI think you've misunderstood the screenshot. On the monoscreen settings the exposure time is 35 seconds for the bottom layer only,the one that sticks to the build platform. The regular exposure time is 3.5 seconds here,which is what I would recommend for plant based resins or ABS-like resin,such as Siraya tech fast,which they gave as an example. 2.5s exposure time is enough for regular gray resins but anything that's springy needs more time,otherwise the supports will just fail. Also if the resin is black it needs more exposure time due to how colors work. Your 8 second exposure time on mono is actually bit more than 2 times longer than what they're showing here.
Barokai Rein
2022-01-04 04:47:07 +0000 UTCI'm using 2.4 to 2.5 on my Saturn.
Asteroids Fred
2022-01-04 01:10:36 +0000 UTCHoly cow those are some of the longest exposure times I have seen. I use 8s on my mono and everything works perfect.
Anthony Crafter
2022-01-03 19:04:53 +0000 UTC
