Hotfix for CP2077

Just depends on the mod really. I use extra mods from nexus pretty regularly and don't run into many issues. Of course if you are using something that is related to the camera that could cause conflicts or anything that replaces a similar file like dxgi.dll that REAL uses.

Brandon(Post Maester)

how well does this mod work with mods from say the nexus?

Green Rabbit

If you are using 1/3 in the REAL overlay (AER2) then it will lock you to 60 if your headset is set at 90hz. Switch to 1/2 or Legacy. Legacy will give better performance at higher res but will feel less smooth than the other 2 options at lower resolution. With AER2 the GPU has to produce extra frames so carries overhead. Make sure you can maintain solid 60 for 1/3 or 90 for 1/2 for that 120hz feel. I usually use Legacy at 90fps because I prioritize resolution and visuals and the bit of motion jitter doesn't bother me at all. Here is a post explaining about AER2 vs 1. https://www.patreon.com/posts/gaming-in-vr-at-76076877

Brandon(Post Maester)

I cant tell what my FPS are in game right now but for some reason the in game benchmark is locked at 60fps...any ideas?

Matthew Kinsey

Yes, gog client last patch and last mod.

Giulio Pompili

Have you solved it? I have the same problem... I can't see the RealVR menu when I launch Cyberpunk and I only see the game in 2D

Javier García

hi, I've been trying to get ROSS's mod to work in my system for 2 days but with the latest mod 9.6.2 the game starts but I can't enter VR mode only 2D screen while with an old version 5.02 the game enters without problems in VRMODE I attach the two pastebine files to help me solve the problem Thanks NOT WORKING https://pastebin.com/waWD6kWy WORKING https://pastebin.com/2RY8nzHp

Giulio Pompili

It is cyberpunk I am going to put the new version of the mod haber and if it continues to give problems I will make a youtube video and you solve my doubts or the problem because I would love to be able to play the game in vr that I have reserved it for it thanks

Manuel Anta Rodriguez

Sorry I missed this, I can't remember if you have already said what game/s you are trying to play. Did I already get a copy of your RealVR64.log file? If not please put it on pastebin and post the link here so I can take a look.

Brandon(Post Maester)

have not answered because I have been away but I have not been able to make it work well I have installed the mod as it says in the video below and nothing is working well and suddenly the image crashes and takes me out of the game and the performance goes Everything is fine, it's as if there was a buck when I take things or go through some areas and there is not a day that I play for more than 15 minutes without it going to hell

Manuel Anta Rodriguez

Since he didn't reply I was guessing he must have figured things out to a degree. What's happening with you dude?

Brandon(Post Maester)

have u gotten it to work yet? im gettin fuckin pissed too

I already give up I have tried to play this mod many times and I only manage to get angry when everything seems to work well the errors start that throw me out of the game without further ado

Manuel Anta Rodriguez

Awesome, glad its working for you!

Brandon(Post Maester)

NEVERMIND I WAS USING A PREVIOUS VERSION 8.3, OR 9.1, BUT WHEN I INSTALLED THIS VERSION IT STARTED WORKING. THANKS.

david findley

I tried it yesterday and it was completely locked for me even when turning my body/head around. What headset are you using and how is it connected to your PC? I don't remember it being any different with my Q2 or Pico though(Used G2). Not sure if there are any settings in game that would alter that. You did not uncheck the headlock option in the REAL overlay right?

Brandon(Post Maester)

Hi, the HUD is not following at all. It's completely fixed in it's position.

bpatchesnet

The HUD should be headlocked by default but perhaps not to that degree. There is actually an option to unlock the HUD from your head in the overlay. So I guess the answer is probably no but I am not sure as I haven't tried moving around to that degree. Is the HUD just not following you at all?

Brandon(Post Maester)

Is it possible to headlock the hud. I want to turn with my head/body and not with the controller stick. Is this possible?

bpatchesnet

You just choose DLSS Quality as usual. Feel free to try out other versions but one giant way to tell is to aim with a gun and you will be able to see how much haloing there is around your characters hands. I don't much of anything with 2.5.1 compared to any of the other latest versions. Of course that is at higher resolutions.

Brandon(Post Maester)

I forgot to ask you : how to enable DLSS 2.5.1 ? Ive downloaded it ,installed it on cyberpunk bin, 64 folder , replaced original file, but how to know the new one is working ? Do i just choose DLSS quality option on graphics settings ? Or it’s located on VR overlay at the launch of the game ?

Fingras

Woops I thought I used reply button ,sorry thanks for your answer!

Fingras

If you are at a point where it looks good for you, then just enjoy the game! :) Also please use the reply button to keep things organized.

Brandon(Post Maester)

Ive not try dlss 2.5.1 yet, ive read some comments saying it worst for some people, and im affraid to test it because of settings changes and not get my first config again..I had a lot of time on it to reach a great rending. Its frustrating because im affraid to test new config ,but in same time im really curious because this DLSS can bring me better results..And MONO mod is a kind of « Old VR » for me… Just a 360 degreepoint of view with no 3D effect… like 360 videos on Youtube, no 3D for me means no real VR.

Fingras

Haloing is a product of AER and TAA so as long as TAA is in the mix somewhere you will have some haloing. DLSS TAA is not the same implementation as the regular game TAA so it could be better or worse depending on the game and DLSS version. For Cyberpunk DLSS 2.5.1 seems to have the least amount of haloing on Quality out of the newer versions (still have not tried 3.1.1 v3) Higher resolution will mitigate haloing and aliasing to some degree. You will have to experiment depending on the game. There is also the option of increasing world scale but it will make things larger of course. You will also loose depth the higher you go. I wouldn't recommend going past 2x as if you are going higher to get rid of haloing it probably makes more sense just to play in Mono. Resolution will have the biggest impact so turning down settings or using performance mods from Nexus or anything of that nature, also DLSS, to get to get up to around the 2700-3000 resolution mark is worth a shot.

Brandon(Post Maester)

I turned almost everything ip on high in my 3080 and one thing continue to disturb me:Aliasing and haloing.. (Aliasing is much more present when I turn Dlss On, but a have more haloing when Dlss is off... I think I can't have both...)

Fingras

It will work better comparatively I guess, but it just looks better overall even if I lower the resolution a couple steps. It looks around the same as it did before they messed things up further in a previous update and back then I had a 3080ti (still a high end card I know) but I could still get things looking pretty decent. The major difference now is that I can also turn almost everything up to high as well :) DLSS 3 does not look as good even on a 4090 for instance. At least 3.1.1 and 3.1.1 v2. But of course if you have the ability to pick up extra shifts for a month or two(that is what I did) and grab a 4090, the experience will be that much better.

Brandon(Post Maester)

I think it works really well for Brandon because hes using a 4090 card lol Everything should be working really well if you can afford it ;)

Chet

https://www.techpowerup.com/download/nvidia-dlss-dll/ The link above has versions of dlss that you can download and then replace manually in the game folder. I think Cyberpunk has the file where the games .exe is, the same place you put the mod files. You can also look up DLSS Swapper if you want to download software that allows you to swap out DLSS versions in your games easily but you have to manually download their certificate so at your own risk, It works really well and I haven't had any issues though.

Brandon(Post Maester)

I can’t find on graphics options of the game DLSS 2.5.1… But ive found like some guys said here, once DLSS is completely off ,haloing on characters almost disappears… And i can’t see a really big diffrence on textures and general rendering when DLSS is on quality.. (except haloing much more present with DLSS on !)

Fingras

OOOH, disable the extra facial lighting in the settings. That should hopefully take care of the "bloom" around the characters. Are you using DLSS 2.5.1? It seems to be the best so far at mitigating haloing and ghosting.

Brandon(Post Maester)

Ive already put DLSS on quality, I follow steps on YouTube ´s configs for VR mod to have decents results and it was ! but For example , ive had a lot more haloing before install disable bloom mod , (in hogwarts legacy , theres much more haloing for sure ..hope to find solution on nexusmod one day..)its okay now on CP77 but still present ,when I talk to characters , i can still clearly see haloing around them,but its disapears when I move to see characters from another angle.. Just asked because I was wondering if some people have graphics issues even on RTX 4090, or a very very clear rendering..

Fingras

If you disabled TAA then you are bound to have quite a bit more aliasing. If you have indeed disabled TAA then you should not have haloing around objects with AER 1. Mono is the closest to looking as clean as it would in 2d but that is because it is 2d but you are still looking at textures and things far closer than they were designed to be looked at so there will always be some issues when comparing to playing flat screen however minor. Definitely try using DLSS 2.5.1 or higher on Quality, as the haloing should not look that bad around 3000 resolution. You can try increasing the world scale to 2 to lessen the haloing more but it will make things larger up close the further you go up and also you are moving towards monoscopic the higher you go.

Brandon(Post Maester)

hi guys, just asking to be sure :On Cyberpunk, I always have a little bit of aliasing and clipping on environments when I turn my head and haloing around objects, Ive already installed the « disable bloom and taa » mod ,playing on RTx 3080ti and I would like to be sure not to have made mistake somewhere and if normally, this mod should be almost clean as the 2d version with my configuration. Thks a lot guys!

Fingras

hi，Is there any way to solve? thank you

huang yu

Hopefully soon! I kind of caused a bit of a delay by encouraging him to try and add in some additional feedback features that he was thinking of implementing since that would be the best game to get feedback on the feedback :)

Brandon(Post Maester)

Any update on AER 2 for Cyberpunk?

Lgb160

yes,I make sure Steam Theater is disabled for each game。Also i make sure i close any type of software/overlay like Vorpx, Riva tuner, SteamVR or anything that is not a normal windows process other than Virtual Desktop or the Oculus software you have to run to have the headset active. AND I are putting all the files in the REAL folder into Cyberpunk2077/bin/x64 and then running the .config file after I have run the game normally once first correct. I i uninstall the Vorpx software。BUT Operating properly according to you the above steps,（CP2077，ELDEN，STRAY ,Hogwarts Legacy）these GAME do not enter the VR.

huang yu

Just make sure Vorpx is not running at all when you launch the game. It seems like the mod is not picking up your headset or runtime for some reason so most likely some software or overlay is conflicting with it or getting in the way. Did you make sure Steam Theater is disabled for each game? Also make sure you close any type of software/overlay like Vorpx, Riva tuner, SteamVR or anything that is not a normal windows process other than Virtual Desktop or the Oculus software you have to run to have the headset active. Thank you for using pastebin, you don't have to keep posting the same log files though, I got them :) I also emailed luke the log file and asked if he has any specific idea why you are not getting log files for other games. Just to confirm for sure, you are putting all the files in the REAL folder into Cyberpunk2077/bin/x64 and then running the .config file after you have run the game normally once first correct?

Brandon(Post Maester)

https://pastebin.com/zDKZihAh

huang yu

I only get a RealVR64.log file for the only game Ghostwire Tokyo installing the 7.2.0 和9.3.3 mod。 but my pc Don't enter vr ,and launch the game my Computer popup window ,prompt UE4-Mainegame has crash / FATAL ERROR。 After installing the 7.2.0 /9.31/9.3.3/9.4.4 mod ，Launch Other game didn't produce this RealVR64.log file , but other game can launch on my computer game, just do not enter the VR。 I use Other vrmods （praydog mods（re2-3-7-8））and vr game has been properly into the VR。 BUT for LUK MODS my pc Don't enter vr。Before My PC install and Normal used vorpX software。Two software have a conflict？Now My computer need to uninstall vorpX software？ What shall I do?

huang yu

THank you! I sure not running SteamVR before i launch the game.i do run any additional software like SteamVR. and my Quest 2 show that it is connected to my pc before you run the game.

huang yu

I want to make an animated gamemode. Lucas developer's mod is so good that many people want it to be known, and anime games have so many fan bases that if you make a mod, it will be very popular. Most people who play games play a lot of anime games, so many people make it want to Currently, they are satisfied with a 1-minute YouTube VR video.

Jay

Are you recommending that he make a mod for just an anime game in general or you got a specific one in mind?

Brandon(Post Maester)

Again, it is not registering your GPU/headset or runtime which is super odd. Are you sure you are not running SteamVR before you launch the game? Connect your headset to your pc with Virtual Desktop or Air Link and do run any additional software like SteamVR. Make sure you have disabled Steam Theater just in case. Then, launch the game from your steam library just like you were going to play flat. Also, again, please do not post the whole log file just a link to it from pastebin.com or google drive or something like that. Does your Quest 2 show that it is connected to your pc before you run the game?

Brandon(Post Maester)

thank you. I want you to make another vr mode. Lucas Mode is so immersive. But I'm sorry I don't know how long the development period is, so I can't tell you. 1. I would like to recommend an anime-related game.

Jay

06:46:35:001 [22272] | INFO | Initializing R.E.A.L. VR by LukeRoss, version '9.3.3.11320' (64-bit) built on '2023-02-03 23:05:53' loaded from "I:\SteamLibrary\steamapps\common\tkvr\Ghostwire Tokyo\Snowfall\Binaries\Win64\dxgi.dll" into "I:\SteamLibrary\steamapps\common\tkvr\Ghostwire Tokyo\Snowfall\Binaries\Win64\GWT.exe" ... 06:46:35:115 [MAIN ] | INFO | (Kudos to crosire for creating his awesome ReShade injector.) 06:46:35:158 [MAIN ] | INFO | Registering hooks for "user32.dll" ... 06:46:35:187 [MAIN ] | INFO | > Libraries loaded. 06:46:35:211 [MAIN ] | INFO | > Found 19 match(es). Installing ... 06:46:35:252 [MAIN ] | INFO | Registering hooks for "ws2_32.dll" ... 06:46:35:283 [MAIN ] | INFO | > Libraries loaded. 06:46:35:284 [MAIN ] | INFO | > Found 8 match(es). Installing ... 06:46:35:300 [MAIN ] | INFO | Registering hooks for "C:\Windows\system32\d2d1.dll" ... 06:46:35:323 [MAIN ] | INFO | > Delayed. 06:46:35:323 [MAIN ] | INFO | Registering hooks for "C:\Windows\system32\d3d9.dll" ... 06:46:35:324 [MAIN ] | INFO | > Libraries loaded. 06:46:35:324 [MAIN ] | INFO | > Found 9 match(es). Installing ... 06:46:35:343 [MAIN ] | INFO | Registering hooks for "C:\Windows\system32\d3d10.dll" ... 06:46:35:345 [MAIN ] | INFO | > Delayed. 06:46:35:346 [MAIN ] | INFO | Registering hooks for "C:\Windows\system32\d3d10_1.dll" ... 06:46:35:346 [MAIN ] | INFO | > Delayed. 06:46:35:347 [MAIN ] | INFO | Registering hooks for "C:\Windows\system32\d3d11.dll" ... 06:46:35:347 [MAIN ] | INFO | > Libraries loaded. 06:46:35:348 [MAIN ] | INFO | > Found 2 match(es). Installing ... 06:46:35:365 [MAIN ] | INFO | Registering hooks for "C:\Windows\system32\d3d12.dll" ... 06:46:35:367 [MAIN ] | INFO | > Libraries loaded. 06:46:35:368 [MAIN ] | INFO | > Found 7 match(es). Installing ... 06:46:35:383 [MAIN ] | INFO | Registering hooks for "C:\Windows\system32\dxgi.dll" ... 06:46:35:400 [MAIN ] | INFO | > Delayed until first call to an exported function. 06:46:35:401 [MAIN ] | INFO | Registering hooks for "C:\Windows\system32\opengl32.dll" ... 06:46:35:401 [MAIN ] | INFO | > Libraries loaded. 06:46:35:402 [MAIN ] | INFO | > Found 360 match(es). Installing ... 06:46:35:424 [MAIN ] | INFO | Registering hooks for "bink2w64.dll" ... 06:46:35:445 [MAIN ] | INFO | > Delayed. 06:46:35:446 [MAIN ] | INFO | Registering hooks for "XInput9_1_0.dll" ... 06:46:35:446 [MAIN ] | INFO | > Delayed. 06:46:35:446 [MAIN ] | INFO | Registering hooks for "kernel32.dll" ... 06:46:35:446 [MAIN ] | INFO | > Libraries loaded. 06:46:35:447 [MAIN ] | INFO | > Found 5 match(es). Installing ... 06:46:35:465 [MAIN ] | INFO | Registering hooks for "steam_api64.dll" ... 06:46:35:468 [MAIN ] | INFO | > Libraries loaded. 06:46:35:468 [MAIN ] | INFO | > Found 4 match(es). Installing ... 06:46:35:485 [MAIN ] | INFO | Registering hooks for "Hid.dll" ... 06:46:35:501 [MAIN ] | INFO | > Libraries loaded. 06:46:35:501 [MAIN ] | INFO | > Found 9 match(es). Installing ... 06:46:35:623 [MAIN ] | INFO | 13 RVR patch(es) applied successfully in 110 ms. 06:46:35:638 [MAIN ] | INFO | Initialized. 06:46:35:638 [MAIN ] | INFO | Exiting ... 06:46:35:939 [MAIN ] | INFO | Uninstalling 427 hook(s) ... 06:46:37:011 [MAIN ] | INFO | Finished exiting.

huang yu

the game launch normal in Steam ，but Don't enter VR。Same goes forairlink/link and vd ， game in the PC running Windows mode，Don't enter vr。I do not get a RealVR64.log file for Most of the game（CP2077，ELDEN，STRAY）after installing the 9.31-9.3.3-9.4.4 mod。 BUT i get a RealVR64.log file for Ghostwire Tokyo installing the 7.2.0 和9.3.3 mod，pc Don't enter vr and prompt UE4-Mainegame has crash ， FATAL ERROR。

huang yu

OK, it looks like you are installing the mod files to the correct folder Cyberpunk2077/bin/x64 from the config file so what happens exactly when you try to launch the game from your Steam library? Does the game launch? Do you get an error of some kind? And you do not get a RealVR64.log file for any of the games after installing the mod?

Brandon(Post Maester)

my pc GPU driver Has been updated to the latest（NVIDIA RTX2060 is 528.49）。my SteamVR Installed correctly。 use Other vrmods （praydog mods（re2-3-7-8））and vr game has been properly into the VR。 my pc V-Sync Shut down . but the 6.0-8.4-9.31-9.3.3-9.4.4 mods Software all Can not be into the VR。What shall I do? I was devastated。tk!

huang yu

my headset is quest2。airlink/link/VD All these I used，but 9.3.1-9.4.4 Software Can not be into the VR。AND other games(Elden Ring,Dark Souls Remastered,Stray) use the 9.3.1-9.4.4 mod Will not enter the VR or so。 BUT i used praydog mods（re2-3-7-8） Can enter the VR。MY Computer graphics model IS NVIDIA RTX2060。What shall I do? I was devastated。

huang yu

If you are asking if you can recommend a game to mod, then yes, you can always do so. Of course there is never any guarantee that it will even be seriously considered but you are always welcome to throw them out there.

Brandon(Post Maester)

I would like to recommend an additional vr game mode to the developer, but I can't talk about it because there are too many games out right now.

Jay

It looks like the config file is installing so you should have a log file in the same folder as the config file. Is your GPU driver up to date? You do have SteamVR installed correct? The V-Sync thing is not the issue it is something else.

Brandon(Post Maester)

How are u linking your headset to your pc? Have u tried other games and see whether the mod works?

Wilson Ng

I deleting the entire game folder and starting fresh。The results are the RealVR64 .log file no in there or so。AND my pc v-sync is Shut down for all the VR mods。 But Software Can not be into the VR or so。MY Computer graphics model IS NVIDIA RTX2060。What shall I do? I was devastated。 thank you！

huang yu

my pc v-sync is Shut down for all the VR mods。but 9.31-9.3.3-9.4.4 Software all Can not be into the VR。 What shall I do?

huang yu

v-sync should be off for all the VR mods so it is not a bug.

Wilson Ng

It looks like the mod is installing so you should have the .log file in there. If you do not then something is up. I would try deleting the entire game folder and starting fresh.

Brandon(Post Maester)

I'm sorry, I am not getting what you are trying to say. Are you trying to add in a mod for higher resolution textures or something like that?

Brandon(Post Maester)

There seems to be a problem with the cyberpunk material. I want to add it, but there is a vr mod, but the game is so full that the developer will have a hard time too, right?

Jay

RealConfig.bat in PC prompt NVIDIA V-Sync bug。 What shall I do? Fixing folder permissions... 已成功处理 136 个文件; 处理 0 个文件时失败 Working around NVIDIA V-Sync bug... WARNING: A new profile backup will NOT be made because one already exists in the RealRepo folder. Forcing V-Sync to Off for application "K:\SteamLibrary\steamapps\common\Cyberpunk 2077\bin\x64\Cyberpunk2077.exe"... V-Sync is already forced off for this application/profile Success! Installing graphics settings preset... Copying game specific files... 已复制 1 个文件。 Cleaning up... All done!

huang yu

RealVR64.log Cyber​​punk/bin/x64 can't search。

huang yu

Of course there is also Air Link which worked fine for me as well. Wireless play will depend on your Router though with either software. Helps to have a good wifi 6 router and even a dedicated one just for your headset beyond that.

Brandon(Post Maester)

Should be in the same folder where you put the mod files. Cyberpunk/bin/x64 where the games .exe file is located. Make sure you are not starting SteamVR before starting the game and also disable steam theater in the games steam settings.

Brandon(Post Maester)

RealVR64.log 2077 folder can't search, where to find?

huang yu

MY PC IS NVIDIA RTX2060. PC prompt NVIDIA V-Sync bug, 9.3.3-9.4.4 Software Can not be into the VR. What shall I do?

huang yu

Is it not entering VR for you? Don't worry about the Vsync thing, the mod is just turning it off for the game so it does not cause issues. If it is not going into VR that is most likely something else. can you put your RealVR64.log file on pastebin.com and then post the link to it here? I'll take a look. Just reply here for now unless a couple days go by and I don't reply back.

Brandon(Post Maester)

IT is 9.3.1-9.3.3-9.4.4. MY PC IS NVIDIA RTX2060. PC prompt NVIDIA V-Sync bug, Software Can not be into the VR. What shall I do?

huang yu

The latest Cyberpunk version is 9.3.3 included in this post up top. If you already have VD, give it a shot. I have not used Oculus Link in ages but VD worked pretty well when I used it with my quest 2 while comparing against my Pico 4.

Brandon(Post Maester)

vr mod has been applied. However, when I operate the game, it does not start into the vr world, but into the normal display. The cyberpunk version I used is the latest version 1.6. Should I use Virtual Desktop instead of Oculus Link? I'm enjoying playing Final Fantasy 7 last time because you gave me advice. ^^

Jay

The latest version 9.4.4 works for me in VR fine but there is no real reason to update past 9.3.3 from this post. Use 9.3.3 and make sure to run the .config file, also make sure you have run the game flat first if you are just starting out. Make sure you don't start SteamVr first or any additional software really, just run the game from your library as if you were playing flat. If you still have issues, please put your RealVR64.log file on pastebin.com and post the link here and I will take a look.

Brandon(Post Maester)

2077 v1.6 The latest version does not apply cyberpunk vr mode?

Jay

NVIDIA /NVIDIA RTX2060 doesn't use IT？

huang yu

Fixing folder permissions... 已成功处理 136 个文件; 处理 0 个文件时失败 Working around NVIDIA V-Sync bug... WARNING: A new profile backup will NOT be made because one already exists in the RealRepo folder. Forcing V-Sync to Off for application "K:\SteamLibrary\steamapps\common\Cyberpunk 2077\bin\x64\Cyberpunk2077.exe"... V-Sync is already forced off for this application/profile Success! Installing graphics settings preset... Copying game specific files... 已复制 1 个文件。 Cleaning up... All done! 请按任意键继续. . .

huang yu

Which version did you install ?

Bramma Bull

Ugh I replaced all the files but I cant launch it in vr anymore

Adrian Vargas

Hi Corvid, we are talking Cyberpunk? There is the option of using force 2d screen in the Real overlay. You can also just change dxgi.dll to dxgi_bak.dll to disable the mod and then change back when you are done with that part of the game. You could possibly be hitting VRAM issues, could try lowering some related settings.

Brandon(Post Maester)

currently cant progress past the meat factory level in the prologue due to crashing every time i go into the first room full of enemies. My game crashed a few times at random before but would eventually work past it but now it consistently crashes. Is there a way to fix this? I have an AMD RX5700 so its not the DLSS setting as i cant even enable it, everything is up to date, game is unplayable since its a required mission and i'm locked in the building. ;v;

Corvid Confidential

hey, I cannot find 9.3.2 , where can I get it?

Johnny

That has been a bug that happens sometimes off and on for a while. If you adjust the pdd slightly in the overlay or the resolution or DLSS or anything that restarts VR like that it should go away for a while. Sometimes even going into the map and back out has fixed it for some people. Also updating to DLSS 2.5.1 may possibly help (most likely not though) as it has less of that double haloing happening on Quality mode. At least it should look better though :)

Brandon(Post Maester)

Hey so quick question. Been having this problem since before the update and I'm still having it now, but whenever I get into combat/looting the whole hud starts jittering like it's flipping between my eyes. From my brief search through other posts it seems like it's Q17 from the troubleshooting post but updating to the most recent drivers didn't fix it. Anyone know of a fix? I'm on an HP Reverb G2 if that helps.

Baef

What game are we talking about? Also try checking your Nvidia control panel settings?

Brandon(Post Maester)

I cant increase the resolution beyond my monitor size. i have srt it to windowed, and when i go to adapt resolution, it will go up to my monitor resolution, but no farther. It is obviously doing it behind the scenes though, because if i set the ppd to max ill get an error that my gpu is out of memory. but otherwise, no matter how high the ppd i set it just sticks to my monitor resolution as the vr resolution. tried every variety of settings in the game, nothing seems to help. Anyone know where I'm going wrong?

ryan sil

This is extremely promising. It looks really fantastic in VR. I'm hoping HL drops a really clean optimization patch so it runs better, and then I think it'll work great with this mod. Only thing I really noticed that was weird was there's this transparent "forcefield" around the characters and some objects that move. One game I'd love to see on here is Mirror's Edge. I think that'd be wild in VR

Greg Sanford

Works really well for me on a 4090 and Pico with the latest Pico software. Are you using Virtual Desktop?

Brandon(Post Maester)

What gpu are you using? The first thing would probably be to lower the resolution or settings some to see if that alleviates the issue.

Brandon(Post Maester)

Try going back whatever version you were using. I would recommend not updating every time unless it actually adds something to the game you are updating. Did you run the config file again after updating?

Brandon(Post Maester)

I jam using the Pico 4 & I notice Jittering when moving my head around even though i am maxing out at 90fps, settings on medium, anyone experiencing this as well on the Real v9.3.2 ? ( I have a 4090-i9-1300kf)

Bramma Bull

Make sure motion blur is disabled or it won't matter what graphics settings you use.

Bon Franklin

Are you adjusting the PPD slider in the mod overlay? I have a 4090 and 5800x and I can play at 24ppd at around 80-90 fps in most places, I have no RT on and mostly high settings, medium population and a couple other things.

Brandon(Post Maester)

Hi guys, im wondering about the bad graphics and low FPS, o get only like 60-70 fps, even tho my GPU uses only 40-50% (RTX 4090) and cpu 50-60% (i5-13600K). Is there a setting or other way to get better graphics and higher FPS? Im pretty sure the graphics aint what it should be after watching many videos of this mod.

Alex Alhoranta

Try rolling back to REAL v9.3.2 and see if you will experience crashing. Mine would crash at launching the game when using version Realv9.3.3

Bramma Bull

You can simply rollback to REAL v9.3.2 and see if you will experience crashing

Bramma Bull

Same problem for me, I crash every 10-15 minutes with this version...

Olivier Therrien

I'm also getting frequent crashes now with this version

Tarun Charaipotra

im having an issue where randomly my gpu spikes to 100% utilisation on task manager and the game crashes, is there any solution to this problem?

dysmal

On 9.4.3 the sound is stuttering for some reason exact same settings as previous version

Budgie and Aviary Birds

No, unfortunately not :(

Brandon(Post Maester)

I feel exactly the same, I bought the game and subscribed for 2077 and I do not touch it anymore as for the other games I just don't have them and not interested buying them.

Nigaud loto

Thank you for the fix but I still get blurry/double vision all the time. FPS is okay with med resolution on my 3070Ti and 16Gb RAM. I have to say that, unfortunately, I installed the mod for the first time AFTER installing the new update of the game for GTX4000 series that caused the mod to crash. So I do not really know how the game originally looked in VR before the update... I am really looking forward for a more solid fix to this problem in the future. In any case, otsukaresama desu (thank you for your hard work)

Antonio Sanchez

Hello Sascha, If you put your RealVR64.log file on Pastebin and post the link here I will take a look :) Make sure you have renamed the sl.interposer.dll file in the game folder where the mod files are located.

Brandon(Post Maester)

I'm immediatly crashing coming into the menus. I can't even get to the config screens or load a game. This will freeze the whole PC. Sometimes it flatlines Cyberpunk after a couple of minutes or I have to reboot the whole computer. Anyone else ecountering the same problem ?

Sascha Simon

Im pretty sure I did everything correctly I copied all the files in the unzipped folder to my game folder all the ones outside the cp2077 folder except for files in other game folders and all the files inside the cp2077 folder im not sure how to fix

Daniel McKinney

Im getting ERROR: Mod installation files not found. When unzipping the mod archive, please make sure to overwrite existing files and to use folder names (preserve the zip folder structure). Aborting RealConfig

Daniel McKinney

Is there a way to configure R.E.A.L. so that CET is injected earlier in the rendering chain and will show up VR?

Nicholas Hart

You have to change the location of the menu on the screen, there are instructions in one of the Cyberpunk posts but I don't remember which one :( Found it :) https://www.patreon.com/posts/cyberpunk-2077-68015541

Brandon(Post Maester)

Does anyone know a way to view Cyber Engine Tweaks or any other mod menu while in HMD rather than having to look at my monitor?

Nicholas Hart

I am not familiar with Varjo are you running any additional tools/software/overlays that could be interfering with performance? That is always a good first place to start, make sure you have only the game and necessary VR software running and close everything else you can. Also make sure you are actually getting 90fps in the Real overlay. What rendering mode are you using? 1/2? Legacy?

Brandon(Post Maester)

I just installed the VR MOD for the first time and for some reason I am getting very choppy head movement even at 90fps, it really breaks the immersion. Any ideas about what is causing this? I am running an RTX 4090 and a Varjo Aero headset if that helps.

Naack

Are you playing Cyberpunk? I would also recommend going to a previous version of the mod to see if that helps. Are you just getting crashes after using the new version? In general if things are working well, I would not upgrade versions unless it actually adds something to the game you are playing.

Brandon(Post Maester)

You can simply roll back to Real Mod v9.3.2. Until luke comes out with a fix for the crashes

Bramma Bull

You may be putting the mod files in the main cyberpunk folder. Instead put in the same folder as the executable. If your on steam its going to be something like D:\SteamLibrary\steamapps\common\Cyberpunk 2077\bin\x64. If you not on steam then go to the main folder and drill down to \bin\x64. Put the mod files in that folder and run RealConfig.bat from there.

Natasha Owens

every 5 mins

roger diking

i am constantly crashing with a 4080 smh i cant go thru 5 mins with out a random crash. before this one i never had any crashing before.

roger diking

Anyone else getting a ton of crashes on this? possibly me as just reinstalled entire pc.

Natasha Owens

'Mod installation files not found' is all I get on Windows11. I just straight extracted it to my cyberpunk game folder as requested, not sure what else I can do.

Lem Miller

You mean looking around? Aiming is gaze based. Not that I am aware of.

Brandon(Post Maester)

Good morning; It is possible to unlock the "up down" axis of the joystick for aiming? THANKS :)

Gost Sn

There should be an option in the overlay for OBS capture.

Brandon(Post Maester)

Hi! So far enjoying the mod, but when I want to capture anything I've played, the image looks jittery alternating between 2 images. How can I record just one without the jittering? Thx

miko

What game are we talking? AMD should ideally work but is more problematic with the mods. Is the game not running at all in VR?

Brandon(Post Maester)

Does this work for AMD CPU(Ryzen 7 3700X)/GPU(Radeon RX 570)? During the config setup I got a message that it was skipping the NVIDIA config step because I don't have it but when I try to boot the game I'm getting errors related to it not being able to find the NVIDIA driver before it crashes ("CUDA not available", "NVIDIA driver not detected"). I am using Quest 2 via Virtual Desktop and SteamVR.

Trumpet Wom'

Was just thinking the same haha.

Jason Spencer

Hope to see a VR mod for Hogwarts legacy Luke 👀🙏🏼

Robbie Turner

I would definitely play it. No, no hints for the next game yet.

Brandon(Post Maester)

This mod is amazing. Thank you!

Jason Spencer

I just wanted to no has there been any hints to the next game luke ross is going to make into vr ?? I would love to see uncharted 4 in vr ! Would be awesome.

McFlyVR85

Did you check max frame rate in Nvidia control settings? Seems like something is limiting your fps somewhere in your system settings, runtime settings or the game settings. Is your monitor 60hz? Also, please use the reply button to keep things organized.

Brandon(Post Maester)

I tried everything I could. The settings I have tried so far---> Vsync was already off in my Nvidia control panel before i tested with anyting. I tested DLSS & Resolution scaling both on Low--High settings on multiple resolutions on the video option in-game. Using oculus Quest 2 in iits standard resolution ( No modification with Sidequest) & at 90hz through the oculus PC app. Ray-tracing, Screen space reflections was completely off. Though adjusting all these settings from off to maximum, I can only cap at 60fps sadly. I have no idea what else to try.

Bramma Bull

I appriciate both you gentlemen for the help. I will follow these instructions now and see if they can help!!

Bramma Bull

on a reverb g2 set at 90 hz and a 4090 you can try using my settings , 1st part of the video is monocular and after when the screen keeps flickering it is in stereoscopic 3D at 19:50 you can find the settings everything on high and at 23: 18 you can see what dll settings and what of the 4 options below the fov are activated, as you can see I can play at almost 90 fps all time. https://www.youtube.com/watch?v=VsbJOsPTD6g

Nigaud loto

I am using the oculus Quest 2 as my headset. I also Used Oculusquest to maximize my resolution to 2048x1080 between 90-120hz, and i am using a 4090 card & I am locked at 60fps. I have No idea how I can raise it to 90fps, i have tried different settings between low-High & not much changes with my framerate (40-60fps) i have also experience motion jitter when strafing for sure & ideas on increasing Frame rate ?

Bramma Bull

It kind of depends on how sensitive you are to it but try to aim for 90fps and then you should only have some slight motion jitter when strafing but not when things are moving in general. Yes, the game is running at half of those frames or 36fps per eye for you. I just avoid RT and play at the highest res at solid 90fps with the other settings on high. No screen space reflections though as they are too grainy unless on psycho and then too much of a fps hit. If you really want some RT reflections, just turn down other settings and the res but still try for 90fps. Until AER2 makes it way to Cyberpunk, then you should be able to push more settings if you want and play at 60(hopefully).

Brandon(Post Maester)

I just though thats how the mod was? Im using a 4080 and get a locked 72fps but then moving it seems like the fps is half or something and everything looks really jaggy at the second highest res ? 3600 or something.

Budgie and Aviary Birds

what kind of fps are you getting? Is it when things are in motion at all or just when you are strafing?

Brandon(Post Maester)

what kind of fps are you getting? Is it when things are in motion at all or just when you are strafing?

Brandon(Post Maester)

For some odd reason, I too experience the very same thing. I am also using a 4090 Card

Bramma Bull

I just wish i could get mine running smooth. Still have extreme jitter/doubling of all edges when in motion, even on 4090. Guess ill just be waiting for AER 2.0 to hit 2077

Seraphim Elegy

Yes, hold X button and push either bumper to move left or right.

Brandon(Post Maester)

Using an Xbox Controller, I can acces the REAL menu by pressing the 'Start' button, and then pressing both left and right trigger. Is it possible to access the REAL menu tabs with the xbox controller (currently, I have to use a keyboard and mouse to do it)?

Collin Drennen

getting it to first person is hard to achive i guess but this horror in vr would be second to none. even in 3rd person

LassMiRanda DennSieWillJa

It actually looks better for me on DLSS Quality. Less ghosting overall especially distant 2d textures. A lot less haloing around objects, NPCs and more noticeably Vs hands and guns.

Brandon(Post Maester)

Slowly playing through when I have time, would be super intense in VR! Looks and plays great.

Brandon(Post Maester)

Dont worry Luke, Dead Space Remake in VR .will do just fine with AERv2.-) The only VR MOD we´re waiting for right now.

LassMiRanda DennSieWillJa

hi, can anyone tell me what cyberpunk looked like before and after nvidia's update ? Was there that much ghosting while straffing and smooth rotation or not ? I bought the game and subscribed on february 1st and I really would like to know if what I see and really dislike was actually already there ? Thanks.(I run the game on a 4090)

Nigaud loto

Since it does not add anything new, there should be no reason to update the mod if you are not updating the game. I would wait for AER2 to come to Cyberpunk or an actual Cyberpunk update you find worth updating for. I will say the new DLSS implementation is definitely an improvement though. I don't think it has been tested though, let me know if you try it. In theory you should just be able to go back to the previous mod version if it doesn't work.

Brandon(Post Maester)

will this still work with the previous version ? Im on GOG where updates arent forced & I choose not to update yet.

drowhunter

As a matter of conventions, perhaps we could consider for displays and discussions: rFPS: Rendered / Real / Raw / Regular iFPS: Inperposed / Interpolated / Injected / Inserted "per eye": whenever refering to the above per eye. 75 hz AER1/3 at "50 rFPS" = 150 iFPS, which is 75 iFPS per eye 90 hz AER1/2 at "90 fFPS" = 180 iFPS, which is 90 iFPS per eye Also we should change the color when the target frame rate is not achieved. i.e. if I only achieve 49 rFPS in the above mode...perhaps it could display as red or orange as in we didn't achieve enough frames to give the interposer the ability to interpolate - then the iFPS is also 49 for that moment in that scenario. (As I understand it, interpolation doesn't occur without sufficient frame rate?)

D S

Under the advanced section of the first tab. There's a drop-down that may default to: 1/2, 1/3, Legacy AER, Mono. 1/2 and 1/3 are AER2 modes

D S

I don't mean to sound like a Noob. I don't know where to find this AER V2 Feature. Can anyone tell me where I can find and apply it ?

Bramma Bull

Yes, 1/2 is essentially whatever you set your headset to run at ideally. So if you set to 90hz you should have 90fps but should feel more like 180fps when playing. 1/3 would be 60fps or 1/3 of that 180 but should still feel more like 180fps when playing.

Brandon(Post Maester)

When Luke or folks in the chat are talking about setting 1/2 or 1/3, is that an AER v2 thing?

Reinaldo De La Paz

Frame generation is still young so let's hope the future will change this. Thanks for fixing the game!

fenderwq

Thank you so much for working hard to keep this amazing VR experience alive! The new version of DLSS after the update looks pretty solid! Way less haloing on Quality and the distant 2d textures like cars are not as ghosty and annoying. Also not as much odd shimmer as the higher quality textures load in when pedestrians and cars get closer. I did the ol world scale trick (up to 2) and the haloing was barely noticeable at all unless I was looking for it.

Brandon(Post Maester)

Will always be a shame that we don't get to play Bioshock in VR. Maybe Infinite some day if the injector extends back to 3 eventually. Or they do a remake in UE 4/5 That does bring up the issue of the injector being shut down the same way Luke was. Lets hope that doesn't happen :(

Brandon(Post Maester)

Make sure your headset is set to 90hz and then 1/2 should be at 90hz as long as your system is capable of getting 90fps at whatever settings you are playing at. While at 1/2 try lowering the res to see if you get an fps increase. Luke does recommend 1/3 as Elden Ring is more CPU intensive and so it is hard to get 90 fps even with a higher end system. 1/3 at 90 should be 60fps in game. Also make sure you leave your GPU some headroom as it is doing extra work with AER2 to insert frames so that is a factor as well.

Brandon(Post Maester)

It already does. I play it through Virtual Desktop with no issues. I'm currently at work but will check my settings when I get home.

FutureStorm

Nice, so you don't miss R* breaking your mods ;)

Cercata

I have a question, when I use 1/2 or 1/3, is the fps shown in the top left corner the actual fps? I find that whether I select 1/2 or 1/3 in eldenring, the result is 60

野盖 常

I also restored the previous version of CP2077 - too bad about DLSS3 - but there is still hope in Optimized AER v2. Spiedrman Remastered rocks with AER v2

Dave80Wro

Is there any perspective of getting Cyberpunk VR to work with pico4 ?

MarBl66

Thanks for the fix! Have to try it after work. Bummer that DLSS3 won't work, that really was my hope to finally pay it in way higher resolution. :( Really thought this will be it.

Hoshi82

:-]

Bramma Bull

It crashed early for me too after applying the new update You aren't alone bro

Bramma Bull

After placing the new mod update. ...the game crashes early into it. I have restart it several times after crashing and it still crashes after about 3 minutes into the game. I have a 3090 rtx game card. and I have reconfig it to the same specs.

Derrick taylor

I can do without dlss3. GoAER2!

D S

Can I do that on steam. How?

Matthew Kinsey

Super appreciate the quick fix and commentary. Cyberpunk VR has really been a great experience and I’m grateful for your continued support despite their recurring breakage.

J S

I agree !! thanks for the Hard work your putting in my friend !!!

Bramma Bull

Thanks for the incredible work!

avi12

I love everything that have acomplished! I'm perfectly content with playability before the update!

Lastprorican

I switched to the previous version of the game to continue to be able to play the in VR. There is no other way I want to play. cyberpunk.

Shanty1992

Ah this makes me sad. I feel like we need to petition to the official cyberpunk devs now. This game with DLSS3 is game-changing and is playable in 6k now. Let us know if we can help in any mass crowd way!

La