Early Release: Raccoon!!
Added 2024-07-26 22:08:31 +0000 UTC***THIS FILE IS NO LONGER INCLUDED FREE WITH SUBSCRIPTION.
Use the 50% OFF discount code if you want to purchase it.
Hey Everyone!
This one has been a popular request for quite a while, so I'm excited to introducing my new Raccoon design! There are a few new features on this model that I hope you like. I've designed a new snap-fit head joint to add to my arsenal. There is a new sliding tail joint that lets you move the Raccoon from a standing position to a sitting position without the tail getting in the way.
Check out a quick Demo Video Here!
Multicolor 3mf included (works in PrusaSlicer and Bambu Studio)! Each 3mf contains two head with slightly different color patterns. I also made a separate 4-Color and 3-Color option.
Cheers!
Matt
Pictured Prints use the following filaments***
(reference the numbered prints in last image of the gallery)
(1) Cookiecad Grey Ombre, Eryone Gray PLA, Bambu Matte Charcoal, Bambu Matte Ivory White
(2) PolyTerra Fossil Grey, Ziro Matte Black, PolyTerra Cotton White
(3) PoyTerra Matte Rainbow, Ziro Dreamy Dusk, iSANMATE Red/Blue, PolyTerra Cotton White
(4) Ziro Sunlit Petal
(5) Ziro Pastel Spectrum
To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post
3D PRINTING SETTINGS:
Head: Snap-Fit to Body. No supports needed.
Body: Print-In-Place. No support needed.
Multicolor 3MF: includes both 3 and 4 color Multicolor 3MF files (compatible with PrusaSlicer and Bambu Studio)
10%-15% Infill.
3 Walls
This should generally scale down to about 60% with full articulation, on a well calibrated printer. Your mileage may vary.
Check out a quick Demo Video Here!
To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post
***Paid Links. As an Amazon Associate I earn from qualifying purchases.
Comments
Sounds like something isn't working quite right. Are you printing with 3 walls? Send me some photos of the failed area and I'll try and help as best as I can (also send details of what printer, slicer, and basic settings you are using)... help@matmiremakes.com
MatMire_Makes
2025-08-16 18:11:31 +0000 UTCI’m new to 3D printing and I chose this as my first real print and it looks so good and so cute but the ball joint on the head immediately split apart when I put it on, is there something I might have missed or did wrong?
Puppehbreath
2025-08-16 01:50:14 +0000 UTCit's the iSANMATE Red/Blue gradient, but it looks like its out of stock so the link is taking me to a random other filament. :(
MatMire_Makes
2025-06-27 05:16:51 +0000 UTCHello! Do you mind sharing the filament used for the eye/nose color on raccoon #3? My apologies if it's one of the ones listed - I didn't see one that looked like the eye color. These are amazing! Love every single print of yours that I have done!
Jessica
2025-06-26 23:46:52 +0000 UTCWould love to see this in a Mini
SubSector3d
2024-11-07 02:33:51 +0000 UTCLove how my little guys turned out!!
Lucy
2024-08-26 23:35:18 +0000 UTCWorks perfect for me on version 2, love it! Can we get this head connection on future stuff?
Laser Tek Creations
2024-08-16 16:40:19 +0000 UTCcant wait for the mini version of this!
Johnny Davila
2024-08-14 22:16:38 +0000 UTCUpdate. Using 2 mm of brim outside only at 0.1 mm distance worked fine and finally the model was printed. Which is awesome. I just found that the head movement is a bit hard. Seems that the head could not fit until the end (could not feel the click this time). So the head moves but very hard.
Luis Albero
2024-08-12 14:25:47 +0000 UTCIm use a P1s and A1 printers
Nicholas Ramales
2024-08-11 03:53:00 +0000 UTCi made a few at 65 body and 65 haeds did not work I also test it with the head size to. at 66 /66.5/67/67.5/68/68.5/68.7/69 did not work can some one tell the size diff here I lose my mind and filament
Nicholas Ramales
2024-08-11 03:52:13 +0000 UTCThis model failed 4 times. The tail tiny joints get of plate after 30-40%. I tried to put glue stick that I never had to use on bambu, but failed again, so now I am trying with brim outside. Maybe the pieces in contact with the bed could be a bit larger from beginning.
Luis Albero
2024-08-07 22:37:34 +0000 UTCi aprove :) and dog and cat
alexandre pilon
2024-08-07 00:29:38 +0000 UTCActually I worked with Matt earlier the week on a revised head socket, and it works really well.
CRAIG HOPKINS
2024-08-03 16:47:12 +0000 UTCPLA is cheap. Don't cut corners. Also when I assemble the head to the body I heat the head joint with a butane torch to soften it just a bit. Makes for easier assembly.
drhodes4601
2024-08-03 04:31:29 +0000 UTCPls do a mini raccoon 😅
Lotus love
2024-07-31 07:42:51 +0000 UTCI love the racoon but had a balljoint failure when I put the head on. I may have gone to light on build as I did 2 walls and 10% rectilinear infill.
CRAIG HOPKINS
2024-07-29 19:26:16 +0000 UTCOMG this is amazing. I even have a trash can printed on my desk for it to go into, As usual thank you for these
Dorinda C
2024-07-28 21:35:35 +0000 UTCHi! Do you think you could email me with some more details about what you mean? Also what printer/slicer/filament you are using. Thanks! help@matmiremakes.com
MatMire_Makes
2024-07-28 17:25:36 +0000 UTCHi, beautiful work as always, but I think there is a small clearance on the headstock and ball joints.
Ondřej Veselý
2024-07-28 15:17:39 +0000 UTC¡¡Es muuuyyyy bonito!! Gracias
Verito Su
2024-07-27 21:44:52 +0000 UTCCannot handle the cuteness
CryptidsAndClover
2024-07-27 21:32:44 +0000 UTCAn armadillo that actually rolls up! Now that would be a treat!!!
Jerazmus
2024-07-27 21:10:01 +0000 UTCSo stinking cute!! Great job!!
Jenny Gillett
2024-07-27 20:30:51 +0000 UTCI need to know how you did that multi color raccoon it’s absolutely stunning
Ashley Fenstermaker
2024-07-27 18:06:02 +0000 UTCLove this now we need Baby ones
Sara Bailey
2024-07-27 12:57:04 +0000 UTCsuper j'attend la version mini avec impatience
ray stephane
2024-07-27 07:42:02 +0000 UTCPedro Pedro Pedro
Herb Veitenhans
2024-07-27 05:26:17 +0000 UTCwelp i cannot wait for the mini
Julie Pehotsky
2024-07-27 03:38:04 +0000 UTChe just widdol guy <3
Julie Pehotsky
2024-07-27 03:37:56 +0000 UTCOH MY GOODNESS HE IS ADORABLE!!!!
Steph
2024-07-27 02:57:54 +0000 UTCOmg Matt!! Finally!! Thank you!! 🦝❤️
Jamie Robinson
2024-07-27 02:36:30 +0000 UTCThat is SOOO cool. Nice work. Will be on printer tonight
K and K
2024-07-27 01:47:03 +0000 UTCThe colors you chose are beautiful! 😍
REN
2024-07-27 01:06:49 +0000 UTCAn armadillo would be really neat!
BMatt
2024-07-26 23:49:16 +0000 UTCI agree with this!! I don’t know how it would be done, but then again, MatMire is basically a wizard, so… 💁♀️
Kristi Pearce
2024-07-26 22:52:19 +0000 UTCI… I can’t… You gave us ferrets, then opossums, now this?!?! Are you reading my mind?? All I need now is an armadillo, and I’ll have all my favorite animals!!! 😭😭 We honestly don’t deserve you, Mat.
Kristi Pearce
2024-07-26 22:50:47 +0000 UTCI love this!
Joyce Carter
2024-07-26 22:46:42 +0000 UTCOnce again, perfect blend of cuteness & realness LOL
Crissy
2024-07-26 22:43:37 +0000 UTCLove it!! Do we get a little trash can for him?! 😆
Bekah Moore
2024-07-26 22:36:21 +0000 UTComg so sinking cute !!!!!
kelley gallagher
2024-07-26 22:26:54 +0000 UTCAhhh I can't stand it, SO cute! I have loved Raccoons since I was little and read little rascal as my first chapter book!
3D Sunbeam
2024-07-26 22:24:56 +0000 UTCOops, forgot to add that part. 60% worked well in testing. Your mileage may vary.
MatMire_Makes
2024-07-26 22:20:23 +0000 UTCTHANK YOU SO MUCH MATT!!!!!!!!!!!!!!!
KG3D
2024-07-26 22:18:58 +0000 UTCWhat's the scale factor for this one?
Cathy Wingrove
2024-07-26 22:18:37 +0000 UTCWonder if we’ll ever get an ostrich or an emu or something like that. The ostrich would be great with the coloring!!
Jerazmus
2024-07-26 22:18:35 +0000 UTCI love it!
Brandon Ryan
2024-07-26 22:17:11 +0000 UTCThis looks fantastic!! Can’t wait for the mini!
Eric J(3DLife)
2024-07-26 22:14:29 +0000 UTCThis is the one I've been waiting for!!
Jenifer Rice
2024-07-26 22:13:17 +0000 UTCOmg! I’m in love 😍
Gosia
2024-07-26 22:13:03 +0000 UTCThis is absolutely adorable! I need one!
Bradley Gilmore
2024-07-26 22:12:31 +0000 UTCA raccoon just came into our backyard as I saw this 😂 lol so excited to print!!
Patricia T.
2024-07-26 22:12:21 +0000 UTCCute little trash panda!! Thanks, Matt!
Gerri Tokar-Hines
2024-07-26 22:12:18 +0000 UTCThis looks awesome 👌
roy webb
2024-07-26 22:12:10 +0000 UTC
