File Updates: Tree Frog Multicolor 3MF & more...
Added 2024-07-09 21:38:02 +0000 UTCHey Everyone,
I have a new exclusive release coming later this week, but before that, I just wanted to let you all know about some recent file updates. The main one being the addition of Multicolor 3MF files for the Tree Frog (v05)!
(*Note, this update is to my original Tree Frog design, NOT the exclusive White's Tree Frog)
I've been trying to go back and add 3MF files to the older models when I get moments of spare time, and this is the latest addition (As previously mentioned... I also recently added them to the Great White and Hammerhead Sharks, as well as the big Ball Python and Rattlesnake). If you look at the model lists in the Hub post, if 3MF files are included, you will now see the (w/3MF) tag to the right of the model's version number. There will be more 3MF files to come, but please be patient as the new designs have to take priority.
-I also recently made a small update to the RoboTortoise (v04). There was a pair of small pre-supports in the head/neck joint that were unintentionally absent from the previous versions. I have added those back in. This may help if you ran into any issues with the heads coming loose during printing.
-I fixed an error with the bonus RoboTortoise Fridge Magnet captive version (v02).
The RoboTortoise and RoboTortoise Magnet updates can be re-downloaded from the Hub post. For the others...
If you own these files from your time as a subscriber, you can get the updates via the MMF file shared access that is sent out at the end of each month. If redeemed, those files can be found HERE.
If you previously purchased these files, you can redownload the latest update from the shop where you bought them.
If you don't own them and want to purchase them, be sure to use the subscriber's 50% OFF coupon code that is listed in the Hub post.
Pictured Print uses the following filaments...***
Ziro Fluorescent Green (it's crazy bright under a black light!), Eryone Matte Aqua Blue, Overture Orange PLA+, Bambu Matte White
***Paid Links. As an Amazon Associate I earn from qualifying purchases.
Comments
There is a PDF document in the download that has the instructions, descriptions of the magnet sizes, and amazon links to some magnets. Basically, 10mm x 3mm and 5mm x 3mm round neodymium magnets should fit.
MatMire_Makes
2025-05-13 17:28:56 +0000 UTCHi! What are the sizes of the magnets for the tree frog 🐸 you created? For his original size. Thanks!
Jose Guerra
2025-05-13 09:42:16 +0000 UTCI would like the update for Tree Frog Multicolor 3MF & more... with the new colors I'm a year patreon subscriber but I click the link and it takes me to myminifactory which I do not have an account can you send me the updated file. Thanks
Stephen
2024-09-04 21:16:54 +0000 UTChello matmire makes your most likley already working on a new file but for newer months i think a savanah moniter , water moniter or tegu would be so so cool
Dana Ardebili
2024-08-28 00:36:05 +0000 UTCIf you click on my name on this comment, it should give you a "message" button. Otherwise you can email me at help@matmiremakes.com
MatMire_Makes
2024-07-16 22:14:50 +0000 UTCI'm not a social media person how do I direct message you?
Stephen
2024-07-16 22:08:38 +0000 UTCJust to make sure you are looking at the correct file. This update is on my original Tree Frog (skinny), and not the subscriber exclusive White's Tree Frog (the chonky one). Please Direct Message me if you still need help tracking it down.
MatMire_Makes
2024-07-16 21:56:11 +0000 UTCI purchased the old version on cults3d but I was also a year patreon member before, I can't seem to find your v5 multicolor where I can download.. can you please send me the mulitcolor version
Stephen
2024-07-16 21:43:24 +0000 UTCAnd yup that’s the issue hahaha sorry mate that’s on me
MadMonty
2024-07-14 07:57:22 +0000 UTCThis update is for my original publicly released Tree Frog design (the skinny/lanky one). It sounds like you’re looking at the subscriber exclusive White’s Tree Frog (the chonky one).
MatMire_Makes
2024-07-14 07:50:30 +0000 UTCSorry to bother you Matt, I purchased the release from cults a few months ago and I have gone to re download it but it’s still only showing the file as v4 not v5? (Purchased via cults as only place it was available due to being a hidden listing)
MadMonty
2024-07-14 07:33:44 +0000 UTCAwesome, thank you!
Z-Axis Addict
2024-07-13 20:20:32 +0000 UTCYes, they fit a range, the biggest would be 3x5mm. There is a guide PDF with links in the download.
MatMire_Makes
2024-07-13 20:19:19 +0000 UTCHey Matt, what size of magnets do you use in the feet of these guys? They are much smaller than the ones for the body!
Z-Axis Addict
2024-07-13 20:16:30 +0000 UTCMatt I have to say, I really appreciate that you list the filament that you use. And also that you talk about your favorite aspects of them. It really helps sometimes when you’re completely unfamiliar with that color.
Aaron
2024-07-10 22:27:47 +0000 UTCI had no idea, going to buy this tree frog.
Wynsome
2024-07-10 18:51:28 +0000 UTCThe original Tree Frog was released before you subscribed. So if you have it, you would have had to have purchased it separately. Either on Cults, MMF, or Etsy.
MatMire_Makes
2024-07-10 18:46:51 +0000 UTCLet me check again. I have the White's tree frog
Wynsome
2024-07-10 18:45:00 +0000 UTCAre you sure you were looking at the correct listing? There are two tree frogs. The original "Tree Frog" and the subscriber exclusive "White's Tree Frog"
MatMire_Makes
2024-07-10 18:38:27 +0000 UTCI tried to download the tree frog and the zip file says MMM_WhitesTreeFrog_v04.zip. I am on myminifactory.
Wynsome
2024-07-10 18:26:10 +0000 UTCThanks, got it!
Protomodelos
2024-07-10 17:03:59 +0000 UTCYou should be able to redownload it for free from your Cults' downloads page. Just look for the order here... https://cults3d.com/en/orders
MatMire_Makes
2024-07-10 17:00:38 +0000 UTCHello, thanks for the update. I got it through cults3d, where can I download the correct version? I don't have to pay for it again, right?
Protomodelos
2024-07-10 16:58:13 +0000 UTCHave you ever thought about doing a chameleon.
Anthony Newham
2024-07-10 08:37:03 +0000 UTCThank you for updating the 3mf, can you add it to you bat files next?
Daniel Rosenbaum
2024-07-10 02:42:07 +0000 UTCIt’s no problem at all! I hope you feel better soon!
MatMire_Makes
2024-07-10 02:03:15 +0000 UTCAnd this is why I shouldn't be doing this today because COVID is affecting my brain cells. Thank. You again for answering my stupid questions
Patrick O'doherty
2024-07-10 02:02:19 +0000 UTCYes, either of the Multicolor files should have one body and two heads in them. There are separate multicolor files for whether the body has the captive magnet setup, or the glue-in magnet setup. There is a readme guide in the download too, that PDF goes into more detail about those magnet options.
MatMire_Makes
2024-07-10 01:59:15 +0000 UTCI just clicked and found the file. It was TreeFrog_multicolor_captive_magnets_v05R
Patrick O'doherty
2024-07-10 01:55:25 +0000 UTCI will Direct Message you so that I can share screen grabs if needed.
MatMire_Makes
2024-07-10 01:53:57 +0000 UTCDo you mean inside the 3mf project or the stl files in the zipped folder? They should all be there.
MatMire_Makes
2024-07-10 01:52:23 +0000 UTCOK. My mistake. I now purchased it and can see vertical and horizontal eyes but no body? Sorry to keep bothering you.
Patrick O'doherty
2024-07-10 01:47:38 +0000 UTCHave you purchased the file in the past? You would have to redownload it from wherever you bought it.
MatMire_Makes
2024-07-10 01:33:56 +0000 UTCHi, I maybe silly or missing something but I cannot find the latest version of this frog?
Patrick O'doherty
2024-07-10 01:30:26 +0000 UTCD'oh! I messed up! If you just downloaded the v04 Tree Frog to get the new 3mf multicolor paint job, I screwed up and uploaded the wrong file. That one has some errors in the painting of left side limbs. I have fixed it but you will need to redownload the newest file. It should now be v05R
MatMire_Makes
2024-07-10 00:19:17 +0000 UTCthank you so much ! this is awesome !
kelley gallagher
2024-07-09 22:48:02 +0000 UTCAh, ok. Cool!
MatMire_Makes
2024-07-09 22:38:26 +0000 UTCIf you earned a file from subscribing on patreon, you would have received my monthly invites to shared access on MMF. That's how I give subscribers permanent access to the files and updates. I'll DM you with more info and maybe help you locate where you own the sharks.
MatMire_Makes
2024-07-09 22:31:59 +0000 UTCNVM! Found them under Purchases instead of Shared with Me.
BMatt
2024-07-09 22:28:58 +0000 UTCWhat options do we have to get the updated 3mf files if you didn't download them from Cults or MMF? I have all the bonus models in MMF but the sharks weren't there. I believe I just downloaded them from Patreon.
BMatt
2024-07-09 22:25:37 +0000 UTCI was just looking at the great white files in my MMF Library...is the color just the eyes/mouth? I've been wanting to paint the belly and underneath the mouth, but I stink at painting - just can't get the head right 😅
Mike Sprague
2024-07-09 22:05:13 +0000 UTCI changed the wording a bit. Haha
MatMire_Makes
2024-07-09 22:00:51 +0000 UTCA few days. :)
MatMire_Makes
2024-07-09 21:59:11 +0000 UTCHow soon is the next exclusive?(a few hours or a few days)
Nikolay
2024-07-09 21:58:35 +0000 UTCNot to be confused with the exclusive White’s Tree Frog, which already included a 3MF file! 😊
MatMire_Makes
2024-07-09 21:48:54 +0000 UTCLove it
Jesse McAlister
2024-07-09 21:48:00 +0000 UTCThis is so awesome, and very helpful. Thank you!
Metropolis Made
2024-07-09 21:47:29 +0000 UTC
