B787_Sp(X-Plane)

for some reason i caant hear outside sounds like the APU. I can hear the apu inside only

Talal Al-hajri

it Could be the "Original.bank" and "ALERT.bank" are missing inside the new fmod folder See "CONFIGURATIONS" ( INFO.pdf) 2) - Open the "fmod_Default" and Make a copy of the "Master Bank.bank" file then Rename it to "Original.bank" 3) - Move "Original.bank" and “ALERT.bank” inside the new "fmod" folder

K AKAIO

This sound pack is causing an error. I downloaded it a long time ago and still can't use it. 0:00:03.310 E/SYS: MACIBM_alert: Couldn't find a GUID for this event name! 0:00:03.310 E/SYS: MACIBM_alert: event:/787/1_INTERNAL/ALERTS_CALLOUTS_CHIMES/ALERTS_CALLOUTS/PM/80knots 0:00:03.310 E/SYS: MACIBM_alert: Check sound banks under this folder: 0:00:03.310 E/SYS: MACIBM_alert: Aircraft/Magknight787 Aviators XP12 - 1.11.5/fmod/ 0:00:03.310 E/SYS: MACIBM_alert: C:\GitLab-Runner\builds\2dtum6M9\0\x-plane\design\source_code\engine\sound\soun_fmod_container.cpp:138

호용 김

The 787-10 was added in the latest Magknight v1.11.5 XP12. Currently, xB787_Sp(v1.77).zip only has SND for the 787-9 and 787-8. Hopefully there will be an update for the 787-10.

Jude Kim

This is a problem in MSFS now too.

Walker Grant

Fix posted✨✨

Jun & Taito

For anyone having issue with the latest version of the soundpack (1.76 and below) hearing exterior engine sound inside the cockpit.There is a fix for this: 1.Go to the snd files of the sound pack (or v12 for xplane 12) 2.Right click and open it with Windows Notepad 3.Find the BEGIN_SOUND_SPACE at the very first line of the file 4.Then below find the line AABB 5.Copy the following numbers and paste it next to AABB: -For 788.snd: -2.9 -2.0 -26.6 2.9 3.5 25 -For 789.snd: -2.9 -2.0 -29.6 2.9 3.5 25 6.Save both files,launch the game and enjoy your flight!

Jun & Taito

Just downloaded and in the cockpit I hear outside engine sound. When I move my view to jumpseat I hear cockpit voices. how can I fix this

BurakETC

Hello, been flying this infamous aircraft for a while now apparently nobody likes it but me Lol (REVISED) I was wondering if we can make some adjustments to the flap sounds and landing gear, I really like the default Magknight sounds when the flaps begin to draw and landing gear is activated. If we can use those or replace them with something similar that'd be great! Also can we get louder engines, decreased rain intensity on the windshield, and less bass for the ground roll? The throttle always makes a sound when engaged as well, if we can limit the sound to when it push all the way up or down only. Ill buy you dinner if you can include different (cabin chimes) to choose from :)

Poki Beau

RR version is ready for Kuro MSFS : https://www.patreon.com/posts/42242835

K AKAIO

Is there any way to get this to work with the new Kuro 787-8

lllPulse

the PA announcement start when the "Belt Sign" is "ON" , Keep it "OFF" until ...

K AKAIO

Couldn't find The Parameter on the Aircraft to Trigger that sound

K AKAIO

will there be an update for the new version?

Jelle Scheuble

Great sounds. However, cabin push announcement begins immediately after starting the APU and turning on the generator, and the PA sounds are very quiet, barely able to hear during flight.

Kartingst

Is it possible to add the acars/cpdlc chime?

Elai Bachar

THANKS

Fred Adel

https://photos.app.goo.gl/vc23YXqrQdLFyWcq9

K AKAIO

Thank you! What would be the best way to disable the auto-update feature?

Mario Lopez

💢 Please Disable the Auto-Update feature because it will always Erase the New sounds when Loading the aircraft

K AKAIO

0:01:30.269 I/SND: This aircraft is using FMOD in FULL mode. 0:01:30.269 E/SYS: MACIBM_alert: Couldn't load the sound bank! 0:01:30.269 E/SYS: MACIBM_alert: AMBIENCE.bank 0:01:30.269 E/SYS: MACIBM_alert: 0:01:30.269 E/SYS: MACIBM_alert: 0:01:30.269 E/SYS: MACIBM_alert: C:/jenkins/design-triggered/source_code/app/X-Plane-f/../../engine/sound/soun_fmod_container.cpp:49 0:01:57.049 E/SYS: +------------------------------------------------------------------------------- 0:01:57.049 E/SYS: | Couldn't load the sound bank! 0:01:57.049 E/SYS: | AMBIENCE.bank 0:01:57.049 E/SYS: | 0:01:57.049 E/SYS: | 0:01:57.049 E/SYS: | (soun_fmod_container.cpp:49) 0:01:57.049 E/SYS: +------------------------------------------------------------------------------- --=={This application has crashed!}==--

Mario Lopez

- Make sure the Aircraft autoupdate is disabled - Create a new copies of those 2 Default files below inside the new fmod folder 1) ALERT.bank 2) Original.bank (Renamed from "Master Bank.bank" )

K AKAIO

just installed (with Copilot sounds) on latest magknight version and have no sounds. just want to make sure this is aware or if I did this wrong

Davide Gomez

is this happen after using "How To Enable The Copilot Sounds" ? After installation you must have those files inside the "fmod" folder : - ALERT.bank (this file From the original fmod ) - B7879.snd - Dynamics.bank - GenxEngines.bank - GUIDs.txt - Master Bank.bank - Original.bank (this file From the original fmod ) - PA.bank - RREngines.bank - Warnings.bank - Weather.bank

K AKAIO

I downloaded the latest version and followed your instructions in info.pdf but getting an error: Couldn't find this GUID in any sound bank! 3d8a0f6b-82c8-4c58-8323-1f240db67a52 (soun_fmod_container.cpp:70) Not sure what I'm doing wrong?

zeroeightythree

how can I aktivate the PA system I dont here anything

Jelle Scheuble

FTSiM+Sounds

K AKAIO

oups ftsim sames are heere.

marc carette

Cant not extract ftsimm+ sounds is not good password

marc carette

1/ Disable the B787 Auto-update 👉https://photos.app.goo.gl/BehPPtnaA4sTFY2g8 2/ Re-install the sounds

K AKAIO

MK7891.17.18 test version, this sound effect package cannot be used, and the GUID cannot be found

真华 梁

All the x-Plane volumes are High ?

K AKAIO

it would appear I have no APU sounds outside the aircraft whatsoever. Tried reinstalling soundpack to same result

Fix works like a charm. Thank you!

zeroeightythree

fix uploaded

K AKAIO

fixed

K AKAIO

zeroeightythree

I have to second this. The sound-pack is phenomenal, but I experience the same issue with the flight-deck door being the barrier. I'm using v1.7.4

weird 😳 , the cockpit door will Mute slightly the Cockpit & Cabin Fan sounds but not the Engines , even at full thrust you can't hear anything ? Maybe you only feel that the engines volume is a bit low on the cockpit side ?

K AKAIO

I have found the problem when the cockpit door is open engine sound is inside the cockpit when it is closed no engine sound coming to cockpit

BurakETC

it works very well except internal engine sound. In the cabin I can hear the engine sound but in the cockpit no engine sound. How can I fix this? I hawve tried the fresh install and everything is up to date.

BurakETC

👀 ? , will check that asap . ( BTW the MSFS ERJ is in Progress )

K AKAIO

Did a fresh install and update and i get all sounds except internal engine sounds.

Harbor Brass

your B787 aircraft folder what is it named ? mine is named "Magknight787"

K AKAIO

hello, have downloaded the sounds but cant make much sense of the instructions, i dont have a "Magknight787" folder and cant download one either?

Leigh Rodgers

try to re-install first

K AKAIO

Hi, since the update to 1.7.8 i'm missing some sounds, the engine for example. I see a lot of warnings of missing parameters in the log, maybe they changed some reference? Thanks!

Giordano Corradini

Download Link ( Extract Password = FTSiM+Sounds

Ah! Thank you :)

Benoit Gauthier

New install instruction (make a backup first of the aircraft folder) : 1/ Delete the "eatplpxx.fsarchive" file found inside : "\\asobo-aircraft-b787-10\SimObjects\" 2/ Open "B787RR_Sp(FS20)" & move the "build.py" file and "SimObjects" folder inside : "\\asobo-aircraft-b787-10\" 3/ Run "build.py" file

K AKAIO

This Post is For x-Plane , but did you followed the new install instruction ?

K AKAIO

just Copy and Paste : Password = FTSiM+Sounds

K AKAIO

Jeff M S

Benoit Gauthier

PS. The GPU logic is wrong. I hear the GPU when it is not even selected and I only hear avionics sounds when I use the APU (no Avionics sounds when on GPU)

Alex1985

Can you add the default copilot callouts like 80kts, V1, rotate etc?

Alex1985

will update my B787 copy , then will make the fixes

K AKAIO

Hi, Thanks for this package! i've noticed a few buttons don't have sounds. Left after fuel pump, Logo lights and the cabin chime. I'm running 1.6.7 Alpha 16

Yves Schlapbach

Here's the log.txt file: https://drive.google.com/file/d/156AVSrjcWb4sJeVGXXUx0jyWVVNTw3Gn/view?usp=sharing

Daniel Oviedo

Hi. I'm not sure why but the GEnx sounds don't work. If RR is selected, the engine sounds work fine, bu if GE is selected, there are no engine sounds. It works when I use the alternate configs, but I don't want to have separate aircraft files for GE and RR. I'm on 1.6.6 Magknight and this soundtrack is 1.7

Daniel Oviedo

All Configuration or Lua scripts are "READ ONLY" case , they will not affect any Aircraft command or DataRef behavior

K AKAIO

Hi is there a file in your package that affects the flaps and autopilot? I mentioned previously I'm able to get it to work however seems that the flaps do not move even though the flap lever moves to each detent. Also pressing the autopilot is also not working. If you can give me the name of the files affecting those and will try to isolate them. thanks

Finally got it to work after trying out different combinations. Turned off auto update globally in skunkcraft. Copied the files from your package and paste them on top of the existing oriignal. For some reason, it is still looking for the old files even if they are no longer being used. Finally going to enjoy the engone whine on these :)

Hi i was able to try the above method now i'm able to progress and load the plane but the prob now is i cant press and turn any button or switch and when i manipulate any switch or button i hear a mishmash of GPWS sounds

what is going on Here 😁 , See ... the ALERT.BANK and AMBIENCE.BANK are not included on my sound set !! so the Problem the original "B7879.snd" is still inside the fmod folder => Maybe it always Auto-updating when starting x-Plane ? , try to turn off the "auto update" option on the "skunkcrafts"

K AKAIO

Tried it again with a fresh download, removed the FMOD from the 787 aircraft directory, and replaced it with the FMOD from the zip file and I'm still getting the issue where it is looking for the other BANK files which are not on the zip file. like ALERT.BANK, AMBIENCE.BANK, etc.

Sound installed again on my system and it works fine , also on other user's i presume because no one reported this problem ! >> Try Downloading the sounds again Maybe the archive is corrupted 1/ Remove any fmod folder found inside your Magknight787 ( Move it to another location ) 2/ extract the "xB787_Sp(RR-Genx)(v1.7).zip" 3/ move the new fmod inside the Magknight787

K AKAIO

yup i did that but thats the error i'm getting. It seems that the fmod folder on this package is missing some files because when i copied the other BANK files and GUIDs.txt from the older version i'm actually able to load into my flightand not crash to desktop.

Rename or relocate the default fmod folder , then install the new one ( it was mentioned on the pdf file )

K AKAIO

sorry its version 1.6.6

Hi i installed it on my Magknight1.6.2 and i'm always getting an error "Could not load sound bank alert.bank" It crashes xplane to desktop

Dropped in the RR file and it works now. thanks!

Harbor Brass

1/ First , Please check using "DataRefTool" if those 2 Datarefs are available : aero787/graphics/kill/enginesGE2 aero787/graphics/kill/enginesRR - Also check thier Value when changing engine type via "Pad" 2/ Try This New Configuration , it will enable Genx & RR separately ( if it dose not work ! it mean something blocking the x-Plane Volume sliders ) https://www.patreon.com/file?h=37420915&i=6818440

K AKAIO

this is what i get. https://youtu.be/TFwKMgfJj6k

Harbor Brass

Harbor Brass

i have the latest version too and i updated the sound using it ,

K AKAIO

downloaded 1.7 and still not working with 1.63

Harbor Brass

I'm confused. so is there a updated version or are there steps to get the old version working?

Harbor Brass

Relocate or Rename the Original fmod then re-install the new one

K AKAIO

Just updated my copy and the sounds works fine , only some missing sounds for the new buttons/switches added

K AKAIO

The Original Fmod (AXP ) is always re-installed after a new update made of the Aircraft . because of that you will get a CTD when Deploying the Aircraft . > Therefore you need to re-install the New sounds again , but do not overwrite files when installing !! , but .. How ?😣 : a/ Relocate or Rename the Original fmod b/ install the new one Little Hint !!👀 : To Get a Faster Aircraft update always keep the Original "fmod" folder , you can rename it to "fmod.1" or else ... , but do not delete it !! - before updating the Aircraft you need to restore the default fmod by renaming "fmod.1" to "fmod" and also you have to remove the new installed "fmod" ( from B787_Sp)

K AKAIO

Max Burrell

did you used the new configuration ? https://www.patreon.com/file?h=37420915&i=6317352

K AKAIO

just updated to 1.62 and i get no engine sounds. tried reinstalling plane and sound pack to no luck.

Harbor Brass

Hi I followed your instructions but a lot of the switches don't make sounds for me either. I have version 1.5

Martial Blaizot

configuration file added for Beta V1.6 : https://www.patreon.com/file?h=37420915&i=6317352

K AKAIO

can you please make it compatible with the latest update?

Dillion Talks

Noted

K AKAIO

It doesn't work in 1.6.0 version.

SMILE CANDY

Try it ! , i did not test it yet on the newer update (which i'm not aware about )

K AKAIO

Hey, is still sound pack compatible with v1.5.1 and above now? Or should I use the default FMOD?

Brad

I hear a weird sound in my cockpit https://imgur.com/a/OXGDIEH

sure , i already have this set on my requested list .

K AKAIO

Any way for soundpack for new SR22 freeware? Thanks!

Sky Prensky

He has made a 777 GE sound pack here: https://x-plane-sounds.blogspot.com/2019/09/triple7-ge.html

Drone Tutorials and More

Waiting for B777 GE sound packs, great job!

JosephOh

Pack re-uploaded with a few fixes .

K AKAIO

version 1.5+ of the 787 also.

Shane Smith

Some things to note during initial testing. This is with the GenX+RR config using GE engines. I can't hear the APU outside. No APU startup or running sounds. Outside the plane in front if you are close to plane, it sounds like you can hear the ground power unit even if it isn't enabled. I think I'm also hearing it in the air if I'm close to front of plane. Also not hearing warning sounds like takeoff config as I was at flaps 0 and wasn't being warned when going toga for takeoff. Engine sounds internal and external for GE is good though. Will report as I fly it more and test.

Shane Smith

Is this now updated? Just got an email

Praanot Kokkate

Yes

Praanot Kokkate

The is a mistake in the engines parameter on the (.snd) file , Fixing...

K AKAIO

I am also missing sounds for switches such as autobrake, fuel switches, start switches

Supgod10

roger that for GE (internal and external), RR works but only external engine sounds - no cockpit engine sound for RR

Praanot Kokkate

GE's are working on 1.5.0rc1x but I can't get the RR engine sounds to work

Supgod10

doesnt seem to work in 1.5rc1 . tablet not working and cannot start the engines, was using both RR and Gen pack, will test the other tomorrow

Nick Buick