A340RR_Sp (X-Plane)

Yesssss new update!

Nomad Spotter

Update plez!

Kartingst

Bump for update please.

Dino Rossetti

Please take the time to update this. It would be greatly appreciated since this is quite unusable atm.

Konsta Rautakallio

please update this

Konsta Rautakallio

Yes, start up sounds too quiet, no buzz saw on spool up for take off or through climb out. Sounds in cruise are accurate based on my memory of flying on her.

Simon ML

The engines are very quiet and there's no roar on the take off i followed the steps is there something i'm missing? tried older versions same problem

iZ iBRA

yes , tested on Toliss v1.2.2 on XPL12 , just remove any installed fmod folder then install the new one

K AKAIO

I tried it but no luck. Does this sound pack work with XP12?

HABIMANA CLEMENT ROBERT

Re-install and disable the Auto-Update option on the "skunkcrafts"

K AKAIO

Does this work with Toliss? I followed all the steps but no luck: Errors: One or more issure were found with this sound back Please check log.txt for more details There was a minor problem parsing the VRCONFIG And then, some weird virtual pilot and copilotss

HABIMANA CLEMENT ROBERT

Engine sounds are too low. The APU easily sounds louder than all four engines at full thrust.

SPST

The sounds are too low

Justin Payen

Engine sound is very, very low from the outside. I even thought there was a issue.

Eduardo Holanda

Same here. The only sound I can hear is the GPU

Airbus 737

overall it is good but the engines are WAYYYYYY too quiet on the outside

Chris Peoples

I've tried this soundpack with the JarDesign A340-500 in XP12 and it doesn't appear to work, there are a bunch of soundbank errors upon loading the plane, is this supported in XP12, it works flawlessly in XP11.

Sir Ropey

Yes same issue for me

Trev NG

Hi, fresh install of the A346 here: The engine startup sounds are basically inaudible. I think they are very quiet as well, compared to the last version. My volume sliders are according to your guide. This is using 1.46. Anyone else having the same issue?

Enrique Vaamonde

fixed

K AKAIO

I have provided the full log output on the Discord channel.

Michael Hansen

I get a couple of invalid command tiggers. They are at lines 1868, 1873, 2476, 2481, 2487, 2492, 2498, 2503, 2509 and 2514. They are named: AirbusFBW/CargoFireProt/APUAgentPush, AirbusFBW/ACP3/RMP3Swap, AirbusFBW/ACP3/VHF1RMP3 and AirbusFBW/ACP3/VHF3RMP3.

Michael Hansen

maybe because the "Master Bank2.bank" is missing inside the fmod folder

K AKAIO

I am having the same issue. I am using no camera addons. The exterior engine sounds seem to be real muffled. Extremely low.

PS

Yeah V1.45 is glitchy it won't load up and gives and error

Jess

Maybe you're using a Camera Addon ?

K AKAIO

Still can't find the issue , it even tested on the latest Toliss v1.2.2

K AKAIO

Yes, everything is set according instructions

Sérgio Lamares

X-Plane Volumes are 100% ? , check also the Volumes on the Toliss ISCS

K AKAIO

Hi! I can't ear exterior engine sounds, with latest version, 1.45... any fix ?

Sérgio Lamares

Yes Soon , Currently updating Toliss A321/A319

K AKAIO

plz update toliss a346 soundpack for xp12 version

JP_BBS

Volumes are controlled by the Main X-Plane sliders , Toliss Sliders will be enabled on the next version 👍

K AKAIO

Cool I look forward to it. The exterior engine sounds by this contributor ( https://forums.x-plane.org/index.php?/files/file/82483-a340-fmod-remix-full-overhaul-of-soundscape/ ) are what I prefer. I find your exterior engine sounds to be a bit too soft in general across all your aircraft fmods.

Porcelain Kilt

Will the sound control in the ToLiss panel still be inoperable? Because if that is the case, I can't install.

Michael Hansen

Sorry for the Delayed response and Thank you 😊 . - Symptoms start on the 3rd of July until the 18th to full recovery , Condition did not get so serious but those days was awful 😵 - 👉 No Problem ! , further tweaks will be made to make the Spool (Whine) a bit Louder

K AKAIO

Great that you recovered from your infection. I hope it was not to bad :(. In my opinion the updated sounds are a little bit to quiet and also I miss the spool up sounds like it was before. Would be great if you could change that.

Christoph Adam

You mean the ATC ? You can : - Mute it by using the VHF2 Knob ( Press Down ) - Change the Com2 Active Frequency - Change the Transponder Mode to ( AUTO/ON ) - Change the Transponder Code - Completely disable it by modifying the ".snd" file ( instruction inside "INFO.pdf" file >> How To Fully Disable The ATC << )

K AKAIO

Did you create a "Master Bank2.bank" copy then Moved it inside the new fmod folder ? after installation you must have those file inside the fmod folder : - a340-600.snd - A340-600_StdDef.snd - a340-600_XP11.snd - A340-600_XP11_StdDef.snd - ExtEnv.bank - GUIDs.txt - RREngines.bank - Master Bank.bank - Master Bank2.bank ( This is a copy of the "Master Bank.bank" file from the Default Toliss fmod folder )

K AKAIO

Thanks for the update! Just a question... Does it possible to disable the radio comms sound when on ground?

Gonzalo Martínez

hi, i just downloaded the new 340 sound for my toliss. everytime i install and reinstall, i always get a message from x-system saying, "couldn't find this GUID in any sound bank. 30eb6864-9789-4306-92a2-73ebba64a23c. please help.

Kc Cooper

👍 Thanks for the Feedback , i think this happen because the APU Sounds files are a "Stereo" format (3D) but the exterior engines are not . 👉Will Try to make the exterior engines also "3D" , if the result become buggy 😣 then will have just to reduce the APU Noises .

K AKAIO

Thanks for updating. You can hear the APU over the RR engines at idle with camera close up to any operating engine...

Porcelain Kilt

Thanks for the update :)

Kevin Sanchez

@Zand Really? I will try that

Charles Piah

Waiting patiently for a fix for the new update. :)

Thomas Arbel

Hello Charles, First the sounds did not work for me. I changed the name of the 2 .snd files in the Fmod file to a340-600_XP11.snd and a340-600_XP11_StdDef.snd because the standard Toliss .snd files have changed name. This worked for me, hope it works for you also, greetings Stef

Zandluze1

Yea, the sound does not work with v1.1

Charles Piah

Hey man, I tested with v1.1 of Toliss and can confirm it does NOT work... i think as a minimum the cause is the renaming of the acf file. Hoping for a fix soon :)

Kris

Does this work with the new 1.1 update of the toliss A340?

porter

nevermind fixed it

xra

Plane can't load Master Bank2.bank and crashes the simulator, there is no provided Master Bank2.bank so I cannot load in the aircraft.

xra

the configuration will be Ready ASAP

K AKAIO

Just wondering if its possible to include the original engine sounds, since they became really good, as an option - problem with using the original sound is, they don't get the sound during cruise right which is really good on this soundpack. You might even get in touch with him https://www.youtube.com/watch?v=B1TDXI9vY7A because his Trent Sounds are used in the Default Toliss since v1.0.2 and he is willing to share his FMod Project

Leertaste

Did you follow exactly the instruction inside the "INFO.PDF" ? After the installation you must find those 6 files inside the "fmod" folder : - a340-600.snd - a340-600_StdDef.snd - ExtEnv.bank - GUIDs.txt - Master Bank.bank - Master Bank2.bank

K AKAIO

my aircraft crashes after this... im confused on installation even after the instruction...

Moonsung Jung

would like to hear the eng exterior sounds higher. Can hear the APU over the engines on exterior views.

Porcelain Kilt

try again later , if you can't even download after +24h then will re-upload it to G-Drive

K AKAIO

Is there a mirror for 1.43? The current link seems to be not working.

zeroeightythree

Disable the Aircraft's Auto-Update on the "skunkcrafts"

K AKAIO

Re-install the sound Pack again and Disable the Aircraft Auto-Update on the "skunkcrafts"

K AKAIO

Toliss just made a few changes but those bugs shown on the "Log" file are minor and they will not affect the sounds .

K AKAIO

I'm having an issue with the recent update i keep getting a master bank error is there any way to fix or is there something i have done wrong?

Ryan Brown

Djmax

I went exacetly through the install process for my toliss a340 but still get all the default sounds. What am i doing wrong?

D O

FTSiM-Sounds

K AKAIO

Allways problem with password

marc carette

New changes are made 👉 "Louder interior Engines HowL" , uploading soon

K AKAIO

Thank you for the soundpack, really brought the A346 to another level. Only one complaint though - the idle thrust "howling" noise is not quite on point... This is what I mean - 1:45 in this youtube video (https://www.youtube.com/watch?v=B1TDXI9vY7A). Maybe look into it please??? Other than that though, I love these sounds so very much! Again thank you for the hard work!

dreamliner_fiend

1/ Howling Noises are Available , Maybe not very Loud for you when facing the Engines Intakes ? 2/ The Sounds are Designed with a Maximum Engine "N1" RPM of 80% = Full Thrust sounds at 80%N1 , So when the RPM is Gone above +80...90% you will notice no difference 👉 This was set after noticing the limited Takeoff Power on the Toliss A340 ( Mostly it do not reach N1 90% )

K AKAIO

Sounds are amazing! I just have two minor issues/improvments: First is that the distinctive howl sound of the Trent 500 is missing (when leaving idle thrust at takeoff for example). Secondly is that from TOGA, FLEX/MCT and CLIMB there´s little to none difference in sound. For example when taking off in TOGA, when reaching thrust reduction altitude and the thrust levers are moved to the CLIMB position, there is little diference in sound compared to the TOGA power, almost like if there was no reduction at all. If you could improve this it would be amazing! Keep up the good work! :)

Francisco

💥 instruction to enable Toliss sounds are inide : "A340_Sp (RR)\Toliss Default\Others\Parameters.txt" 👉 To enable the Toliss default brake_fans : - Copy and Paste this Parameter inside the "a340-600.snd" file ( using NotePad ) BEGIN_SOUND_ATTACHMENT EVENT_NAME /Systems/LMLGBrakeFanExternal VEH_XYZ -5.5 -5.0 1.39 EVENT_START_COND AirbusFBW/fmod/sys/brakefanvol >= 0.03 EVENT_END_COND AirbusFBW/fmod/sys/brakefanvol < 0.02 END_SOUND_ATTACHMENT BEGIN_SOUND_ATTACHMENT EVENT_NAME /Systems/RMLGBrakeFanExternal VEH_XYZ 5.5 -5.0 1.39 EVENT_START_COND AirbusFBW/fmod/sys/brakefanvol >= 0.03 EVENT_END_COND AirbusFBW/fmod/sys/brakefanvol < 0.02 END_SOUND_ATTACHMENT

K AKAIO

Could you check the Brake fan sounds ?

Cord L

FMC buttons are not loud when the Avionics_Fans are Running

K AKAIO

no sounds on clicking fmc buttons in toliss A340 ..pls help

Govind SRaj

accidently deleted many ROAR samples from the HDD (will check on my other Drives ) , for now the used inside the pack are the best ones

K AKAIO

Yes slightly Louder Max Packs noises when the : "PACKS AIRFLOW" is set to "HI" position "COCKPIT"/ "CABIN" Temperature Knobs are set to "COLD"

K AKAIO

I have been enjoying the mod. I am always one to love the deep roar of those engines!

Smart Alec

Is the air conditioning packs louder with the 1.42a update? I'm asking because they sound louder even with the air conditioning temperature and flow knobs in the same place.

Marc

small fixes requested + a tweak for the Toliss Configuration file to adjust the Startup

K AKAIO

I was wondering what is new with today's update?

Marc

You Got me Confused a bit (👀) so i did compare both A340RR & B747Genx Project sources and the result is not even close 🙂 , 👉so the answer is Nope ! , The A340RR sounds are completely different from the B747Genx

K AKAIO

Thanks for the great sound pack! Wanted to ask if the RR engines should sound (or sound) similar to that of the SSG 747-8i. I have installed both of the sounds and they are very similar specially on takeoff. Haven't flown in real life on aircraft with RR engines (apart from the 757s so that's why I ask). I do understand that is a very early version and I'm greatfull for the work.

Sebastian Gonzalez

The "Smoking" was enabled as the "Belt" sign , and the Chime are set to a bit louder now ( not uploaded )

K AKAIO

Set the "PACK FLOW" to High , and Turn the Temperature knobs to "C" Position ( Cold )

K AKAIO

🤣 , still looking around to find a solution for the startup 👨‍🔧

K AKAIO

the error says Could not load soundbank Master Bank2.bank (sound_fmod_container.cpp: 49)

Felipe Gatica

hello good today download the FMOD of the a346 Toliss but when starting the aircraft the X plane throws me an error and crashes the game. Might you help me?. Greetings.

Felipe Gatica

Can you make the air conditioning packs sounds slightly louder in the flight deck, can't hear them even with AC on. Cabin is fine though.

Marc

louder startup , engine roar , chimes and flaps I BEG YOU ! DYING HERE !!

Saad Alsulaiman

Great to see this with the Toliss now, few thing I can think off. The chime for No Smoking / Seat belts could be slightly louder on flight deck. As well as the cabin call buttons

William Tocher

Will re-check the configuration file to find any errors , on the Meanwhile Can you record the bug in a video or sound file (upload it on "youtube" or similar ) >To make the sounds a bit clear , Make sure all the other cockpit sounds are disabled (like the Fans/avionics )

K AKAIO

Sounds like a button press!

sLairT Gamer

is it sounds like a switch or rotary knob ?

K AKAIO

Here is one I have been unable to solve! Does anyone else have a clicking sound on unassigned joystick buttons??

sLairT Gamer

Figured it out! Ignore query!

sLairT Gamer

Is anyone else missing the seatbelt on and off sounds? Or maybe I did something incorrect on the install.

sLairT Gamer

Would be nice if you can add the real A340 callouts

Timo Netzlaff

checking and fixing ...

K AKAIO

1/ The startup sounds issue is caused by Toliss Parameters ( as mentioned above " Toliss Startup a bit quick" ) 🤔 Will see if we can edit the Toliss Configuration file and add more time for the startup , then the result will be much better 2/ More "Buzz-Saw" noises will be added next Fix 👍

K AKAIO

Noted 👌 ,

K AKAIO

1/ Buzz saw is a bit Muffled on takeoff then gets louder as the Airspeed and the Altitude increases , meanwhile will look for alternative Roar noises on my library 2/ if you can record in a sound file your throttle quadrant noises , then will add them on the Pack as an additional option

K AKAIO

Thank you for this soundpack! As mentioned before a bit louder buzzsaw would be nice. Its barely noticable with TOGA and Wingview. Btw. I'm using the HoneyComb Bravo Throttle and the commands for the knobs (ALT, IAS, etc.) sound different from them when I turn them with the mousewheel. It would be nice if they would sound the same

Yves Schlapbach

So far i really love the soundpack for the ToLiss A346. One thing i think could be improved would be the engine roar, since it really lacks bass.

Muammar Gaddafi

Thanks for the update. The new Toliss engine sounds (1.42) have a bit of static popping sound when the engines are starting. Please take a look.

Jason Leung

new sounds are great for toliss, but can we make the engines louder on start up inside the cockpit and on takeoff too plz

Nick Buick

okay cool.

Shawn Joseph

1/ ignore the "MasterBank.strings.bank" , it just a standard fmod file but not used by x-Plane ( forgot to remove it ) 2/ Cabin Chimes are not Too loud when the cockpit door is Closed , 💡 the "aft" & "exit" chimes are quiet on the Cockpit side

K AKAIO

Everthing from engine to cockpit works excepting the “Cabin Call” Chimes........ im i missing something out?

Shawn Joseph

I basically have 3 bank files now......Master Bank.bank( the original) Master Bank2.bank( the copy of original Toliss) and the new one mention above in the FMOD......is this how it should look when completed or im doing something wrong

Shawn Joseph

FTSim i might be doing some thing wrong but is this the right way the FMOD should look after following the instruction posted? Im asking cause i notice a new bank file call " MasterBank.strings.bank" plus other one which is the original one that was in the prior S-Pack.

Shawn Joseph

Thank!!!

Alexey Titov

MASSIVE improvement over the last version for the Toliss A340, thank you FTSim+!

Marc

Thank you for the update

Saad Alsulaiman

Thank you so much!

Edward Brewer

Are you going to add air conditioning, cabin fans, and wind sounds for the ENITRE cabin? The current mod only has it for the mid and rear portion not the front. The air conditioning & cabin fans are missing from the cabin. The air conditioning packs need to be much louder in the cockpit & cabin, I can't hear them. Other than that, great mod! Only needs some tweaking :)

Marc

🧐 Currently Noting all the Feedback and making the requested modification

K AKAIO

Usually are not too loud because the engine are a bit Far from the cockpit ( A bit like B777 ) ,

K AKAIO

Exterior Engine sounds ? or interior ?

K AKAIO

APU on the Exterior View ?

K AKAIO

Thank you for the sounds, tell me in a real plane the engines are also not audible in the cockpit?

Alexey Titov

Engines are tad low and also if you get to center under the plane you lose the engines at a certain point. I have a camera setup (external) that is landing gear view.

Storm Walker

agree. a little too quiet.

Harbor Brass

Im not getting sounds for the APU or the flight attendant caller buttom for TolissA340.

Shawn Joseph

The engine sounds are much too quiet! I cannot hear anything on startup or any buzzsaw of those lovely Trent 500s.

Edward Brewer

Thanks for some great sounds once again, you never disappoint! One thing I am missing which is included in the def. sounds is the first initial touchdown with the AFT Main Gear. Would be great if this could be added :D

Jakob Ek Jensen

The engines are a bit quiet, especially on startup. You also cant hear any roar or buzzaw

olai dreisbach

Hi, thanks for getting the Toliss A340 Soundpack out so quick. A couple things: - Engine sounds are way too quiet and the buzzsaw is not audible at all, even at TOGA power - There is no change in sounds when the packs are turned on/off, i.e. there are no dedicated pack airflow sounds. This is missing in the default Toliss soundpack as well, so it would be great if you could work on this. - There are no internal sounds in the cabin except the engine sounds.

Chirag Abichandani

So I tried the sounds with the Toliss A340, I noticed that the wind sounds are way too quiet in the first class cabin but are fine in the middle of the plane. The wind sound has a lot of base on my system can you please include a alternate wind sound. Finally the autopilot servo sound that activates when you engage and disengage the autopilot is missing. Will this be fixed?

Marc

install tutorial inside "INFO.pdf" 1/ Did you made a copy of the "Master Bank.bank" file found inside the old fmod folder ( fmod.1) ? 2/ Did you rename the copy of the "Master Bank.bank" to "Master Bank2.bank" 3/ Did you move the "Master Bank2.bank" inside the new installed fmod folder ?

K AKAIO

I just got the new sounds for the Toliss but I'm having issues with the GUIDs

Marc

Haha! I understand the anticipation! Can't wait until it is released!

PS

When would we hear the roars of the Toliss A346 ? its the 6th now and WE ARE DYING !! Please Release it :)

Saad Alsulaiman

1 week or less ( 5 ....8 Nov )

K AKAIO

hello very good could you give us an estimated release date of the FMOD sounds for the a340-600 toliss I am looking forward to the sounds with great joy, I hope your wonderful work will be released soon. Greetings.

Felipe Gatica

still in Progress , Cockpit sounds takes a bit more time

K AKAIO

👨‍🔧 Toliss Cockpit sounds are in Progress ....

K AKAIO

+1 toliss released monday fyi , get it doneee lol

Nick Buick

Any updates on when the Toliss 340 sounds are coming out?

William Tocher

Agreed!

porter

Same here! :D

Filip Chudoba

Toliss A346 is released! Looking forward to your work.

JosephOh

Noted 👌

K AKAIO

Sure , after its release

K AKAIO

The packs sounds still don't work with APU bleed

Alex1985

Are you going to make sounds for the Toliss A340-600?

Andrew

Fix will be available shortly ...

K AKAIO

Great, thank you. Works fine. Jar Clicking bug occured. Seen you've got a work around to that. I also wonder if there's a possibility to lower the volume of the hydraulic pump's sound during midair. I can.hear the pumps during flight in outward camera sight, which doesn't sound realistic. At least in my opinion, they're far too loud during midair operation. They're almost as loud as the engines running MCT. Thanks in advance for a hint!

David Snow

Try it , it Will work fine only if "JarDesgin" completely re-model their Aircraft package

K AKAIO

Is this version compatible with the latest version of the JD A345 (JD340-V1.3R1)?

David Snow

It was never requested before . The Engines sound sample are available (Williams FJ44) ,Please name the Package that will be used for to add your request

K AKAIO

Any plans for the PC24 for x plane?

skif

👍

K AKAIO

can we have louder startup sounds please,

Nick Buick

This is a JarDesign bug, but I wish there was a way to completely mute the sounds of knobs and buttons.

Eduardo Holanda

there is continuous clicking sounds while descending...especially at idle thrust..its like a continuous click sound...anyway to rectify it?

Govind SRaj

No PA sound is added yet , is it in a specific Position are it sounds all around the Aircraft ?

K AKAIO

Just want to verify after i take off there is this loop sound of I guess simulating the shaking of the plane or something? Sounds like folks' baggage being moved around (sounds like the 3jcabin sounds when you have the boarding passengers ambience on). Is it suppose to sound like this for the entire flight?

Ayo Kiff

-Need to Mute all Jardesign sounds by using the "Sound 3D Volume" tool ( see "MuteJAR.jpg" )

K AKAIO

Arent the button sounds not modified from jar A340 sounds? like how it sounds when we switch on the batttey...the start up sounds etc..it all still sounds the same!! does this include only engine sounds?

Govind SRaj