CRJ_Sp (MSFS)
Added 2025-04-19 23:38:00 +0000 UTC🔅----[ INFO ]----🔅
CRJ Sound Addon For MSFS
🔅----[ What's inside ]----🔅
GE CF34 Engine sounds
Cockpit Avionics sounds , Power Bus , Fans
Weather effects : Wind , Rain
L-Gear sounds : Roll , Door , Wind Drag
🔅----[ Change Log]----🔅
v1.17 (16/July/2025)
Updated Configuration for the latest Aerosoft CRJ version
Improved interior engine sounds (Reduced "Hiss" noises , Fixed “Pops/Clicks” Artifacts , Tweaked 3D view )
Added Configuration For VirtualCol CRJ200 Package
v1.16 (20/Apr/2025)
v1.15 (07/Dec/2022)
....
🔅----[ Notes ]----🔅
🔅----[ Available Links ]----🔅
v1.17
For "Aerosoft-CRJ v2.1" (Store version) : Download Link
For "Aerosoft-CRJ v2.1" (Marketplace) : Download Link
For "VirtualCol-CRJ200" (Store version) : Download Link
For "VirtualCol-CRJ200" (Marketplace) : Download Link
Older Releases :
v1.16
For "Aerosoft-CRJ v2" (Store version) : Download Link
For "Aerosoft-CRJ v2" (Marketplace) : Download Link
v1.15
For "Aerosoft-CRJ v1" (Store version) : Download Link
v1.15b
For "Aerosoft-CRJ v1" (Marketplace) : Download Link
👉 Install tutorial : Video
Comments
Hey, the latest update works for the CRJ in 2024 if you install the marketplace version (regardless of whether you bought it in the marketplace or not)
Ungeneer
2025-04-22 21:37:03 +0000 UTCCRJ v2 is definitely in need of this. I forgot how bad the sounds were
Eric Hill
2025-04-02 22:27:53 +0000 UTCpossible update for the CRJ V2 2024?
A320Pilot
2025-04-01 14:37:01 +0000 UTChey guys thx for the sounds. Just wondering if the CRJ 900 could get an update to it's APU sounds, they are off compared to real life, probably the only request i've ever had about this SP Edit: I've attached some videos below showing what I mean (HEADSET WARNING Close to Exhaust) https://www.youtube.com/watch?v=BIjIY1ng9YA https://www.youtube.com/watch?v=NZiQL02otUw
Chaun Krause
2024-02-22 03:07:00 +0000 UTCI have a marketplace download and I'm a little confused about the instructions. My CRJ is not installed in a community folder. It is installed through Steamapps/Common/MSFS/Official/Steam/aerosoft-crj From my understanding, I copy the original sound file into the modded sound file folders, all 4 of them so I end up having 3 files in there. Where I start to get confused is to where I actually put the CRJ_SP folder. Do I put it in the same subfolder as where the airplane is installed? Official/Steam/CRJ_SP or Official/Steam/aerosoft-crj/CRJ_SP Or do I install it to where all of my other 3rd party community files are? Common/MSFS/Community I think what is throwing most people off is the HLM_Packages as I do not have this sub folder
Jason Paden
2023-11-17 22:04:58 +0000 UTCI can't get the switches, buttons, or APU to make noise using 15b for Marketplace download... I have looked at what you suggested others to do as well, and yet I still can't figure it out. Would it be possible for you to redo a more comprehensive, easier to follow guide to install sounds in the CRJ if we purchased on Marketplace? I find the instructions on this plane confusing... possibly missing steps too? For example, the guide says to delete stuff in the jason file for the crj 550, but if you have the CRJ 700/900 expansion... there's a .jason file in there too with the same items that could/need to be deleted... Your other packs I haven't had trouble with, but I've now spent hours w/ uninstalls of the plane over and over after trying different variations. Why wouldn't my switch sounds, APU, and possibly GPWS not be making sounds at this point?
Davis Ebbert
2023-08-23 18:42:37 +0000 UTCAnyone else feel like they are following the steps but its not working? On the market place version, trying to get the CRJ 900 the FT sim Sounds. APU sounds, Switch sounds, etc not working :/. @FTSIM is there a way you can either make an easy install program for marketplace purchasers of the CRJ, or more linear directions for this aircraft? TIA.
Davis Ebbert
2023-07-20 17:01:19 +0000 UTCI see the problem - I have no crj folder in my community folder
Dash8Demon
2023-02-02 22:51:52 +0000 UTCNevermind, let me watch the tutorial again
Dash8Demon
2023-02-02 22:41:39 +0000 UTCYou did install the v1.15b ? and you're using a MarketPlace or Orbx version of the CRJ ? 👉After installation you must have those 3 files ( "Aerosoft_CRJ.PC.PCK" , "CRJ_Sp.PC.PCK" & "sound.xml" ) inside : "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000"
K AKAIO
2023-01-30 22:07:01 +0000 UTCAfter doing a fresh install and following the new install procedure, I no longer have switch sounds or GPWS callouts
nick angel
2023-01-30 16:24:09 +0000 UTCNope , Please follow the instruction on the "INFO.pdf" file
K AKAIO
2023-01-26 18:23:46 +0000 UTCDo we still need to move the CRJ to the main community folder? I see it says Easy to Install but the recommended video link (and your documentation) points to a manual install. Right now my CRJ is in this folder G:\Aerosoft One Library\Add-ons\msfs-7378-AS15236\gameDirectory~Community
Brad
2023-01-20 16:56:06 +0000 UTCsettings are Re-adjusted in "v1.15" , try and check if the bug still exist
K AKAIO
2022-12-07 12:36:14 +0000 UTCOne thing i have noticed is that of the rain drops sound while passing thru a gloomy cloud but there is no actual rain. Hope you can check on this thanks
Chris Torres
2022-11-16 13:12:33 +0000 UTCthanks for this. hope you keep this updated. Im a supporter since x plane days..
Chris Torres
2022-11-15 11:33:20 +0000 UTCThe sound works on the CRJ v1.0.18 and on the Pervious Releases - Please install the "v1.14" , ( No need to Relocate the Aircraft main folder ! , keep "aerosoft-crj" inside "Community" ) How To ? : 1/ Make sure the Aircraft at it's default install state ( nothing removed or edited ) 2/ install the "v1.14" ( just extract and Move "CRJ_SP" inside "Community"
K AKAIO
2022-11-14 20:48:53 +0000 UTCDid you tried the "v1.14b" ?
K AKAIO
2022-11-14 19:17:01 +0000 UTCAny plans for an orbx store compatible version?
RunawayBot
2022-11-14 14:22:41 +0000 UTCI've followed installation steps, and while i can hear engine sounds and gear sounds, the following sounds don't work: Switches APU (sound is all messed up from outside view Reverse thrust - no sound No warning sounds
John Whitehouse
2022-11-10 23:01:58 +0000 UTCGreat sounds. Have a suggestion on the air-conditioning sounds. Are you able to increase the volume on that and maybe a but more volume on the avionics too?
Bill Alicea
2022-10-28 17:43:03 +0000 UTCThink I just had my first 'freeze' with the new sounds. Anyone else had this happen?
tangjuice
2022-10-27 15:52:25 +0000 UTCExcellent sounds compared to the original. Now I want to fly the CRJs even more. I did notice some sounds aren't audible anymore. Overheat test, etc.
tangjuice
2022-10-27 14:27:53 +0000 UTCHonestly I am still not happy. The exterior are still not characteristically. Also the whining for the interior is too weak.
SockelMania
2022-09-15 12:32:47 +0000 UTCI can't get the sounds to work with the v.1.14 update even when following the instructions. Note: I have the ORBX version of the Aerosoft CRJ
SRT95
2022-09-08 15:07:50 +0000 UTCI gotta agree with Luc! I've tried installing the latest update multiple times exactly as instructed and still can't get the aircraft to have any sounds of any kind.
Liam Montgomery
2022-09-08 03:59:52 +0000 UTCCan you make the v1.14b an (Easy to Install) version please...
Luc Gaupin
2022-09-07 18:48:22 +0000 UTCAfter serveral months of testing and comparing to the real aircraft I have to say this soundpack got pretty well so far. Only a few more suggestions to make it perfect: Remove a bit more of the humming on idle. Seperate sounds between cockpit and cabin more (see video number three, hardly any engine noises in the cockpit). Also the whining needs to be louder / higher and more in the foreground in the cabin (also less humming here). The start up and shut down needs a complete rework from the inside and outside. Can you also try to add some engine windmilling sounds in the future? Master caution in the cabin needs to be fixed by Aerosoft, doesn't it? Some reference videos: https://www.youtube.com/watch?v=l-c8D2KRipg (engine start up outside) https://www.youtube.com/watch?v=NZiQL02otUw (APU start up) https://www.youtube.com/watch?v=MNINOa6GigQ (cockpit take off) https://youtu.be/X1eynj09oAI?t=42 (characteristic idle sound, currently missing) Let's make this soundpack perfect. :)
SockelMania
2022-09-01 13:57:39 +0000 UTCGreat addition to the CRJ, would love some new switch sounds though.
Parker Robinson
2022-08-28 18:29:19 +0000 UTCWould like to add that it is all the original sounds, so no warnings, callouts, APU or other sounds. I have tried both update variants using MSFSLayoutGenerator.exe and build.py with Python but the issue remains.
Potta
2022-07-18 21:55:06 +0000 UTCExperiencing the same as others in this thread, I have the Marketplace version and get no sounds from the switches anymore. It worked before, and I have followed each step in the INFO document. What to do?
Potta
2022-07-18 18:11:49 +0000 UTCUse the "(v1.13b)" For the Marketplace version and follow all the steps in the "INFO.pdf" file After installation you must have 3 files ( "Aerosoft_CRJ.PC.PCK" , "CRJ_Sp.PC.PCK" & "sound.xml" ) inside : "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000" Still no Sounds ? then it Must be the "Layout" file found inside "aerosoft-crj" is not updated sucssefully a) Try updating again with a diffirent Tool , "MSFSLayoutGenerator.exe" or "build.py" b) Try updating the "Layout" file Manually using the Tutorial added Below "# Notes"
K AKAIO
2022-05-12 22:19:18 +0000 UTCDid try many weather configuration but no bug found , will check it out more ....
K AKAIO
2022-05-09 14:06:43 +0000 UTCupdate2: confused! do I just need to follow steps 2)for the marketplace version? if yes is partA) the community folder and B)the actual install folder in the "official" folder or the other way around - note my official folder already has the "aerosoft_crj_cp_pck" in it?
mac
2022-05-03 19:05:50 +0000 UTCUpdate: just noticed there are a few more steps "-" "2/A + B" "3/A + B + C" - do I need to follow them all to get this working with the market place version ? and how do I get the msfslayout generator to work do I just copy the "aerosoft-crj" folder into the .exe folder and then what exactly happens?
mac
2022-05-03 18:08:22 +0000 UTCHello! - just downloaded v1.13b and a little confused by the install .pdf - note I have the "marketplace" version - from the install instructions I have 3 steps "-" with the community folder file then "2/" and "3"/ - for the market place version do I need to follow all 3 steps? also is the aircraft folder located in the "official" folder which is next to my "community" folder? (note i have the steam version of MSFS)
mac
2022-05-03 18:00:33 +0000 UTCGetting rain noises despite there not being any rain around
dipperdolphin
2022-04-28 11:26:53 +0000 UTCUse the "v1.13b"
K AKAIO
2022-04-24 22:22:53 +0000 UTCSo if I put the "aerosoft-crj" aircraft folder is inside the \\Official\Steam\ folder the CRJ no longer shows up in my sims aircraft selection.
Marcus Key
2022-04-24 14:01:37 +0000 UTC1/ Make sure the Default Aerosoft sounds are working fine ( without the sound Mod ) 2/ install the "FS_CRJ_Sp(v1.13)" => Move "CRJ_SP" inside the Community folder and do not Remove or Rename anything
K AKAIO
2022-04-21 22:20:36 +0000 UTCNo switches sounds for me with the msfs marketplace version. the Sound pack files instructions were followed with my crj being in the official folder. Not sure what's going on.
Brandon M
2022-04-21 01:05:10 +0000 UTC- Did you installed the "v1.13" or the "v1.13b" ? - is the "aerosoft-crj" is inside the "Community" or the "\\official\xxxx\" folder ?
K AKAIO
2022-04-14 00:07:34 +0000 UTCnot sure but i think that is the "Community" folder , Usually you will find all Asobo Aircrafts and Airports inside the "\\official\steam" 👉try to install the "v1.13b" release if you still have a Problem
K AKAIO
2022-04-14 00:05:36 +0000 UTCSame here no sound on switches
Glockman40
2022-04-13 02:28:37 +0000 UTCMy official install directory is D:\Aerosoft One Library\Add-ons\msfsSteam-f956-AS15238\gameDirectory~Community\aerosoft-crj . Is this not the same as "\\official\steam" ?
buffchip
2022-04-11 09:03:06 +0000 UTCI also have the problem of not being able to hear switches.
Joao
2022-04-08 10:13:49 +0000 UTCsame for me
Alex
2022-04-05 10:16:57 +0000 UTCI'm using the Aerosoft store version and I also can no longer hear buttons or switches after installing the 1.13 pack, after going back to version 1.12 I can hear them again.
Marcus Key
2022-04-05 00:32:06 +0000 UTCI am having the same issue, also non-Aerosoft store version.
Thomas Roth
2022-03-31 03:05:49 +0000 UTCIs there going to be a "non-Aerosoft Store" version? Using this version, I've tried both the new install method as well as the old install method. In both installs, I'm getting some sounds, but not getting sounds for switches, APU, etc. Followed the same process as in previous versions.
Mark Proust
2022-03-30 23:11:40 +0000 UTCThe Callouts are the Default ones of Aerosoft , they Can not be edited 😕 . The only way is to Disable them and adding new ones and i think they will not be seemeless to the Default TCAS GPWS sounds 👉 Try to Reduce the Volumes of the other sounds ( Engines , Avionics , Wind )
K AKAIO
2022-03-13 12:13:16 +0000 UTCHi, any chance to increase the callouts volume?
Andra
2022-03-13 08:24:50 +0000 UTCYes Yes , forgot to mention that on the instruction .
K AKAIO
2022-03-12 17:21:20 +0000 UTCWith the beta, is it like the Twotter, where you have to move it to the "Official" packages section? Or does the actual plane stay in community?
Rayne Forsyth
2022-03-12 01:35:45 +0000 UTC1/ After installation you must have those 3 files ( "Aerosoft_CRJ.PC.PCK" , "CRJ_Sp.PC.PCK" & "sound.xml" ) inside : "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000" 2/ Still no Sounds ? then it Must be the "Layout" file found inside "aerosoft-crj" is not updated successfully a) Try updating again with a different Tool , "MSFSLayoutGenerator.exe" or "build.py" b) Try updating the "Layout" file Manually using the Tutorial added Below "# Notes"
K AKAIO
2022-02-13 20:04:19 +0000 UTCHey I have no sound when I loaded in.
Chase Sawyer
2022-02-12 01:58:09 +0000 UTCSure 👌 , BTW that is a Loud Takeoff on the Video
K AKAIO
2022-02-05 20:36:45 +0000 UTCAny chance to change specific for CRJ roar sound like in my YT movie at 0:24? https://www.youtube.com/watch?v=cX4AbdGhz1A
Mariusz Kalinowski
2022-02-05 14:39:22 +0000 UTCDid you Make a copy of the "Aerosoft_CRJ.PC.PCK" file from : "aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_550\sound\" then Paste it inside : "CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550\sound\"
K AKAIO
2022-02-02 21:34:31 +0000 UTCAfter I installed the sound pack I have been unable to hear any of the sounds that the switches make
Mateo Skinner
2022-01-30 18:13:55 +0000 UTCI figured it out I missed understood a step. Awesome sound by the way.
Glockman40
2022-01-21 23:22:36 +0000 UTCDid you copy the "sound" folder from "CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550" and Paste it inside : CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700 & CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900 & CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000 💡 Step n°2/C
K AKAIO
2022-01-21 22:25:39 +0000 UTCI'm only getting mod sounds for the 550. I've been through the steps several times with no luck.
Glockman40
2022-01-20 19:20:52 +0000 UTCGood 👍, why are you keeping the first message then 😖 . The main problems always are : 1/- "Layout.json" Not updated successfully by using any of the 2 tools provided ( it can be also updated Manually ) 2/- MSFS not restarted (if Running ) after updating the "Layout.json" file 3/ Missing "sound" folders inside CRJ700 / 900 & 1000
K AKAIO
2022-01-12 21:07:23 +0000 UTCIts not working? Im pretty sure i installed it correctly. NEVERMIND works now! Sounds amazing! Good job!
Micha Pommes
2022-01-11 17:18:22 +0000 UTCThe install tutorial ( with Screenshots ) is inside "INFO.pdf" . instruction divided into 3 steps , - The first 2 are just coping files - The last Step is for updating a configuration file "Layout.json" , it can be done by using any of the 2 tools provided "build.py" or "MSFSLayoutGenerator.exe"
K AKAIO
2022-01-10 21:46:23 +0000 UTCis there an easy way to install these sound files? It seems a bit complicated for someone who isn't familiar with code..
Edward Smolinski
2022-01-10 00:01:40 +0000 UTC1/ restore the original "layout.json" file if you have a backup copy , if you don't then re-install it and create a backup 2/ Follow this tutorial : https://www.patreon.com/file?h=52857385&i=9726631
K AKAIO
2022-01-06 14:58:38 +0000 UTC1/ Create a backup copy of the Aerosoft CRJ "layout.json" file , 2/ Follow this tutorial : https://www.patreon.com/file?h=52857385&i=9726631
K AKAIO
2022-01-06 14:56:24 +0000 UTCThe aircraft dissapears once installed (done as per instructions) and have to reinstall in the content manager, This pack wont work succesfully for me.
Kristopher Richardson
2022-01-05 20:27:46 +0000 UTCdoing what is asked to do in your instruction file and therfore the plane doesn't show in the sim
Thibaud
2022-01-03 15:43:39 +0000 UTCI have the same issue.
Ryan Naylor
2022-01-02 02:41:52 +0000 UTCis there an updated install instruction on how to install the sound if you have the market place version. I did all of the steps and no sound
John Doherty
2021-12-31 01:09:59 +0000 UTCinterior Flaps Noises are reduced on the latest update ( Was too loud ) , Now it only can be heard clearly on the Wing View
K AKAIO
2021-12-18 18:37:57 +0000 UTCWith the new update I seem to no longer be getting Flap Sounds. I'm not really sure why. We're they turned down to barely audible, or is it an issue with the sound pack?
Robert
2021-12-18 18:18:05 +0000 UTCMarketPlace version ? - Try only to rename the Aerosoft sound folders and copy the ".PCK" file ( no need to update the "layout" file ) Aerosoft shop version ? - Try updating again the "layout" file using a different method ( shown on the "INFO.pdf" )
K AKAIO
2021-12-17 15:52:45 +0000 UTCI am not entirely sure what I did wrong, I have followed 100% but my aircraft no longer show up!
Owee-Wan Kenobi
2021-12-17 03:41:18 +0000 UTCThis update is absolutely magnificent
Kenneth Tjonasam
2021-12-16 19:54:50 +0000 UTCYes the values was reduced for all Sounds , is your problem only on the Startup ?
K AKAIO
2021-12-15 19:16:13 +0000 UTCEngine tweaks are amazing! One question: Have you tried lowering the "3D Panning" effect value for the startup sounds yet? You once said this could solve the sounds only playing on the respective L/R speaker. If you tried already, it didn't seem to help unfortunately.
MediocreGorilla
2021-12-14 23:08:54 +0000 UTCThe cockpit Levers/switches sounds are the Default ones from Aerosoft ( currently trying to include new ones on the sound Mod ) On the latest update (v1.12) - Flaps sounds are reduced - Spool sounds ( Not Buzz-saw) are a bit louder on takeoff
K AKAIO
2021-12-14 21:32:52 +0000 UTCWill You do some upgrade in future? I see some issues here ;) Flaps in my opinion are too loud, in real it is very quiet. Spoilers lever is heard in wingview, it shouldn't. Spool sounds should be louder, gyro is too loud. I saw You did some new version for Xplane with new sounds for it. Will You do it here too? :) Thx
Mariusz Kalinowski
2021-12-13 09:13:04 +0000 UTCNew update almost ready and The Gyro sounds will be removed
K AKAIO
2021-12-12 18:25:39 +0000 UTCThe gyro lines that need to be deleted are not clear at all. What exactly do we delete? The "....." could mean several things. What do we do about the spaces left over?
Dash8Demon
2021-12-09 20:06:46 +0000 UTCHere is a video showing what I mean during the taxi and takeoff - https://youtu.be/uxinv2fhNJg
Chris D
2021-11-25 20:52:36 +0000 UTCHey Guys, great work on the CRJ900/1000 - couple of suggestions: - Be cool if there was a "recirc fan" sound, and internal sounds from hyd pumps. - Also, the initial spool on ground from idle -taxi thrust seems too loud/sounds like takeoff buzzsaw - this should be more of a low freq drone I think? Great job though :)
Chris D
2021-11-25 16:23:35 +0000 UTCinstruction is added above 👉 # Notes :
K AKAIO
2021-11-21 15:06:46 +0000 UTCHi , did you follow the instruction inside "INFO.pdf" ?
K AKAIO
2021-11-21 15:05:41 +0000 UTCThere is no Sound.xml in 700/900/1000. Folders are just empty
Tim-Cedrik Schmitz
2021-11-21 13:52:38 +0000 UTCI think the gyro is still to loud and what about callouts? They are too quite. ;)
Mariusz Kalinowski
2021-11-20 23:41:02 +0000 UTCThe Gyro noises was reduced a bit , but You can disable it completely by removing this Parameter ( Lines n°178 ... 180 ) 👇 Sound WwiseData="true" WwiseEvent="CGyro" ..... Range LowerBound="20" /> Sound>
K AKAIO
2021-11-18 20:27:45 +0000 UTCI did and I have no sounds now?
DJSean00
2021-11-18 09:20:25 +0000 UTCThanks for the update. Quick question: if i have the 1.1 version do i have to follow the whole installation process again ?
Enzo Lucignano
2021-11-18 09:09:04 +0000 UTCThanks! Just a quick question about removal of the Gyro noises... I don't see the old parameter in this xml file, but I do see this new parameter: at lines 178-180 (tried to include it, but it won't let me) Should I remove this to remove the Gyro noises? Or, have the gyro noises been updated/reduced and this string should be kept? I'll keep it for now till you can confirm. Thx again :)
Mark Proust
2021-11-17 23:31:37 +0000 UTCAs always great work from you, thank you very much!
SockelMania
2021-11-17 19:08:29 +0000 UTCThank you so much!! These new sounds are phenomenal!!
Liam Montgomery
2021-11-17 18:47:49 +0000 UTCThanks!!!
DJSean00
2021-11-12 20:06:56 +0000 UTC:(
DJSean00
2021-11-11 10:53:05 +0000 UTCI did some testing tonight and the current sound pack is definitely not compatible :(
Liam Montgomery
2021-11-11 07:12:47 +0000 UTCI was just about to post!
Liam Montgomery
2021-11-10 23:59:57 +0000 UTC900/1000 expansion just released. @FTSim+ can you please check the compatibility from your side?
SockelMania
2021-11-10 20:56:33 +0000 UTCReally love the immersion factor with this new sound pack. Makes the CRJ so much more realistic!
JWL246
2021-11-10 14:35:08 +0000 UTCwill reduce the Settings value of "3D Panning" effect , i thinks it is the main issue 👉 "3D Panning" effect is a Parameter that help mix the "Left" and the "Right" sound channels , ("High Settings" Example : when you look left you will hear the "Left" sounds louder and the "Right" sounds will be muted )
K AKAIO
2021-10-27 18:38:57 +0000 UTCLoving this one, adds an incredible amount of value to the aircraft! One thing I've noticed: When in wingview, the startup sounds are fixed to their respective side, meaning: Looking at the left wing from the cabin while starting engine no 2 results in the startup sound playing from the right speaker, so the sound comes from the front of the cabin. Same for no 1 on the left speaker. Is that something you can refine? :)
MediocreGorilla
2021-10-27 14:46:55 +0000 UTCsure !
K AKAIO
2021-10-24 18:52:00 +0000 UTCReally incredible package, makes the CRJ so much more enjoyable and realistic.. Only problem is there is no sound when the mains touchdown, just silent. Any plans on adding in a touchdown sound?
Anthony A
2021-10-24 17:41:42 +0000 UTCNo sound in Both CRJ 500 and 700 ? 1️⃣ After install you must find those 3 files - sound.xml - Aerosoft_CRJ.PC.PCK -CRJ_SP.PC.pck inside : "CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550\sound" and inside : "CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700\sound" 2️⃣ Did you rename both "sound" folders that are found inside : ...\\Aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_550 ...\\Aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_700 Exp : the "sound" folder is renamed to "sound.1" 3️⃣ is the Aerosoft_crj "layout.json" file is updated correctly using "build.py" or "MSFSLayoutGenerator" 💡 to check if the layout file is updated or not ! a) open the "layout.json" file with a ".txt" editor b) look for the new name of the "sound" folder ( Exp : "sound.1" ) If it is found then the "layout.json" file is updated ✅
K AKAIO
2021-10-16 21:15:29 +0000 UTCI have no sound whatsoever and I followed the video exactly. password was copy pasted directly from this page with no quotes
David Horgen
2021-10-15 22:49:15 +0000 UTCwhy not ! , maybe it will be made next update 👍
K AKAIO
2021-09-25 15:05:22 +0000 UTCAre you planning to do switch sounds for the CRJ? The aerosoft ones are terrible :D Otherwise very good soundpack!
Lauri Salonen
2021-09-23 19:38:41 +0000 UTCit is the Gyro noise 🧭 , Was Noted on the "INFO.txt" file for how to disable it if you want 👇 ==================== 4. NOTES ==================== 1/ To Disable the "Gyro" noises : - Open the "sound.xml" with ".txt" editor - Delete this Parameter ( Lines n°212 ... 214 ) Sound WwiseData="true" WwiseEvent="CGyro" Continuous="false" NodeName="ASCRJ_PFDC_BRT" ........... > Range LowerBound="24" /> /Sound>
K AKAIO
2021-09-18 11:34:13 +0000 UTCI have the same problem Mark Proust has with the constant clicking noise. Here is a video clip: https://youtu.be/PAQvLNDe4nM
Robert
2021-09-18 02:57:57 +0000 UTCI think you should do one more understadable......For beginner user the video goes to quick. Also i´ve tried to join your discord. How we do that .I´m connected through patreon and what should i do more ? Thanks.
Philippe
2021-08-27 03:16:00 +0000 UTCDid you watch the video tutorial ? : https://youtu.be/H5JFkWLziwE
K AKAIO
2021-08-26 22:34:03 +0000 UTCYous say "drag and drop the layout.json into the MSFSLayoutGenerator.exe. How to do that ? If i run the MSFSLayoutGenerator.exe, i can´t drop the layout.json in it? I´m a bit lost at the point. Thanks in advance for the support.
Philippe
2021-08-26 19:41:03 +0000 UTCHi everyone. I´m new here
Philippe
2021-08-26 19:39:21 +0000 UTCIn my opinion, yes such that the volume of the engines "decreases" or drowns out after crossing 250 KIAS. I recorded a video here: https://youtu.be/JOqNz3nZ1yE. You can see my TAS is above 400 yet we can still hear the "buzz" of the engines in the background. When I increase/decrease the throttle so does the buzz which is audible. It would be great if you could work on this! Reall enjoying your soundpack until now
Chirag Abichandani
2021-08-18 03:59:07 +0000 UTCThe same effect it is also enabled here on the CRJ , you can hear the difference better when Passing "Mach 0.7" or 400 Knots in True Airspeed/Ground Speed
K AKAIO
2021-08-18 02:01:40 +0000 UTCHi could you please work on removing the engine sounds as the wind sounds pick up after 10,000 or acceleration? They are still audible in cruise. This is present in most of your XP11 soundpacks
Chirag Abichandani
2021-08-17 20:24:38 +0000 UTC1/ Can record a short Demo video showing the issue ? 2/ No Flaps deploy sound are added yet but the original are not disabled !
K AKAIO
2021-07-22 15:25:05 +0000 UTCSo I downloaded the file and followed the instructions but not sure if I did something wrong so maybe you can help: 1) when the aircraft is running, the air makes almost a constant rattle-like sound. As if some paper or steamer is attached to the fan blowing in the wind… is that normal/intended? 2) I have no flap sounds… the just extend/retract silently. Let me know what you think when you get a chance. Thanks!
Mark Proust
2021-07-22 14:55:16 +0000 UTCof course 😊 , will add other Cabin ground Roll samples
K AKAIO
2021-07-21 21:43:06 +0000 UTCI absolutely LOVE these new sounds! The aircraft feels so much more real. Would it be possible to increase the ground roll sounds a bit? Every CRJ I've ever ridden in sounds like a box of loose bolts lol. That's my only real suggestion!
Liam Montgomery
2021-07-21 03:48:59 +0000 UTC- Maybe wrong Password ? or "Space" added ? : "MFSiM-Sounds" ( Copy & Paste without quotes ) - Try Using a diffirent Archiver Program like "Bandizip" or "7zip"
K AKAIO
2021-07-13 16:18:54 +0000 UTCIt appears that the CRJ sounds downloads are corrupted. Can you guys look into this? No issues with the other downloads.
Dennis Mullert
2021-07-13 12:15:29 +0000 UTCDidn't add any Hydraulic sounds yet for the CRJ , soon will do
K AKAIO
2021-07-08 17:19:55 +0000 UTCCan you make the hydralic sound louder in the cabin? https://www.youtube.com/watch?v=oaCjrI3ejZU&t=106s
Bryce
2021-07-08 16:05:56 +0000 UTCA New install format will be added soon and it will work fine with both "marketplace" and "Aerosoft Store" versions .
K AKAIO
2021-06-29 17:57:19 +0000 UTCthis sound mod require the default Aerosoft sounds to work , just restore the "Aerosoft_CRJ.PC.PCK" file then it will be fixed
K AKAIO
2021-06-27 08:37:26 +0000 UTCHi, I put in the sounds and used the layout generator. I deleted the Aerosoft sounds and put in yours in the aircraft folder along with the xml. Even though the plane shows up in sim when loading it up there are no sounds in sim. I have cross checked that the entries for CRJ_SP_PC.pck are in layout.json, and they are. Any solutions? Update: Restarted my computer and sounds are working, but inly engines/gyros. No switch/knob/warning sounds. Is this right? If these are not included in the sound pack, are we supposed to keep in the original AEROSOFT_CRJ.PC.pck in the sound folders?
Chirag Abichandani
2021-06-27 00:27:02 +0000 UTCi notice that on the Carenado , though this "Encryption" stuff is added only for the Asobo Legacy aircrafts . But if you tried the files above and still not working then will have to rework the sounds it to be like the B787 version ( Stand Alone )
K AKAIO
2021-06-26 22:21:59 +0000 UTCThanks for your support. Here is a quote regarding this issue from Aerosoft/CRJ forum: "Ok let me help. When you buy ANYTHING from the market place, they add a DRM layer on top of the standard files. This is downloaded to your computer in an encrypted format. When you call the add on into the sim (like choosing to fly the CRJ) the files are decrypted by the sim and things run. When you buy direct from the publisher/developer, you will get the files in the manner in which they intend you to get them. In the case of AS, you get the unencrypted files. If someone makes a mod (authorized or not) and you install it, you are doing so at your own risk and responsibility to trouble shoot. This can include liveries too as many that can be found will cause problems with add on planes. This sound mod being spoke of, was it shown to work with the update that Asobo just pushed out? That is one thought. For anything deeper you must go to the source, either Asobo for market place purchases or whoever made the sound files. "
Seth
2021-06-26 21:43:16 +0000 UTCSorry for delay , Can mention the names of the ".fsarchive" files ? ( found inside : \aerosoft-crj\SimObjects ) menwhile try this : - Make a bakup of the Aircraft folder ( make a copy or add to zip file ) - remove the ".fsarchive" file that have the smallest size - extract and paste those files https://drive.google.com/file/d/1ncoDD9GLH5QqvMJNjdNPrBdiyHTzUeYs/view?usp=sharing - update the layout file again with the ".exe" tool >> if the aircraft not showing try to remove the next smallest ".fsarchive" file & update again !! Still nothing then will buy again the Package from the marketplace
K AKAIO
2021-06-26 21:08:25 +0000 UTCJust checked Aerosoft forum: https://forum.aerosoft.com/index.php?/topic/161943-add-soundxml-file-in-the-msfs-store-version/&tab=comments#comment-1030981
Seth
2021-06-25 22:44:52 +0000 UTCSo you bought 2 times CRJ? this is ultra weird issue as Aerosoft sent the same files to Market place.
Seth
2021-06-25 22:39:57 +0000 UTCFigured it out. The MSFS marketplace files have something wrong or missing. I purchased from Aerosoft, and there was an extra file in the sound folders. Installed per instructions above and voila. Never buying another aircraft addon within MSFS...
Bryce
2021-06-25 20:08:06 +0000 UTCThis is updated layout.json file. Is it normal to have Aerosoft default sound + Ftsim sound entries? { "path": "SimObjects/Airplanes/Aerosoft_CRJ_550/sound/Aerosoft_CRJ.PC.PCK", "size": 59296300, "date": 132674513919150775 }, { "path": "SimObjects/Airplanes/Aerosoft_CRJ_550/sound/CRJ_SP.PC.pck", "size": 154871626, "date": 132689554064949649 }, { "path": "SimObjects/Airplanes/Aerosoft_CRJ_550/sound/desktop.ini", "size": 46, "date": 132674513872413887 }, { "path": "SimObjects/Airplanes/Aerosoft_CRJ_550/sound/sound.xml", "size": 41553, "date": 132689556180756820
Seth
2021-06-25 19:53:56 +0000 UTCDo you have an older version of the CRJ?
Bryce
2021-06-25 14:51:44 +0000 UTCIt worked for me just fine.
Thibault
2021-06-25 14:29:12 +0000 UTCNot working for me either, same issue.
Bryce
2021-06-25 01:26:02 +0000 UTCAircraft not showing = something wrong on the "layout.json" file or it is missing - did you use the "MSFSLayoutGenerator.exe" ? if the issue still exist ! 1/ restore the Default "layout.json" from your backup copy 2/ open the "layout.json" with a ".txt" editor and Paste this entry below "content": [ { "path": "SimObjects/Airplanes/Aerosoft_CRJ_550/sound/CRJ_SP.PC.pck", "size": 113187139, "date": 132684342887981342 },
K AKAIO
2021-06-24 21:53:58 +0000 UTCAfter CRJ sound Mod installation, aircraft is not visible on MSFS. Do i have to place sound files in both aircraft editions ( 550 & 700) ? -Update: Placed sound files in both editions and still its not working. Thanks
Seth
2021-06-24 20:32:30 +0000 UTC
