B737CFM_SP (X-Plane)

thanks a lot 👍 , this was very helpful

K AKAIO

checked and it should work fine , only the takeoff alert was missing ad it is fixed

K AKAIO

fixed

K AKAIO

I get the following BE ADVISED Couldn't find a GUID for this event name! event:/model/B737/cockpit/annoucements/crew/FA_cockpit/leo Check sound banks under this folder: Aircraft/B737-800X/fmod/ This is with adding back the zibo PA announcements obviously. Most recent Zibo release from .to and latest XP12 version.

Kien Houk

Hey, using the Levelup 737, most recent version, have no fire, TCAS or Takeoff config sounds. I have tried some of the older versions of the soundpack and still nothing, tried turning alerts volume to 10 and nothing.

Kotaro Jujo

Couple of observations that bother me: 1. TCAS Test sound flow has been completely removed. In the real 737, at the very least you'll hear either a "TCAS Test, pass" or "TCAS Test, fail". In this pack, it's completely silent. 2. GPWS full test a. Whoop whoop for windshear warning? Pretty sure that should be the two-tone warning followed by windshear, windshear, windshear b. "Terrain, terrain" is cut off and ends with "n n. Pull up" c. "Approaching minimums" then directly moving to 50 ft callout. Then silence for a good 5 seconds. I know this largely depends on airline gpws configuration, but it should start with 2500 all the way down to 10 for default d. The last parts of the test - the obstacle sound test, it is cut off "Obstacle ahe - obstacle ahe - obstacle ahead, pull up". Pretty sure it should be "obstacle. obstacle. Obstacle ahead, pull up" or "obstacle. obstacle. obstacle obstacle, pull up" depending on airliner config. I have video recording if needed to demonstrate the inconsistencies I've noticed

Kenny G

Installed it just now and encountered the same. PA sounds are very loud compared to stock Zibo

Colin M

I do not have any GPWS callouts with this mod

Eyeofthetiger

Leave the fasten seat belt sign on for the whole flight. Oh, you mean in the sim. :-P

ryanov

LUA error when trying to use 1.82. Install instruction don't make sense - replace zibo fmod with sound pack version, then overwrite it with default sounds??

Uwajimaya

actually disregard I found the dummy reason why it wasnt working, headset wasnt on

Nick Gresla

hello, I hope this message finds you well, I am having trouble getting the soundpack to work with the level up 737, I read the info file and renamed the fmod folder as the instruction said but when I open up the sim and turn on the battery there are no sounds at all, I guess my question is what am I missing. I installed both versions 1.81 and 1.79 unfortunately no luck

Nick Gresla

did install it on actual Zibo, works really fine und sounds are amazing, BUT ! is there a way how to disable this damned toilet sound ? xD

Sven Woddy

anyone else experiencing issues with the fire alarm and thrust lever config sounds not working?

Manuel Cassar

This needs an updateee

Benedict Davies

Still needs an update. Sounds good in cockpit but the cabin is really quiet

Jevan Dean

This sounds accurate great job. My only critique is that they're pretty quiet gotta turn my speakers wayyyyy up to hear the engines. Any possible tweaks you could make to where it's louder? Other than that this is a job well done

Jesse Gervais

Works with latest Zibo now!

Trev NG

An updated engine only mod for zibo would be amazing!

Kris

Still needs work, when i add the Zibo PA announcements, it doesnt include music and the announcements play in the cockpit at volume 12/10.. way too loud, and it doesnt seem like any slider adjusts the volume of them.

Kris

not working on latest version of zibo

Sam Alcalá

Still having issues with latest Zibo version. Notably fire bells don't work at all, along with other sounds missing or levels feeling "off".

Caleb Mantik

Having issues with latest Zibo version

Jevan Dean

Not working on the latest zibo version

Trev NG

Hello, is it possible we get a version with only the engine sounds? im having issues with the interior sounds

Lendercl

I really line the overall soundpack, but the trim's sound is weird. Is it possible to keep the trim as in default zibo, with all the nice sounds from you? Maybe you should include a "default trim" like the "zibo pa". It would make the 73 really enjoyable, I don't know how others feel about it.

Kovács Gábor

the trim sound is a little weird, it gives a clicking sound (if you hold the button) and also the engines buzz sound is quite low until above 50-60 % in the cockpit. The seatbelt and smoking signs are off also! would it be possible to get an engine only mod for the latest zibo? thanks

Kris

checking ...

K AKAIO

Kris

these sounds lack the GPWS voice "minimum" approaching in minumum doesn't say it. dice only plus hundred. moreover at the "minimum" altitude it does not make any calls. the GPWS is not complete

Nicola Facione

Can you fix the sound bank for the level up 737 in Xplane 12. I keep getting this error that says event:/weather/ThunderFX it is for every 737 variant that is causing an issue.

Jess

check the "PA VOLUME" on the Tablet and check the "User Interface" volume of x-Plane

K AKAIO

Can you make the avionics sound louder in the NG series, please? when I turn on DC and AC I can only hear the rattle, all sound slider are at max, thank you

Alex1985

i add sound pack cfm, but sound trim is bugged.. dont work! because in the default sounds it is there and in your 1.79.2 modifications it is not. it seems strange

Nicola Facione

Hi, it would be mega to get an engine only pack for Zibo in XP12. Are you waiting for it to come out of early access? thanks

Kris

1/ Volume : - The Preferred Volumes is = 10 2/ conflict : - No clue 😕 about this issue 💡 The new Lua scripts are "Read Only" mode and they will not change any behavior of the Aircraft Parameters (Datarefs) 3/ Loud exterior is this happen when using the "Enable PA" of the Default Zibo ? If Yes ! ; 👉 there is no Fix for this for now but you can disable the Truck sounds ! and keep the PA How ? - Open the fmod files "b738.snd" and "b738_4k.snd" - Delete the lines below this section (found on the bottom ) ################## # EXTRAS ################## # DE-ICING # DE-ICING ❌Delete the lines❌

K AKAIO

It was set to 5, more importantly, when installing the soundpack the plugin folder had a conflict that made the fligth directors unusable (tested before-after-rollback), plus when using the full package, there is a problem where from the cockpit external sound are super loud (trucks passing by especially)

Giordano Corradini

check the "ENGINE VOLUME" slider on the Zibo Pad

K AKAIO

Hi, can you check the the zibo 2.9 / 3.0? I can't hear any engine sound from the cockpit, i tried Engine only + CfgFix but it doesn't work (I've been using this sound packs for years without problems)

Giordano Corradini

it was an issue with the Default Zibo sounds , Try this Configuration : https://www.patreon.com/file?h=33035535&i=12576257

K AKAIO

I get this issue when installing the Engines only zibo sound pack? https://i.imgur.com/jlbt6cO.png

Jordan

try it the editing above and check it did fix the issue . 💡 The ".snd" file to edit are : 737_9ENG 737_6NG 737_60NG.snd 737_70NG.snd 737_80NG.snd 737_90NG.snd or you can edit only the one you use

K AKAIO

I understand that, like it sounds like the speedbrakes deploying every time I throttle up, which understandably gets annoying after a long taxi.

Caleb Wood

You want to disable the interior Hydraulic sounds ? - Open the fmod file(s) ".snd" with NotePad or similare program - Look For : "Dynamics/Hydr" - Delete this Parameter shown below BEGIN_SOUND_ATTACHMENT EVENT_NAME /Dynamics/Hydr VEH_XYZ 0 0.5 2 EVENT_START_COND sim/cockpit2/hydraulics/Hyd_Pump == 1 CUE_TRIGGER_COND sim/cockpit2/hydraulics/Hyd_Pump == 0 END_SOUND_ATTACHMENT - Save and Reload the Aircraft

K AKAIO

How do I remove the constant sound of the hydraulics when throttling up on the Levelup 737?

Caleb Wood

Would love to have the v1.78 engine start sounds again, the new one in v1.79+ sounds like older versions instead.

Asher Pramono

Yes, on 10

Asher Pramono

"Only Engines" is now added in a separate Mod (v1.79.2)

K AKAIO

Fixed ✅

K AKAIO

Zibo GPWS Volumes are High ?

K AKAIO

Hello Sir, I read that "Fixed Gyro & TRU sounds ( Was Always ON even Battery is Offline )" was fixed in the XP12 version of the soundpack. Could this also be fixed in the XP11 version of your soundset please. I have this Gyro and TRU sound in cold and dark state with your soundset v1.79 (XPL11). I am using the latest zibo mod 3.54.17 (XP11). Thank you sir

Zandluze1

Would you guys be able to check the instructions for the 'Engine Only'? I've tried carefully installing them twice and both times got a crash saying 'Couldn't find this GUID in any sound bank'. I can send my Log file if need be. This is on the Zibo with your sound version 1.79

David Kavanagh

Overspeed, TO/Cabin altitude warning, Fire alarm, TCAS test, gear warning, and GPWS test does not work on v1.79.1, with the knob fix (Zibo XP12 early access latest version)

Asher Pramono

use this configuration : https://www.patreon.com/file?h=33035535&i=11848070

K AKAIO

thanks 👍 this will help , i did check it out before the update but i did not get any clicking noises

K AKAIO

The clicking noise happens when the speed tape switches to Mach mode from IAS. Seems that the way zibo works is it makes constant adjustments to the mach and as it does so you hear a constant clicking. Once it's fixed onto an IAS again it goes away.

Kieran Harvey

a mistake on the instruction + a bug found when checked 👉 fix will be ready asap

K AKAIO

New Fix added for the XPL12 version

K AKAIO

I LOVE the update! Really well done

Poki Beau

V1.79 engines only gives GUID error with latest zibo XP11 3.54.17, tried a fresh install twice!

Kris

not yet , soon it will be reworked so it can be compatible

K AKAIO

Is there any compatibility with xplane12?

Y JIN

"Only Engines" configuration was made for the Zibo Mod only , soon it will be made for "LevelUp"

K AKAIO

when i try to do only engines for Levelup it gives me error for GUIDS. How do I get only engine for LU?

Ryan Klempin

only the "User Interface" X-Plane volume is controlling the PA sounds , ( checked "Boarding" noise and seems ok on the Cabin )

K AKAIO

For Laminar???

Michael Ward

check the "PAX VOLUME" on the Zibo Pad

K AKAIO

Very Sorry 😞, Too much work this Month 😖 and many ... many old Requests still not fulfilled . still trying the best , almost every day a new update or 2 is published ( usually an new fix or update may take +3 days to be ready ) . Sometimes the comment are Read but not replied to , 👉 the Reply will be the new update . Sorry again and feel free to stop Supporting us anytime you want 😊 .

K AKAIO

How do I make the PA announcements louder? They just a little soft.

Michael Ward

ukflyer

1) Louder Flaps in_Cockpit ? or just the Cabin ? 2) Sure it is the Air Speed knob ? , will check it out .. 3) oxygen test noises will be reduced 👌

K AKAIO

you want a version for the Default Laminar 737 ?

K AKAIO

ukflyer

Would like more prominent flap sounds and also for the speed selector to stop ticking during cruise altitude please! The oxygen test is also way too loud

Poki Beau

fine thank you 😊 , will check them out 👌

K AKAIO

Hello, how are you? I would like to know if the alarm sound part works well, since none of it works from the fire fault test as well as the GPWS (Terrain) test. Speed ​​test and also the stall. I follow the installation steps to the letter, any help would be nice, thank you very much!

Luciano Lucero Suppa

Gyro start With the Battery Power , You will hear it clearly when the Avionics Fans are offline .

K AKAIO

Gyro ? , Mute it's volume using the Zibo Pad

K AKAIO

The gyro clicking happens even when the plane is powered down. Is that supposed to happen?

Ian Dougherty

Is there a way to stop the clicking noises in flight

Nick Buick

Will this work for the most recent zibo mod?

Ian Dougherty

will do , you will be notified when the configuration is ready

K AKAIO

Hi man, thanks for the sounds! i use engine only on zibo, wondering can you add the new sounds when you call the fuel truck "hose connected, started refuelling" etc. and also the new rad alt callout for 5 feet? It seems to not work, maybe just needs added to the config! thanks!!

Kris

already works with the level up 737-600,700,800 & 900NG

K AKAIO

You should make it for the level up 737

Jess

https://photos.app.goo.gl/NHyhw71VqVpV9R4z9

K AKAIO

this is the error i get after performing steps on video which follow instructions hope this helps

Wally Medrano

Hi a video of my install https://share.icloud.com/photos/001fSTrxiIDaISVt6VeC-d0fw

Wally Medrano

https://drive.google.com/file/d/193WK6-PvqzRg7xKSskV2_Vza7930Dr2S/view?usp=sharing

Wally Medrano

https://drive.google.com/file/d/1dSlHFTYWZD_9dm2hj3Sz4bpdx7-7atXY/view?usp=sharing

Wally Medrano

will do one last question to confirm your using version v1.77 right?

Wally Medrano

Please make 2 screenshots showning the content of the "B737-800X" folder and the content of the fmod folder . You can upload the images anywhere and paste the link here or Send them to kairivindrix@gmail.com

K AKAIO

Yes I have followed the steps to a tee. I’ve gone as far to research the guid line missing it’s as I described in original post

Wally Medrano

You need also to copy those files from "fmod1" and paste them inside "fmod" - V_1.bank - G_1.bank - AW_1.bank - Master Bank.bank ( then rename it to "Master.bank" ) Follow the Screenshots on the INFO.pdf file

K AKAIO

Zibo folder replacing fmod folder. Then rename masterbank to Master.bank and moved along with aw1 v1 g1 and get a guid error the issue is the guid file in default zibo pa. Also the standard new pa sound in all versions

Wally Medrano

I have replicated this issue download FULL Zibo then updated zibo then renamed fmod to fmod1 moved files from FTSim (fmod plug-ins sounds) then opened default pa configuration and moved fmod folder into

Wally Medrano

"Default Zibo" PA Configuration is Tested on B737-800x v3.52.19 and it is working fine ✅ 👉 Make sure that those files are inside the new "fmod" folder - AW_1.bank - G_1.bank - Master.bank ( this is copy of the original "Master Bank.bank" ) - V_1.bank

K AKAIO

I’m sorry one more thing the new pa sounds sound in all sound packs including non new pa configuration

Wally Medrano

it might be something changed again on the New Zibo version 3.52 , Fix will be ready soon

K AKAIO

hi i ran into an issue and have done plenty of troubleshooting. It seems everything works on zibo 3.52.16 up unto you decide to add the configuration for zibo announcements option. You get a GUID error. 0:00:11.232 I/SND: This aircraft is using FMOD in FULL mode. 0:00:11.232 E/SYS: MACIBM_alert: Couldn't find this GUID in any sound bank! 0:00:11.232 E/SYS: MACIBM_alert: f794f1c4-1384-4df2-b04e-67f01cec24d1 i looked up this line in the guid in the base package for this sound mod and its there as well and that way it works. So the only thing i can come up with is the b738_4k.snd and b738.snd under the zibo pa folder must be missing something or something is wrong or its looking for a line in the AW G1 and V1 snd files which by the way i moved per instructions from original fmod set. Ive replicated this in 2 other pcs the interesting if i revert to an older zibo it works

Wally Medrano

Sounds on fire alarm, stall warning, mach warning, and T/O config/cabin pressure warning are a bit delayed + no fuel pump & throttle idle sounds for the Zibo config.

Asher Pramono

on the NG ? , checking ...

K AKAIO

Anyone missing the fuel truck call with this new install? When I click refuel I don't hear the voice anymore.

sLairT Gamer

usually it will work fine on any New Zibo Update

K AKAIO

hello, it's compatible with zibo 3.52.0?

Nicolas Navarrete

yes , the "v1.77(Full)"

K AKAIO

Maybe works on Level Up 737?

Esteban Saldarriaga

i am sure is just another Rotary knob as always 😫 Try This : 1) Open the used ".snd" file with "NotePad" or similar (737_80NG.snd , b738.snd , or .... ) 2) Look for this line : # Rotary ############ 3) Delete those 3 Parameters : BEGIN_SOUND_ATTACHMENT EVENT_NAME /Cockpit/Controls/TFC2 VEH_XYZ -0.1 0.9 -16.3 EVENT_START_COND ABS_DELTA=laminar/B738/autopilot/mcp_speed_dial_kts > 0.5 EVENT_END_COND ABS_DELTA=laminar/B738/autopilot/mcp_speed_dial_kts < 0.1 END_SOUND_ATTACHMENT BEGIN_SOUND_ATTACHMENT EVENT_NAME /Cockpit/Controls/TFC1 VEH_XYZ -0.1 0.9 -16.3 EVENT_START_COND ABS_DELTA=laminar/B738/autopilot/course_pilot > 0.5 EVENT_END_COND ABS_DELTA=laminar/B738/autopilot/course_pilot < 0.1 END_SOUND_ATTACHMENT BEGIN_SOUND_ATTACHMENT EVENT_NAME /Cockpit/Controls/TFC1 VEH_XYZ 0.1 0.9 -16.3 EVENT_START_COND ABS_DELTA=laminar/B738/autopilot/course_copilot > 0.5 EVENT_END_COND ABS_DELTA=laminar/B738/autopilot/course_copilot < 0.1 END_SOUND_ATTACHMENT 4/ Save and Reload the Aircraft

K AKAIO

Getting this clicking sound constantly when in flight, any suggestions? https://drive.google.com/file/d/10jJCtXRpogTHu1vwnujdnyqfYUXQCvde/view?usp=sharing

Logan S.

v1.77(Full) should work fine on the latest Zibo updates

K AKAIO

Does this work for latest zibo or is zibo still locked down?

Matty

is there a fix?

Harbor Brass

Any updates on the fix for LevelUp's 737 pack? The -600 and -900 work, but the -700, -800, -900ER don't. This is because the fmod files are named incorrectly.

Logan S.

Didn't know about that , will Restore the older settings to make the Warnings sounds controlled by the ZIBO "GPWS" volume and un-assign the x-plane "Radio" slider

K AKAIO

Is there a way to adjust GPWS volume by LUA independently of the radio volume? In order to make GPWS loud enough my Better Pushback (who uses the radio volume) has to be deafingly loud

Chris Hargreaves

What did you have to rename? Im not getting any sound either

PilotKyle

In the fmod folder, I think you forgot to add the settings for the -700, -800 and 900ER for the LevelUP 737NG series. That's why I didn't get any sound and had to rename the files.

Eduardo Holanda

will be ready very soon

K AKAIO

yes

K AKAIO

will be ready very soon

K AKAIO

Yes, please. Could you apply these current sounds to the B737-700? Level up? Thank you

Waldo CB

It would be great to see those sounds for the new Level Up series ^^

Alex1985

Are you working on the new NG sound? the default is terrible compared to yours.

Harbor Brass

it maybe a bug caused by a new Zibo update , currently working to fix the issue . Please try the modification mentioned above ( Charlie )

K AKAIO

same here. clicking sound like someone is clicking and holding a knob that keeps turning. also, i hear double ding sounds when i use the fasten seatbelt sign button. that me installing the sound pack incorrectly?

Etienne Le Roux

Zibo team always keep changing parameters 😣 , will add a configuration to disable both "Heading" Knob and the "LNAV" button

K AKAIO

clicking sound still present in flight deck during climb cruise and decent, it goes click for a few seconds disappears then comes back it does this for the whole duration of the flight. this is on the latest version of ZIBO737 also.

Charlie Baker

on the v1.75 ? , when it happens ? how it dose sounds like ?

K AKAIO

I'm still hearing the clicking noise. Any Idea why?

Maxelgg

see the AXP ".pdf" manual

K AKAIO

Could I get some info on what the various numbered announcement packs in the EFB are? I believe this changes them from the Zibo default

Davi Lebow

Gpws : make sure the x-Plane "Radio" volume is 100% oxygen test : will be reduced Zibo PA : try to reduce the volume using the zibo PAD

K AKAIO

Hi im having some issues and the last thing I want to be is that guy that just asks and asks for stuff. On this new update the GWPS I can barely hear, the original Zibo announcements are way too loud, the oxygen test is also too loud, and im not fond of the new Attend sound. Anyway I can replace these in specific with the originals? There are many things I do like however, the engine sounds, the flap sounds, the roll, the APU, the stall warning sounds, the wheel trim sound, mach test sounds, button sounds and clicks. Overall a phenomenal job

Poki Beau

Packs switch must be in "ON" Position

K AKAIO

Can you confirm the cabin packs sounds are working? Overhead cabin knobs are all the way to the left.

Zach

is also the 737U have a similar issue ?

K AKAIO

Old Gpws Configuration i did not notice 😖 Please use this Fix ( extract and Overwrite ) https://www.patreon.com/file?h=33035535&i=9342349

K AKAIO

Thanks for updating the 739!

PilotKyle

Hello thank you for the update. I get the sounds now in the default 737 but i'm hearing 'airspeed low' constantly after take-off and the overspeed clacker (past 240 knots) all the time

ukflyer

1/ To Re-Enable the Default Zibo "PA" and "Copilot calls" use the "Default Zibo" configuration found inside : "B737CFM_Sp_(v1.74)\S-Pack\Enable PA\" instruction are inside "How To Use.txt" and "Zibo PA install.jpg" 2/ Configuration with "Only Engines Flaps & Ground Roll" will be available soon

K AKAIO

Is there a way I can install specific sounds only? For example the engine, flaps, and ground roll? I like everything else about the Zibo, specially the announcements that seem to get replace with this add on

Poki Beau

check the x-Plane "User Interface" volume

K AKAIO

i'm not hearing any cockpit sounds on the default 737

ukflyer

Please use the "v1.78 (Z+)" older version

K AKAIO

use the "v1.78 (Z+)" version , ( Restore the default fmod first if you made any changes )

K AKAIO

Getting no sound at all on 737-700

Ryan Klempin

does this work on 737-900 ultimate?

PilotKyle

simple , just extract and overwrite the folders

K AKAIO

ho to use the fix 1 and 2 please

juergen wandrack

😣 Forgot to mention that All Default copilot calls are already added ( 80 knots , V1 , Rotate , positive rate , 1000_to_go ... ) . You need to use the "Enable PA\Default Zibo\" fmod configuration ( instruction inside )

K AKAIO

Is that something I can do myself, or wait for a soundpack update?

Davi Lebow

Will re-enable the Default ones until getting good samples

K AKAIO

Could the VR and V2 callouts be added?

Davi Lebow

Correction, clicking was persistent through the climb (from FL300-FL380) but in cruise now, no clicking

Seatback Pocket

Getting intermittent clicking above FL300 (Have Fix 1 then Fix 2 installed). It comes and goes for about 3-4 seconds, every 60-70 seconds.

Seatback Pocket

Hi Nick 1/ Cabin Doors will be checked again , Usually you can hear the Door sound when you are closer to the Door 2/ Did you use the "Fix.1" & "Fix.2" ? (it was tested by another member and mentioned that both minimums & app-Mini calls are working 3/ GPWS and Alerts will be louder next time , for now make sure that the "GPWS TCAS VOLUME" on the Zibo Pad =10 4/ "Battery on like" = the Exterior TRU/Battery noises and should be OFF when switching OFF the Battery-Power

K AKAIO

Default 738 ? , thought no one is using that no more . Fix will be ready ASAP 👨‍🔧

K AKAIO

CFM737 v1.4 bugs to fix: no cabin door sound, no "minimum" and "approaching minimums" callouts, "GPWS" and disconnect AP sounds should be more loud, persist of a sound "battery on like" outside the aircraft even if turned off! Thanks.

Nick Buick

i installed both fixes but i do not have any knob sound or engine sound when in the cockpit (default 738) pls help.

Stefan Rahlmann

Noted 👌 , Fix will ready soon

K AKAIO

with "GPWS TCAS VOLUME" on the Zibo Pad (see B737_Sp.pdf)

K AKAIO

Hello, I suffer two issues with this soundpack. First one is that the trim wheel sound sometimes bugs. The second one is lack of sound of the following systems: TCAS, all fire/ovht warnings, Mach airspeed warning tests, and Stall warning tests.

Daniel.

how do i increase the a/p disconnect sound volume

Maxelgg

Use the " v1.78 (Z+)"

K AKAIO

Does this work with the 737-900U

@aaron_from_ib

it still v1.74 , only a 2 fixes uploaded

K AKAIO

To Re-Enable the "Default Zibo" PA You need to Move those file inside the new fmod : - Master.bank ( Renamed from the Default "Master Bank.bank" ) - AW_1.bank - G_1.bank - V_1.bank ( see also the "Zibo PA install.jpg" )

K AKAIO

i got email few weeks ago saying 737 pack was updated... but its still the old one .....

Nick Buick

Got error code "Couldn't load the sound bank! AW_1.bank. Followed all the directions and installed the fixes too.

Stephen

missing door sounds will be fixed soon > v1.74 is for new Zibo mod version ( v3.49 and + ) > v1.78 is for old Zibo mod ( v3.36 ) but it can work also with new Zibo version

K AKAIO

In version 1.74 the engine is at a higher volume, however, some knobs on the door... there is no sound, whereas in version 1.78, the engines are quieter, but it has the sound of kbos and ports.

Lucas Cerqueira

Not sure what changed on the v3.5 , but it will work fine as on the other versions

K AKAIO

hi is this compatible zith zibo 3.5

Wally Medrano

👉 "Enable PA\Default Zibo"

K AKAIO

1/ v1.74(Full) for the latest Zibo 737 Mod version v1.78(Mod) for the Zibo 737 Ultimate and the older Zibo 737 Mod version (v3.47) 2/ Low Volumes ? : Check the Volume settings mentioned on the "B737_Sp.pdf"

K AKAIO

It seems the mod (sounds good), kills all the zibo cabin crew announcements?

Lift&Drag&Stuff

Older releases v1.78, actual version v1.74 ? which one should I download ? Is it possible to make the sound louder ?? the engine sound is low

Lucas Cerqueira

Re-uploading the full pack soon after adding a few other touches

K AKAIO

Is there a reason why the fixes aren't included in the main updated package?

pasiel jorgensen

I deleted fmod and sounds then added soundpack and worked

Nick Buick

I cannot get this installed to save my life...I keep getting an fmod error for masterbank....Ive followed the instructions but still no luck...help please!

Charles Jennings

1/ When dose it accrue ? : After takeoff , when Landing , Autopilot is Enabled or Disabled .... 2/ How dose it sound like ? : a Rotary knob , a Button ....

K AKAIO

I am getting a constant clicking sound that is the same sound as the altitude knob selector on the MCP or pressurization panel. I have tried deleting me B738_status.dat which has not fixed it. This occurs with both the 1.78 and 1.74 versions of the sound pack. Any ideas on how to fix this?

Chris Hargreaves

got it i had everything but the fans on c i had them on auto ty

Wally Medrano

To Switch on the Packs ( APU ): 1/ APU Elect Power is Available 2/ APU Bleed is ON 3 / "ISOLATION VALVE" is "OPEN" 3/ L/R Pack switches on "AUTO" or "HIGH" Position 4 "FWD CAB" and "AFT CAB" Temperature knobs are turned to "C" Position ( Cool )

K AKAIO

hi followed instructions not sure if im missing something. I cannot hear ac or fan noise in cabin when parked and apu is running with packs on even at maximum air.

Wally Medrano

without the new sounds you have also a clicking bug ?

K AKAIO

there is a constant clicking in the zebo when i click on LNAV i have tested with and without these sounds

Charlie Baker

Zibo gets more confusing , it has +5 Parameters for the Minimum warning only , which one is working ? 🙄 .... not sure !! 🙃 >> Try this configuration below , if it works then the "Plus100" warning will be added later

K AKAIO

There is really no "approaching minimums / plus hundred" and "minimums" callouts. I tried set minimum with baro and radio - no differences. In Tablet everything seems to be fully working, but it doesn't.

Lev Game's Channel

👌

K AKAIO

- 🤨 you said the last time that the door sound are working for you ? - Minimum and approaching-Minimum are fixed and configured correctly ( like the Default AXP ) - Noise outside : it may be the Hydraulics Pump ?

K AKAIO

- no door - no "approaching minimum" - no "minimum" - noise sound outside when turn off the aircraft

Nick Buick

Nice update! Big improvement from the last version. Thanks for your work. Is it possible to try to recreate the roar/air rush noise from the CFMs when thrust is applied? It's hard to explain but here's an example at 5:01. https://youtu.be/FZF1-yOcKHk?t=303 Sounds like thrust is applied and a low roar/air noise combined with a gradual spool up sound through 5:10, then at 5:11 the low roar/air noise goes away and spool down noise as the throttles are presumably closed. 14:18 is another example. Anytime I fly on the 737s that noise sticks out to me so that would be great to hear! Thank you!

Zach

is it Installed Correctly ? ( follow "Zibo PA install.jpg" ) #To Re-Enable the Default Zibo PA : - Open "Default Zibo" then move the "fmod" folder inside the B737 Aircraft Directory - Rename the Default "Master Bank.bank" file to "Master.bank" - Move "Master.bank" , "AW_1.bank" , "G_1.bank" & " V_1.bank" inside the new "fmod" folder

K AKAIO

im having ... couldnt load the sound bank! AW_1.bank warning, i renamed default fmod to fmod.1 then dropped in the 3 folders but having this issue, using zibo 3.49.17beta4

Nick Buick

(👀) , Al the TCAS Parameters are set correctly ! but not fully tested 😓

K AKAIO

Just installed new version 1.74 and still no TCAS sounds during test and no click sound on VNAV button

Richard Pfeiffer

New version is almost ready : - Fixed Warning sounds : GPWS , TCAS , Autopilot , other Alerts - Changed Engine start sounds + other tweaks ( still in Progress ) - Fixed Missing Cockpit Control sounds and Trim Wheel - ...... PS !! The doors sound are tested and they are working fine Will also check the GPU , and for the PAX chatter You need to Enable "Default ZIBO" PA

K AKAIO

Zibo sounds are good, still no AP discon, baro scroll has no sounds, pax chatter not working , can u make fuel pumps louder , repeating GPU start sounds after disconnect

Nick Buick

Please use the "v1.78 (Z+)" version

K AKAIO

Seem to be struggling with this one, tried to install both versions into the -700U and get 'Missing or Unsupported files' with no sounds at all :(

Nick Langley

Currently Fixing all remaining warnings GPWS , Alerts & TCAS , ( sorry ) The doors of Zibo never open for me 😓

K AKAIO

- No door closing sounds - AP disconnect missing - No callouts, approaching mins, and minimum

Nick Buick

It will be fully fixed soon , for now you can fully disable this warning

K AKAIO

Great soundpack as always! However I seem to get warning with "Airspeed low" when it's not low at all. Thanks in advance.

Jakob Ek Jensen

All Noted 👌 , Thanks for the feedback Hint : The buzz-Saw volume is carefully designed this way so it will not be very loud and annoying

K AKAIO

This is nit picking, just an early warning but I have noticed 2 things I have. The first is the interior engine buzzaw in front of the fan blades, so sitting in first class, is was too quiet. On real 737 during takeoff, the whine goes away when spooling up to takeoff thrust. It's only the buzzaw sound you hear and it's loud. Not even the Zibo gets it right so kudos for getting the sound right it's just quiet and too whiny. https://youtu.be/qhHNDR4_aT0 The second thing is the exterior sounds, it's a similar thing. The whine is too loud. And also, the N1 at 102% is the same pitch as N1 94%. They are different pitches. The reason I point this out is because that's what gives a sound pack character and this just is lacking in that department. It's is a great sound pack though!

Hurricane Jahya

👍

K AKAIO

Me too. And there are many silent ones ， I hope they can improve

zhangyichuan

HI, I found new problems (SYS TEST)No sound ， Corrected sea pressureThe knob is silent，Please fix these problems as soon as possible

zhangyichuan

also anyone else having random AirSpeed low call outs ??

Nick Buick

1/ First Officer Calls & pax chatting Use the configuration inside "Enable PA\Default Zibo\" 2/ Door , A/P disconnect will be checked & fixed 3/ chime can be louder when the cockpit door is open 4/ flap/parking brake levers ; the used sound samples are newly recorded from a B737 aircraft

K AKAIO

Since i've installed the soundpack i get "airspeed low" callout also

Giordano Corradini

- No A/P disconnect sounds - No First Officer Calls - No Door Sound - Too low chime sounds - No pax chatting - Improvement needed on flap lever and parking brake sounds

Nick Buick

Hello and thanks for the update. Some notes: -Flaps are right on now, much better. -Engine start sound sequence still is off, at least from cabin. When selecting engine start, you just here a soft rumble, and then when fuel is introduced, it sounds like another slightly louder rumble. There's no "build up" or slight whine. Here's a reference vid: https://www.youtube.com/watch?v=CLuJHiX76Mg -Engine sounds during spool up and down still seem off. https://youtu.be/s9vRku_hjvI For reference. It's hard to put my finger on it, they just kind of seem flat. Maybe the hydraulic sounds in real life sound a little different or a more noticeable during taxi? -I'm getting an "airspeed low" call out right after departure, but this could definitely be because of user error with how I'm flying the Zibo and not the sound pack. Just wanted to see if anyone else had this issue. I'm probably messing something up, I've not flowing the mod in a while... Overall they keep getting better, thank you!

Zach

Noted 👍 , will make new improvements after getting better sound samples

K AKAIO

1/ Engines start : will be checked and fixed 2/ A/C : Check the Volumes on the "PAD" , then use the temperature knobs to "C" Position ( mentioned on the "B737_Sp.pdf" file ) 3/ Flaps : No good samples recorded yet 4/ Spool : it is helpful if you can provide a demo video to exactly know what you mean

K AKAIO

Previous version is re-Posted > Did Zibo also remove the Protection on their Ultimate version like the 737-800 ? or it still not updated ?

K AKAIO

Thank you for putting the time in to update this sound pack, but I do have to say, the sounds just aren't there. Doesn't have those 737 sounds. Packs, engine startup, and 0-40% N1 spool up sounds, batter, and GPU on sounds, generator bus transfer sounds, etc are too quiet and incorrect. No fuel pump sounds. Flaps don't sound like a 737. Just not there mate.

TheGreatestMatt #1

I would agree that engine start sounds are not really heard—it just kind of “turns on” and everything sounds rather quiet after the fact. Air conditioning noise is pretty quiet from the cabin as well, it’s hard to tell that packs are actually on. Flap motor sounds don’t quite sound right either. Also the 737-700 and 800 have a rather distinctive spool up and down noise that I don’t hear as power is adjusted—on taxi, for example. Thanks for your work and excited for future updates.

Zach

I get a error with 737-700U missing guid muffler something. previous version worked.

Harbor Brass

Did you check the volumes ? ( see the "B737_Sp.pdf" )

K AKAIO

Yes I just tried this mod for the 5th time and I just don't understand the hype, not to be offensive. Just seems everything is quiet. Didn't really hear any engines start. the best of this mod was the apu start up. I followed the instructions to the T. Do you have a sample video that's using this mod with the updated zibo?

Ayo Kiff

The PA that found inside "New PA" folder ?

K AKAIO

hi, new PA sounds dont seem to be working

Nick Buick

Planning to add 2 configurations to enable the Default PA and cockpit sounds on the next version if it dose work on the latest Zibo Mod

K AKAIO

Can you show me how to edit your sound packs? I would love to use some sounds of the default 737, as I find them better than any soundpack out there and especially better than the AudioBird sounds. Your soundpack is already better, but some switches and e.g. the trim wheel could be better, but that's just my opinion. Is there any way to mix your pack and the default one? I already extracted the master_bank from the default one.

Ventor

Yes , that's because Zibo aircraft uses a Protection against editing it's files 😕... therefore we can't enable both the new and the Default sounds together or add any additional effect . I didn't try the v3.49 yet ! , but i think now that modification can be made 👍 assuming the "CRC" Protection is removed on this version ( as mentioned by "Asher Pramono" )

K AKAIO

Loving the mod, though was curious. Is there a way to have both your soundpack and keep the default zibo cabin sounds? Unless I'm doing something wrong your mod seems to remove them

Nesserris

well Alright 😀 , good news

K AKAIO

Hey, just wanting to let you know that Zibo recently lifted the CRC restrictions on the files. You might wanna test it out and make a more fitting soundpack for it in the future!

Asher Pramono

check the x-plane and the Zibo "PAD" volumes ( see "B737CFM_Sp.pdf" )

K AKAIO

When i used it i had no APU sound as well as the fuel pump sounds and elec sounds

Will Moody

Hi , The install is simple : just drag and drop the "fmod" inside the B737main folder and overwrite the original files !! Do not delete anyfiles just replace only Snd files ? : - The 2 ".snd" files ( "b738.snd" , "b738_4k.snd" ) are added from the "B737-800X" v3.47 to avoid "CTD"

K AKAIO

Hello, how are you? Nice to meet you, I can ask you a question, look I had problems with the installation in the 737-700, since I followed the steps, but the tablet told me missing files, I did exactly the instructions, but it does not work, I did not delete anything Just renown, the question would be, what would the default SND file be?

tomas basilotta

Mute it using the volume controls on the Zibo Pad

K AKAIO

wonder if you could disable the analog gyro sound, since the Zibo doesn't have them with its usage of the ISFD

Asher Pramono

737Ultimate ? what sound option ?

K AKAIO

Does not work on the 737-700 for me, have tried both Zibo sound options and still nothing

Grug Gaming

did not test it yet but the sounds will always work because it's using the Default Zibo files

K AKAIO

is this confirmed over 3.48.6 version? thank you :)

TTT TK

i can't make those changes on the newest Zibo Mod because thier configuration files are Protected against editing (as mentioned above) , >> If i try to add my configuration file ( which have those effect you requested ) the Airplane will not work Properly , so i can make/add new effect only on the older Zibo version (v3.32) or the Walter-White 737 Max

K AKAIO

Did not update it because no one is using it ! but will Re-upload it soon - For Now there is 2 version available : Complete : it include all sound effects Works only with the older Zibo Mod v3.32 ( i Prefer this zibo version more because it loads faster than the new ones ) , In-Complete : for New Zibo version ( 3.45 and + )

K AKAIO

Hello, the link to the default laminar research 737 soundpack is not available anymore. Thank you

HUMEAU Gauthier

Just some friendly requests/observations for this pack, these notes are mainly from the cabin: *Hydraulic sounds from cabin. The 737 has a distinct hydraulic noise from cabin--right now it just kind of feels like a permanent bass/rumble. *Engine start up: again, at least from cabin, it just kind of sounds like a very low rumble. *Flap motor sound: not very audible from cabin and doesn't quite sound like a 737. Is it possible to have that window-vibration effect that you have, I think, in the 767? That's a nice touch. Finally, a little drag noise when deploying speedbrakes in air would be nice. With that being said I really enjoy your sounds and know that you're limited with the Zibo. Thank you!

Zach

i can not enable many thing on the "Zibo+" version , but will re-check and edit the engine in cruise sounds and will re-add the older P-Brake & Flaps Lever sounds

K AKAIO

after take-off the sound of the engines suddenly drops, if I open the hatches, the sounds of the APU, hydraulic system, etc. are not heard. Sound of the flap lever and parking brakes worsened compared to previous versions. no GPU sound is heard from inside the cockpit.

Nick Buick

thank you :)) have a good day

TTT TK

👌

K AKAIO

hi. please test on 3.47 new version. thanks in advance

TTT TK

couldn't find a link for the 737-900 , only updates are available

K AKAIO

I can only use on the 737-700U and 737-800X. The 737-900 gives a CTD saying "cannot find left\dynamic_start in any GUID"

Donovan Patrick

🤨 , will check it also

K AKAIO

APU sound does not work on mine

Will Moody

noted !

K AKAIO

Am also having issues with flap sound playing nonstop. Not getting roll sounds during taxi with roll sounds on "10." This is on Zibo v. 3.46

Zach

check the Volumes on the "PAD"

K AKAIO

I`ve experienced no sounds like roll or touchdown sounds.

MC Crew Fish

use " For Zibo Mod(v3.46)" but first you need to restore the Default fmod folder

K AKAIO

Is the soundmod compatible with the 737-900U from Ultimate Team? I tried to install version V1.7, but ended up with the aircraft completely buggy.

Eduardo Holanda

This is on the "For Zibo Mod(v3.46)" set ?

K AKAIO

I've noticed the flap sound might be glitching and the motor sound does not stop after moving flaps the first time. Not sure if that is a glitch on my side or not. And if I may suggest the flap motor sound is too high pitch. I'm also unable to hear hydraulics / fuel pumps inside the cabin. All is set to your recommended values.

Josh Grebeta

not compatible yet with v3.46 (will be ready soon ) Temporary Fix ; 1/- install the fmod folder of the v3.45 inside the v3.46 2/- install the S-Pack

K AKAIO

i can't use this due to error. it said "couldn't fine guid". why this happen to me?

Lee Seunghyun

i'm try to download it still no luck ( cant make a copy to my G-Drive )

K AKAIO

Hi! When will there be support with version 3.46?

Elmem

you can adjust warning sounds volume using the Audio Configuration on the PAD : "GPWS TCAS VOLUME" (more info on the .pdf file )

K AKAIO

Is there are any way to make radio callouts louder during landing, or it's normal?

Вадим Вейн

It was mentioned above ; >> " To Avoid Getting a "CTD" Do not ! overwrite the "fmod" folder when Applying a new Zibo update" To Fix it : a) Re-install the fmod folder found in the Zibo v3.45 Full b) Reinstall the sound Pack

K AKAIO

Hello, I was wondering if there was a fix to get this working with the latest versions of Zibo. When I install the soundpack I get the following error when launching the aircraft (followed by an X-Plane crash) Couldn't find a GUID for this event name! event:/retract_sb

Chris Hargreaves

tested & working fine on the 3.45 , check the volumes on the Tablet

K AKAIO

tested & working fine on the 3.45

K AKAIO

Same, no engine sounds in zibo 3.44.34

Вадим Вейн

I get no engine sounds on version 3.44.34

Odd Håve

Speed brake sound is come out the first landing. but next time sound doesn't working. I've tried reinstalling and changing the zibo version but 3.44,3.45 two version problem is same. But in 3.43, there's no problem with the speed brake sound every time. Can you tell me why? (It was tested with 3.44.24 and 3.45.5)

B L

you mean 3.45 ? or 3.35 ? , 1. Not Tested yet with v3.45 2. it works with v3.44 and all previous versions , so it will work fine with 3.35

K AKAIO

will this work for Zibo 3.35 full, yea doesnt work engines wont start

Nick Buick

Sounds are Updated for Zibo v3.44.28

K AKAIO

yes !

K AKAIO

L-Gear Door sound ? , just Fixed in "fmod studio" . but still not sure if they are the correct Sounds Parameters for L-Gear Doors . uploading soon...

K AKAIO

cain i use this pack for 737-900 Ulitmate mod ?

Graviplash

Can you add wheel well sound about 5 second after gear up?

JK

Today is v3.44.26 ! , Oh Man 😵😆 .

K AKAIO

I am getting an error during the load of Zibo version 3.44.25. It mentions as follows: Couldn't find a GUID for this event name! evemt:/mask_breath (soun_fmod_container.cpp:61)

Jakob Ek Jensen

will download this version and then check it out , - but first make sure you installed the sounds correctly , > Do not Remove the Default fmod folder !! , just extract and replace the files

K AKAIO

Getting errors on Zibo: 3.44.24

Dekel Amrani

yes it works , just Extract & overwrite , do not delete the original fmod folder

K AKAIO

Zibo 3.37.18 can't work? I want to play Zibo Ultimate 737-700 and 900

SMILE CANDY

More Distance will be added , and i'll try to match it with the Demo Videos

K AKAIO

Thank you for the really good sounds but flaps sound is quiet and would it be possible to get external engine sounds more distance. Something that can be improved is cfm 56-7 engines typical "spool up 40% (N1)" sound. Below two examples. I use zibo 3.43. :https://www.youtube.com/watch?v=sDNgoTMiXaw&t=177s :https://www.youtube.com/watch?v=t-5_RZ9vVz4&t=96s

JK

not so sure , All "V1" sound events are added correctly , maybe it was caused by something on the Zibo logic systems

K AKAIO

I'm using the sound pack well:D When I first installed, I heard v1 call out, but I haven't heard v1 call out recently. Other parts like GPWS sound good without any problems, do you know how to solve this? I'm using Zibo version 3.43 Thank you for making the sound pack.

B L

after a gathering more suggestions or Requests to be made on the next update , so what you prefer to be made ?

K AKAIO

When will you release 1.7?

Doozy

no , it's not Possible , sorry

K AKAIO

like even the engine sounds i love. like is there anyway to get just default fmod with engine sounds or get you fmod to work with the 3.42 zibo?

owen james

in the new Zibo ? or the older one v3.32

K AKAIO

all good but how can we keep the PA

owen james

Thank you! I'm not really hearing engine start sequence sounds...in the cabin or outside. Is this something that can be improved? Also, flap sounds https://youtu.be/MkovMr9Eet0?t=212 And the characteristic roar of the engine spooling up and then the "spool down sound" https://youtu.be/MkovMr9Eet0?t=305 Also a little more rumble / roar down when accelerating down the runway/high thrust. Thank you for your efforts on this one!

Zach

Just want to give you a heads up...the Air Conditioning, landing gear and flap sounds dont play during the replay mode.

Charles Jennings

Use the Tablet Volumes > "ENGINE VOLUME" = 10

K AKAIO

engine sound really small in cockpit. is this normal?

TTT TK

Yes. And engine star switchs in overhead

Ignacio Andres Rizzo

The fuel Cut off levers ? found below the throttle lever ?

K AKAIO

Start valves?

Ignacio Andres Rizzo

fixed

K AKAIO

for every Zibo package that use the "1904REV1" version of AXP sound set

K AKAIO

for now it works only with the 1904REV1 version of the fmod sounds it came with last Zibo v3.42 & Ultimate v3.37 - if the zibo version is correct and still have problems try to re-install the Default fmod , then re-install this new set >> do not delete or rename anything , just extract and overwrite the files

K AKAIO

the app callouts?? 2500 , 1000 ? good job

Ignacio Andres Rizzo

for tboth the 700 and 800

Charles Jennings

I followed the installation steps but when i spawn into the aircraft I get a missing files error on the efb and the plane becomes unusable

Charles Jennings

Sounds no longer available to download??

Nick Buick

Will fix it , you can mute the Trim sounds using the tablet volumes

K AKAIO

For me as soon as you use trim the trim sound plays constantly, had to uninstall.

Kieran Harvey

Does it works with the 737-700ultimate (also uses audiobird fmod)

Miguel Oliveira

Whoops! Found that there was a separate package for IXEG already released. Disregard everything except my comments and gratitude on your outstanding contributions ;)

Torbjørn

Hi FTSim+! First, awesome job on so many variants, and this preview looks amazing. Really excited and looking forward to hearing more about the IXEG-integration! Sounds are super-important, and I feel that each new sound-set you create makes each plane brand new, so thank you :o)

Torbjørn

No Fmod will work with ZIBO mod 3.4+ only if he remove the protection on the B737 .

K AKAIO

Hey matey - any update whether this works on 3.4+ ZIBO?

Praanot Kokkate

Not yet ... but i'll try

K AKAIO

Have you reached out to Zibo? AudiobirdXP is no longer with the project, he may want to have someone's help for sound updates. Since Zibo is free, though, this sound pack would have to be free. But it could be worth a try if you're interested and willing.

Zach

Neoow (-_-) , No... it's not compatible for now

K AKAIO

Is this compatible with the 737-700u? I think it uses Zibo's 3.37 version?

Youngy

Startup had a very low volume ? or you mean the Fuel burning (combustion)

K AKAIO

No engine startup sounds till n2 25%...is it normal?

Miguel Oliveira

Final touches ...

K AKAIO

Any updates on the IXEG sounds?

Jonathan P

I like the sounds! It's just weird that we can't use it in the latest versions :<

Hikari-Akito

oOh Wee ... That's a challenging nightmare how did not started yet !! , i wish zibo team remove this Protection of "Feature" before it begin

K AKAIO

Any update on the progress of making this "Zibo compatible"? - Thanks :)

Youngy

Maybe you have Deleted/Moved some of the aircraft folders other than "fmod" & "sounds" , Try again in a new "fresh" copy of the aircraft .

K AKAIO

I got the zibo mod for it but I keep on getting missing files and an unsupported files error after adding these in

Jonathan P