A400/C-130_Sp (X-Plane)
Added 2021-01-13 05:16:24 +0000 UTCA400/C130 sound Pack for x-Plane11 Compatible with A400 JPB and x-Hangar C-130/L100 Packages
What's inside :
- A400/C130 Turbo Prop Engine sounds
- Cockpit sounds : Avionics , Controls , Gpws
- Weather sounds
- Exterior sounds ; APU , Gears
What's New :
v1.02
- Added Configuration for Laminar C-130
- Configuration "Alt-Eng" for x-Hanger C-130 v2 ( not tested )
v1.01
- Added Configuration for x-Hanger C-130/L100
- Other Minor fixes
Available Links :
v1.02
- TMHF_Sp : Download Link
v1.01
- TMHF_Sp : Download Link ( Password = ftsim+sounds )
Comments
@MC Crew Fish . Thanks for the link to the A400M
Michael Ward
2022-04-09 13:08:01 +0000 UTCWorks fine for XH C-130. Thank you!
jcycmj
2021-10-28 07:15:08 +0000 UTCThanks for the updated v2 sounds for the X-hangar v21 Will test and comment.
Claude Manigat
2021-04-13 23:29:19 +0000 UTCI'm having a similar issue as well, is there a way to get the A400M?
Pict
2021-04-11 21:01:06 +0000 UTCThank you. I will test the sounds =)
MC Crew Fish
2021-04-08 12:18:47 +0000 UTCHey guys I am unable to read the french site. How can I download the mentioned A400M?
MC Crew Fish
2021-04-05 22:28:01 +0000 UTCOk back with testing results. No change in the issue unfortunately when I used the new package. Just to be clear, this is on the version 2 (just recently released) of the x-hangar C-130. The sounds when used for the original version 1 are working fine. I apologize for any confusion. when I install the sounds in the version 2, it works fine except many of the cockpit switches have no sound. Perhaps the developer changed some data refs between versions. I can make a list of the non working switches or report data refs if that is helpful. I saw in a post you replied to that you mentioned changing the A400.snd to C-130.snd to work with the version 2. I tried that, and while all the switches work, the engine sound does not change with throttle and is too loud inside and too quiet outside (almost like they are reversed). It seems that the version 2 of this plane needs its own sound pack because it has apparently has some refs that are different than the version 1. I am not sure which is easier to fix, the missing switch sounds in the version 1 sound pack so it can be used with the version 2, or redoing the engine sounds in the A400 pack so it can be used with version 2. I am not knowledgable about sound engineering, but am happy to help with whatever testing or logging data refs are needed to fix. I appreciate your patience with this.
Claude Manigat
2021-03-15 15:57:48 +0000 UTCWill do, thanks.
Claude Manigat
2021-03-15 11:15:11 +0000 UTCThanks , But Those values looks very high compared to v1 🤔 v1 Values : - Idle 670 rpm - Full Thrust 1100 rpm > i made a quick change ( link below ) , if it still not accurate please check the values again because maybe a Period (.) is missing Exp : 7629 rpm maybe it is 762.9 rpm New Link : https://mega.nz/file/LsQk1Dpb#wlSHYd_p7UXaW0eeYOdxxzH8GIxWVjHu2n8Tv_EmZkw
K AKAIO
2021-03-14 23:07:28 +0000 UTCOk that was not too hard. Here are the values: Idle= 7629 rpm. Full throttle seemed to vary with a low of 13770 and high of 13831rpm on the ground, in the air it seemed to stay around 13793-13806 rpm. I hope this is helpful. For what it's worth, the technical documents I have show a maximum rpm of 13820. Thank you for working on this!
Claude Manigat
2021-03-14 00:50:43 +0000 UTCI Think I still have DRT from another project, I will report back with those values.
Claude Manigat
2021-03-14 00:32:43 +0000 UTCThis will take sometime but if you know how to use "DataRefTool" then you can help me fix the issue quikly , 1/ - Just Paste this DataRef below in the "DataRefTool" search bar ; sim/cockpit2/engine/indicators/engine_speed_rpm 2/ - Read the Value when the engines on "idle" and the value at "Full Thrust"
K AKAIO
2021-03-13 20:08:42 +0000 UTCTested out the sounds on both versions of the x-Hangar C130. The sounds work perfectly on the v1. On the v2, using the "C130.snd" gives some missing sounds and a steady engine volume no matter what the throttle, inside and outside. Using the A400M.snd renamed to "C130.snd" (same as the .acf) gives the same. Renaming it to "C-130.snd" gets the rest of the sounds back, but the inside sound is a bit too loud while the exterior sound is way too low . Please advise if this is some kind of error on my part or an update for the v2 version of the C130 is needed. Thanks for the great work, it's breathing some new life into these planes.
Claude Manigat
2021-03-11 21:06:02 +0000 UTCAwesome, thank you for the C130 info/update!
Claude Manigat
2021-03-03 20:05:03 +0000 UTCjust rename the "A400M.snd" with the same name as the Aircraft ".acf" file Exp : Aircraft ".acf" = C130.acf > Rename the fmod's "A400M.snd" to "C-130.snd"
K AKAIO
2021-02-26 08:11:32 +0000 UTCXhanger just got a update. can we get the sounds too?
Harbor Brass
2021-02-25 20:12:23 +0000 UTCAn adaptation for the x-hangars C-130 would be fantastic as well, if possible. Thank you!
Claude Manigat
2021-02-01 15:39:53 +0000 UTCwill do
K AKAIO
2021-01-19 04:01:37 +0000 UTCCan you adapt this for the default C-130 ? There is also a 3D cockpit for it on the .org
Heliplane380
2021-01-18 23:00:25 +0000 UTC
