NokiMo
FTSIM
FTSIM

patreon


A320Neo_Sp (MSFS)

# INFO :


# What's inside :


# New changes :

(24/Nov/2023)

v 1.86 (23/Nov/2023)

v1.85 (24/Jul/2023)

....


# Available Links :

v1.86


Older Releases

v1.85

v1.84


# Notes :


A320Neo_Sp (MSFS)

Comments

Nice! Please update for Horizon mod A321!

Dustin Scott

Can we get an update for this with the more modern install method?

Blook

will there be an update or fix to the horizon mod? its is not working

Eli

Hey, your Mod for the Horizon LVFR isnt working anymore. Do you plan an Update?

Frankstar

when I move the sound folder "Enable Cockpit Sound" to the FBW, the cockpit sounds are missing. Where should the folder go? Nothing found in the instructions:(

EDDF_Chris1

how come the volume is low?

No Rulz

Inibuilds A320neo please

Ash Rushil

Any update planned for this? Would be ideal for the Horizon LVFR NEO...

Youngy

The PW whale sounds while increasing thrust is still underwhelming. Can you make it similar to the KOSP sound pack seen here for Toliss? https://www.youtube.com/watch?v=DHrcCVSiop8 See 37:10. Thanks so much for your work! :-)

Rahul Kumar

Do you think you can make compatible with the default LVFR A321neo?

ADP9295

does this work with the inibuilds a320

jamesy1324 .

Please update ProSim sound!

Christian Behne

Could you please update Prosim sound too?

HenryM

Same here. I only hear the default sounds. Can you please update it?

Christian Behne

Any chance to get this sound from the PW? https://youtu.be/pmSMqy8HRDA?si=_U-Qw0VXe_HtjmFg&t=177

JJ Stevens

New Prosim flight model broke this add-on! Even if I follow to the letter your instructions I am unable to get your A320 Neo sound to work. Instead since the latest Prosim Neo v1.01 came out I am only hearing Prosim défaut sounds

HenryM

Bump.. Need this

Zavier Cordova

Hi! Love the sounds! Can you update for the Horizon simulation lvfr a321neo mod and all the other Horizon sim airbuses please? Not getting gpws callouts. Love to make a video of this

Majortom

Also I would like to add that I love your PW sounds for the ff320 so if you can make them as close as possible to that then it'd be much appreciated :)

Mariano Flores

A little request but can you make the "whale" sound a little bit louder on the lvfr SP? :D

Mariano Flores

How do I install this with the LVFR A321NEO V2.03? There are two different sound .PC.PCK files now

Ethan Pothering

Any chance of updating this for the latest LVFR mod? I noticed there are now 4 files. FBW_A320_NEO_1.PC.PCK FBW_A320_NEO_2.PC.PCK module.json sound.xml

Brad

Could you upload a updated version for FBW v0.10.0? Thank you very much!

Flyingforlife

Hey dude! It looks like the mod ends up working on the LEAP engine and not the PW engine for the z_LVFR mod. Are the paths for the SimObjects correct?

Rahul Kumar

fixed

K AKAIO

RA callout is missing (zLVFR MOD)

yongeee_

Great Work

Mario Lopez

Yes and actually quieter than the CFM

HenryM

FBW ?

K AKAIO

yeah , there is a mistake

K AKAIO

Instructions delivered with Prosim are for the 737. Not clear what to do.

HenryM

Would it be possible to add GPWS and altitude call-outs? I've noticed that these sounds are missing after installing the sound pack. The "50,40,30,20, retard" callouts will sure bring more realism and immersion. Hope you could look into this, thank you!

Jam Anchores

configuration for zLVFR is added

K AKAIO

Has anyone managed to get this working with the LatinVFR A321 PW with the FBW integration?

Brad

Hello! Is it possible to have an updated cfg file for the latest FBW stable release (0.9.1)? Thanks so much!

Chris Kabigting

Would love to have that so much for the A321 Neo!!

Ertugrul Altun

Request added , soon will be ready if possible

K AKAIO

Any chance to get the soundpack for this mod? https://flightsim.to/file/36395/lvfr-a321neo-fbw-compatibility-mod

SockelMania

not working...

BurakETC

"stable" is V 0.8.2 as of today June 30, 2022 and the SP doesn't work. It screws up the aircraft operation.

Porcelain Kilt

On The A320NX v0.7.4 ? , Break How ? 1/ Try to Re-update the "Layout.json" file using the "build.py" script ( Noted on the "INFO.pdf" ) 2/ Manually Editing the "Layout.json" a) Restore the Default FBW "Layout.json" file from your backup b) Open the "Layout.json" file with NotePad c) Paste this Parameter (shown below) after any " }, " { "path": "SimObjects/AirPlanes/FlyByWire_A320_NEO/sound/A320_NEO_Sp.PC.pck", "size": 72758542, "date": 132843220719923537 }, like this : { "path": "SimObjects/AirPlanes/FlyByWire_A320_NEO/runway.FLT", "size": 8397, "date": 132860780620707800 }, { "path": "SimObjects/AirPlanes/FlyByWire_A320_NEO/sound/A320_NEO_Sp.PC.pck", "size": 72758542, "date": 132843220719923537 },

K AKAIO

I am currently using the stable version fbw and it seems to break the aircraft for me :-(.

Ellery Queen

uploading the A32NX updated version soon

K AKAIO

Hi and wish all the best for 2022. Is latest update v1.82 (18/Dec/2021) for A3NX also ? or is just for default Asobo edition. thanks

Seth

Noted 👍

K AKAIO

How can I do interior engine sounds louder? It's too quiet in the cockpit in comparison with standard FBW engine sounds.

Lev Game's Channel

hi as for the leap version the same thing for this one. The stable and develop versions only have to pck files and they are different to the ones on the video and on the info.text. can you update instructions for this thank you in advance.

Wally Medrano

The Problem is on the A32NX (Developper/experimental) >> it will crash or become "buggy" when you update the "layout.json" file to enable the new sounds

K AKAIO

Is it possiblem to make it for A32NX experimental?

Mariusz Kalinowski

The developer write in the description what it works only on the Stable version!

Максим

Stable release ? , Please do not use the Dev Versions

K AKAIO

As soon as I have installed this mod my sim does not show up the fbw A320 anymore. It is causes by this generator changing the file... I have followed every step in the video. Now I can't load the FBW A320 anymore

Alex1985

Yes, new dev version

Mariusz Kalinowski

And I don't have ATC sound right now :D

Mariusz Kalinowski

I used it in A32nx dev version, but there are some bugs. No AP disangage sound, no flaps lever changing sound (interior), no airbrake lever sound. I tried to change it myself in config file, but it doesn't work right now. Earlier was working good.

Mariusz Kalinowski

will Re-upload it in a simpler install format for the Default A320 , for now restore the default "sound.xml"

K AKAIO

Hi there! I have followed the install instruction thoroughly to set the sound up on the Default A320 - No luck there's no sound... Made sure to read the thread and tried your troubleshoot several times any idea what could be wrong?

Jordan Ruiz

v1.78 is just the new configuration added for v0.51

K AKAIO

Hi, where can I download v1.78? All I see is 1.77? Thanks a lot! Best regards!

Christopher Grof

The Files are renamed randomly when extracted so the numbers will not match the original file name , but and i know what sound you referring to , > what do you need exactly ? 1/ the Avionics sound file (.wav) ? or 2/ disable that sound

K AKAIO

Hi there - thanks for the sound pack; I am trying to incorporate it into my flightdeck setup - when external power or APU is applied there are several sounds that are played - I am unable to find the sound which is triggered prior to the airconditioning, it sounds like a swirl and is played at 31 seconds in your video - https://youtu.be/qwyywlFh7Io?t=31 ; I have extracted the sound files and the files associated with this startup is 16, 57, 58, and 72 ; do you know which sound number is played prior to the airconditioning (no 72)? Thank you

Ben Lim

Great , i'm making a few fixes soon anyway

K AKAIO

1.73 works great with latest MFS update

Seth

the Problem is the "build.py" file , you did not "Run" it or is placed into the wrong directory

K AKAIO

HI, your A32NX v1.83 with Pre-installed Doesnt WORK with the LAST UDAPTE MSFS 2020 29/09/2020

CH

FTSIM , Hello, the A32NX PRE-INSTALLED WORKS 100% , but i had the last A32NX this version is the last and the cockipt have other LIGHTS , this A32NX when i change sound the A320NX APPEARS DARKS SCREENS, I give u my LAST A32NX and u TRY put the Sound pack and send me again works , please. Thanks good job. https://mega.nz/file/gA0zmajA#tl31clHtclzfU1DEL1EuE7y0S6OklSpU27wa3cemsW8

CH

did you run the "build.py" , usually it's the main issue

K AKAIO

link to my image , MY A32NX last version, with ur SOUND pack https://i.ibb.co/QMKf7b1/cold.jpg

CH

It's impossible, I can't install this, I've tried everything. With my last version A320NX the sound works,! but the buttons do not work and the screens are black. I have tried everything. I have done everything correctly. If you have a working A320NX, send me the link With the default A320, copying the sound makes the plane disappear from the game menu

CH

I have this, but all sounds works perfect...i have NX mod and did what it says in the notes how to install....simple, just backup the sound.xml or rename, and the copy the *.pck file from S-pack folder to A320NX/sound folder. And then move or copy the "build.py" to the root of the A320 directory (not sounds) and then run it to update the "layout.json" file.

Fredo Gaming

use the "New Configuration for A32NX" added above

K AKAIO

installing on the Original A320 ? - Did you run the "build.py" after installing the sounds ? >> The build.py file must be placed inside "asobo-aircraft-a320-neo" folder that contains the files "de-DE.locPak" , "en-US.locPak" ...

K AKAIO

soon will be made as the IAE & CFM

K AKAIO

seatbelts announcement sound is broken i think

CholoSimeone

It is impossible for me to install this sound, I have the A320 by default, I am doing everything in the video, I have also installed the phyton program, and when I open the MSFS2020 the sound does not work

CH

Any chance in having the LEAP-1A sound converted for use with FS2020 since the A320neo in the sim actually uses the CFM LEAP engines?

Asher Pramono

Use this : https://www.patreon.com/file?h=41498987&i=6396691

K AKAIO

OK great, but same with fire alert sounds. APU and engine fire test. They have implemented it :)

Pa Bas

already done that from the v1.71 and the belt sounds are working fine

K AKAIO

The A32NX has seatbells chimes implemented. If you dont add these kind of sounds by yourself, you could edit the sound.xml that the chime sounds from A32NX can stay

Pa Bas

Belt sounds ? Sure but PA and other effects !! i have to gather more data first to know if possible .

K AKAIO

Hello! Loving the sounds, any plans to add seatbelt chimes, maybe some passenger annoucements etc?

David Norfolk

How to install : https://youtu.be/ioZiXraqji0

K AKAIO

Also i Noticed that the sound "Fade-out" on the interior view is not working ,

K AKAIO

install tutorial is added here ; https://mfsim-sounds.blogspot.com/2020/09/a320neosp-fs2020.html

K AKAIO

Hey. I've done all steps including running buildpy. I have 3 soundpacks and it still doesn't work. I appreciate if you help me thanks

Kevin

same

Praanot Kokkate

Correct ! you must get 3 .pck files then copy the "sound.xml" from ..\\S-Pack\A32NX Mod\

K AKAIO

Sure , More sound effects will be added soon

K AKAIO

In my situation everything is working except the engine sounds. How many soundpack should be inside A32NX /sound folder ? i have the default Asobo_A320_NEO.PC.PCK , Asobo_A320_NEO_Improved.PC.PCK, and Asobo_A320_NEO_Sp.PC.pck ( FTSim) with sound.xml ( FTSim) , is that correct? I also executed build etc

Seth

i'll reduce the Engines noise Fading "on Cruise" , also i think the next best solution to control the wind sounds is to set it on the "User Interface" slider (Who Controls the FS Menu sound)

K AKAIO

more ground sounds and louder. the rest are amazing good work!

Copy Santex

Got it working! Thanks! It would be amazing if we could have some rolling, gear sounds, etc

CholoSimeone

Making a route now with 1.71. On cruise mode engine sounds are almost silent, there is only a wind sound interiror/exterior. Is this normal ? Also when ATC is speaking has a conflict with wind ( which are on the same volume/level)

Seth

1/ For the A32NX use the Available "build.py" file . 2/ If you installed before the new sounds on the Default A320 "asobo-aircraft-a320-neo" : a) - delete any new file added b) - restore the default sounds ( if you don't have a backup you can leave the "sound" folder empty , the originals are already inside A32NX ) c) - Run "build.py" file found inside "asobo-aircraft-a320-neo" ( you can copy & use the file from the S-Pack if you dont have one )

K AKAIO

I think build.py aint executing properly

CholoSimeone

Not working for me. Already followed instructions

CholoSimeone

Hello. I have an issue. Since the first version build.py never updates my layout.json and I end up with no engine sounds. I have repeated multiple times following the instructions very carefully but it never works. I have tried both with the A32NX and without it. Neither of them work. Could you know why my layout.json doesn't get updated by build.py?

bravo77whiskey

will reduce it or assign it to another volume slider ( "Other Aircraft" or "User Interface" )

K AKAIO

The A32NX one, check the readme in the zip file.

Chris Nix

I use the headphone simulation setting, so when in the cockpit, you have a simulated noise cancellation. With your sound pack, though, the wind is way too loud. Is it fixable by you? I don't want to reduce the whole environment sounds just for that.

Chris Nix

reading 1.7 installing notes, which build,py needs to be executed on A32NX ? default or the new one from S-Pack, thanks

Seth

🤔

K AKAIO

try the new version , the View angles are adjusted more ( on Wwise ) but i can't confirm on FS2020 because there isn't many custom interior Cabin camera views ( only 2 Wing view )

K AKAIO

Interior sounds play when zooming into cockpit section outside.

S37E174

I have no engine sound inside the cockpit with the A32NX.

Shado Da

I still have cockpit sounds inside the cabin. Same sounds next to the engine as inside the cockpit.

Pa Bas

Do I again need reduce the engine sound inside MSFS menu to 20-30%?

Pa Bas

sure

K AKAIO

Can you add the no smoking and seat belt sign chime? Im using it with the A32NX mod.

esm920


Related Creators