NokiMo
FTSIM
FTSIM

patreon


B747Genx_Sp (X-Plane)

# INFO :


# What's Inside :


# New Changes :

v1.75(24/Dec/2023)

💡 Startup in XPL11 may not be accurate

💡 Shutdown in XPL 12 will not work as configured ( issue from SSG Datarefs ) 

v1.74(25/Aug/2023)

v1.73(20/Nov/2022)

.....



# Available Links :

v1.75


Older Releases

v1.74

v1.73


# Notes :

For a faster update of the SSG Aircraft :

👉 Step n°1/ is just to speed up the SSG update and to skip the re-downloading of the "XDreamEngine"



B747Genx_Sp (X-Plane)

Comments

I don't really understand the installation instructions. I don't have an "xDreamEngine" folder in the plugins folder of my ssg 747. Do I have to create one? And what should be in the xDreamEngine folder? And in the picture I see a "new folder". Is that the folder that renamed to "xDreamEngine" or is that an extra folder? I have the SSG 748 V2.8rc1. Can someone explain it to me please?

Elias Fink

Appreciate the amazing work! Would it be possible though to update it for the SSG V2.8? Thanks!

Adrian

The engines sound on ground and on airborne with slow speeds are too quiet or the winds sound are too loud. Either way the engines are being drowned out by winds, hope you can fix that.

Lukas Lakiasuo

There is an issue with this pack I believe. I have constant thunder & lightning sounds from take off to landing even with clear weather assigned in XPlane11.

Cory S

Hey! This sound pack completely breaks down the whole plane (2.5.1_XP11) for me. Everything is dead and no sound at all. Tried both 1.73 and 1.72, no luck at all. Sound pack for Toils and Zibo work amazingly

Stepan

Not Compatible yet ⏳

K AKAIO

Does it work in XP12

Only4Cmers

Fixing ...

K AKAIO

Hi, I have a problem with the newest 2.5 update, if i turn on hydraulics outside i can hear them but after that they never turn off, if i play a replay and come back then i find them turned off.

Giordano Corradini

Does it work with Version 2.5 of the SSG ?

Sven Woddy

The Sounds Works fine even on the latest SSG update 1/ Make sure the "fmod" folder is installed correctly ( inside the Aircraft Main folder ) 2/ check the SGG volumes ( see the "B747_Sp(Genx).pdf" )

K AKAIO

Will there be a fix for this soundpack? The SSG does not work when I follow instructions and put the xDreamEngine folder in another place.

Edvin Turkic

will check it out , also make sure the MSFS "WARNING" volume is High

K AKAIO

do you know why the callouts sounds on landing are very low?

Maxence Coupin

Updating the SSG : 1/ Restore the "XDreamEngine" inside it's default location ( inside "plugins" folder ) 2/ Delete the "SASL_SSGB748" from the "plugins" folder 3/ Update the aircraft 4/ Re-install the Sound Pack

K AKAIO

Was just about to come in here and report that the soundpack is incompatible with the 2.4 version of the aircraft. Then I noticed you're working on updates. Can't wait for a fix, the SSG becomes a new aircraft with this soundpack.

Edvin Turkic

v2.2r4 ?

K AKAIO

Can you update this for SSG version 2.4 please?!

Shane Tillekeratne

yes , will remove the older version

K AKAIO

Jonathan Ramos

if you have the older SSG v1.9 then use that configuration

K AKAIO

For the SSG 747-8, do I use only the v1.71 file or do I use that + the v1.9 SSG configuration ?

Edvin Turkic

Disregard - the volumes were all turned down :-)

Martin Niederschelp

Hello, just tried this soundpack on XP11 / SSG 2.3.1. After install like in the text file I don´t have any sounds in the cockpit or outside the aircraft at all.

Martin Niederschelp

SeatBelt ? it is working but not too loud when the cabin door is closed

K AKAIO

Wonderful! The only small issue i found is the cabin chime in the intercontinental isn't working. Besides that topnotch to me, thank you!

Yves Schlapbach

Thanks 😊. Just a question. Can you add (5) callout on boeing airliners or this cant be done without modding the aircraft.cfg ??

Ahmad Jamal

😊 no worries , MSFS version will be ready in few days after finishing older requests first

K AKAIO

my eyes couldn't believe it when i saw an update on the 747 as requested ,soon after i realized its for x plane. :0

Ahmad Jamal

coming soon for MSFS , this update for x-Plane version and it was requested a while ago

K AKAIO

MSFS ??

Ahmad Jamal

SSG ? if yes ! then what is the aircraft version ?

K AKAIO

No Buttons sounds however the switches sounds works ok, is this normal behaviour? thank you.

Rusny

love too , me and my friends usually spotting from far away 😭 only for some occasion to be close . You can helps us with any new samples , even for some amount if you want .

K AKAIO

Hey I work around 748 all the time If you want some sound samples such as apu and engine start up and more also 777 and 744 sounds let me know. You can contact me better through Instagram also airside ord.

David O'Halloran

Noted ! , checking soon

K AKAIO

hello, I have noticed that there is no engine spool down sound. As soon as engines are cut off they are quiet

Ryan Klempin

yes ! , i forgot to mention it on the ".txt" file that you need to relocate the "xDreamEngine" folder (Exp : move it inside a new folder)

K AKAIO

Hello. The instructions in the post say that I should relocate the "xDreamEngine" folder, while the instructions within the file do not mention it. Do I have to replace it? What about Fix (SSG), should I apply the fix after downloading v1.6?

Eduardo Holanda

1 / open the SSG_B748-xxx.snd with ".txt" editor 2/ look for this Parameter BEGIN_SOUND_SPACE SOUND_INDEX 0 BLEND_DEPTH 0.2 AABB -3.4 -1.8 -31 3.4 5.8 30 END_SOUND_SPACE 3/ Change the first value "-3.4" to -10 and the 4th value "3.4" to 10 You can add or Reduce the -10/10 as you want = it will make the interior sound space wider But for the Elevation change the 5th value "5.8" to 10 or more

K AKAIO

Hi! Love the sounds. Is there a way to enable the interior sounds when using wingviews etc? Setting a wingview means I need to move outside the fuselage (otherwise it will appear blue) and that enables the exterior sounds.

SnazMC [Millz K]

check the Volumes on the PAD ( More info on the "B747Genx_Sp.pdf" file

K AKAIO

Fantastic sounds ! However I noticed version 1.6 of this soundset is silent . I named the .snd file the same as the .acf , made sure my sound volumes are up, and I did a correct installation and still getting no sound . I Also tried the “Fix(SSG)” and 1.6 is still silent

Heliplane380

not sure ! maybe is too heavy 😄 , or the Parking brake is still on ! , you can ask on Discord then you'ill get more help if not you can make a comment in SSG Posts on "https://forums.x-plane.org"

K AKAIO

Hi there first of all excellent work on the sounds of this aircraft makes it really flyable. However I've noticed when I want to taxi the aircraft to a runway or to a gate it does not want to move at all. If anyone here or the dev can help with this problem that would be really helpful I would love to take this lovely plane up in the air. Many thanks in advance.

testflight357

Yes !! You need to remove "xdreamengine" from the "plugins" folder (or place in another location ) to disable the Default engine sounds Note : the "Xdreamengine" have only the Engines , autopilot warning & Avionics sounds Hint : > do not delete the "xdreamengine" because you'll need it when updating the Aircraft - You can move it inside "SASL_SSGB748" or "FJCC'" or ... then before updating the Aircraft just restore it to its default location for a fast update

K AKAIO

With version 1.6 im guessing we aren't supposed to delete the Xdreamengine like with previous versions? The problem with this is it leaves the constant hissing of the default engines which ruins things slightly.

John Hodgson

Use the SSG PAD Volumes ( It was noted also in the .PDF file ) , just select "DEFAULT SETTINGS" on the "SOUNDS Page for quick volume change

K AKAIO

Hi, I can't hear any sound at all, no switches, no levers, no systems, anything. Replaced xLua folder, checked snd name with acf name, XP sounds on, all good, I'm totally lost.

alexcolka

did you removed the old xLua folder also ?

K AKAIO

I hear no sounds like avionics etc. I can hear the buttons and switches but no avionics. I removed the old 1.5 fmod sounds and then I installed 1.6 but no avionics sounds. All sounds are set to max (x plane menu and tablet). It must be something in xlua

Alex1985

- Yeah ... the ground noises are a bit soft, i'm always adding new ones every update , it just need more cockpit shaking noises - Check the "Aircraft Exterior" volume maybe it is a bit lower , if you mean the "Exteriors" are quiet on Distance ! , i can re-edit the View Parameters .

K AKAIO

I just completed a flight with this sound pack. The interior sound is great, but I noticed there was no sound upon landing, I actually couldn't tell the moment I touched the runway. Also, the exterior sound seems a lot lower than the interior.

Yosri Al-Kishawi

why are you trying to extract it ? , if you Need some (.wav) files just ask 🙂

K AKAIO

Yes , they are a bit similar only on the"Low Spooling" Phase

K AKAIO

sounds just like the ge-90 lol

Daniel Oviedo

Weather.bank is giving me an unspecified error when extracting.

Vee

Will do

K AKAIO

Hope it updates which match v2.2

J.Ramsey7

Only Engine sounds ? - if Yes : Check the x-Plane volumes if all the sounds are not working ! - Maybe wrong install ?

K AKAIO

I get no engine sounds with this?

DJSean00

did not update my B748 yet , maybe SSG changed some controls DataRefs

K AKAIO

Hi is it me or with new SSG 748 v2.2 some switches sounds are gone? With SSG 748 v2.1.2 everything was fine

alexcolka

fixed

K AKAIO

Unfortunately the SSG link is also broken...

FS Ricy

will be fixed and re-uploaded (v1.33)

K AKAIO

I noticed a small issue on the SSG 747 v2 - the engine sound sometimes disappear after entering replay mode, and will not continue even after exiting it. It usually happens if I rewind the time to the beginning of the flight, regardless of its length. Otherwise, great stuff, thanks a lot :)

Andras Matisz

yes it will be re-uploaded , but not sure why i removed the link 🤔... , maybe something to fix

K AKAIO

Hi, Unfortunately, the link for the stock 747 is broken.

Andras Matisz

The 747 GenX soundpack is really great but there are some issues I have in the SSG 747v2. There is no sound when I turn on the packs (no airbleed sound). The fuel pump switches have no sound. The FMC has no buttons sound. A fire test sound would be great. And a really important sound is missing: The Autopilot disconnect sound is missing. During replay the sounds do not work and when I disable replay the sounds don't work correctly anymore. Overall it is a great soundpack and I love it. These little bugs should be fixed, please :) Thanks in advance

Alex1985

Could you make a 747-400 GE sound pack?

Drone Tutorials and More

will make another update

K AKAIO

only at idle ? , 1/ be sure that the "xDreamEngine" is Disabled or removed from the plugins folder 2/ Check the XPL "Aircraft Exterior" volume slider

K AKAIO

Hi, great work but ive found that when i idle the throttles there is no external engine sounds. this doesn't happen on the rest of your great soundpacks? Is it a common issue?

Oliver Elsworth

i like to spool up sounds but at toga they just sound like fsx quality , not very nice, rest of it is fine thou

Nick Buick

And the clicking stopped. Thank you! Works perfect...👍👌 your soundpack is the only reason i now enjoy flying the SSG 747-8. Its a world of a difference!

Ricky Rialto

FTSim+ Sorry , it was the Vertical speed knob it will always rotate when selecting VNAV on this Aircraft , fixing & Re-uploading ...

K AKAIO

I dont want to sound all negative. Sorry if that what it sounds like. The sounds other than the clicking are awesome👌, but clicking makes me crazy. 🥴

Ricky Rialto

The clicking sound doesn´t go away even using the "Disable MCP" and the 1.3.1 update. The clicking sound starts as soon as i activate VNAV and then it keeps clicking like hell all the time during take-off and landing. It also keeps clicking sporadic during flight. I use the SSG v2.1.1. Please get that issue fixed

Ricky Rialto

Use "Disable MCP" attached above : it will disable all Autopilot buttons but keep only the ND & EICAS

K AKAIO

I'm still getting that clicking sound in the climb and descent, even with the FMOD edit(?).

Lee B

use "Disable Rotary knobs" , think it's altitude Rotary Knob

K AKAIO

Ok, its happening on the climb and/or as I click on the ALT button to initiate climb

Praanot Kokkate

Works great too - but I noticed a clicking sound that comes and goes. It only started I think once I started my engine or post take off.

Praanot Kokkate

Works great in both default and SSG, great work!

Supgod10

DreamEngine ? , you should remove it when installing fmod

K AKAIO

These work GREAT in the SSG V2 plane -- thank you so much! I've been annoyed that I can't use it in Vulkan because of DreamEngine sounds, however these sounds are WAY better!

Storm Walker

Also getting default sounds when I Install

Supgod10

Great , thanks

K AKAIO

fmod do not work on XPL10 !! , or you mean XPL11 ?

K AKAIO

It works in V2 very well. Thank you. If you want to hear the sounds here is a video of it https://www.youtube.com/watch?v=oFzBp4wA0Hk

XPlane1972

just installed but getting xp10 default sounds now .... followed install correctly

Nick Buick

I could be wrong but I believe they don't have the v2 as they were asking others if there were any issues - so if you have v2, I'd test it and hopefully we can do the testing for them

Johny McFace

also in v2 is everything is correct !! ... like the cockpit sounds position ? or Bottons ?

K AKAIO

Make a copy of the "SSG_B748-I_11.snd" and rename it to "SSG_B748-F_11.snd"

K AKAIO

until i check it more !! : - open the fmod folder\SSG_B748-I_11.snd with NotePad++ - Delete this line : "BEGIN_SOUND_ATTACHMENT EVENT_NAME /Cockpit/Controls/T2 VEH_XYZ 0 4.2 -29.5 EVENT_START_COND ABS_DELTA=sim/cockpit2/autopilot/altitude_dial_ft > 1 EVENT_END_COND ABS_DELTA=sim/cockpit2/autopilot/altitude_dial_ft < 0.5 "END_SOUND_ATTACHMENT

K AKAIO

Hi, cant seem to get the sounds to work with the V1 freighter. Work well with the pax version. Is there a fix for this? Thanks

Paul Dulson

I have clicking sounds during the climb and descent. Seems to do with altitude knob.

XPlane1972

Sounds seem to work with V2 but exterior sounds in flight are fairly quiet. Otherwise brilliant!! Thanks.

Paul Dulson

Sounds awesome! Can we expect a version for the 747v2? Thanks so much!

Sam Coole


Related Creators