08 ANIMATION - HAIRY
Added 2020-03-03 16:33:33 +0000 UTCSo you where asking for this project:
https://www.behance.net/gallery/74713167/IMAT
And here is my updated version, also you don't need any plugins. Plus I made a R20 and R21 version.
And again sorry for the bad audio quality.
Also here is the file:
https://www.dropbox.com/sh/vl2k8hb1gz3gf1y/AADfQBYgftuO6-oydEq24leTa?dl=0
Comments
Really hard to find the solution like that. I meant a redshift tag.
Vincent Schwenk
2022-05-06 08:16:35 +0000 UTCSubdiv on what? I just traced emitter couple times (like you showed in this tutorial) and made a ball with this tracer. (Just group of converted tracers). Then i put this ball in grid cloner, put counts like 5x5x5 and cinema stops responding. But when I see your IMAT scene with dozens of those balls... really wondering why my computer cant do that =(
Арсений Голышкин
2022-05-06 08:08:00 +0000 UTCHard to say, your specs are good. Perhaps too many subdivisions
Vincent Schwenk
2022-05-06 08:02:19 +0000 UTCHello! Super fun tutorial, thanks a lot! Just one question. How do you made this picture for IMAT with so tight furballs? like... i tried to put my traced furball (consists of 4 splines) in cloner, but it died really fast. Is there any trick except upgrading computer (amd ryzen 9 x5900, 3070, 32gb ram)
Арсений Голышкин
2022-05-06 07:29:39 +0000 UTCHi, when I'm texturing my tracer spline with a gradient it doesn't work and it displays black in the render view. I'm using a RS default texture with a ramp on the diffuse channel. My redshift tag is on the spline and the hair strands is activated. How do you manage to properly texture it with a ramp ?
Romuald K
2022-04-12 16:00:11 +0000 UTCYou need an Octane tag, same as if you would render hair
Vincent Schwenk
2021-04-30 06:21:33 +0000 UTCHello Im a bit new at this and Im using octane as my render, but i dont know how to apply the material to the tracer, thank you so much!
Fernando Monroy
2021-04-30 02:30:37 +0000 UTCI had the same problem - the solution for me was to lower the speed of the particles to 50 and add a turbulence. Then it worked perfectly. Also off-setting the emitter or force field by like .5 cm also worked. I think the problem was that the emitter and force was at the exact same position, and with high emission speed the particles just fly away. Maybe there are other things going on under the hood but this worked for me at least! :)
Oscar Cravalli
2021-01-19 14:08:24 +0000 UTCI'm having this same issue, it looks like under the original or dust section there is a field force with two spherical fields and two random fields which is effecting the emitter in addition to the added field force but since we can't see the settings or how to set it up its very confusing :(
Emma Brown
2020-08-31 23:49:26 +0000 UTCDid you find a solution? Currently having the same problem
Emma Brown
2020-08-31 23:22:28 +0000 UTCI can check that soon, right now I am in the middle of a stressful job😂 Sorry if there any problems.
Vincent Schwenk
2020-07-18 20:57:11 +0000 UTCYou seem to have made a mistake with the R21 version. I wonder if there's something in one of those nulls that is affecting the output cause when we follow the tutorial step for step it doesnt look the same. Also the R21 C4D file on dropbox looks to be the same as R20 version :)
Mike Lamont
2020-07-18 20:51:46 +0000 UTChey, both files looks like have been done without filed force
MRSIMONSKAY
2020-06-17 22:31:25 +0000 UTCHey Austin, perhaps you can rewatch it and crest a new scene. Also perhaps you have to play with your strength value of the field force. (You could try a negative value)
Vincent Schwenk
2020-06-06 15:07:20 +0000 UTCHi, I am working in R21 I can't get past the first stage, when I try to apply the emitter into the spherical field, the emitters don't form a loop, they just fly straight out, help, please. (timestamp 21:25)
Austin R Pinilla Allen
2020-06-06 14:17:35 +0000 UTCHey Vincent, thanks for the tutorial. I only see an .xml version of log_08_HAIRYR21_01. Would you be able to re-upload that c4d file? I'm trying to figure out why my field force isn't acting the same as yours. Cheers!
sam care
2020-05-17 20:16:47 +0000 UTCThank you Kelly😊
Vincent Schwenk
2020-05-17 09:21:53 +0000 UTCThat IMAT work is freaking insane! Soooo beautiful!
MoGiraffe
2020-05-17 02:05:11 +0000 UTCHey Finn, the file _01 is R20 the file _02 is R21 Cheers
Vincent Schwenk
2020-05-04 19:35:58 +0000 UTCHi, Cool tutorial, but i don't see the R21 files in the dropbox?
Finn Berenbroek
2020-05-03 08:56:41 +0000 UTCNot yet, usually I don't work at the weekend
Vincent Schwenk
2020-03-16 07:50:22 +0000 UTCSent (check your fb account), not sure you saw it?
Killan
2020-03-16 04:14:30 +0000 UTCCan you send me your scene
Vincent Schwenk
2020-03-14 17:14:16 +0000 UTCImpossible to ge it to work with the Field Force approach for R21. I copy every step until you press play to show how it looks with the tracer&emitter and I do not get the same result> straight lines growing from the center and never coming back. Helppp
Killan
2020-03-14 17:07:39 +0000 UTCI watch it on chrome and it works fine
Max Salzborn
2020-03-07 07:59:38 +0000 UTCVimeo can be buggy from time to time. Just tested it in the phone, there it works fine. Sorry for the inconveniences.
Vincent Schwenk
2020-03-06 22:42:32 +0000 UTCsame here
Kreslit
2020-03-06 20:32:20 +0000 UTCVimeo always stops/buffers the video after around 3-4 minutes. I have to refresh my page and skip to where I was to solve this. It is kind of annoying. Do you others have this problem too or is it just me? Any hints? (Testet in safari and chrome. Autoresolution. YouTube for example works flawless meanwhile)
Martin Köhler
2020-03-06 14:27:18 +0000 UTCi think you should be able to just use the cinema hair + hair material. and render it with f.e. cinema's physical renderer. it's just slower than redshift …
Martin Köhler
2020-03-04 16:53:10 +0000 UTCIs it possible to do this without redshift or octane?
herb piper
2020-03-04 09:26:36 +0000 UTCHi Vincent,would you share the techniques to create an animation of hair growing on the surface.
Zhemin Wang
2020-03-04 04:17:12 +0000 UTC
![Dianus [nonhumans]](https://nokimo.com/istorage/33201.jpg)
