NokiMo
3DArtGuy
3DArtGuy

patreon


Tier 3 Miniature Gallery

Hi, 

This is a public gallery for some of the miniature designs available in my Tier 3 welcome pack.  The welcome pack grows as time goes on!  

New patrons can find the Tier Reward links in my front page 'about 3DArtGuy' section.  If you expand the blurb and go past the introduction and FAQ, you will see the Tier Reward Page link.  Tier 3 always contains the full set of items for a monthly release.  Tier 2 contains a subset.

You can find all my other designs here.  Patrons get massive discounts!  

Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery Tier 3 Miniature Gallery

Comments

Can you make sure we get all of your models on MMF that we have gotten here?

PheonixKnight

Hi, I PM'd you about this.

3DArtGuy

I just signed up for Tier 3. Could I get the links please? Thanks.

Hi, I PM'd you about this.

3DArtGuy

How do I get discounts on MyMiniFactory? Do I apply coupon or are the discounts already counted?

SuHun Lee

Hi, I PM'd you about this.

3DArtGuy

Hi, just signed up for T3, could you kindly send link to files please.

Hi, I PM'd you about this.

3DArtGuy

hey, how can i download this files

Love the sculpt for the berzerker, but it seems like about half the meshes are non-manifold and have lots of holes? I have to fix them most of the tiem it seems.

James Sovlinsky

Hi, all presupported versions of the project will be available later in September.

3DArtGuy

I have downloaded the pre-supported base for the Cyborg Angel Diorama but I don't see the pre-supported parts for the diorama which I assume includes the actual figure... Is this available or will it be released later this month?

Calcifer

Hi, I PM'd you about this.

3DArtGuy

I just joined to my first patreon. Your work is amazing. Where can I find the file of DK holding chopped head?

Hi, I PM'd you about this.

3DArtGuy

I would also like to request this assistence.

Cowen

You're welcome, glad you like the designs! 👍

3DArtGuy

I was able to access the welcome pack through the email link and the sculpts are beautiful. I am so glad I found this creator and the quality of your sculpts. The amount of models for Tier 3 is awesome. Thank you

Torrg

Hi, I PM'd you about this.

3DArtGuy

Could you help me to find out the link to download the welcome pack, august pack etc.. please?

ShinJae Lee

Hi, I PM'd you about this.

3DArtGuy

New here as well, I guess I can't find the links for anything even though Tier 3 said for everything...

AODfan

Hi, I PM'd you about this.

3DArtGuy

Same as all the other can't find the link ;-) was waiting for the stuff to drop in the mail on MMF but only found the august model there.

LittleJimbo

Hi, I PM'd you about this.

3DArtGuy

Hi there looking for the welcome pack and current release link. I seem to be having the same issue as others

Hi, I PM'd you about this.

3DArtGuy

Hi! First-time supporter, and really love your work :D!! I dind't found some of your models from the past, I thought everything was incluided...How can I get the Vampire, Bounty Hunter riding Cyberhorse, etc.. Thank you :)

Hi, I PM'd you about this.

3DArtGuy

Hi just joined tier 3, can someone point me to the files please 😁

Thanks! 👍 I PM'd you about this.

3DArtGuy

hey there, found you from a group and just joined, how does one acquire the t3 rewards after joining?(fantastic work btw!)

Thank you very much! 👍

3DArtGuy

Was recommended your patreon in one of my 3d printing groups. Glad to be supporting your amazing work.

John P Patrick

Hi, I PM'd you about this.

3DArtGuy

Where i can find the Base of the Desire Demon ?

Denny Kunz

Hi, I PM'd you about this.

3DArtGuy

Looking for link for Aug stl. Thanks

Hi, I PM'd you about this.

3DArtGuy

Hi, I PM'd you about this.

3DArtGuy

HI, amazing looking sculpts. Could I get a link to the welcome pack please? The link I clicked just brings me here :(

stu humphreys

So I clicked on something that said that welcome pack was here but I don't see welcome pack I need help finding it thanks

Lisa Kellogg

Hello, Like everyone else I can't seem to find the download link.

Uriah Ronin

Thanks! 👍

3DArtGuy

She is awesome. I will now have to buy a larger resin printer so I can print her out statue scale. Great work.

Thomas Sholar

Hi, I PM'd you about this.

3DArtGuy

Hey @3dArtGuy I'm looking for the Red Riding Hood ( https://i.etsystatic.com/icm/e229d2/364801915/icm_fullxfull.364801915_jqcj0z0qmrk40skgss0c.jpg?version=0 ) shown here, just subbed at a tier 3, and was curious if this was availiable, didn't see it on MMF

Hi, I PM'd you about this.

3DArtGuy

I just backed... How do I get a download link? When I click the link it takes me to a public page?

Paul Gibson

Hi Diego, I PM'd you about this.

3DArtGuy

Hello! First-time supporter, and really your work is amazing! I was downloading the Tier 3 pack and I saw that in May 2021 pack there are only the 2 barbarians, while Tier 2 also contains the Vampire. I'm also interested in the newbie pack.

Hi, I PM'd you about this.

3DArtGuy

New supporter to your page! Thanks for all the awesome models, but how to I access the newbie welcome pack? Thank you in advance for your time!

Hi, I PM'd you about this.

3DArtGuy

Hello! What is the name for multy'arms snake-girl, and what is her size?

Hi, I PM'd you about this.

3DArtGuy

Another newb needing a link to the welcome pack :) Found my way here after seeing your discount on MMF and checking some of your models out. Looking forward to getting some of them printed/painted.

Jon Hammersley

Hi, I PM'd you about this.

3DArtGuy

Good day Sir! How would I go about getting the key sculpts issued in Oct and Nov 2020? I subscribed to you for those two months for the Badass Ladies and Sultry Sirens pack, but lost my HD back in Jan. I tried to PM you but that does not seem to be an option as it just cycles... Thanks in advance.

Yellow Sign Studio

Hi Pierre, I PM'd you about this.

3DArtGuy

Same here... I can not find the "about section" you're talking about ! Must be blind :)

Pierre Emmanuel RICHET

Hi Chris, I PM'd you about this.

3DArtGuy

Im a bit lost here, where do I download the tier 3 welcome pack

Chris Alexander

Thanks, glad you like the designs! 👍 I PM'd you about your inquiry.

3DArtGuy

Hi 3dArtGuy! Ive funded a couple of different groups who do something like you do, make 3d models for resin and put them on a Patreon...but none of them come close to you. I was floored by your talent when I found you. A lot of these guys out there are genuinely really quite good but you are lightyears beyond them. Your proportions are impeccable, composition amazing, form and implied motion completely natural. I am floored. A few bucks a month is criminally cheap for modelling of this caliber. So thank you for that! I do have a question about a few of the models in the pictures which I couldnt seem to find like those in pictures 1, 10, 11, and 18? Perhaps I missed them. Thank you again and I cant wait to see what you come up with next!

Hi, I PM'd you about this.

3DArtGuy

Hi. I am a new supporter as of a few moments ago and I would like to also echo Christian Christiansen's above comment regarding the "RageDemonSideOne" and whether it is part of the models in Tier 3? There's a jpg file of it when following the Tier 3 downloads link to Sync and it is located near the top of the February2021_Zealot folder, which indicates it is available until April 16, 2021.

Dan Fuller

Hi, I PM'd you about this.

3DArtGuy

Hi, is the "RageDemonSideOne" not part of the welcome pack, it is in the 25 picture from the Tier 3 Miniature Gallery. But in the Tier 3 February2021_Zealot folder I can only find the jpg?

Hi, I PM'd you about this.

3DArtGuy

Hello! The Models are breathtaking.I'm so glad i managed to find you.

Hiya , can you PM me the link for the welcome pack please? I think I have missed a few ( angel with 2 swords as the others have mentioned ). Thanks

Matthew Mills

Hi, I PM'd you about this.

3DArtGuy

The first image, the winged lady standing in fire with a sword - Can't seem to locate it in the pack? Any hints at where I can find it :D?

Hi, I PM'd you about this.

3DArtGuy

I have a question. The 5th picture in this gallery. The angel with the two swords. Where do i find this model in the pack? I do not find it.

Adilos Cantürk

👍

3DArtGuy

and now i am subed, love the look of these can't wait to print them

I've purchased from you on MMF in the past, and just subbed for December. FWIW, a non subscriber couldn;t even see what the December offerings even were.. the only thing I could see was the tier 3 welcome pack, which included a few models I wanted. I couldn't see a mention at all of dark unity, and there were also not even any posts on your facebook page of your december offering.

Gareee

Thank you, glad you like the designs! 👍

3DArtGuy

i just wanted to say this is my first sub. Your stuff is amazing and i look forward to more!

Ashley Perez

I prefer 40k designs. But also those of fantasy.

Albert Boada Casternado

https://images.app.goo.gl/FYXc71RcfS99ZqeZ6

Albert Boada Casternado

Hi, I am interested in buying some of your figs in the MyMiniFig store, how do I get the discount?

Gary Harding

Hello, I'm new as well and if you could PM me on DL process for Tier 3 it would be appreciated! Also your work is simply amazing! I cant wait!

Hi Valtier, PM'd you about this.

3DArtGuy

Hi, I'm new to the patreon page and wondered how to download the welcome pack :) Thanks in advance!

Valtier Lausberg

Hi tchukky, PM'd you about this.

3DArtGuy

Hello, i m a new contributor. How i can download the welcom pack? Thx.

Hi Jakub, yes it is printable for tabletop size.

3DArtGuy

Truly beautiful work! I will repeat a question by MuneyMaker though, are they printable in 28/32mm for tabletop? Specifically the Angel of Glory version 1 (its the one with diorama, right)?

Thanks!

3DArtGuy

Beautiful. Amazing detail work. Just. Wow.

Alex A

Hi Frank, PM'd you about this.

3DArtGuy

hello, i dont find the terrain for the archangel? It was only available in june? I would like to print the diorama in fact.

frank desprez

Thank you! I try to make the designs flexible enough to be tabletop and display pieces. 😊

3DArtGuy

These sculpts are amazing. Definitely I think they would be best as display pieces. They seem to have more realistic scale too.

Ashley Beech

Hi Alex, I PM'd you about this.

3DArtGuy

Hi 3DArtGuy! Did I join too late to receive June? Keep up the amazing work!

Alex Perez

Hello, how about to scale down to print that cool mini on sla printers? which scale are minimal?

Blind Priest

Thanks, glad you like the designs! PM'd you about your question.

3DArtGuy

Just joined up, fantastic figure works!! Is there a code for the MyMiniFactory discount or is it automatic once you sign up for the Patreon? Thanks!!

StarWarsGeek

Thanks! PM'd you about this.

3DArtGuy

Amazing miniature! Just to clarify, is this intended for a certain height? I mean, is it feasible to print it in 28-32 mm or the level of detail would prove fatal? Thanks a lot and good job mate!

MuneyMaker

Hi Ronan, I have PM'd you about this.

3DArtGuy

I see a chaos knight on myminifactory with the alternate helm. It is included in the welcome pack but not as the full model thats showing on that site. Is that particular full model only available there? I don't mind supporting you I just thought I would ask to clarify.

Ronan Abbott

thanks!

Simone Spinozzi

What scale is the Chaos knight?

Hi Cholubin, I PM'd you about this.

3DArtGuy

Where can I get a MMF discount code?

Cholubin Bido

It's actually really easy to get into 3D printing. I didn't know how to do it a year ago and now I'm churning them out non stop. Just google Amazon Monoprice Select Mini V2 and PLA Filament 1.75mm PLA. Great for beginners!

3DArtGuy

Thanks, glad you like them!

3DArtGuy

Those models are sweet!

Dominick

If I ever get a 3D printer, I'm going to grab all those.

Bester

Thanks!

3DArtGuy

lots and lots of neat stuff ❤️

Simone Spinozzi


Related Creators