NokiMo
ArtisanGuild
ArtisanGuild

patreon


The Bloodhunt - January 2022 Set

This Set is from a previous month, but you can still Buy the STL in our Shop.

Changelog: Presupported Terrain is now available on MYB and is uploading on SYNC too! Thanks for your patience :)

Hail dear Adventurers and Merchants, and welcome to a new year at Artisan Guild!
We hope you spent some great holydays.

The first set of the new year is The Bloodhunt, a very ancient order of noble Vampires Knights voted to the Tyrant-God Tialevor himself.
As you can imagine, these modular figures are coming with and without helmets, and a variety of weapons is available to them.
Dynamic and terrific beasties such the Bloodfiend (giants bats) are the Monster/Cavalry unit of the month coming also as standalone monsters, same thing for the heroic mount Vampiric Barbajiann (an ancient Barn Owl).
Cavalry saddles are always of the same size, so you can mix riders and beasts from any release since we started doing them.

THE BLOODHUNT - LORE

Bloodhunt Knights (Modular Unit)
The Bloodhunt Knights were the first Soulless Vampire troops to be sent to the mortal lands of Rotvar when Tialevor's Arcanists succeeded in recreating the Astral Portals used by demons during the ancient invasions.
Thanks to the portals, the Tyrant-God's troops were finally able to cross the spiritual barrier between Aera and Rotvar, that barrier created by the Dragon-God Ghomirsacrifice to defend mortals from Tialevor. When they arrived on Rotvar, the Bloodhunt Knights, led by the sons of Drakenmir himself conquered the citadel of Rodburg after exterminating the entire population, a fortress hidden in a corroded and poisonous land scattered by graveyards hosting the countless victims of the demonic invasions of past ages. By taming the Bloodfiend bats and forging terrific blood infused Vampiric armors and weapons, the Drakenmiryan brothers and their court began to capture the souls of Rotvar's peoples in order to feed the Astral Portals, thus allowing the Tyrant-God to send more and more troops, until Rotvar too would fall into his hands!

Bloodhunt KNigts comes with and without helmets

Bloodfiend Raiders (Modular flying Cavalry Unit)
Bloodfiendsare large bat-like predators haunting the lands of Rodburg. It is said that the first bloodfiends were regular bats who absorbed the corruption of the first demonic invasions, converting them into blood thirsty flying fiends.

Bloodfiend bats comes with and without saddles, and their modular riders comes with and without helmets are modular.

Lenora Drakenmiryan (Lady of Darkness Hero)
Lenora is the first daughter of theDark Lord Drakenmir. After passing a brutal ritual required for a Vampire of noble heritage to ascend to Lord/Lady of Darkness, the highest rank of vampire nobility after Tialevor High Priest, Lenora was chosen together with her brother to lead the Bloodhunts Knights in their attack on the kingdom of Rodburg. After the great victory, Tialevor himself ordered Lenora to guard and defend the new settlement. Obeying the Tyrant-God, Lenora, at the command of her bloody knights and flying on her vampiric owl protects the citadel, providing a safe entry to the mortal lands for the troops of the Tialevor.

Vampiric Barbajiann (Heroic Mount)
It is said that before he was corrupted by the Vampires, this majestic owl was a spirit protector of the sacred Yaldain tree. As loyal servant of the vampire king, he was entrusted to Lenora to help the Bloodhunt Knight in the conquest of Rotvar. Thanks to his perfect eyesight and supernatural senses, he flies through the lands of surrounding the Citadel of Rodburg, killing any threat that dares approach the new vampire domain.

Vladkeron Drakenmiryan (Lord of Darkness Hero)
Vladkeron is Drakenmir second son. After going through the terrific Soul Fasting ritual and thus converting himself to a Vampire Lord, his anger and strength was even greater, showing no mercy and total cruelty against the people of Rodburg in Rotvar. Tialevor orders were clear: Vladkeron had to lead the vanguard of Bloodhunt Knights with the sacred mission of capturing souls in the lands of Rotvar, so that those souls can be used to feed the Arcane Portals and expand the dominion of the Tyrant-God by sending new troops. Obeying Tialevor, Vladkeron start the cruel Blood Hunt, haunting the lands of Rotvar in constant search of souls to sacrifice, hoping in this way to prove his fater his worth to ascend as successor.

Akela the Cursed (Fantasy Pinup)
Soulless who fail to pass the Soul Fasting ritual converts into cursed demons with the wings of a bat. Sent all over Rotvar, these flying creatures hid in the shadows of the night; their beauty bewitches even the strongest spirits, devouring their souls and draining every drop of blood from the unfortunate. After awakening from a centennial sleep, Akela, the first of her cursed species, is driven by an insatiable thirst for souls and blood.

Graveyard Ruins (Scatter Terrain)
Surrounding the Rodburg Citadel, labyrinthic graveyard ruins are scattered across the corrupted lands, hosting crypts and sacrophages of the countless victims of the demonic invasions of past ages.

And the Weapons!

And here the complete lineup:

WELCOME BOX AND GUILDS (game)!

Our Welcome Box is always available for our patrons.
We are updating it by rotating some of the models and adding some new torso probably by february!
The last version of the game GUILDS is finally live!
Here you can download the latest PDFs here.
GUILDS is a bonus for our dear patrons, and feel free to make any gameplay video or battle report, we would gladly watch them!

GUILD MEMBERS DISCOUNT CODES

Need Help? Join our Discord!

If you have any kind of trouble or feedback about Pre-Supported files, don't exitate to tag @Sephiroa, @Omn0mm and @Risc66 in the pre-supported channel in our Discord.
In any case, Lychee allows you to edit supports and export again as STL to slice in chitubox.

At the end of each month we send the full patrons list to MyMiniFactory.
If for any reason you are missing a set of minis you received here on Patreon by supporting us, you can send them an email on info@myminifactory.com, they will get back to you in few hours.

PAINTING CONTEST

As always, we will run painting contests soon in our communities: you can tag us in our Instagram page, or participate the contest through Discord or our Facebook patrons group.

Happy printing guys, and happy new year!

The Bloodhunt - January 2022 Set

Comments

Hello, where can I find how to play with it on table? Can't find any guide

raphael fassotte

Hi, everyone! MMF is having a bit of a delay with the January distribution. We apologize for any inconvenience this may cause.

Artisan Guild

I'm also missing mine, usually they get added on the 15th of the month so hopefully it gets sorted soon

Lachie Robertson

Still missing mine as well. Hopefully they will fix this issue soon.

Lorenzo Vasquez

Hello! I have not received these in my MMF library yet. Is there an issue with them being added?

CupcakeKittenExplosion

Still missing in my MMF as well

Ian

I have emailed you and MMF to get a copy paste reply several times now. Neither January or February are on MMF.

Stefan Vella

same

Bradley B

same

ethan.t

Same

Fabian Zweipfenning

I also need this on MMF and havent received it

Shawn Michaud

It was shared to me, but the link is broken and now it's not in my library

Rob van der Zanden

Same here, no MMF share (yet)

Ken Hylton

Is this going to be shared on MMF?

Benjamin Straube

Has this been shared with people on MMF? I can see that it's in their shop but it hasn't been shared with me...

Brooke

You'll get a backup link in a couple days, and the set on MMF when it drops if your email is the same as your patreon account, don't worry.

Giulio Robecchi

link isn't on MMF either

Christopher Rackley

The link was removed early?

Derrick Taylor

Missed it.

Cappo Zutti

yeah I missed it too... pretty crappy for these to be taken away before January ends.

Mo Hoffman

It looks like I missed the deadline for downloading this months STLs also (will teach me not to wait for last minute). I assume they will be put into my MMF account as past months have been.

Jeff Ekonen

I don't see the link either. I will grab I guess from MMF when it becomes available. Usually on the 2nd Artisan Guild would send a message with private link for download if the download in case it was missed. So no need to worry about it.

Cedric Boudoya

No download link, MMF does not have this release available to me. Where are we supposed to get these models?

Robert Miller

Same issue as a few others. Download link is MIA.

WubbaDuck

So I went back and looked at older releases to make sure the time frame was right, and to be sure that this post should have been the full release, it seems like itvwas. I also noticed that the download links are gone on older posts as well. I have not yet downloaded the January release. I also dont have the release from MMF either. What happened?

John P McGuire

Same. Still 4 hours left until February in my time zone (7 hours via official Patreon time).

Halo Noir

It's still January... why is the post saying this is "from a previous month"???

JJ

Guess I will jump on the bandwagon of posting I can't download these either!

Kypp Durron

Still should be able to download these, but I do not see the link any longer.

James Lohry

Where's the download link?

Lunavoco

I have been procrastinating downloading this month's STLs, it seems a few of us are having trouble getting access. Please let us know how we can get this beautiful set =)

AtomAuntyEm

I joined last week and wasn't able to check until now. Why can't I download this?

Kyle Peterson

Same situation here and others on discord getting the same

Zeemex

I just joined, but it says that this set is from a previous month. Is it not still January? I'm not seeing a link for the Bloodhunt anywhere else, or am I missing something?

Erik Bohl

I just joined and I'm a bit confused. For the Bloodhunters, are there stat blocks available?

Peter Nyznyk

not sure how much this matters, but the zip file says January 2021.

ARCTIC LAB SERVICES

Hi, Will! These will appear in your MyMiniFactory library early next month.

Artisan Guild

I just joined the Patreon today, will these show in my MMF or will I only get next months release?

Will

On a different note, i love the last few sculpts since i believe it was Brotherhood, The models i love them

Alynne Verschelde

I don't have them in my mmf either

Alynne Verschelde

Hi, Jack! Yes, you should already have the files in your library.

Artisan Guild

Where are the L hand non blood spell

Cody Thurley

Hi! Should these have been automatically shared on our MyMiniFactory accounts yet?

Jack Schofield

Hey Artisan Guild, Beautiful Work I have Reached out to MMF previously, however I don't seem to be on the list for the "shared with me" the only ones to show up have been back in November, and that's only after I tried to resolve this issue. Could you help me out?

Justin Land

Yes

Benjamin Engl

hey im having trouble getting the discount code to work on myminifactory. maybe im just not understanding the sentance, does "1 to 10 each month" mean it only works from the 1st to the 10th of each month?

Robert Johnson

The presupports are designed for resin printing, so they won't usually work on an FDM like the ender. Your best bet is to take the unsupported minis and support them using Cura

Thomas Klein

Hi, there! Trello will be updated next week, as part of the team is on vacation at the moment. Sorry for the inconvenience!

Artisan Guild

Not sure where to ask but any chance of the Trello board being updated with the Dragonpeak Barbarians? Use the renders for the merchant store and most of the ones on MMF have pre-support text on them

Dynamic Prints Studio

Hey guys, firstly thanks so much for the awesome content. Looking forward to getting my first prints painted! I have an issue however, the Vampiric Barbajiann Supported is not printing on my ender 3 v2. I have tested other files and they seem fine in the pack however the Vampiric Barbajiann just wont print. What should I do in this case?

Chris Davis

That's weird, it's still not working for you?

Artisan Guild

We will keep it in mind! :)

Artisan Guild

Gotta say, this months presupported have been the best I’ve used. They literally just pull off with very little work.

Shaun Dowdall

have you guys ever considered doing an "effects" release? looking at the blood/magic effects on these figs hands and some of the stuff you have previously done makes me wish you would do a set of like, magical effects or what have you that i could print in resin and then add on to an existing miniature to give it a lil razzle dazzle.

Antonio C

Sync Link isn't working for me - it says: "This link has been deleted by the owner."

Christopher Brackett

This set is so beautiful, thank you Francesca and Andrea for creating such an amazing set!

Steve Howland

Adding onto that idea, I'd love if we got some more castery options for some of the factions.

Brian John Gabriel

I can only speak for myself, but if this whole year was releases that just expand pre-existing sets, I would absolutely love that!! Give an opportunity for factions with no mounted units (or no big centerpiece) a chance to get them that still fit stylistically with the other sculpts, also a good way to convince newer patrons to pick up older sets.

Orange Cream

I believe someone mentioned in discord that the right hand for the heroes wasn't the correct one. Just wondering if that was sorted as well in th recent change log? Awesome sculpts as always!

James Harrison

Never been this excited to print an owl

pervyturtle

haha I guess she have a personall assistent, and the wings are probably pierced :P

Artisan Guild

I don't normally make musicians (unless is a bard hero or so), but you can use the Soulless Vampires banner for them :)

Artisan Guild

Hi!! I would like to suggest some future month release: some kind of knights of the holy grial (AG version of Bretonnian knights) and another goblin release (never can have enough goblins, but more fantasy type, like night goblins, not like sparksoot). Thanks and congrats for your work!!

Bernat Rovira Lastra

That´s in the first line of the post: Important Notes: Presupported Terrain will come in few days! Thanks for the patience

Benjamin Engl

Love the new models! One thing I just noticed.. If you only download the Pre-Supported folder you miss out on the Terrain pieces. I would like to suggest adding those to the Pre-Supported folder also....

Stephen Landis

Akela the Cursed I hope comes NSFW top and bottom. Would make a great model for my desk!

Matthew

I love all of your sculpts but i wish you would include a banner/musican option in the modular packs

Chops

In general, I like the clothed pinups, but I do wonder how Akela puts on her Bra and panties :)

demonwombatofdoom

First bat is in the tank. Fingers crossed.

CURTIS CRADDOCK

I love seeing this set, would be nice to see similar kind of 'expansions' of previous sets!

Chris Reitzel

This is an awesome set! Also the new renders look great, while I prefer no colour in the renders, I have to admit just the touch of red still looks really good. Happy new year! Thank you for all your hard work!

Mini Manatee


Related Creators