The Blackrazor Hobgoblins - August 2021
Added 2021-08-02 01:02:19 +0000 UTCThis Set is from a previous month, but you can still Buy the STL in our Shop.
- We release Patron's Only DISCOUNT CODES each month, they are active from day 1 to 10 each month! Check our last release.
Hail Adventurers and Merchants!
Welcome to a new exciting months in the guild!
We can't express how much we are excited to finally share with you our last creation, we truly loved to create this new faction, the evil and crazy Blackrazor Hobgoblin tribe!
We are sure you'll find useful this set of monsters, they will perfectly suit any old-school orc or hobgoblin, as goblin with some minimum resizing.
All the Hobgoblin troops comes with and without helmets, and as always all warriors comes with balljoint sockets in the wrists to be combined with many weapons, from blades, to arbalests.
As always the standalone weapons (with no hands) are provided for any kind of kitbashing and rotation both pre & post print.
LINKS are located just below the next picture ^^
BLACKRAZOR HOBGOBLINS LORE
Blackrazor Hobgoblins
The Hobgoblins, stronger and taller cousins of the Goblins and worshiper of the Goblin god Grimbog, are among the most ancient and cruel races that lives in the Falgor Swamp, a wild and inhospitable land on the edge of the Deeproots forest.
For centuries, the Blackrazor tribe stuggled to survive against the continuous attacks by the Gurunda and other Hobgoblins tribes, until the shaman Bogtraz Murkytongue discovered a way to model the only mineral found in the swamps, the Blackiron.
No longer they fought with bone clubs, but began to forge blackiron blades, shields, armors, and the fearsome arbalests.
In a short time, the Blackrazor became a relentless army, their number grew out of proportions, as their hunger for power and conquest. The surrounding tribes had to surrender to the strength of the Blackrazor, who became the only Hobgoblins tribe in Falgor Swamp absorbing trough violence the weaker ones.
This new force of despair and destruction, guided by the Hobgoblin Queen's thirst for power, is now looking to extend their kingdom over the civilized cities and towns in Rotvar.
Razorbeast Riders
The Razorbeast Riders, trainers of this fierece race of wild boars, have the task of sifting far and wide to find villages or peoples to raid and subdue. Razorbeasts may not be as fast as horses, but in the Falgor Swamp they are unrivaled in terms of mobility.
Bogtraz Murkytongue
After facing a mystical journey under the guidance of the Queen in the depths of Falgor Swamp, he returned to his brothers with the mystic formula to shape and forge the Blackiron, a gift from the god Grimbog himself.
This gift changed the tribe forever, and earned him the title of High Shaman, and become the advisor of the Hobgoblin Queen Trixia.
Thanks to the new blackiron equipment, the tribe expanded more and more, and declared war to all the surrounding factions and races who always menaced the existence of the Blackrazors.
Uzgrot Razorcloak
Champion of the Hobgoblins troops.
As per tradition every year, in the month of the icy mist, the best warriors of the tribe compete in a bloody arena in which the only one survivor is elected as Hobgoblin Champion, a warrior who has the honor of leading the troops during the raids and being the Queen's personal guard.
Uzgrot has been the undisputed champion for 12 years in a row, and now has more than 400 underlings.
Blackrazor Rock Troll
This Troll Lord was found by the shaman Bogtraz on the verge of death, surrounded by a massive dead army of Arverian and few survivors.
After the Shaman struck the death blow to the Arverian Hero who wounded the Troll, he used the shaping spell provided by his god to enhanced the Troll regeneration and fused his thick skin with pure Blackiron. The Troll lord, pleased by his new power, became a faithful follower of the Bogtraz and his tribe. From that day on, he has obeyed his masters, devastating and wreaking havoc wherever he is ordered to.
Trixia the Hobgoblins Queen
In the Hobgoblins tribes, only few women are able to conceive. These women, worshiped as deities, are raised as wisewomen and often become the queens of their tribe.
Thanks to their wisdom the Hobgoblins have endured and grown throughout history.
The evil Trixia of the Blackrazors grew up under the guidance of Bogtraz, and she was convinced in her childhood to be the true daughter of the Goblin God Grimbog.
Thanks to her dedication in the shamanic ways she learnt to speak with the Goblin God and received the location of the sacred spell used by Bogtraz to shape the Blackiron.
During the Great War of Falgor she ordered to kill all the other Hobgoblin Queens, and every other Hobgoblin woman as she discovered their fertility, going against all traditions.
Blackrazor Chariot
Once used simply to transport Blackiron ores, these carts had been reinforced and attached to trained Razorbeast, transformed into battle Chariots to overwhelm the enemies of the tribes.
They are large enough to transport two Hobgoblin troops, one to lead the razorbeasts in battle and another to shot with a mighty arbalest.
The Blackrazor Weapons!
And here the complete lineup
WELCOME BOX AND GUILDS (game)!
A quick reminder:
Our Welcome Box is always available for our patrons! The Welcome Box will get supports as soon as possible, we are in the process of supporting every single legacy model.
On another hand, the Open Beta for our skirmish game GUILDS!
If you are interested, just take a look and download the latest PDFs here.
Guilds Beta is a bonus for our dear patrons, play it with your friends, but please don't sell/share the rules in the web.
We are working on a huge update that will includes many new factions and rules for mounts and Heroic Mounts!
GUILD MEMBERS DISCOUNT CODES
- ARTISANCOLLECTION -30% on all our previous releases 1 to 10 each month.
- WHOISTHEBOSS? -50% on every Epic Boss released so far!
Need Help? Join our Discord!
If you have any kind of trouble or feedback about Pre-Supported files, don't exitate to tag @Sephiroa, @Omn0mm and @Risc66 in the pre-supported channel in our Discord.
In any case, Lychee allows you to edit supports and export again as STL to slice in chitubox.
At the end of each month we send the full patrons list to MyMiniFactory.
If for any reason you are missing a set of minis you received here on Patreon by supporting us, you can send them an email on info@myminifactory.com, they will get back to you in few hours.
Thanks for supporting us and being so awesome dear Adventurers!
We are looking forward to see your prints and painted figures, we really hope these models will inspire you to play awesome rpg adventures and skirmish battles.
Cheers!
Comments
dont think its done yet they were still busy and they have a volcano problem or atleast they have bieng collecting money for it i can wait for dont want them to rush
2021-10-02 19:50:50 +0000 UTCSame situation for me. I can dl the welcome pack but i'm redirected here for octobre one ???
Sebastiano Zucca
2021-10-02 13:03:57 +0000 UTCHi i just subscribed for the gnoll set but i´ve been redirected to here ? have i now also payed for the september set or does it just take some time for the october set to go online ?
Elia Seubert
2021-10-01 16:08:31 +0000 UTCI must agree with this - the supports for some reason have gone from being "solid" in previous month issues to "flimsy at best" in this release. Andrea, for the amount of money you are raking in every month from patreon I think the least you can do is pay a professional to put decent supports in place!
Andrew Chenery
2021-09-12 23:49:35 +0000 UTCDoes anyone know what Letter the NO helmet hobgoblin top middle warrior is?
Matt
2021-08-29 21:07:09 +0000 UTCThe discount code doesnt seem to be working
Ryder Frankle
2021-08-28 14:18:24 +0000 UTCblob:https://imgur.com/2f2b13e8-89ae-4155-b134-a725cb255e9e
Bartosz Sadkowski
2021-08-27 08:07:52 +0000 UTCWhat is your settings to print that nice big guy? Did you use "pre supported" model or did you put supports by yourself? Did you changing scale or just rotate model and put it to print? What software do you using? Im trying to print using Chitubox
Bartosz Sadkowski
2021-08-26 16:39:40 +0000 UTCAnother attempt to print, and another fail at 80% >.< I really dont know what to do.
Bartosz Sadkowski
2021-08-26 16:38:05 +0000 UTCI was able to print with a basic photon. Maybe adjust your setting? Ive had a string of bad prints before and turned out the FEP was cracked. try toubleshooting.
Gabriel Dominguez
2021-08-26 15:41:31 +0000 UTCDudes... That big rocktroll body requires somethin like 10 hours to print! And every attempt of printing ends with failure. I tried couple of variations angles and supports, everytime there is the same problem - printing ends at 80% . Please if you making some awesome big models i beg you to create stl with some separated parts! Its safer to print and even if printing fails you need only to reprint one part, not whole model ;/
Bartosz Sadkowski
2021-08-25 18:46:24 +0000 UTCMine printed with one of the arms failed and then I printed the base and it ripped off the supports. I haven't had problems since the 3d printing(not)pro used to do supports. Very sad I am suddenly having issues.
Miles Lewis
2021-08-17 22:23:58 +0000 UTCYes! Its on discord and facebook communities :) its much simplier to see entries there
Artisan Guild
2021-08-12 09:36:18 +0000 UTCGuys! This set amazing! Incredible work! These are some of my favorite greenskin sculpts ever. Keep it up! I wish you guys had a painting competition this month cause I can't wait to paint these guys.
Zociferousthedoge
2021-08-12 04:44:58 +0000 UTCthe ones in the archives are the highest resolution render :)
Artisan Guild
2021-08-11 19:33:05 +0000 UTCGreat, thanks for the confirmation! I've already bought two more sets through the sale. I'm sure I'll get more eventually.
Kyle Bentley
2021-08-11 02:36:56 +0000 UTCI'd love the same.
Scott Spalding
2021-08-10 22:37:57 +0000 UTCWelcome, Kyle! Yes, you'll have in your MMF library all the files from Patreon.
Artisan Guild
2021-08-10 18:07:22 +0000 UTCAnywhere to get high res versions of the full release lineup pictures? Both past and present.
MalkavianLogic
2021-08-09 21:23:49 +0000 UTCWhat is the -CONFLICT zip file, on Sync? Kinda confused what needs to be downloaded. Also - is there ANY chance you could make full-sized images available, in the release folders or otherwise? The images are very useful for knowing what I want to print without having to load up every STL file, and it's kind of a pain to have to extract them from Patreon. Thanks!
Steven Crawford
2021-08-08 22:09:02 +0000 UTCHi Guys. It's already been done after I left a message on Discord. It's in the 'Hobgoblin B' folder. AG were super quick.
Adrian
2021-08-08 17:48:11 +0000 UTCI second this
Scott Doedens
2021-08-08 16:33:28 +0000 UTCYes, this would be helpful. Hopefully, it gets updated?
Joey Couch
2021-08-08 15:45:51 +0000 UTCI got my printer last Wednesday and I'm almost done with the set already. My kid and girlfriend are really excited to play when it's all done.
Kaiかい
2021-08-08 09:57:03 +0000 UTCI love the models as always, but the pre-supports are once again a total disappointment. Printing on an Elegoo Saturn with standard gray elegoo water washable resin, I managed to get 2 goblins, a handful of weapons, and 4 bases out of this set. The other six minis failed either instantly or pancaked at least one limb. https://i.imgur.com/qBNvUg3.png It's so very disappointing because the minis themselves are really nice. I don't have time to spend hours re-supporting them or making the supports stronger in Lychee. Would it be possible to do a "heavy duty supports" version, with stronger supports at the lowest points?
PoptartsNinja
2021-08-07 20:54:13 +0000 UTCTThanks for the feedback ! Did some tests and tried again. Turns out I messed up while refilling resin too enthusistically. Just finished it (started with a full full vat :p ) and it is flawless :)
Léo Szewczyk
2021-08-07 15:33:57 +0000 UTCI'd say that's a suction issue, its quite a large model. If you haven't hollowed it, I'd advise doing so and adding a couple vent holes
Benjamin Burgham
2021-08-07 12:56:48 +0000 UTCMy 3D printer hasn't even arrived yet and these hobgoblins looked so good I had to subscribe anyways. Looking forward to seeing what else you guys produce.
Mark Linton
2021-08-07 02:49:40 +0000 UTCAmazing models as always ! Anyone got issues with the troll though? Mine fell from the buildplate at 60% :( i don't know if it is a suction problem or something else. Everything that was printed was pristine, just the lower torso part stuck to the fep instead of teh buildplate and caught the whole model.
Léo Szewczyk
2021-08-06 19:34:31 +0000 UTCYeah I have been having a hard time with support removal this month as well. That throne is really hard and I keep losing hands and such. Both my AC Mono x and my Epax 4k mono print them great but them supports are not so great this time.
Francis Smith
2021-08-05 06:26:32 +0000 UTCI have had no such issues. I saw someone post on the Fb group that they had a few pre-supports fail where they usually have none however.
BigKittyPaints
2021-08-05 04:02:32 +0000 UTCReally great models as always. Easily the best $10 I spend each month. So far I've printed Razorcloak and all the modulars and found the supports much more difficult to remove than I've come to expect. Did the settings change significantly since the last release?
Timothy Jones
2021-08-05 02:44:57 +0000 UTCNew patreon here, excited to print up some shrunk hobgoblins to add to my goblin collection. One question, will we be getting the files from the months we subscribe for added to our MyMiniFactory accounts?
Kyle Bentley
2021-08-04 19:56:06 +0000 UTCUnderstand where you're coming from. I prefer to wait for the MMF reference pics myself. I find the are cleaner.
James Harrison
2021-08-04 02:44:29 +0000 UTCI'm thinking of painting them based on the actual Hobgoblin from Marvel, for lack of any original colour scheme :D
James Harrison
2021-08-04 02:43:12 +0000 UTCIf I am not mistaken, they are doing a Cthulu-type monster for the next seasonal reward.
Shamrock1916
2021-08-04 01:40:42 +0000 UTCThis would be my 3rd month in a row that I’ve had the pleasure of subscribing to you guys. Any news if any of what the possible legendary monster you guys are going to be giving out this month for this season if any? I’ll be catching up on printing the rest of your models until then. Thanks.
Jared Trexler
2021-08-03 20:06:36 +0000 UTCHi, Elizabeth! Yes, it is included :)
Artisan Guild
2021-08-03 11:13:56 +0000 UTCAgreed, I use the reference images to help make things easier, would love for them to be included!
Hannah Galloway
2021-08-03 05:04:41 +0000 UTCSuch an amazing set, I am gonna get all of them printed for my horde army!! grazie Andrea you rock!
Arsenio Gárate Jauffred
2021-08-03 01:50:02 +0000 UTCArtisan Guild, I only started supporting you a couple of months ago. But I was wondering about a previous month’s release. If I purchase the Swamp Gurunda set from MyMiniFsctory, will it include the Fighters Guild Riders that were included as a bonus? If not, is there any way to get them? I’m using one of them that I purchased from Etsy as my mini in D&D and would like to print her as big as possible now that I have a 3D printer.
Elizabeth Horner
2021-08-02 18:20:03 +0000 UTCWonderful work, these models look fantastic, as ever. But, if I can be so bold as to make a request, could we have the whip as a modular weapon, rather than the standalone weapon? I'm afraid kitbashing the pre-supported whip and fist is a bit beyond my skill, and I so want to have the chariot driver to have a whip.
Adrian
2021-08-02 17:29:52 +0000 UTCHi, Erik! Yes, we are working on adding supports to the Amazons :)
Artisan Guild
2021-08-02 15:17:37 +0000 UTCNailed. It. Mic. Drop. Beautiful work!
Alex A
2021-08-02 14:59:12 +0000 UTCAgree with above. I use those images for reference.
Peter Santucci
2021-08-02 14:57:41 +0000 UTCSame, I love having pictures in each folder because I can quickly scroll while looking.
Matt
2021-08-02 13:55:39 +0000 UTCThere's no promo or reference images in the folders this time. I went to just download them from this post instead but theyre super low res compared to normal.
Sean McInnes
2021-08-02 10:41:48 +0000 UTCI don't want to complain, but can we go back to slightly more functional pin-up characters? The zombie lady from the Oldburg Fallen Ones looked fantastic and could easily be inserted into any D&D game for example. The same goes for the ones from Requiem Brotherhood and Arverian Woodkeepers. Linking them to an anvil, a door or a chair makes them much harder to use though. Also, are the supported models for the Amazons Kickstarter still coming?
Erik
2021-08-02 09:09:50 +0000 UTCFinally some hobgoblins I can use! Love these, especially the shaman. Cheers :)
Rob Leonard
2021-08-02 07:45:36 +0000 UTCwat colour do we paint this pack
dawzy27
2021-08-02 05:53:19 +0000 UTCEspecially excited about Bogtraz! Such a cool mini!
Brandon Ryan
2021-08-02 04:37:43 +0000 UTCYeah, I know it's generally been around the 10th of the month usually, not fast, but I'm not printing them straight away atm.
Chris Rosedale
2021-08-02 03:17:39 +0000 UTCThey do get added to MMF, but it doesn’t seem to happen very fast. I have June’s release, but not July, so far.
B. Griffith
2021-08-02 02:49:49 +0000 UTCespecially loving the leaner feral looking boars. great realase
Ryan Pipkin
2021-08-02 02:04:01 +0000 UTCNo, they stated it’s free game for patreons and they don’t need to do a Kickstarter to fund it. It’s a generous bonus to us
ResinandFilament
2021-08-02 01:47:34 +0000 UTCOk I have to know more about this game. Are you going to Kickstarter with it ?
Jared Rutledge
2021-08-02 01:23:18 +0000 UTCJust want to confirm, we don't have to download the releases if we're part of MMF, as they add them to the library each month?
Chris Rosedale
2021-08-02 01:16:02 +0000 UTCAnother fantastic month! I've got so many minis I've dropped all my other patreons but I can't help but keep adding AG to the backlog each month.
Bill Curran
2021-08-02 01:14:55 +0000 UTCthank you so much for your enthusiasm! :)
Artisan Guild
2021-08-02 01:12:33 +0000 UTCI know i've commented this on every post about these guys, but I love this release so much! My work shift just started, but guarantee when I get home my printer will be pumping nonstop until this whole release is done :)
BigKittyPaints
2021-08-02 01:05:23 +0000 UTC
