Coming in August... the Blackrazor Hobgoblins!
Added 2021-07-22 18:29:32 +0000 UTCHello guys!
Quick update to finally show you our latest effort, the Blackrazor Hobgoblins!
You are invited to click play on the video above :)
As we stated before, we always wanted to make taller goblins, inspired by the old school orcs and goblins like the ones in the Lord of the Rings and Lodoss War.
To distinguish them from the the Sparksoot Goblins and the Greatgoblin, we will call this race Hobgoblin.
Some more lore will be part of the next post. We really hope you'll like this release. It was truly a challenge to finish the Blackrazor Rock Troll and the Chariot in time, but we really thing it was worth it.
Thanks for your support guys! Have a wonderful week!
Comments
is there a way to buy the hobgoblins as a set? there is no set for purchase on MMF.
ARCTIC LAB SERVICES
2021-11-22 15:11:05 +0000 UTCYou should consider to cut that rock troll into smaller pieces like torso / legs etc because its a bit too big to print. Also that "pre-supported" models was tested to print?
Bartosz Sadkowski
2021-08-24 21:09:04 +0000 UTCThirded!
Kyle Bentley
2021-08-05 15:01:58 +0000 UTCNice cant wait
dawzy27
2021-08-01 10:50:56 +0000 UTCI agree with the lack of voting 200%! Sites that listen to subscriber votes always end up doing the MOST boring choices. Originality ftw!
B. Griffith
2021-07-31 23:03:34 +0000 UTCHi Ethan, every slicer I know of has a scaling function, so that much is easy. If you scale the minis down too far though, the supports and parts of the mini get too thin and weak. I use 28mm in my games, so reduce the scale to 87.5%, and have never had a problem. I'd be guessing if I told you reducing the size further would work.
Adrian
2021-07-31 22:49:45 +0000 UTCThese are awesome and look forward every month for your releases. I was wondering why is only the pinup to represent females this month?
Bonnie Sullivan
2021-07-31 16:33:47 +0000 UTCI don't really have much need for hobgoblins in my miniatures, but these guys look like they could work for regular goblins if they can be reduced in size. I'm new to 3D printing. How hard would that be to accomplish?
Mercurius
2021-07-30 11:48:28 +0000 UTCLooking forward to this. I'm curious where you got your music for the video/what is it? Sounds Australian to me, but I'm not well traveled.
Andrew Stambaugh
2021-07-30 03:41:41 +0000 UTCI keep watching this video.. can't wait for the new models!!
Daniel Williams
2021-07-30 00:51:34 +0000 UTCThese look amazing. I watch for your releases every month. I wish one of your merchants slots would open lol.
AVS 3D Printing - Laser Cutting - Engraving
2021-07-29 17:53:00 +0000 UTCThese are really great.
Jeremey Matviychuk
2021-07-28 19:27:22 +0000 UTCtoo bad there is no 2 handed weapons.....
Dams Paquito
2021-07-27 12:11:13 +0000 UTCFeral Goblins in the stlye of those hobgoblins would be really nice. But whatever you do just make what you feel like - vote free releases is the best decision ever!
Kevin Pacheco
2021-07-27 11:51:45 +0000 UTCOne of the things I've found incredibly lacking in Patreon minis as a whole is the fantasy mainstay type monsters - stuff like regular old goblins and orcs and kobolds and such - so definitely second this
Richard Conley
2021-07-25 17:03:16 +0000 UTCVery Cool
Starlys
2021-07-24 22:15:52 +0000 UTCThese are really cool! A second vote for feral goblins … they are tough and I need a bunch of poses :-). Can the dwarf-riders fit on the boars?
Cristian Cooney
2021-07-24 03:53:16 +0000 UTCOh do you know Lodoss? Why not do a special month on it, or next to it, I will dream of having a Deedlit or Pirotess to print
Willems Eric
2021-07-24 03:13:53 +0000 UTCSeconded! Those boars are awesome! I would love to just throw some of those at my players all by themselves! The whole set is awesome though, as usual.
Samuel Stubbs
2021-07-24 02:14:33 +0000 UTCPut her on the troll and let her go to town!!
B. Griffith
2021-07-24 01:21:27 +0000 UTCSo the queen can ride the troll and chariot?? Awesome!
B. Griffith
2021-07-24 01:14:22 +0000 UTCGreat set as usual! Any chance of Mushroom folk in the future?
Hizeru
2021-07-23 21:35:06 +0000 UTCI can understand that but I still hope you guys make more pinups like Nihae, Aidreth Treeborn, & Solaria. They are among my favorite pinups due to their usability. Trixia would've made for an incredible shaman piece if not for the fact she was made for dioramas.
Dendail
2021-07-23 17:41:23 +0000 UTCPleeeeeeease, can we get boars without saddles? They’re all awesome! Can’t wait for print them all!
Federico Franconieri
2021-07-23 15:35:49 +0000 UTCLove these Hob Goblins and I'll definitely be printing out a ton of these. Any chance you might ever make a second set of Regular goblins thats less like the engineer sparksoot and more feral and wild like these hobgoblins?
Adam Beck
2021-07-23 15:23:49 +0000 UTCThe girl band equivalent to the current Rock n' Troll boys ;) you could make it an epic boss release so you have more time to pose the armed and unarmed versions.
James Harrison
2021-07-23 14:26:41 +0000 UTCIt's not the intention really, but thanks for the compliment ! :)
Artisan Guild
2021-07-23 12:04:21 +0000 UTCSadly it's not supportless :) And the throne is separated (you have 2, one is a bit less wide to fit in the chariot and the troll platform)
Artisan Guild
2021-07-23 12:03:56 +0000 UTCThanks for your comment! The fact is that most of the models are sculpted directly in pose, there's not an existing version of a standing or symetrical Trixia, and the Pinup is often used more as diorama / collection piece, to have some variety and to be distinguished from heroes.
Artisan Guild
2021-07-23 12:03:21 +0000 UTCSorry, Uzgrot is coming only without helmet
Artisan Guild
2021-07-23 12:02:10 +0000 UTCThanks... same for us! haha
Artisan Guild
2021-07-23 12:01:53 +0000 UTCThanks! It was a challenge to make her look. The idea was to make her recognizable as a hobgoblin, but still she uses the Pinup slot and needs to be appealing, not "realistic" :)
Artisan Guild
2021-07-23 12:01:39 +0000 UTChaha yeah! I already feel older :O
Artisan Guild
2021-07-23 12:00:41 +0000 UTChaha yes. We wanted to have some more pose varieties for the classic goblin/orc monster this time, it really depend on the month :)
Artisan Guild
2021-07-23 12:00:24 +0000 UTCAwesome release!
Philippe Thon
2021-07-23 10:01:41 +0000 UTCThis is amazing! Well done.
MS
2021-07-23 09:07:47 +0000 UTCI am so gonna print them all
Arsenio Gárate Jauffred
2021-07-23 06:41:53 +0000 UTCYes please.
Iron_flag
2021-07-23 05:53:36 +0000 UTCreally nice set, i like the cart
Clement Dufour
2021-07-23 03:11:35 +0000 UTCAlso btw congrats on taking second from what I see with 3D printing on Graphtreon and almost knocking Titanforge off the perch. XD
WarjackedsWorkshop
2021-07-23 01:46:45 +0000 UTCThat queen if she was attached to the throne almost looks like she'd print supportless. 0.o Mind blowing detail as always you all.
WarjackedsWorkshop
2021-07-23 01:37:15 +0000 UTCbadass!
Casey Schmidt
2021-07-23 01:34:28 +0000 UTCI know you guys are calling this hobgoblins but it’s almost a perfect fit for proxies of One Page Rules Orcs.
Nicholas McCurdy
2021-07-23 00:38:28 +0000 UTCTHis is amazing stuff.
DungeonMaster Martin
2021-07-23 00:33:29 +0000 UTCYou guys are my favorite creators when it comes to 3D Printing but I do have a concern. It is the way you guys do your pinups. I love Trixia, I think she looks amazing, but I don't love how she is sitting down. I use your minis in my games and I would have so much more use out of her if she was standing. I had the same issue with Flamma the Oracle and the fact that she is laying down. I understand the theme you guys are going for and I don't think it is a bad idea but I wish there were alternative poses with them standing so that they are easier to throw into our games.
Dendail
2021-07-22 23:58:15 +0000 UTCAll I print is AG Figs!! So much great stuff!!
Daniel Williams
2021-07-22 23:52:28 +0000 UTCwow...so nice
Ken
2021-07-22 23:00:53 +0000 UTCThis is awesome, will pair nicely with the new AOS Dominion box set!
Chance Meeks
2021-07-22 22:43:41 +0000 UTCI wouldn’t necessarily say great but definitely prolific is MZ4250 has all of dnd on his Patreon for like 5$ for fully supported. Also, I think it would be hard to pull a crowd for that considering most dnd monsters in a game aren’t going to be used ore than a few times in a game.
Nicholas McCurdy
2021-07-22 22:39:56 +0000 UTCIs there going to be a helmet version of the Uzgrot model?
Tom Fossell
2021-07-22 22:36:18 +0000 UTCAwesome! Loved the boars too :)
Fábio Burkard
2021-07-22 22:24:53 +0000 UTCI was unsure about this set based on the first sketches but I shouldn’t have doubted because this release is amazing! I really like it!
Josh Blomquist
2021-07-22 22:13:16 +0000 UTCAmazing!!!! Love the faces and the shamen and the queen.
LP Wilson
2021-07-22 21:59:42 +0000 UTCI like the way the only female is the queen. Seems appropriate. I love how you usually do both genders, though, it’s great! (Except for Dwarves. I don’t believe in the existence of female dwarves. 😉)
B. Griffith
2021-07-22 21:28:06 +0000 UTCYou have got to be kidding, Arman! I can throw a rock and hit ten Patreons doing classic D&D monsters, constantly! And yet on every Patreon that does unique stuff, people are always asking for D&D monsters. I wonder how many beholders there are on MMF at this point. 😅
B. Griffith
2021-07-22 21:25:16 +0000 UTCI think it’s cool and also funny that you guys do pinups for EVERY release. Lizardmen this month? Lizard pinup! Silly, and somehow less sexist because you do it no matter what. But I have to say, I really love the queen’s profile. It’s a surprisingly attractive face.
B. Griffith
2021-07-22 21:17:09 +0000 UTCWow, it's that time already? Where did the month go?
Shamrock1916
2021-07-22 21:04:51 +0000 UTCSo good!
Jeff Kunst
2021-07-22 20:22:52 +0000 UTCLove it
DeMon
2021-07-22 20:16:27 +0000 UTCI think the queen's appearance refutes that ;) ... Seriously though, no real complaint here, I just happen to love how you typically mix in both genders for each release. Every release from your Patreon has been awesome.
Grey
2021-07-22 20:15:19 +0000 UTCperhaps female and male hobgoblins looks the same :P
Artisan Guild
2021-07-22 20:06:20 +0000 UTCI love them, even more than the last few months. Said it before but I have Sparksoot and Greatgoblins painted and ready for these guys! Any chance of the other side of Beetroot war soon? Gnomes and halfling..
BigKittyPaints
2021-07-22 20:01:12 +0000 UTCPerfect set. Almost everything is useful from army building perspective, nice variance, melee and ranged, cool heroes, magic covered, extremely nicely done rock troll. Banners are always yay! and that chariot looks simply phenomenal! Thanks AG, loving every bit of it!
Easy
2021-07-22 19:59:37 +0000 UTCTotally understandable, I appreciate your response. Thanks for all the awesome models! 😀
Jess Boudrie
2021-07-22 19:58:17 +0000 UTCAs always, love the sculpts! Would love to see some female line troops/cavalry... Lady Hobs kick ass too! :D
Grey
2021-07-22 19:58:14 +0000 UTCThat is true! I keep forgetting about flipping.
Jim Chadwick
2021-07-22 19:57:04 +0000 UTCTime to dust off the green paint i suppose!
Matthew Strube
2021-07-22 19:56:27 +0000 UTCI had to little inspiration left for the terrain, so when it happens we make a sort of siege weapon or chariot haha. If the time is enough of course!
Artisan Guild
2021-07-22 19:54:29 +0000 UTCWell we are not really into D&D but we could make some researches. Without copyright infrangment haha.
Artisan Guild
2021-07-22 19:53:49 +0000 UTCat the moment we have so many variants and models that it's not a plan, also I'm using the armor plates and saddles to cover areas of the body which are not even sculpted, the time of the month is really limited.
Artisan Guild
2021-07-22 19:53:21 +0000 UTCThat means I'll sculpt 3-4 trolls, no more hahahah
Artisan Guild
2021-07-22 19:52:18 +0000 UTCThere are two poses who perfectly fit the crossbow, and bot poses comes with and without helmet, for a total of 4. You could also flip them horizontally to have 8 ;) Or using the Standalone crossbow to make some kitbashing!
Artisan Guild
2021-07-22 19:51:55 +0000 UTCI'll have to go back to see which ones have bows. I don't have all of them, unfortunately.
Jim Chadwick
2021-07-22 19:51:48 +0000 UTCthank you Land3d!
Artisan Guild
2021-07-22 19:51:08 +0000 UTCFantastic Release!!!! I love your art. Not only did you manage to get a Troll mount. You made the Chariot too! Amazing work.
Azuset
2021-07-22 19:50:10 +0000 UTCI would really love to see a monthly release of various DnD monsters. There aren’t really any great sculptors doing a variety of monsters as a monthly release.
Arman
2021-07-22 19:47:02 +0000 UTCSo sick! I can't wait to ambush my players with these guys.
Johnathan Henninger
2021-07-22 19:42:28 +0000 UTCI've had several times where the mounts would be exactly what I needed ... If only ... 😉
Jess Boudrie
2021-07-22 19:33:52 +0000 UTCYes! Please release the boars (and any future mounted animals; horses, wolves, etc.) without saddles! :)
Niels Beier
2021-07-22 19:31:08 +0000 UTCThey are absolutely awesome! Now we just need some Gnolls and "basic" dnd monsters are complete :D
Kristjan Pucko
2021-07-22 19:13:07 +0000 UTCHas this every been asked? Can we get the mounts without saddles? Giant boars would be great as would the stags and giant lizards from previous months. Either way, this month looks great!
Jess Boudrie
2021-07-22 19:12:41 +0000 UTCLooks awesome!
Dan Beake
2021-07-22 19:12:40 +0000 UTCGuess I'll be learning new skills!
Jim Chadwick
2021-07-22 19:07:23 +0000 UTCThere is a crossbow included in the weapons pack that you can modify with hands to suit any pose you like. Meshmixer or other programs are useful for digital kitbashing!
Flemming Ivers
2021-07-22 19:06:52 +0000 UTCAwesome! Can't wait!
Daniel Velds
2021-07-22 19:05:15 +0000 UTCThis set brings me hope for an eventual all troll release :D
James Harrison
2021-07-22 19:04:36 +0000 UTCThese look fantastic! I am crazy excited about these. One question, is there only going to be one pose for the Crossbow guys? I'm hoping there might be some variety if I wanted to make a bunch of them.
Jim Chadwick
2021-07-22 18:54:25 +0000 UTCAmazing models ! Cant wait to paint and showcase them on youtube !
Land3d
2021-07-22 18:52:18 +0000 UTCThank you so much!
Artisan Guild
2021-07-22 18:43:09 +0000 UTCThanks so much!
Artisan Guild
2021-07-22 18:42:59 +0000 UTCYes! Smaller heads but they will work fine as goblins :)
Artisan Guild
2021-07-22 18:42:50 +0000 UTCyeah! :)
Artisan Guild
2021-07-22 18:42:37 +0000 UTCSi great to see this set coming. Will make perfect orruks for my kruleboyz waaagh
Dams Paquito
2021-07-22 18:39:40 +0000 UTChermoso trabajo. cada dia mas feliz de quedarme ayudando. ya espero esas figuritas para imprimirlas
Nicolas Astete
2021-07-22 18:38:34 +0000 UTCThese guys are sick!
Draken_art_minis
2021-07-22 18:36:04 +0000 UTCOhhh nice !!!! The rest of Dzwingo's family :P
Plus Three Anvil
2021-07-22 18:35:59 +0000 UTCEpic release as always! :D
Joey D
2021-07-22 18:35:26 +0000 UTCThese look absolutely incredible! Probably the first set I will try to print and paint in its entirety.
Brian Terrel Jones
2021-07-22 18:34:18 +0000 UTCThese look awesome, and hey if we want to we can always scale em down to have more friends for the Sootsparks!
Lynds Jones
2021-07-22 18:33:35 +0000 UTCThey look awesome!
Sikharin K.
2021-07-22 18:33:19 +0000 UTCYoooo. I'm a patron to a few different mini creators. Yalls are always the releases I most look forward to. These look sick!!
Shane Radick
2021-07-22 18:31:45 +0000 UTCLet's gooo 😤😤😤😤
Christian Martinez
2021-07-22 18:30:45 +0000 UTC
