NokiMo
ArtisanGuild
ArtisanGuild

patreon


Vulkarion, Fire Jotunn King - Season 2 Epic Boss (2021)

Update: Thanks for your feedback on this Epic Boss guys! We had an issue probably in the upload phase, causing some archives to be corrupted. As we re-uploaded everything during the weekend, we also took the time to re-check every file. This Jotunn various version (to fit different printers sizes) has been printed multiple time and had no issues on its final version in our hand, but if you have any kind of problem please don't exitate to tag @Sephiroa, @Omn0mm and @Risc66 in the pre-supported channel in our Discord.
Thanks a lot :)
A little update, we are finalizing the last sculpts of the Thieves Guild, coming next month. Stay tuned for the trailer during the next days :)



Hello dear Adventurers and Merchants!

We are really sorry for the delay this month.
Vulkarion the Fire Jotunn King is finally available!
This character, an epic Herald of Tialevor, is the emperor of the Dumlok (the previous release) and sworn enemy of the Arverians (available now).
Get to know him better in the Lore at the bottom of the post :)

Vulkarion is the Epic Boss of the 2nd Season of 2021 (April+May+June 2021).
As for every Epic Boss, you will receive this for free if you supported us during the full season.
Check this post for more information about it and Epic Bosses in general.

HOW TO OBTAIN THE STL

EPIC BOSSES DISCOUNT CODE

WHOISTHEBOSS? - 50% on every Epic Boss released so far!
Please be careful not copying spaces.
Click Here to visit the MMF page for Vulkarion the Fire Jotunn King 

Vulkarion Lore

It is known that Fire Jotunns are born from the core of a dying, but not Vulkarion.
During a catastrophic battle between the Fire God Omuba and the Water God Holmuran, the index finger of Omuba's was cut.
The incandescent finger of the Fire God fell in the plains of Kamantra, planting itself in the depths of the earth and digging what is now known as the legendary Hell Maw, one of the great entrances into the kingdoms of the Depths.

The Finger of Omuba has been found and kept as a sacred relic from the Dumlok and continued to burn for 5 centuries. When the flame of the God was extinguished, Vulkarion, Son of Omuba, was born; king by birthright over all the Fire Jotunns.
The Dumlok swore eternal allegiance to Vulkarion, a gift of their God to impose their supremacy over all races of the Depths, and with him they conquered countless territories; until the Tyrant-God Tialevor convinced the Son of Omuba to help him to conquest the continent of Rotvar, in the surface.

In exchange for his help Vulkarion would become the overlord of the depths, one step above the hated Slathaai, who were now their allies.
Becoming one of Herald of the Tyrant, Vulkarion next task is to destroy the reborn Sacred Tree Yaldain, located in the Rotvarian forest of Deepsroots and protected by the furious Arverians. Being the Tree a simulacrum of the Goddess Arba itself, one of the three deities killed during the ascent of the Tyrant-God, Its divine core can infuse terrible power into Tialevor's thirsty hands.


Vulkarion, Fire Jotunn King - Season 2 Epic Boss (2021) Vulkarion, Fire Jotunn King - Season 2 Epic Boss (2021)

Comments

I've have had a similar experience.

Øystein Huse

I think I ended up emailing them 4 or 5 times before they got to me.

Don McLaughlin

Still waiting on mine. They have contacted me multiple times and it still has not been fixed.

Michael Trimboli

They finally got back to me. They made me send my patreon billing history, even though it was in the original email. But it finally got sorted out yesterday.

Don McLaughlin

I got a response from MMF. My email was not linked to my User Name apparently. Hopefully it gets fixed soon. You have been with them for a year with no problems, so I doubt that is the problem.

Michael Trimboli

Yeah, I had payment issues at the start of this month (Paypal refused to process Patreon entirely) and so I had to sort that out and by the time it was fixed I was able to resub - but no MMF links nor any access to this model....

Azazel

I have been waiting for this model, still waiting. MMF won't respond, and there is no other action available....

Don McLaughlin

Not looked at the files yet but I assume that's the hollow version if you wanna save some resin.

Frazer Jeffrey

In the supported files, there are "H" versions. What does this "H" mean?

Alex A

quick question: Do I need to scale his sword down to 95% for the scaled-down version or does it matter at all

Jose E. Rocha

Thanks for your feedback Arlan! Something went wrong either dueing the zipping or the sync uploading corrupting the files, but we are rechecking everything. We have still not reviewed all the files as we are also exporting the thieves guild for the next month, but we have a planned post update for the Jotunn on monday :) Really sorry for the issue with this boss

Artisan Guild

They did? I didn't see any comments from them

Wallywest317

FYI to anyone having this issue...AG responded pretty quickly and already had a new file uploaded by the time I checked this morning. FYI the file is about 1/3 smaller (844MB vs. 1.2GB) so perhaps some other fixes/adjustments were made.

Rob Leonard

Thanks for the tip...I didn't even think about trying 7zip or opening from the app instead of directly from the folder because 99% of the time the file is corrupt when this happens. As it turns out, AG responded pretty quickly and already had a new file uploaded by the time I checked this morning. FYI the file is about 1/3 smaller (844MB vs. 1.2GB) so perhaps some other fixes/adjustments were made.

Rob Leonard

AG this sculpt is amazing as usual. With that said this is not your best work and we all know you can do better. Between the file extension issues and the poor to really no explanation of the changes in your file naming convention this is frustrating. Add to that my first print from this release is showing some significant support related issues. I humbly ask you circle your production team up and remind them the high production standard you are known for and that you expect that to be back on track moving forward. Thanks in advance, a loyal subscriber.

arlan miller

Old guy feeling dumb here. Thanks Joshua. All this new fangled technology made me forget how to open a zip file. Looks great...super huge.

Mr. Screaming Death

Try opening it in your extractor not just opening it, it worked for me to extract it from within 7zip.

BigKittyPaints

I did the same, then tried opening the file with 7zip instead of just trying to auto-open and it worked.

BigKittyPaints

I am having issues as well. Can any of you who figured it out share how to extract the file...pretty please?

Mr. Screaming Death

I've tried dl'ing twice from MMF and it won't open...says the file is invalid. I've PM'd AG about the issue...just an FYI to anyone else having problems.

Rob Leonard

The thing that sucks most about the quality issues is that this is an awesome sculpt. The frost giant was amazing and had no issues. I get that they said the model was supposed to release around the 15th, but I would have rather waited an extra week or so to get something that was printable day one. Even more frustrating is the fact that Artisan Guild tends to not reply to any of the messages. I liked that they had pre-supported for anycubic photon this go round, but it doesn't mean much if they don't fit the build plate. As of right now, I can fit everything if I scale it down, but it's a giant and as such shouldn't have to be shrunk.

Wallywest317

If anyone has issues loading the files, I could load the supported ones into Lychee no issue, but the non supported ones would not open in 3d builder/meshmixer to repair the file - i imported them into lychee then saved them as an STL, after that I could open them in 3d builder to repair the files - obviously this is just a work around until the files are properly fixed.

Mini Manatee

They're hollowed - you need to add holes though.

Mini Manatee

Anyone explain the difference between the Supported and Supported H files?

Arman

Vulkarion_Legs (Supported H) there appears to be some random raft floating around in space :) the (Supported Photon-s) bdy file sliced fine after I added the missing supports.

James Harrison

Fantastic work, as always! I hope to see more jotunn in our future!

Eric Obara

As someone noted above, the incorrect file extension is not at the end of the file name. Actually I noticed there was no file extension :) Added the .RAR at the end and it decompressed just fine. Only issues I have had so far are on the body, there are three islands that UV Tools caught at layers 364, 410 and 541. Added supports in Lychee myself (using the free to use version) and reslicing as I type this.

James Harrison

I am having trouble loading the photon s files on my Photon Workshop to slice them as well.

Dustin Kane

I'm not sure if due to the billing issues I've not gotten this in MMF yet or if it's just a delay. I'll get in touch with MMF if it doesn't pop up in the next couple days.

Dynamic Prints Studio

This worked for me too, but can you actually use the files?

Tate Folds

I'm having an issue where every file is giving an error and will not load. Error Code: 0x80004005

Emmalee Stanwood

I haven't received the file in my MMF shared folder yet. No response from MMF about it yet.

Don McLaughlin

Open with 7zip instead of winrar.

Don McLaughlin

Sounds like this model wasn't QC'd well... size issues... file issues... Artisans Guild will you address?

Jason Davenport

You may need to use the unsupported files and angle/support them yourself...of course, that is if you haven't tried that already.

Emmalee Stanwood

Any chance we could get a presupported version that's able to fit the elegoo Mars? Every file of yours has do far but the sword and body are WAY too big

Jake Sveum

As Jake M suggested above. The file is not in ZIP compressed format. I renamed the .zip to .rar and used WinRAR to open.

Peter Santucci

I'm having problems too. The files do download, but Windows can not open the file. I used Super Zip, which I tought worked, but when I tried to open a file, got a 'you do not have permission' error.

Adrian

it doesn't work for me too

Stéphane Crozet

When I downloaded the zip file, Windows 10 popup said it was an invalid zip file. What can I do to fix the problem?

Jose E. Rocha

You shouldn't need to. The email will be sent to your patreon email address but clicking redeem will take you to MMF and redeem the model on whatever account you're logged in as. At least that's how it works for me.

Cait Sidhe

Nice! Thanks :)

Rob

this worked, apparently the file format is .tar not .zip

Jake M

mine open with 7 zip, windows gave me greif by default though.

SirPiken

ZIP is corrupted.

Peter Santucci

Same here. :(

Rob Leonard

Same I am not sure how to proceed...

Darth Badger

Mine were also damaged, looks like the source files are corrupt or something

harry callingham

For me the file from mmf was damaged. Anyone else or was it just me?

Chiral

los abro con prusa slicer, pero en cambio si uso chitubox me deja, que raro!

Aurora Méndez Mazano

vale, solo abre la base con soportes, todo lo demas da error

Aurora Méndez Mazano

y los soportados tambien, la base soportada si me abree

Aurora Méndez Mazano

los no soportados

Aurora Méndez Mazano

I wasn't aware there was one. I'm connected with discord on Patreon, but the server isn't in my lists.

Wallywest317

Hola, parecen que los archivos no estan bien, no me deja abrirlos en la cortadora

Aurora Méndez Mazano

Hi! How are you? I have differents emails for patreon and mmf. If i create a new account with this email will work?

Juan Bettaglio

I'm not

Wallywest317

Are you on the discord group? There are a bunch of super helpful people there that might be able to help you out.

Jason Davenport

Super stoked to start printing this this weekend after I change my fep

Pandaxsaurus

I'm going to need more resin....

Jason Davenport

Actually looks like only the legs and the base fit...

Wallywest317

Will all of these be printable with anycubic photon? My slicer program won't fit the sword...

Wallywest317

First epic boss from you, saw the email this morning Already sorting out getting the print started! Super excited to get this next to my dragon!

Benjamin Burgham

What an absolute badass. 😍

Travis Kopp

Another amazing sculpt! I’m totally glueing some tufts of fuzz under his armpits. There’s no way a giant like this shaves his armpit hair 😜

Tyler Merrill


Related Creators