Depth Ones Updated!
Added 2020-09-10 09:13:13 +0000 UTCGood day dear patrons!
As you might remember we are updating our older releases one by one in chronological order to bring them to our new standard: more modular figures, supports and so on.
50% Patrons Only DEPTH ONES CODE!
The COMPLETE Depth Ones Reavers Bundle is live on MMF now!
As we always do, we celebrate the update with a chunky Discount Code for new patrons, and giving the link for free through Patreon message to the former original patrons of August 2019 (when the original Depth One pack was released).
DARKSQUID - 50% OFF on the Depth Ones Bundle or its single figures. Till the end of the month. They also contains the unsupported files.
There are two new modular figures, and all sculpts had been updated and presupported. Except the Pinup Zixryam, the Tyrant Eye and the mounted version of the hero (due to the pose), every model is now Modular! For the first time Slathos can be equipped with any kind of weapon :)
The Hive Colossus, both used as Epic Beast or mount, apart from including Supports, has not changed. But it still worth to be mentioned ^^
The fully customizable Depth Ones pool comes in part and is ready to give nightmares to your fellow players :P
As always, the Depths Pinup comes in Alfar or Depth Ones (transformed) version.
Presupported models had been manually made one by one by Renato Tarabella using a plugin he is currently developing. It's much effective than chitubox and prusa at the moment. Please ignore the C4D files included in the presupported, you can simply print the supported STL.
Quick recap, how to get the Depth One Updated Set?
- If you where a Patron back on August 2019, we sent you a private message with the link and password.
- If you where a backer of AMAZONS! Kickstarter and bought the Depth Ones Addon, we sent you through Bakerkit the Link and Password (check your email)
- If you got the original 4+2 Depth Ones Set on MMF, its Shop item is now updated and you have the Complete Bundle updated in your libary. Single figures got updated with supports STL files too, so please check your library.
- If you haven't get these Depth Ones, as Patrons you have the 50% OFF code DARKSQUID till the end of September.
- If you where a Patron back on August 2019 but you didn't received the patreon private message, send us one. We can't keep track of delivered bundles on the comments.
We are also making a Public Code of 30% OFF to the public in few days.
Thanks for your support! We couldn't go back and update old sets for if it wasn't for your steady support. We really hope you'll like the next Set, including feline characters and a powerful Djinn ^^
Comments
Hello! Im patreon and want to buy this ... any disccount code avaible?
Estevo Machado
2020-11-03 17:13:27 +0000 UTCAny update on eye tyrant body? Had a failure today on it early in the print. Initial layers stick to the plate but none of the supports do.
M Payne
2020-10-11 16:15:27 +0000 UTCSo will we get this set if we bought it from the Kickstarter?
Esteban
2020-10-02 04:13:58 +0000 UTCHave the presupported files been updated? I purchased on 9/10 on MMF but had multiple failures, really excited to try these models.
Jeremy Whitney
2020-10-01 19:11:23 +0000 UTCPicked this set up, amazing!!!
darthweezy
2020-09-30 19:52:22 +0000 UTCq_q I purchased pieces of this a few months ago.
Gingerbeard
2020-09-29 21:12:24 +0000 UTCThat is a good question. I dont know. I am sure Renato (who is doing them now i think) is very capable. However, it seems a number of us are used to supports that are thin and light but still sturdy, and noticed the most recent supports are not.
Matt Horbund - Potent3D
2020-09-28 12:08:31 +0000 UTCIs Greg no longer creating the supports? Did I miss the announcement? :O
Easy
2020-09-28 08:36:18 +0000 UTCGood to know I'm not the only one to notice this. I'm not claiming to be anywhere close to a resin printing expert, but I've had quite a few failures with these supports, mostly around the arms.
Edward Lunde
2020-09-22 18:31:40 +0000 UTCThank you Benjamin.
Jason Applegate
2020-09-22 02:04:44 +0000 UTCThe weapon racks are in the welcome box here at patreon. They are the same as the ones in the buyable weapon racks packs on mmf. The weapons are included in the complete packs (i.e. depth ones)
Benjamin Engl
2020-09-21 19:31:35 +0000 UTCI'll add some things I noticed after picking up this set. 1. The supports ARE super heavy. The sheer amount of resin wasted on support material is pretty shocking. There's far more support material than I've seen on any other presupported sets, or, honestly, just having Chitubox do automatically. 2. Even with all the extra supports, I had a few of the modular guys fail - usually arms failing to print at the elbow. Every one of them, I reprinted after adding some supports for those locations, and they printed fine.
Joseph Schulte
2020-09-19 17:03:48 +0000 UTCI will try to take some pics. i have been working and not really at the printer. the touch points seem heavy and dont come off easily like they have in the past. I have 2 mars going almost 24/7 and ive printed 100s of models, from AG, Heros Inf, Cast N Play, Titan Forge and more ... usually with my settings, im able to pull supports off super clean and not need any post clean up. this time, the touch points are so big and thick and deep i have to clean all the models. I only printed the Beholder :)
Matt Horbund - Potent3D
2020-09-19 01:54:40 +0000 UTCHello, I just purchased the complete set on MMF. Are the weapon racks not included in the complete set? I can't find them.
Jason Applegate
2020-09-18 14:33:44 +0000 UTCHI Matt, one of my beta tester show here the supports removal procedure. https://youtu.be/u8U18iJulOQ
Renato Tarabella
2020-09-18 03:16:24 +0000 UTCAre you talking about all models of the Depth set? Can you tell me what i need to check? We are analyzing what you meant.
Renato Tarabella
2020-09-17 22:06:24 +0000 UTCI felt the parts that touch the model are thick and "heavy" rather than medium or light. removal was more difficult than normal. I had to do a bit more "post processing" work to clean it up. Im in 10 patreons since January, yours, HI, CastNPlay, Titan Forge and a few other that pre-support. Most are using "light supports" as much as possible to make them super easy to remove. These feel just thicker and heavier, especially where it touches the model. I see a few people like Philippe and RPGPrints had failures. i didnt. My resin settings are super dialed in and im grateful to not fail.
Matt Horbund - Potent3D
2020-09-17 00:59:50 +0000 UTCyes yes, we did :)
Philippe Thon
2020-09-16 19:08:26 +0000 UTCwe connected in discord this morning.. right?
Renato Tarabella
2020-09-16 18:58:23 +0000 UTCHi Renato, I can't send you a message on Discord, I would need your last 4 digits to add you as friend to send a message? Sorry if I missed something i'm not so familiar with the platform.
Philippe Thon
2020-09-16 07:01:12 +0000 UTCHI Edward, i just gave to 4 testers a new presupported version of Xantaras Eye with pupil. I'm waiting for the print result today. It's a new orientation where all fangs are without any support. If you want to partecipate with us to the print test write me on discord @Risc66 and i'll give you the model. You can just analize it and wait for the test result. In this new version I also increased the touch point for all supports.
Renato Tarabella
2020-09-16 06:36:56 +0000 UTCHello, I am also having issues with printing Xantaras so it's comforting to hear other people having issues (otherwise I probably wouldn't have spoken up since I'm new to resin printing and expected issues with large models in general). For what it's worth, haven't had issues with the new Kobold models! Would I be able to get a new version as well?
Edward Lunde
2020-09-16 03:08:20 +0000 UTCHi Matt, do you mean the support it's self or the last part where it touch the model? You mean also the chrosshatch too much dense?
Renato Tarabella
2020-09-16 00:54:37 +0000 UTCPhilippe & Jeremy, can you contact me on discord @Risc66 so i can give you, in the next hours a new version of Xantaras? Can you also send me on discord the photo that show how is failed? Thanks in advance for your patience.
Renato Tarabella
2020-09-15 22:08:05 +0000 UTCHi all. I'm checking the problems that you all notified and after the change (and the test from our tester) we'll release the fix soon as possible. I'm very sorry for that.
Renato Tarabella
2020-09-15 12:33:30 +0000 UTCSame trouble with Xantaras. Failed print on the main body (raft adhered to bed but support trees didn't). Glass half full, good to know that it isn't a new trend and that the monthly releases will still come out flawless Greg, thank you. Shame that the Depth Ones release won't have the same reliability - I purchased it separately specifically for the beholder model.
Jeremy Whitney
2020-09-13 23:05:10 +0000 UTCI do the monthly release but I am not doing the older ones
Greg Kourakos
2020-09-13 20:40:24 +0000 UTCi'm having the same issue with Xantaras, the MMF old sets are being supported differently. typically I have no issues too with the monthly releases.
3DPrintingAdventures
2020-09-13 20:25:04 +0000 UTCJust picked up the set. I have it on the printer now. The pre-supported files look like the supports are super heavy. No more light/super light supports?
Matt Horbund - Potent3D
2020-09-13 20:15:28 +0000 UTCI've had the same with Xantaras head, 3 prints on 3 printers all failed. Monthly releases work perfectly on my printers, pre-supported old releases have lots of failures.
DungeonTokens
2020-09-13 07:57:09 +0000 UTCHi there, I've had big issues with the newly added pre-supported files of this set. I've tried to print Xantaras but had 4 fails on the body alone. I have no issues with other sets (printed balzoordan last week at 80% scale and Diggaz 100% scale last week too without a single fail using pre-supported files). Seems to me that the base is too thin and is not sticking on the plate. Same issue with Xantaras and with the Hive colossus, which failed at 30% of the print. Other than that keep up with the amazing work you are doing!
Philippe Thon
2020-09-13 07:18:47 +0000 UTCThanks so much for updating the set on MMF! I was worried (but still 100% willing) to pay the $15 for the updated set after purchasing it in May. You guys rock!
I Like the Cut of Your Gibbering
2020-09-13 05:01:36 +0000 UTCBought the set on MMF and it's a .rar file. Is this intentional?
Karen Schroeder
2020-09-13 04:54:09 +0000 UTCDownloaded the set tried opening the file to unzip and it wont open with the 7zip program. It keeps failing anyone else had this issue?
Israel Martinez
2020-09-13 01:51:12 +0000 UTCMaybe you can be a Printer Tester of this set ;) If so, contact me on discord. Contact Risc66
Renato Tarabella
2020-09-12 23:22:22 +0000 UTCHi Richard, Joshua. The Standalone weapons must not be there. In the next release i'll take care about that. The reason is because you can use them every where so you'll support them with the character that will equip it..
Renato Tarabella
2020-09-12 19:05:30 +0000 UTCVampires! Those and the Goldmaw Lizards are high on my wishlist!
Glitterwolf
2020-09-12 15:50:48 +0000 UTCAwesome you guys are great!
Doug Poniarski
2020-09-12 12:19:02 +0000 UTCyes. these pre-supported set are free for who own the not supported ones.
Renato Tarabella
2020-09-12 12:10:58 +0000 UTCAwesome! If we bought the smaller sets from mmf will we receive an updated version of those downloads?
Doug Poniarski
2020-09-12 11:51:06 +0000 UTCThe Vampire set is near to be released. Probably at the end of this month will be released alongside the Fighters Guild
Renato Tarabella
2020-09-12 11:49:37 +0000 UTCWhen will you be doing the vampires set?
Doug Poniarski
2020-09-12 11:42:30 +0000 UTCcan you provide a screenshot example of these points too large? Would you partecipate to the test of outcoming release as 3 users I have in discord ? Probably you'll help to improve the quality of the future release.
Renato Tarabella
2020-09-12 11:27:40 +0000 UTCit's not chitubox so i can't edit it if i need too, and i need too, as many of the connection points are to large.
Michael Peterson
2020-09-12 10:53:07 +0000 UTCHi Michael, what is the problem with the supports?
Renato Tarabella
2020-09-12 10:44:38 +0000 UTCI do not like the new pre-supports.
Michael Peterson
2020-09-12 06:34:27 +0000 UTCI too am wondering this.
Joshua Hiebert
2020-09-11 22:39:15 +0000 UTCAwesome Just picked up the set!!
Bob Steele
2020-09-11 16:50:20 +0000 UTCHow come the standalone weapons are in the presupported folder but they aren't presupported?
Richard Wall
2020-09-11 16:19:37 +0000 UTCIf you switch to the merchant level is ok to sell prints on auction sites?
Magnus Andersson
2020-09-11 14:07:02 +0000 UTCI had that issue as well, I clicked "go back to Object" (or something along that line), and when I selected [Download] again, this time it worked. Give it a try.
DoctorDiscord
2020-09-11 07:57:46 +0000 UTCYEEEEEES!
DoctorDiscord
2020-09-11 07:56:32 +0000 UTCI purchased them and I cannot download. It says that the files are missing
Wedjat Ecou SRL (RO36777360)
2020-09-11 04:00:16 +0000 UTCWhere do the Lizardmen fall in the rotation?
Ron Staton
2020-09-10 23:50:37 +0000 UTCFor some reason the code is not working for me, I just get error, please try again.
Michael J Greeley
2020-09-10 18:49:12 +0000 UTCPrinting the Hive Colossus now :)
Josiah Blackie
2020-09-10 15:38:05 +0000 UTCDoes the eye tyrant come with a version without the eye rays?
Cary Porter
2020-09-10 15:32:53 +0000 UTCIll be adding this to my collection
Robert West
2020-09-10 14:58:12 +0000 UTCAaand there it is! Thanks 😊
DrHolliday
2020-09-10 14:24:29 +0000 UTCAdded to my collection ❤️👌🏻😁
MinionMancer
2020-09-10 14:15:10 +0000 UTCAmazon add-on backer: just chiming in to say I don't have anything in my email yet! No rush but just a heads up in case others are having the issue too 😬
DrHolliday
2020-09-10 14:12:36 +0000 UTCGonna buy this as soon as i get home from work
Nicholas Brennan
2020-09-10 13:47:33 +0000 UTCBought them a while back with the discount code so happy to have pre-supped versions now as well! Can someone with more experience with MMF advise, once we purchase items, they remain on my Library permanently correct? Would love to clear up some space on my laptop.
James Harrison
2020-09-10 13:47:20 +0000 UTCI'm gonna have to nab this set, I've really been loving your work. I'm really hoping to see some more combo sets of your older works, they're so many I wanna get.
Loki Frostborn
2020-09-10 13:47:19 +0000 UTCNice. As a new patron, the discounted updates are fantastic to slowly build up my AG catalogue.
Tyler Brenot
2020-09-10 12:57:28 +0000 UTCOh and I forgot to mention... Keep up the awesome work. I always look forward to your next creations.
Thomas Spink
2020-09-10 12:51:02 +0000 UTCThis would be a good example of Patreons sharing their monthly releases on MMF instead using Sync or Dropbox. Have you explored utilizing that option for future releases?
Thomas Spink
2020-09-10 12:49:15 +0000 UTCThank youuuuuuuu!!!!
R Boz
2020-09-10 12:31:18 +0000 UTCIf we have certain ones we bought off minifactory will we get the updated supported files?
Pandaxsaurus
2020-09-10 11:42:16 +0000 UTCGreat work, thanks a lot. Just a small request, but could you in the future leave the bigger models solid? The thinkness and the holes are somtime off, i would like to do it myself but Chitubox cannot hollow a modell that is already hollow since it only hollows the space between outer and inner wall.
Herudo
2020-09-10 11:40:21 +0000 UTCUgh thats so sad, I bought them this morning without the 50% off.
Matthew Lundie
2020-09-10 10:40:19 +0000 UTCReally looking forward for the supported version of Uldar Druidical Beast Form that I just bough!
Alexander Wiens
2020-09-10 10:13:14 +0000 UTCThese are sweet, iam getting them right now!
Robin de Saire
2020-09-10 10:10:30 +0000 UTCWonderful work. I only have the pinup from that release. Very excited to snag the rest now!
Sylvaria Malice
2020-09-10 09:38:36 +0000 UTCI mean from these set, now I see that my question was quite uncertain
Tomás López López
2020-09-10 09:35:15 +0000 UTCcareful with those squidlings swimming in it! :O
Artisan Guild
2020-09-10 09:34:28 +0000 UTCall our old models are getting updated, one by one. It requieres some time :)
Artisan Guild
2020-09-10 09:33:37 +0000 UTCPool is on the printer as we speak :)
DungeonTokens
2020-09-10 09:25:37 +0000 UTCThank you, Artisan Guild! Another incredible set to add to my collection.
LordHoratio
2020-09-10 09:22:50 +0000 UTCContact MMF support and they'll find a solution for you.
LordHoratio
2020-09-10 09:21:30 +0000 UTCLove them, as usual. It feels like AG have 2 releases a month right now. So good.
Adam Randall
2020-09-10 09:21:02 +0000 UTCThe models that doesn't have supports won't have supports at all or are they getting a presupported version in some kind of update?
Tomás López López
2020-09-10 09:19:47 +0000 UTCDoh, I used the regular 1-10 days 30% code a few hours ago when I saw them :(
Ruben Neil
2020-09-10 09:15:29 +0000 UTC
