Fighter Guild Set + Tarasque - October 2019 Release

check your pm :)

Artisan Guild

Hey Artisan Guild, I've been a patreon supporter of yours since September but I just noticed that i had missed this set, is it possible to get this set still? Thanks!

Hey, add-on was a special offer in the KS

Artisan Guild

check your pm :)

Artisan Guild

Hi Artisan guild!, I also missed the October sets, is it still possible to get them? I am very new to patreon but pledged to you in October. I am also a kickstarter supporter too! I will try not to miss the newer ones and download them early from now on.

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

Hi, this might be too late: I'm a late backer for the Amazon KS, how do I get access to the add-on option?

check your pm :)

Artisan Guild

I too missed this one along with the september set(the download link didn't work at the time I tried)

Jakob Frederiksen

If I missed the October set, although I paid for it, how do I get it?

Travis

As with some of the others here, I also missed this one :(

Hi there. How do I get the October set? I forgot to download it last month. (I have been a subscriber since August)

Jason

I didn't know how to download this file. I started support in october, would it be possible to get the link? Thanks!

Hey I missed the october set (supporter since august), is it possible to receive a download link?

Mike Liebke

Hi! Somehow I didn’t download the Fighters guild file. I must have confused it with some other download. Needless to say I’m quite bummed out. Any chance I can get a link as well?

Robert Harbo Staun

Hey there! I subscribed to Artisan Guild in September. Was away on tour and missed out on October..any chance I can still get a link? These look AMAZING

check your pm:)

Artisan Guild

Hi! Due to travelling for work and moving houses, I missed out on downloading Oct months files. I've been a patreon since Sept, is there any way of getting the download link?

Hi guys, I missed out on downloading this set in October because we were changing internet providers. I've been a patreon since august, any chance of getting the download link or is the only option to purchase from the store?

check your pm :)

Artisan Guild

Hi. I've started contributing with your Patreon last month. How can I access the October files? Or are they available only for that month?

André Nuñez

Hi! I wasn't lucky enough to time the download of the 2 "Troubles in Taverns" free bonus figures. I participated during oct and already have the fighters guild and the tarrasque, but lost the window for the two extra minis. Is there any way that I can get the link for those?

Agustin Medina

I'm sorry to bother but I downloaded this pack once it came out. I'm just coming back now to download November's and am realizing the two tavern bonus figures were added to this pack later in the month. Any chance I can still download them? Thanks : )

hello you get this month :)

Artisan Guild

it is now working :)

Artisan Guild

Same here. Maybe I havent full understanding of your shedule. I got a Patreon today. Will my first pack be the last months or this months one?

I can't make the code work. Is there a process that makes it available to Patreons only because that could be because of that as I subscribed the 1st november (wish I did the day before for this pack ;-) )

Jérémie Mosset-Chafik

I am new to patreon it looks like from the other comments that files can only be download for that month? If so, I have also missed downloading and I apologize, but could I also get the code? Thank you so much, your models are amazing!

same here, cant get the code to work. :)

Trying to purchase more of the previous models from store and the code isnt working...:(

Sinister Snickers

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm

Artisan Guild

erf... I forgot to download it

Thank you for telling us! We just contacted MyMiniFactory manager to make it work as soon as possible. thanks again :)

Artisan Guild

Hello, unlucky we need to wait for Patreon to process the new months payments. As your pledge on Patreon is tied to this month, you're meant to receive this monthly release, not the previous one.

Artisan Guild

I think files should be accessible, until the new package is released, kinda frustrating not having the listed package as the "month release".

Mert Usta

Hello. My Patreon member discount code was not accepted on myminifactory.

Tom Rolland

Had the same issue. Would it be possible to open the link for a day more to help out all the new patreon newbies (like myself)?

Jan van Nyenrode

Hopefully, we still going to get Stl for October.

Link is expired. Please send help

Serp

i just signed up as a patron and the link is expired, and patreon is saying i get charged for november in an hour... so can i get a working download or did i just lose 10 bucks for trying to get in on the October bundle?

EDIT: Disregard - I was a good little patron, and downloaded at the very beginning of the month to avoid the issue. I have been trying to access the files for the past 24 hours, to make sure I got it before the end of the month. Is the link broken, saying it doesn't exist? Didn't know if it was a traffic issue. I had to get my computer back to do so, and thought it went right up until midnight on the last day of the month? Maybe I am mistaken...

Chris Winn

Greetings I extracted the ZIP file and my Korg 2 Headed dragon file is corrupted and the links no longer work :(

MrFryGuy

I also can't access the links, could i get access again?

I cant access the link, i already downloaded the set, not the troubles in taberns addition, could you please send me the link for them?

Emilio Javier Micheletti

Hi. I also just subscribed and the links are not working

possible to re-link please?

Eliot Lyons

Hi Just subscribed. May I get access to the files?

Hello, just subscribed. May I get access to the files?

Billy Buffet

check your pm :)

Artisan Guild

I haven't managed to download the October files yet, (I was hoping to have my new computer by now but the order has been delayed), Are the links still active?

Donna Crawford

check your pm :)

Artisan Guild

I tried to open the terrasque and the link seems broken

I missed the kickstarter, can we buy pieces from this? I really want the Medusa and the panther queen minis!

I would really like to see in the future a Fighters Guild 2 bundle with bows and crossbows! And two handed swords maybe as well!!

Sak Knows Best

Try to unzip it in another program. I have the same problem, when trying to unzip in Total Commander. After that I have found, that if I do it directly by Windows Explorer, then everything works fine. Strange, I know.

Happy

Please provide Tarasque as a whole model. I do not wish to print it in parts.

in the fighter guild folder

Artisan Guild

korg and brend .....

Andrea D'Amore

In this post there are 2 link for the download... One of these is the Tarasque :)

Artisan Guild

In witch folder are the bonus miniatures?I have not found them

Andrea D'Amore

Link doesn't work on app, fine on desktop

Matchu Egan

Artisan guild not if the link isn’t working inside the first , I am afraid this isn’t the first time it has happened to me 🙁

Jim Allen

they are inside :) but you can just download their folder

Artisan Guild

go into fighters guild link and they are bundled in there

Alex Lopez

i have same problem :-( do I have to download the whole monthly package again? and new models are in it or? Thank you for your help

jaman

There is no link for me to get them ☹️

Jim Allen

When I try to unzip the download all sync zip I get a Failed CRC check.

Michael Klinger

One of the issue is, Google is picking this up as a virus. You just have to whitelist the site and also white list the stl's

check your pm :)

Artisan Guild

We will investigate the problem today, it's very strange. Unlucky Dropbox (premium) gave us the notification that we exceed the download limits, even on their paid subscription. That's why we had to switch on Sync :(

Artisan Guild

Hello Peter, please try on another device, as it worked fr everyone else. Unlucky Dropbox (premium) gave us the notification that we exceed the download limits, even on their paid subscription. That's why we had to switch on Sync :(

Artisan Guild

Hi i'm having problems downloading this months pack from sync.com it wont pack a zip, is there a dropbox link like normal?

Peter Seymour

I've just become a patreon and would like to print it 100% as well. Since I'm quite new to the whole thing of 3d model printing, could you share picture on how to properly set the supports to not waste 8+ hours of printing on wrong settings. (sry for bad eng, not my first lang)

Sync.com is failing to download this, the Welcome Box and anything other than single files. It always gives "151011 An error occurred creating zip" or just hangs forever (or at least 10 minutes) on "Calculating size - please wait". Is there Dropbox link or something more reliable than Sync.com. I've tried multiple computers and both Chrome and Firefox.

Brian Todoroff

When trying to use the "download all" button on the website it fails to create the zip...the only way I can download is to download each STL file. Am I doing something wrong?

John Watson

New here, so maybe I am doing something wrong, but anything what I have downloaded from SYNC in zip file is corrupted (CRC error) and cannot be unziped :( I have tried welcome pack, Tarasqu, fighters guild, all the same ...

Happy

New to your works and I must say I love them already! I really love the bases but usually do the rounded bases. Any chance you can make rounded or know of a way to convert them to base inserts for easier printing? Thanks and keep up the great work!

LOL I litterally just came here to ask this :)

Kady

Is it possible to please get an assembled version of the Tarasque model? I am trying to scale it down a bit for use in my game and having him assembled would ensure proper scaling and fitment for all parts. And also give me the option to print him as one piece , which I am tempted to try :) Thank you!

Kady

Any chance of releasing big monsters as one whole sculpt as well as the individual files?

Alan Devine

Hey. Im 4 pieces of Tarasque in. I forgot to scale it down si it is 100%. It is realy HUGE. https://imgur.com/2o2vO6M https://imgur.com/Ldr0qRE https://imgur.com/HFeTeYK Cant wait to print whole monster. It will have more then 30cm I quess. Very nice sculpture

Not sure if this is the section to do any recommendations for monthly releases, but would love to see Centaurs or Dragons

Alex Lopez

I'm Scaling down to 93%, close enough for me with out getting to fiddly.

Che Phillips

How much do you scale them down for D&D?

Jorge Zaragoza

Hey..did you already release the epic angel guy? Can't seem to find him.

Michael

Are you planning to make more/bigger (as in more units) modular models in the future? These are really great!

Mäx Rakete

From the App strangely enough it doesn't work. The app seems more like a beta than a finished product. We tried on browser and Tarasque download and show files perfectly, not sure on what's happening from your browser. Are you using chrome?

Artisan Guild

200mm

Sean Croteau

I found I cant open links in the APP. I have to utilize the web browser. But now, I downloaded the terasque file and all the files say 0 bytes and there is nothing to view. Something I'm doing wrong? Haven't had this issue before.

Joshua Westman

I cant click the links

Joshua Westman

what size base will the tarrasque fit on?

BennyMcSeoul

Thanks for spotting that! It's corrected now :)

Artisan Guild

Hey :) yes ad Greg says better to mirror it. The release s are areound 500MB and if we are not careful with cloned pieces it becomes easily 1 GB. That's why we include weapons in one side, you can simply mirror it :)

Artisan Guild

Is the Pectoral_Right of the very cut up chest missing its key (the sphere) sections or is it not supposed to have them?

Benjamin Hodges

I swear looked around my slicer for probably an hour before asking... thank you for the help, I found it after I read your comment ><

you can mirror anything

Greg Kourakos

Should the modular fighters have a Left and Right version of each weapon? its looks like they might in the picture.

price is not a problem (any service is cheap actually). Sync is the only one with unlimited band :) So at release day everyone can get what they pledged for

Artisan Guild

Well, Sync looks to be working well - slow download speed, but hopefully won't be too expensive for you guys.

John Norton

we met the traffic Limit, we are making a new working Link in less than 1 hour :)

Artisan Guild

we met the traffic Limit, we are making a new working Link in less than 1 hour :)

Artisan Guild

we met the traffic Limit, we are making a new working Link in less than 1 hour :)

Artisan Guild

we met the traffic Limit, we are making a new working Link in less than 1 hour :)

Artisan Guild

we met the traffic Limit, we are making a new working Link in less than 1 hour :)

Artisan Guild

we met the traffic Limit, we are making a new working Link in less than 1 hour :)

Artisan Guild

There is a 404cerror on the download ;oml

Jon Lamkin

I get the following error when following the download link: 404 We can’t find what you’re looking for.

Craig Stokes

Same says limit reached

Gavin smith

Still not working

liiink

joshua

Yes but Duncans current service Sync is a nightmare its slow it crashes and the download all button almost never works without an error, last month it took me weeks to get his files. I hope Dropbox opens up today again its usually more friendly than this.

Whiskeyjack

Link not working

Jorge Luis Aragón Martínez

Dropbox limit happened to Duncan Louca a few months back as well. He had to change services

Chris

Yeah not working for me either!

Matt

Oh no Dropbox is not letting me download :( it says Too many requests Sorry, this link has been automatically turned off for now Nooooo!!!! I'm now fully addicted to Artisan Guild Minis and I'm hurtin' for a fix before work

Whiskeyjack

Link is down due to traffic limits :(

Ondrej Masin

we are making an extra version with more cut to fit the bed :) coming in the next hours!

Artisan Guild

we are making an extra version with more cut to fit the bed :) coming in the next hours!

Artisan Guild

we are making an extra version with more cut to fit the bed :) coming in the next hours!

Artisan Guild

15 to eyes. we are making an extra version with more cut to fit the bed :) coming in the next hours!

Artisan Guild

it's not in the plan right now but I think that the Modular could work for blood bowl (fist only), no? :)

Artisan Guild

These fighters look amazing! Can't wait to print them. If I may... the helm option is sooooo cool. Would it be possible to get it as a standalone bit so that i can print just the helm and use it as a conversion bit for my stormcast?

Octavio Carlo

I love your models. Do you think to do Blood Bowl teams?

Join the kickstarter Amazons!! Its cheaper and it will help to reach the stretch goals!!

Bernat Rovira Lastra

Is there no discount code this month? OR am I blind?

Matt Fu

This is a spectacular release, Amazing work!

Hey! Can you pls add a great sword for the Fighter Guild? That's a big wish form me :D

Perfect :)

John Norton

Please wait, i'm making a version to fit resin printer too today :)

Artisan Guild

Yep, unfortunately the Tarrasque's upper and lower body are too big for the Photon. I had to resize it down to 62% and angle it. So I guess I will slice it right through the middle and work later in glueing the two pieces together and repair any possible damage.

victorgonal

Great to see the cutting room floor in there now and also the improved folder name - very useful :) Also will there be an update to include all the images or should I just potter off and find them? I only ask as its so much easier to track down the right model quickly with images included. (edit: NM, I got them - could be useful for others though)

John Norton

Have a go at cutting and pinning in Meshmixer, it's a useful skill to learn and it doesn't limit you with the mars build plate :)

Galli3d

yeah for me, the lower and upper torso both don't fit on the buildplate for my Elegoo Mars.. having them both cut once more would probably do it...

BennyMcSeoul

Damn I was super happy to see the tarasque, only to be disappointed cause it's literally too large for me to print on my elegoo mars. Still looks snazzy though...

ssandulak

Amazing as always. And best beauty yet!

Thomas Stalhood

Holy cow the tarrasque is gigantic! Love the models for this month :)

Anders Knight

This months Beauty is amazing. Fantastic work all the way around. I can't wait for the Elven Rangers (whenever they come around), and hopefully a mages guild at some point. :)

Stephen Brewer

amazing models as always! your models make me want to buy another Resin printer so I can see what they look printed quicker, lol.

3DPrintingAdventures

whats the size of the tarrasque

Eric De La Rosa

Also if you need help there are plenty of great guides on the internet to assist you in this. GL fellow Guildies!

Mzak

Hi Everyone, Just a heads up if your going to use resin to print that giant beauty. If you are using chitubox slicer you can hollow out the print to save on resin. I would 100% reccomend that to save alot of money on resin. you will also need to burrow some holes in the print to he prevent suctioning issues. I will be placing mine for example on the left foot beneath the foot itself since it will be on a base after the fact and one at the joint to ensure I will not have suction issues and to allow extra resin to drip out. I will also keep the holes i dig out to place back into the holes to ensure that Should some resin somehow not finish curing correctly I will have it fully seal and it can naturally finish its curing over time before painting.

Mzak

the fighters are fantastic! love the knights.

Alex Lopez

Nice, a Tarsque which actually looks as terrifying as it should for a change.

Maeyanie

Yeah, I'm trying to figure out the largest I can print it so far it's like in the 50% range

John Wigger

oof that chest section is just to big for my resin printer. never the less where there is a will there is a way! I will make this thing stunning one way or another!!!!!! So Happy I found this place!

Mzak

You have done it again 😊👏

Andre Vo Nyseth

Yeah, I was trying to size it up for the Elegoo Mars and like 54% was the largest I could get the chest :)

John Wigger

Awesome. Was just about to ask if you could cut the torso up some more for resin

Matt Dowis

Guys the Tarasque may be big at fullsize for some printers, we will simply make a version with an additional cut in the torso for who needs a super giant lizard ;)

Artisan Guild

This is so awesome.

Joshua Still

Well done! Thank you

this set is so huge !!!!

Deathclaw!!!!!

John Madigan

hehe, and 'cutting room floor' mini has a hearthstone on her belt! love it! :D

Joey D

Awesome!!! 👏👏👏👏

Emilio Javier Micheletti

excuse me a second... I just need to pick my jaw up from the floor :O just... wow, that Tarasque... simply awesome! thanks!

Joey D

YAAAY, Can't wait to print these. They are in top of the queue after my PC mini's who have priority :D

Joris Kelderman