Cassete Keychain (Free version)
Added 2023-02-14 10:12:33 +0000 UTCThe cassette version that includes the case is available here if you subscribe. Also available on cults3d:
https://cults3d.com/en/3d-model/home/cassete-keychain
For my patrons I will publish a version with two reels 📼, in early access 🥳
Free download version:
- Cassette_whole(increased clearance).stl
Version is relevant for 0.4mm nozzle. There is a clearance of 0.3mm between the reel and the body.
- Cassette_whole.stl
There is a clearance of 0.18mm between the reel and the body. Version is relevant for 0.3mm wall thickness (respectively 0.3mm nozzle) at 0.15mm layer. If the wall thickness is 0.4 mm, set the horizontal extension to -0.05 mm (negative value). By default, this value is zero.
Anyway, when printing is done, the reel must rotate hard. I applied silicone grease Glidex and washed with water, after which it rotated perfectly. By the way, this is the case when WD-40 is not for good.
