Alimrothi Raiders - June 2021 STL Pack!
Added 2021-06-01 10:18:48 +0000 UTC** NOTE: Links have been removed for the new month. If you'd like to purchase this pack please buy from our website otherwise if you were a patron in June you should have MMF redemption in your email. If not, just message us here on Patreon for us to organise :)
June is here already and so is our third pack! What an exceptional month we had in May and we cannot thank everyone enough for their support. Whether you've continued supporting or are new for June, welcome! We have been hard at work for our most ambitious pack yet and we hope you love these unique and diverse models!
A technology fuelled nordic menace plagues the northeastern seas of Tharador, laying waste to any ships that cross the path of their airships above, or pillaging any village unfortunate enough for them to set their sights on.
Included in the pack is:
- 1x presupported* high quality Viking Airship “miniature” measuring almost 300mm long
- 9x presupported* high quality miniatures in 32mm and 75mm scale variants
- Alimroth Raiders – the elite officers of The Ørnevinger, including Barnard Mjolnir, Bjorn Branndanser, Ymir Tresarg and Vidar Lars.
- Protectors of Mayreth – Guerilla fighters defending their homeland, including Freya The Fearless, Aedre The Angry, Rheda The Revered and Nils Olav The Defender
- Special Model Swap with Yasashii Kyojin, with their amazing model Maiden – Second Form which represents one of the guardian celestials of Mayreth. MyMiniFactory Patreon
JUNE PATRON DISCOUNT CODE (MMF and DMSTASH SITE): STEAMKING25
Thank you all for your support! It means so much to us. We are already hard at work on our July Pack as voted for by our community - Sultans of Sudd Tohst!
!!!MERCHANT NOTICE!!! : Auril Maiden from Yasashii Kyojin is now included in this month's merchant license.
Comments
As I stated before I have a large printer that can accommodate larger models. That is not a valid solution either, as that one piece 'for ref - not printing' is only a combination of the multiply pieces and has so many errors it is unfixable with all the gaps. That should prove my request as that doesn't even line up correctly. I guess I am not understanding how you don't have the original full piece which is what you needed to create all the sub pieces.
Kevin Morse
2021-06-14 16:46:23 +0000 UTCHey Ramiro, it is definitely something we have planned for the future when we can! Currently all our efforts are being put towards creating our monthly model packs, we will begin slowly putting together models for a welcome pack but have no ETA on when that might be right now. As we grow it will probably become a bit easier :)
DM Stash
2021-06-14 11:31:21 +0000 UTCIt's because of your Model Swap with Yasashii Kyojin that you came to my attention and I'm glad for it. I'm now a subscriber. Excellent models with great detail but the biggest draw for me is that your miniatures come in 32mm and 75mm scale variants. I love this because I can paint the 32mm for the table and then take my time and apply all my efforts for the 75mm to display. I do recommend you put together a "Welcome Pack" to help attract new subscribers. A good "Welcome Pack" can often bring you a sub that is trying to decide between yours and another Patreon. I love miniature art and so I'm sitting around 45 sub to Patreon. I'm pretty confidant in my advice. I hope you grow and create many more wonderfully detailed miniatures. Thanks.
Ramiro Carrasco Jr.
2021-06-13 21:06:02 +0000 UTCHey Kevin, not sure if it would even fit in two but if you want to give it a go there is a single piece .stl in the post. Take that and split it in meshmixer or another software so you can print with your own splits.
DM Stash
2021-06-11 23:43:00 +0000 UTCHello, is it possible for us with larger printers get the air ship in 2 pieces? like a front and rear. I am not sure how you split the 16 different pieces for the large balloon however they are horrible on the fit. I have been trying to combine so that I only have 1 seam however all attempts have failed due to pieces not lining up.
Kevin Morse
2021-06-11 19:17:50 +0000 UTCHey All! All Pre-supported models have now been added, plus there is a link to download the newly uploaded ones seperately so you don't have to get the rest again. Airship unsupported is now uploaded with the supported version uploading now and will be updated in the link!
DM Stash
2021-06-05 06:26:16 +0000 UTCAh that makes sense! Well consider it done for our next month's release :)
DM Stash
2021-06-05 01:23:04 +0000 UTCI don't mind the 32mm/75mm folders. That isn't a problem for me. (An example of that which makes sense would be a master folder then 2 subfolders for the sizes as example.) A way for you to see this work out is when everything is downloaded, you select a series of zip files (or rar archives) in Windows, then right click them: there is a WinRAR extract optionset - I use either Extract Here or Extract each archive to separate folder. A user should be able to do that once for all zips and it expands out into a completely organized set of folders matching your original setup. It takes a bit more to organize on your end but all the Patreons will be very happy they can use one action to manage all of the zips. To zip up a series of folders you can use the reverse feature in WinRAR too! Once you have the perfect set up of folders, you can select all the subfolders, right click on it, choose WinRAR add to archive..., choose the Archive Format, and then under Files Tab there is a option to Put each file to separate archive (this will create a set of archives for each folder using the folder names and keeping the folder structure perfect.) Using this feature has saved me a ton of time organizing.
ARM
2021-06-03 15:24:18 +0000 UTCHey ARM, thanks for the feedback. We can try keep to a uniform folder structure. The reason some of the folders are split into 32mm and 75mm folders is when there's 3 or more parts to the model. This is just because it gets confusing, especially for the pre-supported variants with their LYS files, meaning there can be up to 16 files in one folder. Also didn't notice that there was a .rar file in there. Have fixed that up and reuploading now. As per our note, the other 4 supported models and Airship will be uploaded June 4th :) Thanks for your constructive feedback and support! We are always aiming to improve :)
DM Stash
2021-06-02 08:04:26 +0000 UTCThanks for the awesome release! However can we at least keep the same folder structure for each set of minis? I organize by folder, and some need folders added upon extraction and others do not while others need to be renamed. (It makes it more time intensive for me to organize it all correctly.) For example one patreon I subbed has a hierarchy of all the folders to the master top level one so you only ever have to extract to the same location every month and everything gets put perfectly in their place based upon how the Patreon Developer organized it. (Also not mixing RAR and Zip files. Please keep to one format for all files. This release felt very slapdash. (Also missing 4 Supported Models?)
ARM
2021-06-02 03:38:18 +0000 UTCAnytime!
Yasashii Kyojin Studio
2021-06-01 11:18:30 +0000 UTCNo problem! thanks! I'm looking forward to it!
Gil L
2021-06-01 11:15:10 +0000 UTCThanks for your beautiful sculpt mate. Fits perfect with our models! ❤
DM Stash
2021-06-01 11:05:30 +0000 UTCHey Gil, sorry my bad if that wasnt clear in the post. Yes Airship will release on the 4th. Due to its size we will make it a seperate DL link too :)
DM Stash
2021-06-01 11:04:42 +0000 UTCHey, well done this month they all look fantastic, however i noticed that the airship (unsupported) isnt included in the pack as yet? will you be releasing the airship supported and unsupported together on the 4th?
Gil L
2021-06-01 11:01:19 +0000 UTCEnjoy!
Yasashii Kyojin Studio
2021-06-01 10:22:35 +0000 UTC
