Squirtle Planter Giveaway! (3D Print Without Supports)
Added 2022-10-23 16:39:00 +0000 UTCDownload Link:
https://drive.google.com/drive/folders/1gqLVx-rEjKKD2E7yJCNBSJ1AweIYqZ2m?usp=sharing
Comments
Heyy love this! is there Bambu Lab version? i've tried to paint the different sections but it seems to always paint the entire model
2023-05-02 21:48:41 +0000 UTCI cannot find file that’s split already just one that isn’t.
Cody
2023-02-27 03:19:58 +0000 UTCYes I prepared both version split and without split :)
2023-02-27 02:30:37 +0000 UTCdid this file ever get split?
Cody
2023-02-26 16:42:10 +0000 UTCAny chance that you could move the planter 3” away from the pokemon? It is too close that even a small succulent gets in the way…
2023-02-09 18:24:41 +0000 UTCFor sure 😃
2023-01-10 00:53:07 +0000 UTCNEED MORE PLANTERS!!! Cant get enough of them. Need one of every pokemon!!!
2023-01-10 00:50:41 +0000 UTCHere you go! https://cults3d.com/en/design-collections/scrazyone/planters-pen-holders
2022-12-05 05:14:19 +0000 UTCWere can I get the other pokemon planter I am a member happy to pay for them.
2022-12-05 05:08:11 +0000 UTCWhich size planter does the file hold at stock scale? Also, would love a Gengar planter!
Andy Rushent
2022-11-07 14:21:06 +0000 UTCYou can request on next Giveaway :)
2022-10-29 03:27:24 +0000 UTCAwesome planter! Any chance we could see a Greninja sometime?
Josh Helton
2022-10-28 23:50:43 +0000 UTCI get the same quality and faster speeds with my 0.6 nozzle. Even using it down to 0.16 layer height
2022-10-28 22:58:01 +0000 UTCYou can create your own slices with the file
2022-10-28 22:57:06 +0000 UTCI’m guessing that it prints faster with a 0.6 nozzle.
Omar
2022-10-28 22:44:29 +0000 UTCQuestion: how is the quality with a 0.6 compare to a 0.4?
Omar
2022-10-28 22:43:51 +0000 UTCMeshmixer will not work since there are not multiple shells.
Omar
2022-10-28 22:42:23 +0000 UTCWhat issues are you having with your print though? Here are my settings for my Artillery Hornet: Nozzle size: 0.6 Layer height: 0.2 Bed initial temp: 70 Bed temp: 65 Support: none Bed adhesion: skirt
2022-10-28 17:23:32 +0000 UTCWould you mind sharing the settings for the pla print. I just can’t get it to print right.
Omar
2022-10-28 17:18:19 +0000 UTCwould like that split file as well, too lazy for meshmixer lol
2022-10-28 12:23:03 +0000 UTCI printed in both Resin and PLA
2022-10-28 11:59:55 +0000 UTCDid you print it on resin and/or pla?
Omar
2022-10-28 11:55:09 +0000 UTCI join the request
2022-10-28 03:31:06 +0000 UTCYes for sure 😃 let me prepare
2022-10-26 17:58:25 +0000 UTCwill it be possible to split it into two files to print them separate?
Omar
2022-10-26 17:55:12 +0000 UTCPrints perfect
2022-10-24 17:38:54 +0000 UTCWow. My favorite
2022-10-23 17:29:29 +0000 UTCWow, this one takes the cake!
2022-10-23 16:51:07 +0000 UTC😍😍😍
Virginia Thai
2022-10-23 16:39:43 +0000 UTC
![Someday*[サムデイ]](https://nokimo.com/istorage/107168.jpg)
