While the STL files for November's fighter, the SF-135 Drachen, did release at the end of November, the full official box art and ortho illo release is going to be dropping soon this month (working...
2022-12-11 21:30:32 +0000 UTC View PostPost header say it all, I hope everyone's having a Happy Thanksgiving!
Enjoy the holiday weekend!
This is one of the first few test prints I've run of the new SF-135 Drachen fighter. The fighter has been printing pretty nicely overall but I've been tweaking and adjusting the supports with each ...
2022-11-14 01:26:46 +0000 UTC View Post
A couple of new Sharurä painted prints to share. We have a dark spotted camo red tip paint (quite happy with this one, it's a variation of what the pending Navaja 121% tutorial paint looks like) a...
2022-10-19 01:46:18 +0000 UTC View PostQuick update:
As the header states, I've ordered the replacement LCD for the Elegoo Mars 2 Mono, along with some more resin (Elegoo gray), and some Kapton tape to seal the screen after I ins...
So, it appears the LCD might have caused a print to catastrophically fail to the point it punctured the FEP, or the reverse; the print failed causing the FEP to leak and that resulted in the LCD is...
2022-09-17 12:27:03 +0000 UTC View Post
The most recent SF-123 B Möwe painted print that has been making the rounds on various social media platforms to promote the prints. This one was painted with Tamiya Light Blue (Luftwaffe) base co...
2022-09-11 00:13:48 +0000 UTC View Post
It's looking like the sleek looking SF-106 A Sidewinder will be September's primary STL release. This fighter is a revisit of an 2022-08-25 14:23:08 +0000 UTC View Post
Here's a collection of photos of the initial test print for August's pending STL release; the SF-123B Möwe. This is a very quick, and dirty, paint on this print. ...
2022-08-06 16:02:57 +0000 UTC View Post
These are the two new fighters I noted in a prior post. For now I'm just dropping a collection of quick Zbrush renders but there are indeed 3D prints of both of them now with photos to follow.
<...
The weather's been stupid hot much of the last week so I haven't really been printing as much as I planned. What I have gotten to is doing more painted prints and I'm also working on a tutorial, on...
2022-07-22 20:35:09 +0000 UTC View Post
Just a short and quick update; as the header states, up for next month will be the TE-46 Javelin D variant of the very first fighter release, the original 2022-06-22 21:42:09 +0000 UTC View Post
Here's a collection of photos of a new painted print of the Sharurä A.I. gunship. This is, of course, somewhat similar to the Sharurä box art, though a bit different as well, wit...
2022-05-27 17:43:18 +0000 UTC View Post
But may be delayed a few days later than the usual prior early month releases, because...
I, apparently, got the Covids.
On Monday, I went to a close friends wedding and, while I have...
I'm pretty sure this one's going to be the release for May. Unfortunately, the weather here in Michigan has been all over the place and has continued to be cold (that warm spell I noted a few posts...
2022-05-01 02:07:19 +0000 UTC View Post
Coming sometime early in the month (as with prior releases) will be the U.A.P. alien fighter. The end of March was rather hectic so I didn't get a chance to drop an end of the month post announcing...
2022-04-01 22:32:44 +0000 UTC View Post
Surprise stealth reveal of two brand new variant designs of the original Javelin and Ballista fighters. Obviously they have resulted in successful prints so they both will get released soon. Now th...
2022-03-18 20:10:00 +0000 UTC View Post
I can haz test print?
indeed I can.
Not a lot to say about this one and that's a good thing. This first test print, produced on the Elegoo Mars 2 Mono, went without a hitch. I've now ...
Unidentified Aerial Phenomenon, or in old school terms: UFO. This is the first true enemy antagonist fighter to potentially join the 3D fighter print series. An alien enemy to the fighters that hav...
2022-03-10 23:27:10 +0000 UTC View Post
Working on the art package for the TE-62 Navaja fighter so it can drop sometime in early March. The Navja has, like the Stiletto, consistently resulted in fantastic prints for me so it should be a ...
2022-02-22 22:53:19 +0000 UTC View Post
The more I work with resin prints the more I see similar things you learn with making the 3D models themselves; namely painting the prints is not too dissimilar to changing the material on your 3D ...
2022-02-10 16:23:18 +0000 UTC View Post
Today I have some quick and dirty photos of the first (and utterly successful) test print of the newest fighter to the Military Spacecraft Series; The TE-65A Sharurä A.I. gunship....
2022-02-09 23:36:48 +0000 UTC View Post
Military Spacecraft Series .03 will be the TE-60 Stiletto fighter...
2022-01-28 02:29:28 +0000 UTC View Post
Well, I can't say 2021 was a swell year, nor was the year prior, a mess of a global pandemic kind of changes things and now, for better or worse, we seem to have a new normal. That said, with a pos...
2022-01-01 01:46:50 +0000 UTC View Post
It's been some time coming but it's finally officially live. The first STL files are now available and the fighter this month, as noted in the prior post, will be: The2021-12-02 16:11:30 +0000 UTC View Post
So, finally, here we are: The Javelin will be the first printable fighter to be available for download. The Javelin will be number .01 and the first fighter to kick off: Small Scale Resin Printed R...
2021-12-01 00:02:54 +0000 UTC View Post
As noted in the last upload post, while I still produced work, 2020 wasn't remotely as productive as I would have liked it to be. I will be far busier this year, including more pending freelance (s...
2021-03-25 01:52:17 +0000 UTC View PostYes, after a good year of random, off and on, blue screen issues, with a relatively new PC (just over a year now) it seems the source of the issue is resolved.
Apparently it was a bad stick ...
Apologies for the late attention for the page for April, it's been quite the 2020 so far... not the 2020 we all hoped for or expected. And for God's sake... toilet paper? Really? I would have...
2020-04-30 15:53:05 +0000 UTC View PostAs we roll into 2020 the last year has been a bit of trial and error as to finding an approach here that feels right for me and helps grow Patreon as an eventually successful endeavor.
My o...