Hero Me Gen7 Release 2.0 NOW AVAILABLE!
Added 2023-01-19 11:17:21 +0000 UTCI am proud to present to you the latest, greatest version of the Hero Me Master Suite... Gen7 Release 2.0!
Download the Attached ZIP containing organized folders with all the STLs of Hero Me Gen7 Release 2.0.
All the remaining Gen6 Gantry Adapters and ABL mounts have been converted to Gen7 format.
There are 84 new and/or updated STLs in Release 2.0.
- 1 Hero Me Base
- 25 ABL sensor mounts
- 10 Extruder mounts
- 23 Gantry Adapters
- 10 Hotend mounts
- 3 new Workbench Stand STLs
- 8 Part Cooling Ducts
- 4 Misc. STLs
This second release of STLs for the Hero Me Gen7 supports:
- 74 3D Printer models (plus clones)
- 30 Hotends and mount options
- 30 Extruders and mount options
- 38 ABLs and mount options
- 51 Part Cooling Duct options
- 12 Cable Management options
- 9 ADXL345 mounts
- 4 LED bar mounts
Hero Me Gen7 now supports OVER 3 BILLION possible 3D printer setups! Hero Me Gen7 has 47% fewer STLs than Gen6. Never fear, the Gen7 is a breeze for part selection.
Below is a continually growing list of the 3D printers that are compatible with the Hero Me Gen7. Many more 3D printer brands and models are supported by the community in either the remix section or in my collection of Hero Me compatible designs found on Thingiverse.com or Printables.com.
If you donβt find your 3D printer model listed here or in the remixes, become a Hero Me patron to have a gantry adapter created specific to your printer.
3D Printer Models Supported by the Hero Me Master Suite
- 3DFused X axis and Core XY kits
- 3DFused Master Plate (Hero Me)
- Anet ET4, ET5, A8
- Anycubic Vyper, Chyron, Mega Zero
- BLV Ender 3 Linear Rail Upgrade
- Creality CR-10
- CR-10 V2, V3
- CR-10 Mini
- CR-10S
- CR-10S4
- CR-10S5
- CR-10S Pro
- CR-10S Pro V2, V3
- CR-20
- CR-MAX
- Creality Ender 3
- Ender 3X
- Ender 3 V2
- Ender 3 V2 Neo
- Ender 3 Pro
- Ender 3 MAX
- Ender 5
- Ender 5 Pro
- Ender 5 Plus
- ENDER 6 CoreXY
- Most clones of CR and Ender
- Elegoo Neptune 2, 2S, 3, X
- Exoslide
- Geeetech A10, A20, A30
- Kywoo
- Labists ET4
- Lantro
- Longer LK5 Pro
- OpenBuilds Mini
- RepRap i3 Clones
- Sovol SV01, SV02, SV05
- Sunlu S8
- Tevo Tarantula Pro, Tornado
- Tronxy X5SA Pro
- Two Trees Bluer, Sapphire Pro/Plus
- Voron Switchwire
- Voxelab Aquila-Pro
- ZYLTech Gear V3
- Micro Swiss DD kit, Ender 3, 5, Linear Rail, Exoslide
- BigTreeTech HermitCrab
- PrinterMods Xchange
- PrinterMods MDD kit V1.2, V1.3
- Wham Bam MUTANT
- Wham Bam Universal X carriages
- Linear Rails MGN9-H, MGN12-C, MGN12-H
The following Hotends are supported:
- Creality Stock (2 screw mount)
- Creality CR-10S Pro (2 screw mount)
- Creality Spider 500 High Temp
- Creality Spider 350
- Creality Spider 3 Pro
- MK8
- Micro Swiss All Metal
- E3D-Online V6 & Volcano
- E3D-Online Revo Six
- E3D-Online Revo Micro
- E3D-Online Revo Voron
- E3D-Online Revo Creality
- Slice Copperhead
- Slice Mosquito & Magnum
- Slice Mosquito for Creality
- Phaetus Dragon
- Phaetus Dragonfly BMO
- Phaetus Dragonfly BMS
- Phaetus Dragonfly HIC
- Phaetus DropEffect XG5
- Phaetus Rapido HF, UHF
- Phaetus TaiChi
- Clones of any hotends above (note: look-alikes may not fit, just true clones)
The following Direct Drive Extruders are supported:
- Creality stock Single and Dual gear
- Sovol SV01 stock
- E3D-Online Titan
- Titan Clone
- Bondtech BMG (and mirror)
- Bondtech BMG-M
- BMG Mini (clone)
- Bondtech LGX
- Bondtech LGX Lite
- Orbiter V1.5 & V2.0 (and mirror)
- Sailfin
- Sherpa Mini
- Sherpa Micro
- Micro Swiss DD Kits
- PrinterMods MDD Kit
- Smartwatch Clockwork
- Voron Afterburner
- Voron Stealthburner
- Clones of any extruders above (note: look-alikes may not fit, just true clones)
The following ABL sensors are supported:
- BLTouch
- EZABL Pro
- EZABL Pro Mini
- PINDA
- CR Touch
- HallON
- Touch Mi
- TA sensor
- Omron sensor
- 8mm, 12mm & 18mm sensors
- Clones of any ABL sensors above
The following fans are supported:
- 4010 (single and dual)
- 4020 (single and dual)
- 5015 (single and dual)
- 5020 (single and dual)
- 4010 & 4020 axial fans for heat sink cooling
There are also several mounts for ADXL345 accelerometers and other options like endoscope cameras and analog dial gauges.
If there is a generally known component (hotend, extruder, etc.) that is not listed in this document, it is either not compatible (too large, etc.) or has not yet been tested.
Comments
Jason, your message was truncated. What is your question?
Andrew Soderberg
2023-04-09 01:06:28 +0000 UTCI have Ender 5+ and the gantry adapter seems to
2023-04-07 08:12:25 +0000 UTCHMG7 Ender 3 V2 Gantry Adapter V3.stl HMG7 Ender 3 Series Gantry Clip.stl HMG7.2 Universal Base V2.stl HMG7 Creality OEM-CR10S-Ender3-5 Mount.stl HMG7 Creality OEM-CR10S-Ender3-5 Skirt V2.stl Then the part cooling duct(s) based on whatever fan(s) you plan to use. and then extra like a heat sink fan should, and a cable wire management tower, ABL sensor, etc.
Andrew Soderberg
2023-04-02 04:10:09 +0000 UTCI am updating the Gen7 docs to be released in the next couple of days. I will be sure to add that info. That Gantry adapter requires the used of M3 Flat Head Cap screws so that they lay flush with the back of the Gantry Adapter. M3 Hex and Button head screws can't be used for those four mount points.
Andrew Soderberg
2023-04-02 03:58:23 +0000 UTCHi! @MediaMan3D, I recently bought some linear rails (MGN12-H) And I was wondering whether you would be willing to send me the step file for the MGN12-H front gantry adapter? As I have found that, when I screw the adapter to the rail block, the screws for the HMG7 base are protruding out the back and interfere with the adapter sitting flush against the rail block. Or am I doing something wrong? If so, could you update the docs to include some guide for mounting the HMG7 to the rail block? Or otherwise would it at least be nice to have a list of files which are needed for certain combinations of rail mounts. I have found that the HMG6 docs have some reference to which files are needed, but the HMG7 docs have none at all. Thanks!
Cypher156
2023-03-18 14:30:43 +0000 UTC
