R2 MKIII dome - Single, easy print....
Added 2018-08-31 08:05:30 +0000 UTCR2 MKIII single print dome as the 500mm bed interest explodes! I've revised the single print dome completely incorporating many "simplifications" to ease a single print dome with virtually no support. All details use a 70 degree overhand, which is virtually invisible but means no support on the panel lines. This domes has all the panels as part of the single print (of course the more complex models I've published can be used for opening panels etc). This dome also has the rings incorporated and a single internal "Lazy Susan" support ring, which can be modified / holes made for you specific susan. Overall, a single print, only three bits of support which will snap out (or use a hacksaw) as they're on 1mm strips and you've got a dome, both rings all ready to sand / finish. I've done the R7 dome in this same format and will release all the domes now in the MKIII format for easy printing but R2 was of course the important first one :-) Happy printing.... File available for testing in the early bird Patreon share and the file (as always) will be freely and publicly available in the next couple of weeks :-) https://www.patreon.com/mrbaddeley
Comments
looking for version 2 dome need the rings i think version 1 dome well work with the 2 bottom rings of the dome any help finding version 2 dome would be totally a big thank you
2023-06-24 01:08:56 +0000 UTCHello first of all thank you for this site and all of your contributions! I'd really like to start printing this R2D2 and make it fully autonomous. But i have no idea where to start... do you have a folder with all the files to print R2D2 together?
2023-06-02 08:43:52 +0000 UTCyou know how to get to the files
Pedro Blas
2023-01-19 00:26:14 +0000 UTCHi! Looking to make a BD and mini R2 droid, any 3D printer recommendations?
2023-01-15 21:37:13 +0000 UTCI am currently printing the dome on an ender 3, and have had no problems. I am using the 200 cut.
2023-01-06 07:53:19 +0000 UTChave anyone had issues fitting the center body to the upper section...
Pedro Blas
2022-12-31 02:28:14 +0000 UTCHi! has anyone printed R2 on an ender 3 size printer?
2022-11-19 01:38:18 +0000 UTCHi there, So, this MKIII Dome is more for a static version, where the pies and panels do not open right? or are the panels on a easy to remove way?
2022-09-04 21:26:01 +0000 UTCHallo Leute weis jemant wo ich die Baublähne für denn r2d2 ich brauche denn inneren teil vom r2d2
2022-02-11 16:04:58 +0000 UTCHi, Is there a version of this MK3 single print with the panels separate? Or have I missed something here?
2022-01-30 14:11:42 +0000 UTChiya joe im new to trying to print astromechs, would love to know what printer you end up getting and how it went with your build.
2021-09-17 18:22:12 +0000 UTCWhere are these files published?
2021-06-15 14:56:46 +0000 UTCJust curios, what print is everybody using for the 500mm build volume. I was looking at the the Creality CR-10 S5, any recommendations.
2021-02-19 22:11:37 +0000 UTCIt works fine, it’s been printed literally hundreds of times. Basically it prints to a tighter and tighter overhang, then shifts to bridging. Whilst the top underneath isn’t perfect, the outer skin and model prints without issue.
Michael Baddeley
2020-11-02 13:14:12 +0000 UTC
