Frostmetal Clan - January '21
Added 2021-01-02 18:36:40 +0000 UTCThis Set is from a previous month, but you can still Buy the STL in our Shop.
- We release Patron's Only DISCOUNT CODES each month, they are active from day 1 to 10 each month! Check our last release or poll.
LORE AND PICTURES
Following an ancient pact with Duum, the God of Ferocity and War, this powerful Orc clan became immortal.
At the price of protecting the temple of Ferocity amid the frozen peaks of Skutagaard, the damned Orcs and Ogres of the Frostmetal clan have gained exceptional control of the Necromantic Arts, making them among the most dangerous warriors in the Frozen Lands.
The Orcs and Ogres of the Frostmetal Clan boast excellent black metal armor with reinforced bones; their Frostbite weapons are instruments of death made of eternal ice and pure ferocity.
The oldest Frostmetals fight relentlessly seeking heroic death in battle.
Kentargh Grotar
He himself made a pact with the God of War, ambitious to gain immortality and increase his power. He was given Helsword, an insatiable cursed blade capable of controlling the armies of the dead.
Gothrak Doomfist
Last Warlord of Frostmetal, Gothrak protects Skutagaard's peaks from any invaders, charging head-on with his mighty ice hammer. He and his ogres are the most brutal and powerful members of the clan.
Logranna Helforge
A tenacious blacksmith and warrior, Logranna grew up with a forge and a runic hammer that once belonged to a Dwarven Artisan lord. Pouring all his ferocity into each of his creations, Logranna crafted each of the enchanted Frostbite Blades and Axes employed by the clan.
Armored Frosthorn
The mighty Frosthorn is Skutagaard's most dangerous mammal, a towering mass of muscle and fur capable of breaking through the walls of a fortress.
Worg Riders
Frostmetal Worgs are ferocious strong and fast. In order to form an otherwise impossible bond, Orcs receive a Worg Cub at an early age and train him hard for years.
Frostdoom Shrine
The ancient tales says that this shrine cursed by Duum, carved from the bones of a twisted Titan, is capable of rising the skeletons of who brutally fall in battle in its surroundings. It is here that Kentargh's Helsword has been forged.
WELCOME BOX AND GUILDS (game)!
A quick reminder that our Welcome Box is always available for our patrons! The Welcome Box will get supports as soon as possible, we are first supporting our previous releases.
On another hand, we recently launched the Open Beta for our skirmish game GUILDS!
If you are interested, just take a look and download the PDFs here.
Guilds Open Alpha is a bonus for our dear patrons, play it with your friends, but please don't sell/share the rules.
GUILD MEMBERS DISCOUNT CODES
- ARTISANCOLLECTION -30% on all our previous releases 1 to 10 each month. We are slowly completing a collection of Complete & Supported Bundles.
- WHOISTHEBOSS? -50% on every Epic Boss released so far!
Need Help? Join our Discord!
If you have any kind of trouble or feedback about Pre-Supported files, don't exitate to tag @Sephiroa, @Omn0mm and @Risc66 in the pre-supported channel in our Discord. They will gladly help you, and that platform is much better than this comment section to solve these kind of issues :)
We are using Lychee Slicer as it's more efficient, we really love it!
In any case, Lychee allows you to edit supports and export again as STL to slice in chitubox.
We wish you again a Happy New Year, thank you for your amazing support!
Cheers!
Andrea & Francesca
Comments
I just signed up on 2-28-21 for the February set cant download it ?
BluSkyOne1
2021-03-01 03:51:05 +0000 UTCAny models that are released prior to the month you joined are available in MyMiniFactory for a cost. Januarys models can be found here: https://www.myminifactory.com/object/3d-print-complete-frostmetal-clan-presupported-152100
Terry Hill
2021-02-28 23:06:19 +0000 UTCI just joined yesterday but their feed says we can still get the January files....how do we do that? I can't find anything.
David Dobbs
2021-02-28 21:53:50 +0000 UTCI think it was here at some point but seems to have vanished
Haunting Hyena
2021-02-28 03:46:48 +0000 UTCThank you.
Raymond Tanner
2021-02-26 23:04:16 +0000 UTCI can't find it here - but I found it through the discord channel - https://www.patreon.com/posts/oldburg-fallen-46928926
Chris Tindall
2021-02-25 08:28:42 +0000 UTCBut there's no February showing up here, at least not for me. But I found the link through the discord channel... https://www.patreon.com/posts/oldburg-fallen-46928926
Chris Tindall
2021-02-25 08:28:24 +0000 UTCI’ve tried using the link to get February release, but it’s not working. I’m getting no response from Artisan Guild. (Also I’m brand new to Patreon)
Raymond Tanner
2021-02-23 18:23:39 +0000 UTCi never get emails i just come here and download it form the link above.
Glendon Anderson
2021-02-15 22:30:20 +0000 UTCI still have not gotten my email with download link even though I signed up several days ago.... is service always this bad ?
Collin Porter
2021-02-13 23:42:11 +0000 UTCi cant find this months discount code for older releases. any one know where to find it.
law Galt
2021-02-07 23:08:12 +0000 UTCi got the email but the Sync link is no longer available
BaseSteve
2021-02-01 14:21:02 +0000 UTCYou should have received an email from Patreon saying you received a message from Artisan Guild which will have the download link (one for Sync and one for MyAirBridge) and password in it.
Phillip Burris II
2021-02-01 02:54:49 +0000 UTCWhat happened? I just became a patreon to download them tonight because I saw how cool they are... it's still January, but they're not available?
BaseSteve
2021-02-01 02:23:47 +0000 UTCIt is Jan 31, why can't I download?
Zachary Brumbaugh
2021-02-01 02:06:24 +0000 UTCSame, Link is no longer available; however, it's still Jan...
Gareth Jones
2021-02-01 01:45:14 +0000 UTCI would also like to download it please.
DruelTheGamer
2021-02-01 01:21:13 +0000 UTCSame. I'd like to download this.
Bart Kelsey
2021-02-01 01:06:57 +0000 UTCodd, the link is gone, yet it is still January.
Incandescent Dragon Creations
2021-01-31 23:33:57 +0000 UTCcheck temp. most resin needs minim 20-25C to print, some even need 30C. slow down your lift speed to 60, and print an amerilabs town test. see if at 6s you get 3 1/2 rows of pillars and the space needle. if these are not formed, increase exposure by a second and try again. once you get 3 1/2 rows or more of the pillars and the space needle, you should be able to print it
Incandescent Dragon Creations
2021-01-31 23:30:35 +0000 UTCHi, has there been any updates to the files? Don't see an update log. Previously was mentioned that you guys are looking into the presup file for the frosthorn base to fit smaller printers?
Samyrwinds
2021-01-31 01:20:01 +0000 UTCAwesome release. What's the scale of your minis? 32mm? Because I'm usually upscaleing to 40mm
Philippe De Braekeleer
2021-01-30 10:00:24 +0000 UTClink don't work
rurk admin
2021-01-28 22:38:30 +0000 UTCAny news on the renders for these?
Mark Rønne
2021-01-28 11:44:29 +0000 UTCMan I just got out the front of my armored frosthorn, you guys killed it! This is already my favorite model you guys have done so far, I love it. It dethroned the Hydra I bought from you guys. So cool.
Vincent Howard
2021-01-28 08:30:24 +0000 UTCSame especially with this set. It is so oversized. I ended up buying a 4K printer as the 0.35 um pixel is 70% of the standard 0.50 um. Seems to be working much better.
MJJEPPER
2021-01-27 11:59:52 +0000 UTCI would love to see some of those orc skeletons released as a terrain pack.
David Snodgrass
2021-01-20 16:49:15 +0000 UTCHas anyone noticed the weird mesh on the anvil's runes (not the AG side, the other side)? The AG runes look appropriate and a good depth to print, but the runes on the other side look shallow, and with a weird mesh...like some autofix utility screwed up. I see this on the unsupported and pre-supported files.
Rob Leonard
2021-01-20 03:34:59 +0000 UTCthe deepwood alfar and amazon set seems to be missing from my mini factory, is there any chance of being able to purchase those? love the models!
Joshua Crowley
2021-01-20 00:07:56 +0000 UTCMy Frostmetal Skeletons failed. I mounted both pre-supported models on the Photon Zero. The supports printed, but the bodies failed. The lift speed is at 60mm/min w/ a 6 sec. exposure. Any thoughts?
Dominic Beaudrie
2021-01-19 15:06:46 +0000 UTCOpposite. You get the STL files and need to Slice them.
Dominic Beaudrie
2021-01-19 14:55:16 +0000 UTCThanks for this. Will try it.
Sdspecter
2021-01-18 23:15:25 +0000 UTCTry scaling the lys model in Lychee slicer, it will scale the model without changing the supports which may work better for you.
LordOOTFD
2021-01-18 21:40:05 +0000 UTCAndrea & Francesca, the Artisan Guild produces, in my opinion, some of the best, most detailed, and dynamic miniatures of all the artists for whom I am a patron. Please keep up the excellent work!
David Lyse
2021-01-18 01:13:00 +0000 UTCAny updates? Also, is there an update log for this month's files?
Samyrwinds
2021-01-17 09:12:56 +0000 UTCI had a minor fail with the cape, but only the cape. Otherwise it came out really nice for me (On a Sonic Mini 4k)
Robert Detmar
2021-01-15 05:32:30 +0000 UTCit was an error, thanks! file removed :)
Artisan Guild
2021-01-12 14:26:28 +0000 UTCScaled down supports fail a lot. Most the time I end up supporting them myself, due to me using them for my d&d game with a smaller size. Usually 80%.
Sdspecter
2021-01-11 17:45:25 +0000 UTCIs there anyway to get the great goblins from last month? It did say they would be avaliable for 2 months but i cant find a link for them?
Ian Martin
2021-01-10 13:24:21 +0000 UTCYep, printed successfully in the parts supplied. (LD-002H) Only failure I've had with the ones printed so far was a single shield where the delicate supports gave way and I had to reprint with some additional pins. Dumb question - did you reduce to 90% and re-support at that size or rescale the supported STL model to 90% ? I've done the latter before and the down-scaled supports weren't too good. [Edited to add - not with an Artisan Guild model btw, just a general comment on re-scaling existing supports.] :)
Martin Dickson
2021-01-10 03:38:16 +0000 UTCI printed out frost horn last night/today needed 3 prints due the size. First time was a total fail but it was more down to my settings i reduced the lift speed then had no issues. The supports are great and leave virtually no marks just getting the printer dialed in for them was a pain. I've printed about 5 build plates worth now with no issues.
Ian Martin
2021-01-09 21:16:21 +0000 UTCDid anyone has successfully printed the frosthorn? Mine got stucked on the tray because it i to heavy (reduced to 90% to fit) and the supports couldn't hold him.
Cream Skate
2021-01-09 13:21:44 +0000 UTCLos publican de repente, ahorita no se si todavía este la oferta del sitio con el 50% de descuento. ese código te lo dan ahi mismo en la pagina de myminifactory.com
Cream Skate
2021-01-09 13:17:06 +0000 UTCThanks for your reply. Guess i'll reduce speed from 40 to 30mm/min and give it another try.
MrWho
2021-01-09 09:38:25 +0000 UTCI did't get this bundle for the month of December
Vincent Clayton
2021-01-09 08:26:29 +0000 UTCI've now printed out a few of these and also dropped the lift speed and everything is coming out fine after these tweaks. However since they look so good and with the sale on MMF ive went and bought most of the other stuff aswell now. Dam you AG and your great mini's.
Ian Martin
2021-01-09 08:24:01 +0000 UTCHi i've printed worg A with no issues. I used the pre-supported files. I did have to turn the lift speed down a bit on my ones as the supports where failing but after reducing the lift speed they are all coming out great. I've not done C yet so i cant say on that one.
Ian Martin
2021-01-09 08:20:55 +0000 UTCNo entiendo. Cual es la clave para obtener descuentos en la pagina anexada?
Forge wandering
2021-01-08 19:06:20 +0000 UTCDoes somebody else have problem with the supported "Frostmetal Worg A" and "Frostmetal_Worg_C" ? Frostmetal Worg A: From 3 prints the lower yaw is either missing or mislocated and the tongue does not like to stay in one place = splitting up. Frostmetal Worg C: His tail tip is ripping of the supports - that one has a different support structure compared to Worg A&B - and gets reatached later with the tailbase.
MrWho
2021-01-08 06:13:47 +0000 UTCSo... this is a slicer file? A conversion from an .stl?
Enty
2021-01-07 06:21:34 +0000 UTC.pws files are used by Anycubic's Photon printers. If you don't have a Photon or Photon S there isn't much you can do with it, you'll need to export the STLs or Lychee files to a different format.
D. Raynes III
2021-01-06 18:04:38 +0000 UTCYeah I've got it sitting on a small step infront of the radiator now so the while printer gets warm along with the resin did another print today and no issues. The only issue I have now is looking at all the other sets and thinking hmm should I get more 🤔
Ian Martin
2021-01-06 17:22:14 +0000 UTCSeconded, (both living in Scotland and heating the resin). I also heat the build plate and find that it makes a difference too.
Tom Rolland
2021-01-06 16:35:14 +0000 UTCSorry to trouble, but I've got a new-to-me file type (.pws) in the Frostmetal Ogre F folder: Ogre_Marauder_F_(lady) + Mani Gino.pws I looked up the abbreviation, which comes from Corel Paint - but it doesn't open as either an image file or a printable file. Can someone give me a clue what I'm supposed to do with it? Thanks in advance :)
Enty
2021-01-06 07:11:57 +0000 UTCI upped the layer time by 0.25 I've got a mars 2 pro. I also heated the resin up a bit before I started I live in Scotland so its not the warmest at the minute. I did a second print and all went well.
Ian Martin
2021-01-06 05:17:51 +0000 UTCI had similar issues when I started last year. I had issues with pieces breaking mid-print and just not sticking. I won't say this is necessarily the problem, but it helped me out. What I did was increase the layer times on my printer. Obviously different printers and resins will require different settings from mine, but increasing the base layers by (I think it was) 2 seconds made a huge improvement on my prints succeeding. I do think I added a second to my regular layers too, but if the base didn't stick to the build plate this could help. Other than that maybe adding an extra support to the axe to improve its stability during printing?
Nathan Keene
2021-01-06 02:05:41 +0000 UTChi i'm new to the whole 3D printing and having some issues and looking for any advice.i just printed out the first ork rider and the worg and rider came out amazing but the axe failed along the shaft and the whole base failed pritty much straight away. Anyone have any tips my build plate is level i checked before the print.
Ian Martin
2021-01-05 17:05:23 +0000 UTCHey, did you have any issues with the pre-supported files failing on the left arm/cape? I have tried twice now with this model and failing in the same areas :(
Scott McRobert
2021-01-05 12:26:07 +0000 UTCgreat job this month guys i just printed doomfist and it’s so great it’s getting me back into 3d printing
Lane Davis
2021-01-05 06:11:46 +0000 UTCI've got a Photon Zero and fitting some of the larger minis is nearly impossible. I've swapped to 28mm scale because of this: everything I've tried fits when scaled down to 87.5%.
Rory of Ynn
2021-01-04 21:46:59 +0000 UTCThere are a few big presupported models that won't fit on my Mars Pro base too. Hopefully with the adjustments they will fit there too.
Timothy Storey
2021-01-04 21:29:40 +0000 UTCNo worries at all! You guys do enough for us as it is. I just wanted to ask before I supported it. Thank you for the response and the awesome miniatures!
Montemore
2021-01-04 21:14:19 +0000 UTCHello Montemore :) We normally don't support the standalone weapons as they are meant for digital kitbashing (for example by inserting into other releases hands), sorry!
Artisan Guild
2021-01-04 21:12:27 +0000 UTCThanks! We are looking into it :)
Artisan Guild
2021-01-04 21:11:25 +0000 UTCAwesome stuff! Trying to print the frost horn now, but noticed the presup base doesn't fit the sonic mini plate - possible to have it slightly adjusted?
Samyrwinds
2021-01-04 03:32:32 +0000 UTCWas there a pre-supported version of the stand alone weapons? I may have missed it. If not I can support them myself but if there was one it would save time. Great set by the way, I am excited to get back into painting!
Montemore
2021-01-03 22:04:59 +0000 UTCDownloading now, love MyAirBridge so much more than Sync! No wonder you folks prefer Orcs and Ogres (and Dwarves) over the other races, you are masters at creating them! Considering how well your Zeek's turn out as well, I stand by my preference to one day see an AG Thri-kreen set someday so I can add them to my list of baddies for my FFXI themed campaign. Followed by an AG Tortle set :)
James Harrison
2021-01-03 19:01:04 +0000 UTCMaybe a zombie/skeleton version of each race AG has done so far.
James Harrison
2021-01-03 18:53:27 +0000 UTCHi L.G, I'm not sure of the reduction scale for these models, however, I use the free Sid Scale set of miniatures from Printable Scenery to check the scale on my slicer. The set comes with 7 minis scaled from 50mm down to 10mm and even has a set for Flames of war. I scale all my stuff down for D&D and SID works a treat. You can also change his height for heroic scale. Good luck!
Jimmy Trinket
2021-01-03 13:09:17 +0000 UTCHoly heck, these look amazing! Thanks AG!!! And also really looking forward to the undead series, the skellys in this release look terrifyingly good.
Jimmy Trinket
2021-01-03 12:56:26 +0000 UTCLove your work.. more baddies to come
Garry Rutherfurd
2021-01-03 11:57:39 +0000 UTCSo effing happy to see the FrostmetalClan released. Imho your best release so far. Great start into 2021. Thank you!
Markus Jorissen
2021-01-03 10:24:19 +0000 UTCThank you and awesome minis
Local .Guide
2021-01-03 09:52:47 +0000 UTCdoes anyone know the scale reduction for every model to fit into a normal 25-30mm base. I mean, just printed the big orc and its huge. Id like to have it scaled to a simple size, like an infantry unit.
Local .Guide
2021-01-03 09:52:26 +0000 UTCSo excited for this! I'm looking forward to Guilds more as well, can't wait to learn more about that and test-drive it
LP Wilson
2021-01-03 01:37:42 +0000 UTCAlso, I’d love to see zombie trolls or any kind of fantasy race undead
Angel Sainz
2021-01-02 22:30:29 +0000 UTCExcited to see what you do for undead mounts
Angel Sainz
2021-01-02 22:29:48 +0000 UTCUndead?! I'm so excited! I was just thinking about how badly I wanted a set of AG skeletons!
Leland Stephens
2021-01-02 20:11:06 +0000 UTCI’m so pumped for these; the pinup in particular is a freaking badass!
Paul Goodwin
2021-01-02 20:10:57 +0000 UTCLooking forward to an undead release finally, especially after seeing the skeletons from this month's release.
Victor Laurence
2021-01-02 19:48:29 +0000 UTCGreat Minis and I love that you have us another alternative for the download. I just wrote to you due to problems I had with the welcome package
Sascha Hübsch
2021-01-02 19:17:39 +0000 UTCSuperHot
Fumocat
2021-01-02 19:13:43 +0000 UTCBaddAss!! Love everything in this set...super job AG!
Rob Leonard
2021-01-02 18:59:17 +0000 UTCFantastic, excited about the undead
Stephen Rumer
2021-01-02 18:56:48 +0000 UTCHell yeah!! Awesome models! Love literally ALL of them!
Adam
2021-01-02 18:49:43 +0000 UTCExcited for this one!
MGSPainting Services
2021-01-02 18:42:33 +0000 UTC
