Mañolo

Persephone Zero Early Access | CAD Files

Early access to my newest, super small VR headset

• Display - aliexpress.com/item/32975188929.html 2025-10-14 18:06:35 +0000 UTC View Post

VR Headband 1.2 | STL Files

Fully 3D printed headband for VR headsets

• Prints fully in PLA

• Individual chambers for each strap

• Straps are flexible even when printed in PLA

2025-10-12 17:30:26 +0000 UTC View Post

VR Headband 1.2 | CAD Files

Fully 3D printed headband for VR headsets

• Prints fully in PLA

• Individual chambers for each strap

• Straps are flexible even when printed in PLA

2025-10-12 17:28:45 +0000 UTC View Post

VR Headband 1.0 | STL Files

Fully 3D printed headband for VR headsets.

Use TPU for the straps. Everything else can be printed out in PLA

VR Headband 1.0 | CAD Files

Fully 3D printed headband for VR headsets.

Use TPU for the straps. Everything else can be printed out in PLA

Persephone VR Controller | DiY SteamVR 6DoF Controller

Persephone VR Controller 1.01 PCB | Gerber Files

Gerber files for the Persephone VR Controller 1.01 PCB

I've designed both boards as a one package for easier and cheaper order but you have to separate them manually later on.

Persephone VR Controller 1.0 | STL Files

My very first, wand-like controller inspired by Quest controllers.

It works with HadesVR. Fully compatible with SteamVR with 6DoF.

Persephone VR Controller 1.0 | CAD Files

My very first, wand-like controller inspired by Quest controllers.

It works with HadesVR. Fully compatible with SteamVR with 6DoF.

Tiny Gyroscope | Gerber Files

My super-tiny gyroscope board.

Works with MPU6500 and MPU9250. Propably works with other chips if the footprint is the same.

It uses all of the components from typical MPU board.

...

Persephone Zero VR Headset coming soon

I'm almost finished with my newest, super slim VR headset.

It's as small as bigscreen beyond and features pseuro-pancake lense setup.

I've also designed a small pseudo-ping-pong LED di...

Vive Tracker Constellation Points

Vive tracker constellation points.

Those are basically coordinates of the vive tracker lighthouse sensors.

Measured in meters. Based on the original Valve JSON file.

Yellow orbs m...

Persephone 3 Mipi Connector Board 1.0 | Gerber Files

Angled display connector board for my Persephone 3.

This way you won't break the display ribbon cables while making my headset.

Designed for f͟i͟x͟e͟d͟ IPD

Not tested yet

LS029B3SX02-D Mipi Connector PCB 1.0 | Gerber Files

LS029B3SX02-D Mipi Connector PCB v1.0

As close to the original as possible

LS029B3SX02-D Mipi Connector PCB Layer Scans

Layer scans of the original LS029B3SX02-D Mipi Connector PCB

HadesVR Remix Wand 1.1 | Gerber files

Gerber files for the HadesVR Remix Wand controller version 1.1

HadesVR Remix Wand 1.1 Case | STL Files

Full set of plastic parts for the HadesVR Remix Wand controller.

Works with PCB version 1.1

HadesVR Remix Wand 1.1 Case | CAD Files

Full set of plastic parts for the HadesVR Remix Wand controller.

Works with PCB version 1.1

Persephone 3 Lite | DiY SteamVR Headset

Persephone 3 Lite 1.0 | STL Files

Version 1.0 of my latest Persephone 3 headset.

This is a "lite" version which means it uses Raspberry Pi Pico and MPU for SteamVR support.

You can also add a RGB ping pong for full 6DoF...

Persephone 3 Lite 1.0 | CAD Files

Version 1.0 of my latest Persephone 3 headset.

This is a "lite" version which means it uses Raspberry Pi Pico and MPU for SteamVR support.

You can also add a RGB ping pong for full 6DoF...

P3L

Persephone 2.3 | DiY Pseudo-Pancake Update

Persephone 2.3 | STL Files

Simple fresnel lense update for Persephone 2.

It has way bigger FOV compared to previous lenses.

Wors with trimmed 70mm fresnel lenses with 40mm focal lenght

Persephone 2.3 | CAD Files

Simple fresnel lense update for Persephone 2.

It has way bigger FOV compared to previous lenses.

Wors with trimmed 70mm fresnel lenses with 40mm focal lenght

Sideloader 3.1 | STL Files

I've added some much needed quality of life improvements :)

Sideloader 3.1 | CAD Files

I've added some much needed quality of life improvements :)

Sideloader 3.0 | DiY Augmented Reality

Sideloader 3.0 | STL Files

My newest Sideloader.

It uses 0.4" SON FLCoS Display with my DiY driver board.

Sideloader 3.0 | CAD Files

My newest Sideloader.

It uses 0.4" SON FLCoS Display with my DiY driver board.