My ECX version of the Sideloader. It works and you can see the image but I feel like that's not the correct approach.
It has built-in hardware mirroring which lets you see the image in proper...
2023-11-12 19:43:30 +0000 UTC View Post
My ECX version of the Sideloader. It works and you can see the image but I feel like that's not the correct approach.
It has built-in hardware mirroring which lets you see the image in proper...
2023-11-12 19:42:16 +0000 UTC View Post
My newest version of the ECX Engine.
ECX Engine is the DiY Holographic display which uses the FLCoS display and ECX optics module.
You can use this to make your own AR device.
ECX...
2023-11-05 20:20:58 +0000 UTC View Post
My newest version of the ECX Engine.
ECX Engine is the DiY Holographic display which uses the FLCoS display and ECX optics module.
You can use this to make your own AR device.
ECX...
2023-11-05 20:19:58 +0000 UTC View Post
Turns out that when you buy the FLCoS display from AliExpress, there are actually two (or more) display driver boards that can be sent to you.
I have no idea what’s been changed between tho...
2023-11-02 12:39:48 +0000 UTC View Post
My newest thing in the "Engine" collection.
This time it's a FLCoS + ECX optics combo which uses two combiner pieces (or 1 combiner and mirror) to show semi-transparent image in the real spac...
2023-11-02 09:07:33 +0000 UTC View Post
My newest thing in the "Engine" collection.
This time it's a FLCoS + ECX optics combo which uses two combiner pieces (or 1 combiner and mirror) to show semi-transparent image in the real spac...
2023-11-02 09:05:40 +0000 UTC View Post
Just a simple photo which will help you put the ECX333A magnifier back together.
1st on the left is on the bottom, 2nd goes on top of the 1st, 3rd on top of 2nd etc.
2023-11-01 18:21:24 +0000 UTC View Post
I've downloaded the original, newest Raspberry Pi OS image for the Raspberry Pi Zero and added some config parameters so that when you flash it on your SD card, it works with Sideloader straight aw...
2023-10-30 13:59:37 +0000 UTC View PostI've published some of my older stuff on my MakerWorld account.
Everyone can go and grab those without any charge.
I didn't want them to go into obscurity since I don't work on those an...
2023-10-27 16:12:37 +0000 UTC View Post
I was going to use a Plastation VR halo-styled head strap but I've guessed that people wouldn't like to buy used PSVR just to get the strap and use it with my project.
That's why I've been wo...
2023-10-20 18:06:47 +0000 UTC View Post
Latest version of the Onyx 1.5 PRO.
You can check it out right now.
2023-10-08 16:26:48 +0000 UTC View Post
This is my most recent prototype for the AR glasses.
This one is dual-screen.
It may look goofy but it's actually the most ergonomic and comfortable thing I've made.
2023-10-05 19:17:16 +0000 UTC View Post
I've fully dissasembled the optics module which comes with the new OLED micro display.
It was pretty big so I guessed it must've had more than two magnifying pieces but it turns out it has a ...
2023-10-04 14:53:40 +0000 UTC View Post
I've made some new prototype frames for my Onyx AR Glasses.
Those still use the same display as previous ones but this time I've uesd regular sunglasses lenses which make it way easier to see...
2023-10-03 17:44:41 +0000 UTC View Post
For Bambu Lab printers only.
It has the Pause GCode at lense height.
2023-09-30 16:04:34 +0000 UTC View Post
I've made simple diagram which shows you how to properly fold the Onyx AR flat cable.
I hope it will make things easier :)
2023-09-29 18:05:41 +0000 UTC View Post
I don’t think I can make it even thinner than Onyx 1.5 but I think I could make some other improvements 📷
2023-09-28 19:13:43 +0000 UTC View Post
I’ve finally bought new, micro display which I’ve been looking at for the past couple of months. This one comes without the driver board and I’ve bought it mostly for research.
I’m g...
2023-09-26 18:19:04 +0000 UTC View Post
My newest AR glasses. This is by far my best work yet.
I've made some brand new changes to all parts of the frame.
It now has detachable combiner module which makes it really easy to cu...
2023-09-20 20:35:59 +0000 UTC View Post
My newest AR glasses. This is by far my best work yet.
I've made some brand new changes to all parts of the frame.
It now has detachable combiner module which makes it really easy to cu...
2023-09-20 20:32:59 +0000 UTC View Post
My HDMI2AV converter clone.
It works. I've checked.
You can use the zip file to order this board for yourself.
2023-09-20 08:35:52 +0000 UTC View Post
My newest video connector board for my Onyx glasses.
You can upload the zip file to the PCB manufacturer of your choice and they will make one for you.
2023-09-19 17:31:03 +0000 UTC View Post
I've made it while re-designing the Onyx 1.5 frame.
It's a perfect fit when printed on my Bambu Lab P1S.
It even has screw holes for better mounting.
2023-09-14 18:02:43 +0000 UTC View Post
I've made it while re-designing the Onyx 1.5 frame.
It's a perfect fit when printed on my Bambu Lab P1S.
It even has screw holes for better mounting.
2023-09-14 18:01:33 +0000 UTC View Post
Simple schematic which shows you how to solder the 3.5mm connector for the Sideloader.
2023-09-14 16:12:37 +0000 UTC View Post
This is my "FLCoS Engine".
It works as a most basic FLCoS display enclosure.
It now has built-in focus adjustment screw which is really helpful when there are multiple users with differ...
2023-09-09 09:52:32 +0000 UTC View Post
This is my "FLCoS Engine".
It works as a most basic FLCoS display enclosure.
It now has built-in focus adjustment screw which is really helpful when there are multiple users with differ...
2023-09-09 09:51:23 +0000 UTC View Post
I've finally finished remaking the bigger HDMI2AV board.
Smaller one has still not been tested since I don't have the components.
You can essentially upload the zip file to the PCB manu...
2023-09-06 18:20:24 +0000 UTC View Post