Mark 2 Design

Hit & Run

I put together this Hit & Run custom for Assembly Required. Everything here (except the gun) was the first test print. I’m going to make one change to the bag but the rest is ready to go. Iâ€...

Custom Claymore

I made a custom Claymore figure based on the Special Mission Brazil Toys R Us exclusive from back in the day. I hit it off with his creator Michael C. Hill at JOELANTA a month ago and made this for...

Assembly Required

Code Name: IOWA is putting on the 2025 Assembly Required G.I.JOE Convention next weekend in Des Moines Iowa. I dont mind telling you that this is my single favorite G.I.JOE Con to go to. In additio...

Porkchop Express Deluxe .stl files

Here are the files for customizing your WWE Wrekkin Rampage Rig into the Porkchop Express as seen in the John Carpenter classic "Big Trouble in Little China". This is a bit more advanced than most...

A little Rock 'n Roll V2 Update

Progress has been made but its slow goin. Here are all the test prints assembled. Lots of tedious little tweaks to make but it wont be long now.

Porkchop Unveiling

I just returned from JOELANTA. I had a great time. Somehow Duluth/Northeast Atlanta managed to dodge the weather. A lot of other folks weren't so lucky.

I'll have these files up for you later...

This is why we test print....

Pictured is my updated exhaust stack for the Wrekkin Rig/Porkchop Express. The peg that snaps into the cab turned out to be about 3mm to low. I've made some adjustments and the next print will prob...

Porkchop Express Progress Pics

This is coming along nicely. I haven't had to reprint anything big yet. Thats a huge win in my book. I'm still nervous about how the frame extension will hold after I glue it. I considered running ...

WWE Wrekkin Rampage Rig / Porkchop Express

This back burner project got a little steam this week. After the Porkchop Express custom I finished back in Jan of 2023 I was a bit disappointed. Ultimately the Wrekkin Rig is a kids toy with propo...

Firefly Pack

I did this in May of last year. I had planned to sell them but found that the lid had a tendency to warp a little and I basically abandoned it. Could be I just over/unevenly cured them or didn't ge...

The files so far....

Hey folks!

I've compiled a list of the files available here on the Patreon. I wish Patreon handled this better but it is what it is. Thanks again for your support !

Ferret October 24 ...

NIGHTFORCE RAM Sidecar

Hey!

Just an FYI, I am finally posting the NIGHTFORCE RAM Sidecar on my Etsy store. It should be up in about 15 minutes if you are interested.

-Mark

Rock 'n Roll V2

Hey! Just a little sneak peak of one of my projects. I did a 3D design of Rock 'n Roll V2's Gatling guns/ammo pack/ammo belts very early on, early 2021 I think. I didn't have the original items in ...

The Cobra C.L.A.W.

Sorry for the delay on this one, things have been hectic around here with the end of summer and kids heading back to school.

I'm proud of this one. This was an evolution of design for me and...

Hollow Backpack .stl File

Attached is the hollow pack that I recommend for resin printing. The .stl for the peg was uploaded earlier.

Solid Pack .stl file for FDM Printers

Download the solid pack here.

Some of the files.....

Sooooo.... Patreon has a max file size for uploads of 200 MB. Even though my compressed folder with ALL the files is only 160,107 KB, Patreon wont accept the upload. It basically times out. Super f...

Real Talk

I have a big question for you. Which muzzle flashes do you prefer? The Action Force muzzle flashes from Valaverse (many of which I designed) or the G.I.JOE Classified muzzle flashes from Hasbro? Th...

Retro Shockwave Kit Update

     Test prints of the Shockwave kit turned out nice. I still want to print the peg plate in F69 but I think the files are probably ready for you. I'll do a solid pack aga...

Solid Bag.stl

Hey! I think it worked this time!

Bag.stl

I have submitted a trouble ticket with Patreon as it isn't letting me upload the Bag.stl file. I'll have it up as soon as I figure this out.

-Mark

Download Your Snow Serpent Backpack Here!!!

This is our first time working with decimated files. Roll.stl was almost a gig before I decimated it so it was necessary to bring that file size down drastically in order for me to upload it to Pat...

Status Update

A couple of you reminded me that I need to post the files for the Snow Serpent pack. I'm going to do my best to get that uploaded this afternoon. The long and the short of it is that because I scu...

About the bag.....

It turns out that there is a 200mb limit to what I can upload onto Patreon. The back pack is just above that after I zip it so I'm gonna have to decimate it down and then zip it. I will try to get ...

Snow Serpent (no bag)

STL files for the Snow Serpent gear, excluding backpack .

Snow Serpent

Hey everyone! It has been a rough month of troubleshooting my Elegoo Jupiter. Its a great machine but I have put some serious hours on this thing and I was afraid the LCD or UV light was reaching i...

Shockwave Bits and Pieces

Another highly requested "Retro-Gear Kit" that I am working on is for the G.I.JOE Classified Shockwave figure. The scale of the original accessories is a bit off. They all more or less work as is. ...

Snow Serpent Retro Gear Pack

Hey Everyone, I've been working on a couple of retro themed gear packs. I've had A LOT of requests for this one. I'll have prints available on the Etsy store when I restock on Monday the 22nd.

Podcast Tonight!

Howdy!

I'll be a guest with my friend Chris Scott of 2024-04-15 19:31:24 +0000 UTC View Post

LUBRICATE YOUR VAMP TURRET PARTS!

Its in the video but I wanted to make sure everyone understands, if you dont lubricate the working parts it will not function well.