Aitrepreneur : ULTIMATE ALL-IN-ONE FLUX WORKFLOW V3!

I keep getting memory allocation error everytime I run it once. First time its okay but after the first I keep getting errors and it doesn't give me the continuity

Ninja Pumpkin

2025-06-05 20:15:20 +0000 UTC

Hey I'd like to know if there is an FAQ to using this, I am trying to run it but it just says no prompt etc. Where do we start begin etc?

Ninja Pumpkin

2025-06-05 15:54:15 +0000 UTC

dm me screenshots of the whole parameters before generation

Aitrepreneur

2025-05-29 21:47:32 +0000 UTC

I am getting the error: Prompt outputs failed validation BasicGuider: - Required input is missing: model. This is in the FP8 REDUX + PULID section. All the models are in the drop downs so not sure what's happening here.

chucka

2025-05-29 11:36:27 +0000 UTC

this means your prompt is too long AND that you don't have enough vram to do the operation, download a smaller model

Aitrepreneur

2025-05-26 18:13:26 +0000 UTC

what a mess: I deleted everything and ran the latest 'M' bat installer. It all seemed to go without a hitch. trying to just render the default text to image: Token indices sequence length is longer than the specified maximum sequence length for this model (109 > 77). Running this sequence through the model will result in indexing errors FETCH ComfyRegistry Data: 35/86 Requested to load Flux FETCH ComfyRegistry Data: 40/86 0 models unloaded. loaded partially 128.0 127.94342041015625 0 0%| | 0/20 [00:00

Taiga

2025-05-26 15:05:14 +0000 UTC

maybe because you haven't activated the whole workflow and are using the preview area only?

Aitrepreneur

2025-05-09 11:44:06 +0000 UTC

The outpainting workkflow is creating a new image under the orinial one but it does not generate the extension of the original image, why do you think it could be that? Thanks

Isaac Timon

2025-05-09 05:53:49 +0000 UTC

to fix the missing custom nodes I just look for them in github and installed inside the ComfyUI/custom_nodes dir, this was the nodes I have missing cd ComfyUI/custom_nodes/ git clone ComfyUI-PuLID-Flux https://github.com/balazik/ComfyUI-PuLID-Flux.git git clone ComfyUI-Florence2 https://github.com/kijai/ComfyUI-Florence2.git git clone x-flux-comfyui https://github.com/XLabs-AI/x-flux-comfyui.git git clone ComfyUI-Impact-Pack https://github.com/ltdrdata/ComfyUI-Impact-Pack.git git clone ComfyUI-Long-CLIP https://github.com/SeaArtLab/ComfyUI-Long-CLIP.git git clone ComfyUI_JPS-Nodes https://github.com/JPS-GER/ComfyUI_JPS-Nodes git clone ComfyUI_essentials https://github.com/cubiq/ComfyUI_essentials git clone ComfyUI-Impact-Subpack https://github.com/ltdrdata/ComfyUI-Impact-Subpack git clone comfyui-various https://github.com/jamesWalker55/comfyui-various.git git clone ComfyUI-LTXVideo https://github.com/Lightricks/ComfyUI-LTXVide git clone cg-use-everywhere https://github.com/chrisgoringe/cg-use-everywhere.git

robertobeer00

2025-05-08 15:45:17 +0000 UTC

3 weeks later, no update, no help, no response, unsubscription, bye

Max Pro

2025-04-30 14:06:44 +0000 UTC

Still missing a lot of the custom node types, even after making everything else work. Had to manually install compatible versions of albucore and albumentations, have all of the needed models and custom nodes, but comfyui still can't recognize these custom node types. Do you have a repo that has these, so we can just add them to the custom_nodes folder? workflowFlorence workflowFlux Controlnet workflowNodes 3 workflowXLabs Sampler workflowAdetailer workflowoutpaintflor workflowfaceswap2 workflowfaceswap3 workflowREACTORFACESWAP workflowpullflo workflowpulidtxt workflowpluidlux workflowfillparam workflowPULIDREDUX workflowREDUXOTHERPARAM workflowshaker workflowLiveparam workflowLIVEPORTRAITIMGPARAM workflowLIVEPORTRAITVID2VIDPARAM workflowLTXPARAMTEXTOVIDGGUF workflowLTXPARAMTXTFP workflowLTXIMAGETOV workflowhuynyav2vparm Same for me , fresh install , follow all step , but that bug help plz

Max Pro

2025-04-10 09:46:33 +0000 UTC

Thank you for this great workflow! I am currently trying to swap faces, but the results look more like a merge, than a swap. Are there any parameters I can tweak?

Onex Sys

2025-04-06 16:26:20 +0000 UTC

Still missing a lot of the custom node types, even after making everything else work. Had to manually install compatible versions of albucore and albumentations, have all of the needed models and custom nodes, but comfyui still can't recognize these custom node types. Do you have a repo that has these, so we can just add them to the custom_nodes folder? workflowFlorence workflowFlux Controlnet workflowNodes 3 workflowXLabs Sampler workflowAdetailer workflowoutpaintflor workflowfaceswap2 workflowfaceswap3 workflowREACTORFACESWAP workflowpullflo workflowpulidtxt workflowpluidlux workflowfillparam workflowPULIDREDUX workflowREDUXOTHERPARAM workflowshaker workflowLiveparam workflowLIVEPORTRAITIMGPARAM workflowLIVEPORTRAITVID2VIDPARAM workflowLTXPARAMTEXTOVIDGGUF workflowLTXPARAMTXTFP workflowLTXIMAGETOV workflowhuynyav2vparm

Nunya Bidness

2025-04-02 01:31:07 +0000 UTC

Hey man, great work with this workflow, thanks for your work. Some improvements suggestions: - Img to Img resize the image. In my case from 1440x2240 to 816x1272. It should keep the same dimensions. - I feel like your Inpaint sections miss a ImageCompositeMask node. When you inpaint, even the zone you don't mask suffer small degradations. https://www.reddit.com/r/StableDiffusion/comments/1gy87u4/this_looks_like_an_epidemic_of_bad_workflows/ - For any "modification" section (inpaint, img2img, ...) you should add the image comparer you already put in new inpainting for example

Filke

2025-03-25 12:57:04 +0000 UTC

Is there any way I can recover from "Failed to download model-00002-of-00004.safetensors." without starting over? This is like the fourth time now... :(

John Cabrer

2025-03-25 02:15:51 +0000 UTC

Hi there! I have some trouble with this during im trying make an faceswap. [ReActor] 08:29:16 - STATUS - NSFW content detected, skipping... [Impact Subpack] Your torch version is outdated, and security features cannot be applied properly. This is sad, cause it even didnt that dirty as is write here. This happened with regular bikini picture. But in any case, don't I run all this on my own so that I don't have to deal with it? :\

Albert Ulitin

2025-03-23 08:33:36 +0000 UTC

I have hit a little issue, maybe someone has found the solution, i so far have not. So i put the V3 on my hard drive and everything otherwise looks good, but it seems like something is messing up the queue. Because it is just not working when pressing it. V1 works fine, but V3 the Queue is just not working and therefor cannot make any images or whatever else. Any ideas/solutions ? ((CMD does not show any errors or issues ))

SUTY THE REAL

2025-03-21 17:16:48 +0000 UTC

the installation literally take 232gb oof

Rluu

2025-03-21 13:21:30 +0000 UTC

I am still missing nodes workflow>Florence ReActorFaceBoost (In group node 'workflow>REACTORFACESWAP') workflow>REACTORFACESWAP ReActorFaceSwap (In group node 'workflow>REACTORFACESWAP') ReActorMaskHelper (In group node 'workflow>REACTORFACESWAP') workflow>outpaintflor workflow>faceswap2 workflow>faceswap3 PulidFluxInsightFaceLoader (In group node 'workflow>pluidlux') workflow>pluidlux PulidFluxEvaClipLoader (In group node 'workflow>pluidlux') PulidFluxModelLoader (In group node 'workflow>pluidlux') ApplyPulidFlux (In group node 'workflow>pluidlux') workflow>PULIDREDUX LivePortraitCropper (In group node 'workflow>LIVEPORTRAITIMGPARAM') workflow>LIVEPORTRAITIMGPARAM LivePortraitProcess (In group node 'workflow>LIVEPORTRAITIMGPARAM') LivePortraitComposite (In group node 'workflow>LIVEPORTRAITIMGPARAM') workflow>LIVEPORTRAITVID2VIDPARAM LivePortraitLoadCropper DownloadAndLoadLivePortraitModels LivePortraitLoadMediaPipeCropper Text Multiline

Stephen Murray

2025-03-20 16:56:35 +0000 UTC

yep. me too.. my videos had some strange distortion so I decided to fix it.,.. well I managed to break everything and then fix some, but now I have this situation with: 0.0 seconds (IMPORT FAILED): F:\AI_tools\COMFYUI\ComfyUI_windows_portable\ComfyUI\custom_nodes\comfyui-reactor-node3 0.0 seconds (IMPORT FAILED): F:\AI_tools\COMFYUI\ComfyUI_windows_portable\ComfyUI\custom_nodes\comfyui_pulid_flux_ll 0.0 seconds (IMPORT FAILED): F:\AI_tools\COMFYUI\ComfyUI_windows_portable\ComfyUI\custom_nodes\comfyui-reactor-node 0.0 seconds (IMPORT FAILED): F:\AI_tools\COMFYUI\ComfyUI_windows_portable\ComfyUI\custom_nodes\comfyui-reactor 0.0 seconds (IMPORT FAILED): F:\AI_tools\COMFYUI\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-PuLID-Flux

Janne Kallio

2025-03-18 17:46:13 +0000 UTC

im missing the "workflowpluidlux" (yes seems to be spelled 'plu' in your workflow) and workflowpulidtxt nodes and 'find missing nodes' doesnt pull them up and also searching for their names in custom nodes manager doesnt work. Where can I find these nodes? Its part of the pulid fp8 workflow

Wonder

2025-03-16 05:05:37 +0000 UTC

Sorry man, I stopped your cute installer after it downloaded 132GB of data and still hasn't finished. Just to generate some images using a local model there are lots of other 1 click installers which download less than 30GB and work fully fine with controlnet and face swap etc. Good luck.

Pelu

2025-03-15 23:13:29 +0000 UTC

an update for anyone reading/with solutions - the workflow is working, the navigation is not. If I queue something the workflow refreshes and so I can navigate it by dragging and then clicking queue to see the newly dragged position. So the issue seems to be with the ComfyUI not responding in realtime, or moving invisibly and only showing it's current state when something is queued.

Cheg

2025-03-14 09:56:59 +0000 UTC

I'm thinking a fresh install is needed as potentially updating comfyui has caused this. I'll report back

Cheg

2025-03-12 19:31:40 +0000 UTC

Hi, everything was working well until a few days ago and now I am unable to navigate in comfui. I can't click and drag the workflow to move it, nor can I zoom in and out/fit screen with the shortcut keys on the side. I've tried dragging and dropping json files in, refreshing, updating everything possible, clearing cache and alternate browsers, but nothing is fixing it! Have you ever seen this bug before? Weirdly I can add things to queue and change inputs in the nodes, but only the ones visible on the screen.

Cheg

2025-03-12 19:28:25 +0000 UTC

The same

琦王

2025-03-12 04:22:39 +0000 UTC

the same

琦王

2025-03-12 04:22:13 +0000 UTC

Why is it that I get the same woman every time I run the workflow regardless of my text prompt. I’ve actually added the Flux prompt generator node as well, and connected it to the prompt box to feed it a prompt based on my selections. However, it’s still ignoring them, and choosing the same woman all the time.

Jamie Gammon

2025-03-11 15:01:20 +0000 UTC

Hi. Getting the same errors, so I'm doubling on the question on what we need to do to get this to work!

Clayton Jackson

2025-03-10 17:48:24 +0000 UTC

I was using the outdated V2 Ultimate Flux model. After I deleted everything and reinstalled ComfyUI using the V3-ULTIMATE_FLUX-COMFYUI-MANAGER_AUTO_INSTALL-UPDATED.bat file, I got things to work after following Aitrepreneur's guide.

Otaku_Hedgehog

2025-03-10 04:32:44 +0000 UTC

any solution?

real69haha

2025-03-10 03:47:52 +0000 UTC

There are many missing custom nodes, even after installing all missing custom nodes and redropping the json. Im using Pinokio: Missing Node Types When loading the graph, the following node types were not found DownloadAndLoadFlorence2Model (In group node 'workflow>Florence') workflow>Florence Florence2Run (In group node 'workflow>Florence') LoadFluxControlNet (In group node 'workflow>Flux Controlnet') workflow>Flux Controlnet ApplyFluxControlNet (In group node 'workflow>Flux Controlnet') XlabsSampler (In group node 'workflow>XLabs Sampler') workflow>XLabs Sampler ImpactGaussianBlurMask (In group node 'workflow>Nodes 3') workflow>Nodes 3 ReActorFaceBoost (In group node 'workflow>REACTORFACESWAP') workflow>REACTORFACESWAP ReActorFaceSwap (In group node 'workflow>REACTORFACESWAP') ReActorMaskHelper (In group node 'workflow>REACTORFACESWAP') SAMLoader (In group node 'workflow>Adetailer') workflow>Adetailer UltralyticsDetectorProvider (In group node 'workflow>Adetailer') FaceDetailer (In group node 'workflow>Adetailer') workflow>outpaintflor workflow>faceswap2 workflow>faceswap3 workflow>pullflo LongCLIPTextEncodeFlux (In group node 'workflow>pulidtxt') workflow>pulidtxt Text Concatenate (JPS) (In group node 'workflow>pulidtxt') PulidFluxInsightFaceLoader (In group node 'workflow>pluidlux') workflow>pluidlux PulidFluxEvaClipLoader (In group node 'workflow>pluidlux') PulidFluxModelLoader (In group node 'workflow>pluidlux') ApplyPulidFlux (In group node 'workflow>pluidlux') workflow>PULIDREDUX Anything Everywhere (In group node 'workflow>REDUXOTHERPARAM') workflow>REDUXOTHERPARAM JWFloatSub (In group node 'workflow>Liveparam') workflow>Liveparam LTXAttnOverride (In group node 'workflow>LTXPARAMTEXTOVIDGGUF') workflow>LTXPARAMTEXTOVIDGGUF ModifyLTXModel (In group node 'workflow>LTXPARAMTEXTOVIDGGUF') LTXPerturbedAttention (In group node 'workflow>LTXPARAMTEXTOVIDGGUF') workflow>LTXPARAMTXTFP workflow>LTXIMAGETOV

SilentMonk

2025-03-09 20:47:31 +0000 UTC

send me a dm and some screens

Aitrepreneur

2025-03-09 01:00:03 +0000 UTC

Some help please. I tried the outpainting for the first time. Nothing happens. I expanded the image as you did in the video. But after doing that and going up to the outpaint section. Putting a prompt, clicking queue. Nothing happens.

Zoran Kanti-Paul

2025-03-08 07:13:01 +0000 UTC

Please Help - Having problems loading the WAS Node Suite - apparently it's for numpy ver 2.1 - I did a complete fresh install via the batch file and have numpy 2.2. I have tried to uninstall numpy numerous times and tried to pip install numpy--2.1.0 but it says the version isn't available, although it is via the numpy site. It continually fails to update via comfyUi manager as the numpy version is too 'new' - I don't know what else to try, please help.

andelalune

2025-03-05 06:54:31 +0000 UTC

Do I have to reinstall after that?

Taiga

2025-03-02 04:42:56 +0000 UTC

This helped me a lot, Portable Python environmental path was going to my appdata, to avoid this do this: Go to -> "start" and type "Manage App Execution Aliases". Go to it and turn off "Python"

Jason Blake

2025-02-28 06:47:55 +0000 UTC

watch the troubleshooting video if this is your first time: https://www.patreon.com/posts/exclusive-video-116007628

Aitrepreneur

2025-02-26 22:46:44 +0000 UTC

Installed with the BAT file, but for life of me can't get the workflow working. Just getting Nodes missing errors. I try to install everything with the Manager install missing nodes feature. But after every restart, just more missing node errors. Tried to run some stuff but just nothing happens. a Tutorial video would be awesome, where it starts with installing the BAT file then goes all the way to get up and running with the workflow.

Spoff Ninja

2025-02-25 18:21:59 +0000 UTC

hi friend, in live portrait v3, in result, in output video i get a vidéo without sound, and also it is accelerated video, how to fix this please?

BOB

2025-02-23 14:13:14 +0000 UTC

There is a ComfyUI problem with the UltimateSDUpscale node crippling your v3 workflow. (In just the one portion anyway.) I have been scouring posts in other places for a fix. Is it possible you've encountered the problem? Or maybe you replace it with another upscaler that works?

Metryman55

2025-02-20 03:23:17 +0000 UTC

Turns out its because my GPU wasn't fast enough. when I run the comfyui in CPU only mode it will load but of course VERY slow

TheInternalNetwork

2025-02-18 10:16:43 +0000 UTC

I also get the following long error message when I try to use either of the HUNYUAN TEXT TO VIDEO Options: "Prompt outputs failed validation DualCLIPLoader: - Value not in list: clip_name2: 'llava_llama3_fp8_scaled.safetensors' not in ['ViT-L-14-TEXT-detail-improved-hiT-GmP-TE-only-HF.safetensors', 'clip_l.safetensors', 'longclip-L.pt', 't5xxl_fp16.safetensors', 't5xxl_fp8_e4m3fn.safetensors'] UNETLoader: - Value not in list: unet_name: 'hunyuan_video_FastVideo_720_fp8_e4m3fn.safetensors' not in ['flux1-dev-fp8.safetensors'] DualCLIPLoader: - Value not in list: clip_name2: 'llava_llama3_fp8_scaled.safetensors' not in ['ViT-L-14-TEXT-detail-improved-hiT-GmP-TE-only-HF.safetensors', 'clip_l.safetensors', 'longclip-L.pt', 't5xxl_fp16.safetensors', 't5xxl_fp8_e4m3fn.safetensors'] VHS_LoadVideo: - Custom validation failed for node: video - Invalid video file: d6_trim.mp4 - Custom validation failed for node: force_rate - Invalid video file: d6_trim.mp4 - Custom validation failed for node: custom_width - Invalid video file: d6_trim.mp4 - Custom validation failed for node: custom_height - Invalid video file: d6_trim.mp4 - Custom validation failed for node: frame_load_cap - Invalid video file: d6_trim.mp4 - Custom validation failed for node: skip_first_frames - Invalid video file: d6_trim.mp4 - Custom validation failed for node: select_every_nth - Invalid video file: d6_trim.mp4 - Custom validation failed for node: format - Invalid video file: d6_trim.mp4 - Custom validation failed for node: unique_id - Invalid video file: d6_trim.mp4 UnetLoaderGGUF: - Value not in list: unet_name: 'fast-hunyuan-video-t2v-720p-Q8_0.gguf' not in ['flux1-dev-Q8_0.gguf', 'flux1-schnell-Q8_0.gguf'] VAELoader: - Value not in list: vae_name: 'hunyuan_video_vae_bf16.safetensors' not in ['ae.safetensors', 'ae.sft', 'clearvaeSD15_v23.safetensors', 'orangemix.vae.pt', 'sdxl_vae.safetensors', 'vae-ft-mse-840000-ema-pruned.safetensors', 'taesd', 'taesdxl', 'taesd3', 'taef1'] VAELoader: - Value not in list: vae_name: 'hunyuan_video_vae_bf16.safetensors' not in ['ae.safetensors', 'ae.sft', 'clearvaeSD15_v23.safetensors', 'orangemix.vae.pt', 'sdxl_vae.safetensors', 'vae-ft-mse-840000-ema-pruned.safetensors', 'taesd', 'taesdxl', 'taesd3', 'taef1']"

Otaku_Hedgehog

2025-02-16 04:04:23 +0000 UTC

At 17:49 in your video when I try to do the Liveportrait image to video segment, I get an error message that says 'ImageResizeKJ height and width must be > 0' What height and width is it referring to? I get this message even when I try to change the height and width of the uploaded video in comfyui.

Otaku_Hedgehog

2025-02-16 03:01:55 +0000 UTC

You said " It's changed the unet_name to undefined." In view of your red error message it probably means that the unet name always was undefined, at least in the sense that the value in the parameter box did not and does not actually exist in the appropriate folder. You can check that by manually going to that folder. If the file you're looking for isn't there, you can manually download it from github or if you have a spare hour or two you can try to reinstall the whole V3 workflow again using the one-click installer. If you keep finding that models are missing then a reinstall is probably the safest option.

LW

2025-02-15 18:03:51 +0000 UTC

If so, you could try copying all the relevant parameters from your old image to the V3 workflow. You can't just drag the image to the workspace as that will recreate your original workflow. However, you can feed your original image to an image-to-image workflow within V3. If you also copy the parameters to the i2i and keep the denoise very low, you will most likely recreate a very similar image. Is this what you want to do?

LW

2025-02-15 17:43:14 +0000 UTC

By "restore" do you mean have the workflow recreate the image?

LW

2025-02-15 17:36:49 +0000 UTC

Thanks @LW. Did that, but as a Comfy noob it drives my mind up the wall. I was in the GGUF Hunyuan Text to Video module and accidentally tried changing the UNET Loader GGUF as I was getting one of those annoying red errors for this. It's changed the unet_name to undefined. I've tried clicking on the left or right arrows (expecting options to be available - nothing of course), then tried right clicking and get lots of options, none of which make any sense and I don't want to break it further. Any help would be greatly appreciated as I'm only starting my Comfy journey.

James Stewart

2025-02-13 10:17:02 +0000 UTC

You may have checked this already, but.... check that the seed update is not on fixed. Use Increment or Random, otherwise if the seed has just been used and no other changes, the system just ignores the Queue instruction. No error message it just does nothing! ComfyUI devs should change that.

LW

2025-02-12 14:56:29 +0000 UTC

Is it possible to restore an old image in this workflow?

Claudinei

2025-02-12 02:07:17 +0000 UTC

I didn't really use the v1 and v2 workflow (or Comfy for that matter!) as I'd been waiting for a NSFW video option. Got v3 all installed and running. Went to GGUF Hunyuan text to video, updated prompt and clicked Queue - but nothing happens in the browser or the cmd.exe file. Thoughts on what's wrong?

James Stewart

2025-02-11 07:37:52 +0000 UTC

Can the main Comfyui folder be moved or will this break dpendencies?

Oliver Klimek

2025-02-10 20:05:41 +0000 UTC

I had the same issue. Go into the Node Manager, look for ComfyWorkflows and install it: https://github.com/thecooltechguy/ComfyUI-ComfyWorkflows

RadTechDad

2025-02-10 09:13:39 +0000 UTC

when I want to use the text to video of huan type A it gives me this error, how do I solve it? Mode B works instead "DownloadAndLoadHyVideoTextEncoder Failed to import transformers.models.timm_wrapper.configuration_timm_wrapper because of the following error (look up to see its traceback): cannot import name 'ImageNetInfo' from 'timm.data' (D:\Comfyui\ComfyUI_windows_portable\python_embeded\Lib\site-packages\timm\data\init.py)" "RuntimeError: Failed to import transformers.models.timm_wrapper.configuration_timm_wrapper because of the following error (look up to see its traceback): cannot import name 'ImageNetInfo' from 'timm.data' (D:\Comfyui\ComfyUI_windows_portable\python_embeded\Lib\site-packages\timm\data\init.py)"

StickHatzy Art

2025-02-09 22:09:50 +0000 UTC

Did you manage to figure this out? I'm also missing all workflow nodes.

Imran Bukhari

2025-02-09 21:56:54 +0000 UTC

I will just say that everything actually works, I installed it according to the manual instructions. Yes, you need at least minimal knowledge of where to look for which models, what interacts with what, how to configure it. But it all loads quickly. Thank you for this workflow.

Vitaliy Lazorishinets

2025-02-07 23:13:48 +0000 UTC

I created a portrait of a model I really am happy with. I would like to put this same model into different poses. I used the openpose section and got a skeleton but how do I get my model to be used instead of it generating a completely new image?

Chris Christopher

2025-02-07 21:51:54 +0000 UTC

Hello, I don't understand anything. (I speak Spanish, I am using a translator.) By chance I saw your latest video, which is dubbed into Spanish, I wanted to download the program, so I paid the subscription. visual studio has been installed. I entered the manual at https://pastebin.com/NL8Z9QXa but I don't understand anything (even with a translator) What or how do I have to extract this? -Download and extract the ComfyUI portable version from: https://github.com/comfyanonymous/ComfyUI I went to that website, and there are many folders... none of them say "ComfyUI portable" so I already got lost in the first step... I've gone to watch your other videos to look for a tutorial, but everything is in English, with no option for Spanish subtitles. Please can you give me a step by step? thank you

Yo Yo

2025-02-07 21:04:04 +0000 UTC

Another example: * UnetLoaderGGUF 1795: - Value not in list: unet_name: 'ltx-video-2b-v0.9-Q8_0.gguf' not in ['flux1-dev-Q8_0.gguf']

TheInternalNetwork

2025-02-07 01:23:35 +0000 UTC

Here is an example of my last one: Failed to validate prompt for output 1935: * UnetLoaderGGUF 1967: - Value not in list: unet_name: 'fast-hunyuan-video-t2v-720p-Q8_0.gguf' not in ['flux1-dev-Q8_0.gguf']

TheInternalNetwork

2025-02-07 01:21:27 +0000 UTC

I keep getting errors of "missing models", I was able to get some of the simplier stuff working like the text to image, but other items are unable to see the models. I ran the script. I am running this locally on my ubuntu server. Just need some clarification on what I am missing? I look in all the model folders and they are full of items.

TheInternalNetwork

2025-02-07 01:20:58 +0000 UTC

Does anyone have a prompt they can share to get the lifelike photorealistic looking people? Everything I type in using the flux schnell model comes out as an illustration.

Chris Christopher

2025-02-07 01:18:31 +0000 UTC

Altrepreneur how do i fix? missing node types in the latest comfy. i tried adding them but yeah

Solitary Robot

2025-02-07 00:39:45 +0000 UTC

Thank you for this. This is amazing. :)

Joe Kim

2025-02-06 22:48:42 +0000 UTC

I have no "workflows" nodes they are in red. nothing works... :((

Ambrotos Aeternus

2025-02-06 19:37:46 +0000 UTC

I just want to make this more clear, as this may be the main reason why the installation fails. Steps to Fix the Installation: 1: Remove all existing Python versions!!! Completely uninstall any Python versions already installed on your system. Also, remove any lingering Python path references in the Windows system settings. (These should be gone after uninstallation, but it’s best to double-check.) 2: Disable Windows Defender temporarily I’m not sure if this is mentioned in the troubleshooting video—if it is, it's probably at the very beginning, where most people tend to skip ahead. Either way, I didn’t hear it explicitly mentioned. 3:Delete everything in the installation directory and reinstall from scratch Follow the official installation instructions carefully. oh, and by the way, great tool, works like a charm ... when it finally works ;)

HOD - 3D Model Studio

2025-02-06 18:53:59 +0000 UTC

Hey friends, am i blind or how do i use checkpoints with anything? like for example GGUF image generation.

Michael Wells

2025-02-06 05:51:55 +0000 UTC

Do you happen to have any experience with running a "serverless" Runpod instance? It seems like it could be great since you only get billed for GPU usage, but I'm struggling to figure it out.

pgmr185

2025-02-05 23:31:03 +0000 UTC

Solved my problem, Solution for anyone else having it: My main system has python version 3.10, however the ComfyUI embeded python is 3.12 so there was a semi-hidden version mismatch. https://codeberg.org/Gourieff/comfyui-reactor-node#troubleshooting Follow the instructions below, using the 3.12 package to manually install the wheel that was failing. For Windows users) If you still cannot build Insightface for some reasons or just don't want to install Visual Studio or VS C++ Build Tools - do the following: (ComfyUI Portable) From the root folder check the version of Python: run CMD and type python_embeded\python.exe -V Download prebuilt Insightface package for Python 3.10 or for Python 3.11 (if in the previous step you see 3.11) or for Python 3.12 (if in the previous step you see 3.12) and put into the stable-diffusion-webui (A1111 or SD.Next) root folder (where you have "webui-user.bat" file) or into ComfyUI root folder if you use ComfyUI Portable https://github.com/Gourieff/Assets/raw/main/Insightface/insightface-0.7.3-cp312-cp312-win_amd64.whl ... Then install Insightface: python_embeded\python.exe -m pip install insightface-0.7.3-cp312-cp312-win_amd64.whl (for 3.12) Enjoy!

Larry Boles

2025-02-05 15:57:43 +0000 UTC

How do i increase the length or time of the ltx image to video scene?

Brandon Waters

2025-02-05 15:03:16 +0000 UTC

Hi, can you provide a list of the recommended LLM models so l can check against what has been installed? Having errors such as Prompt outputs failed validation VAELoader: - Value not in list: vae_name: 'ae.safetensors' not in ['taesd', 'taesdxl', 'taesd3', 'taef1'] Thanks

Mal Rynne

2025-02-05 09:00:18 +0000 UTC

I'm trying to use the image fp8 image to video, but it doesn't generate an output. What do I need to to? * CheckpointLoaderSimple 1778: - Value not in list: ckpt_name: 'ltx-video-2b-v0.9-fp8_e4m3fn.safetensors' not in [] Output will be ignored

Nuutti Pikkarainen

2025-02-05 07:42:13 +0000 UTC

For whatever reason the cython package is choking on the space in "C:\Program Files" when it tries to install it. Anyone able to point me to the build script to check that its quoted? building 'insightface.thirdparty.face3d.mesh.cython.mesh_core_cython' extension [!] creating build\temp.win-amd64-cpython-312\Release\insightface\thirdparty\face3d\mesh\cython [!] "C:\Program Files (x86)\Microsoft Visual Studio\2022\BuildTools\VC\Tools\MSVC\14.42.34433\bin\HostX86\x64\cl.exe" /c /nologo /O2 /W3 /GL /DNDEBUG /MD -Iinsightface/thirdparty/face3d/mesh/cython -IS:\ComfyUI_windows_portable\python_embeded\Lib\site-packages\numpy\core\include -IS:\ComfyUI_windows_portable\python_embeded\include -IS:\ComfyUI_windows_portable\python_embeded\Include "-IC:\Program Files (x86)\Microsoft Visual Studio\2022\BuildTools\VC\Tools\MSVC\14.42.34433\include" "-IC:\Program Files (x86)\Microsoft Visual Studio\2022\BuildTools\VC\Auxiliary\VS\include" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.26100.0\ucrt" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.26100.0\\um" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.26100.0\\shared" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.26100.0\\winrt" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.26100.0\\cppwinrt" "-IC:\Program Files (x86)\Windows Kits\NETFXSDK\4.8\include\um" /EHsc /Tpinsightface/thirdparty/face3d/mesh/cython/mesh_core.cpp /Fobuild\temp.win-amd64-cpython-312\Release\insightface\thirdparty\face3d\mesh\cython\mesh_core.obj [!] cl : Command line warning D9024 : unrecognized source file type 'C:\Program', object file assumed [!] Failed to build insightface cl : Command line warning D9027 : source file 'C:\Program' ignored [!] cl : Command line warning D9024 : unrecognized source file type 'Files', object file assumed

Larry Boles

2025-02-05 06:13:44 +0000 UTC

Enjoy ;)

Aitrepreneur

2025-02-04 21:42:56 +0000 UTC

The current reactor repo (uncensored one) is here: https://codeberg.org/Gourieff/comfyui-reactor-node It will install automatically with the patreon installer

Aitrepreneur

2025-02-04 21:42:48 +0000 UTC

https://github.com/Gourieff/comfyui-reactor-node This repository has been disabled. i download it from here https://github.com/GraftingRayman/Comfyui-reactor-node

Turing App

2025-02-04 19:15:01 +0000 UTC

Fixed it by completely re-downloading Kijai/llava-llama-3-8b-text-encoder-tokenizer

Vitaliy Lazorishinets

2025-02-04 16:44:28 +0000 UTC

this worked for me.

Virtamouse

2025-02-04 15:56:24 +0000 UTC

I installed Ultimate V3 and WOW! First install didn't quite work, maybe due to me messing around with the folders. Reinstall over that kept crashing so I did a fresh install into a new folder and (probably importantly) installed the missing nodes (via Manager) one at a time. Restart revealed some more missing nodes; added those... required two rounds of this but with a bit of patience (damn site quicker than a manual install, that's for sure) it seems to work fine. very impressed with the new Video suite. Thanks, K

LW

2025-02-04 12:07:45 +0000 UTC

Now, I know what you will say: You dont have to use this flow. And you are right. I will move on.

Alexander Morland

2025-02-04 08:38:58 +0000 UTC

Do you not save meta data with your images? that is a significant size. Not being able to use any part without installing all dependencies for all workflows is also bad. ComfyUI lets you very conveniently switch between flows and even pass results from one flow to another. There is simply no need to put all stuff in one workflow.

Alexander Morland

2025-02-04 08:38:32 +0000 UTC

Time to read up then :) But just to clarify, having a lot of nodepacks doesnt really affect the performance of comfy ui except the start time of course. But after than that, each node is only loaded when used actively.

Jay Bee

2025-02-04 04:14:05 +0000 UTC

rip, why would it install a workflow json in system32? Pretty sure you just clicked ok when it asked you where to save it and didn't choose a more suitable folder. System32 is one of the worst places you can save your own stuff that you download from the internet. It has the most critical system files in it and you may break stuff unintentionally. Just save it in My Documents or Downloads, etc.

Jay Bee

2025-02-04 04:12:41 +0000 UTC

Aye, runpod is the most used one, it's very cheap to rent a 4090 for the training task, or go overkill and rent some beast with 80 Gb VRAM for fun, for $1 an hour.. Though now replicate.com and fal.ai have started offeringi Flux LoRA training where you don't need to install anything or even touch a terminal, you just upload a zip file with your photos and wait..

Jay Bee

2025-02-04 04:10:57 +0000 UTC

In the HUNYUAN Text To Video Option A section, I receive the following package. Although clip-vit-large-patch14 is installed correctly, so is llava-llama-3-8b-text-encoder-tokenizer. DownloadAndLoadHyVideoTextEncoder Trying to set a tensor of shape torch.Size([128256, 4096]) in "weight" (which has shape torch.Size([128320, 4096])), this looks incorrect.

Vitaliy Lazorishinets

2025-02-04 03:54:05 +0000 UTC

U da man!

Steve I

2025-02-04 02:54:17 +0000 UTC

File "/workspace/ComfyUI/execution.py", line 174, in _map_node_over_list process_inputs(input_dict, i) File "/workspace/ComfyUI/execution.py", line 163, in process_inputs results.append(getattr(obj, func)(**inputs)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/workspace/ComfyUI/nodes.py", line 893, in load_unet model = comfy.sd.load_diffusion_model(unet_path, model_options=model_options) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/workspace/ComfyUI/comfy/sd.py", line 882, in load_diffusion_model sd = comfy.utils.load_torch_file(unet_path) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/workspace/ComfyUI/comfy/utils.py", line 36, in load_torch_file sd = safetensors.torch.load_file(ckpt, device=device.type) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/workspace/ComfyUI/venv/lib/python3.11/site-packages/safetensors/torch.py", line 313, in load_file with safe_open(filename, framework="pt", device=device) as f: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ safetensors_rust.SafetensorError: Error while deserializing header: MetadataIncompleteBuffer 2025-02-04T02:39:21.735286 - Prompt executed in 9.32 seconds ``` ## Attached Workflow Please make sure that workflow does not contain any sensitive information such as API keys or passwords. ``` Workflow too large. Please manually upload the workflow from local file system. ``` ## Additional Context (Please add any additional context or steps to reproduce the error here) " I am always getting errors with this setup. At first it was pip modules then this, whatever I try to do it gives errors. I am using podman setup with a5000

Kevin A

2025-02-04 02:45:26 +0000 UTC

fresh install getting conflict errors with nodes - anyone else have that issue?

Hustle

2025-02-04 01:28:57 +0000 UTC

this helped thank you

kristopher ulley

2025-02-04 00:59:23 +0000 UTC

same it need to uise a fresh workflow file

kristopher ulley

2025-02-03 23:47:19 +0000 UTC

i totally forgot about the last step. thanks bro

Dark Dude Maurycy

2025-02-03 23:26:27 +0000 UTC

nvm I reloaded the workflow and it worked fine!

Addel Hamoudhy

2025-02-03 22:27:40 +0000 UTC

Just getting this error in Comfy: Missing Node Types When loading the graph, the following node types were not found workflowFlorence workflowFlux Controlnet workflowNodes 3 workflowXLabs Sampler workflowAdetailer workflowoutpaintflor workflowfaceswap2 workflowfaceswap3 workflowREACTORFACESWAP workflowpullflo workflowpulidtxt workflowpluidlux workflowfillparam workflowPULIDREDUX workflowREDUXOTHERPARAM workflowshaker workflowLiveparam workflowLIVEPORTRAITIMGPARAM workflowLIVEPORTRAITVID2VIDPARAM workflowLTXPARAMTEXTOVIDGGUF workflowLTXPARAMTXTFP workflowLTXIMAGETOV workflowhuynyav2vparm

Addel Hamoudhy

2025-02-03 22:24:30 +0000 UTC

Got the following errors from Python scripts files not being on path. Help will be greatly appreciated. ## ComfyUI-Manager: installing dependencies. (GitPython) WARNING: The script pygmentize.exe is installed in 'E:\00_Aitrepreneur\ComfyUI_windows_portable\python_embeded\Scripts' which is not on PATH. Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. WARNING: The script markdown-it.exe is installed in 'E:\00_Aitrepreneur\ComfyUI_windows_portable\python_embeded\Scripts' which is not on PATH. Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. WARNING: The script typer.exe is installed in 'E:\00_Aitrepreneur\ComfyUI_windows_portable\python_embeded\Scripts' which is not on PATH. Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. ## ComfyUI-Manager: installing dependencies done. ComfyUI startup time: 2025-02-03 01:59:14.057 Platform: Windows Python version: 3.12.8 (tags/v3.12.8:2dc476b, Dec 3 2024, 19:30:04) [MSC v.1942 64 bit (AMD64)] Python executable: E:\00_Aitrepreneur\ComfyUI_windows_portable\python_embeded\python.exe ComfyUI Path: E:\00_Aitrepreneur\ComfyUI_windows_portable\ComfyUI ComfyUI Base Folder Path: E:\00_Aitrepreneur\ComfyUI_windows_portable\ComfyUI User directory: E:\00_Aitrepreneur\ComfyUI_windows_portable\ComfyUI\user ComfyUI-Manager config path: E:\00_Aitrepreneur\ComfyUI_windows_portable\ComfyUI\user\default\ComfyUI-Manager\config.ini ** Log path: E:\00_Aitrepreneur\ComfyUI_windows_portable\ComfyUI\user\comfyui.log WARNING: The script f2py.exe is installed in 'E:\00_Aitrepreneur\ComfyUI_windows_portable\python_embeded\Scripts' which is not on PATH. Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. Prestartup times for custom nodes: 8.7 seconds: E:\00_Aitrepreneur\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-Manager Checkpoint files will always be loaded safely. Total VRAM 24576 MB, total RAM 65367 MB pytorch version: 2.6.0+cu126 Set vram state to: NORMAL_VRAM Device: cuda:0 NVIDIA GeForce RTX 3090 : cudaMallocAsync Using pytorch attention ComfyUI version: 0.3.13 [Prompt Server] web root: E:\00_Aitrepreneur\ComfyUI_windows_portable\ComfyUI\web Traceback (most recent call last): File "E:\00_Aitrepreneur\ComfyUI_windows_portable\ComfyUI\nodes.py", line 2110, in load_custom_node module_spec.loader.exec_module(module) File "", line 999, in exec_module File "", line 488, in _call_with_frames_removed File "E:\00_Aitrepreneur\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-AdvancedLivePortrait\init.py", line 1, in from .nodes import NODE_CLASS_MAPPINGS, NODE_DISPLAY_NAME_MAPPINGS File "E:\00_Aitrepreneur\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-AdvancedLivePortrait\nodes.py", line 11, in import dill ModuleNotFoundError: No module named 'dill'

Verratanectu

2025-02-03 15:46:44 +0000 UTC

For anyone having trouble. Please. try this: 1. Open the workflow and then Update comfy ui. close everything and restart 2. Now Update missing custom nodes. close everything and restart. 3. NOW open the workflow from the file again, like dont just let it load up from memory. open it up separate. idk why but it worked after i did that.

Yukon Cornelius

2025-02-03 15:44:04 +0000 UTC

I want to try the live portrait feature of adjusting the face. but I don't want this monster of thousands of nodes that requires installing 50 new nodepacks. This idea of one all in one workflow is just a bad idea imho. I have tried and failed to delete all the other groups to install just the live param one, but then it cant figure out what that sentral workflowLiveParam node is..

Alexander Morland

2025-02-03 15:43:41 +0000 UTC

Look in your System32 folder. That's where it installed for me.

Grey Walker

2025-02-03 14:39:38 +0000 UTC

tryd to post picture of workflow loding errors , asked how to fix it

stig Boy

2025-02-03 10:52:56 +0000 UTC

same here...

tekkaman000

2025-02-03 10:15:09 +0000 UTC

I might be stupid, but I cannot find the workflow

Jan Vidar Jacobsen

2025-02-03 09:22:27 +0000 UTC

Installed all the nodes, fixed the errors for pulid but now i get this and i have no idea what to do TypeError: Cannot read properties of undefined (reading 'inputs') when i try to generate something

Fantasy art AI

2025-02-03 08:08:21 +0000 UTC

@AI Enthusiast I used Runpod. It was too slow on my 4070 Ti.

Mathilde Leroux

2025-02-03 07:00:06 +0000 UTC

Check SECourses on youtube. He uploaded a detailed guide for Flux Lora training.

Mathilde Leroux

2025-02-03 06:58:10 +0000 UTC

how did you train the sdxl one? kohya ss has flux training but on a 4070 ti super 16gb vram its either really slow or i have to train at low res. im sure theres some paid flux training websites that make it easy by just throwing images at it as well

AI Enthusiast

2025-02-03 02:59:29 +0000 UTC

i am getting this error: DownloadAndLoadHyVideoTextEncoder Failed to import transformers.models.timm_wrapper.configuration_timm_wrapper because of the following error

ty110072

2025-02-03 02:02:32 +0000 UTC

Hey, I was wondering, is there a guide to train flux loras? I did the SDXL but I couldn't use them with the flux model and comfy ui. I was really hoping. Thanks for all your content man! Hope you're feeling better.

Swink

2025-02-03 01:20:50 +0000 UTC

No Insightface or wrong python version thus no avaiable Insightface version?

Pawel Horna

2025-02-03 00:23:19 +0000 UTC

just get comfy desktop. auto updates and prioritized support. also comes with the manager. making the portable version obsolete unless you actually want to put comfy on a usb drive to make it portable. desktop: https://www.comfy.org/download

AI Enthusiast

2025-02-03 00:03:35 +0000 UTC

Nice to have you back ! I have a problem with v3, I can't install the missing PuLID nodes... I keep getting Import Failed :(

Stéphane Lavoisard

2025-02-02 22:36:50 +0000 UTC

Could you do a local rag with deepseek and qdrant and streamlit ?

olivier andrade

2025-02-02 19:59:59 +0000 UTC

Finally…🫣

Dante Bastianelli

2025-02-02 19:58:57 +0000 UTC

ULTIMATE ALL-IN-ONE FLUX WORKFLOW V3!

Comments

I keep getting memory allocation error everytime I run it once. First time its okay but after the first I keep getting errors and it doesn't give me the continuity

Hey I'd like to know if there is an FAQ to using this, I am trying to run it but it just says no prompt etc. Where do we start begin etc?

dm me screenshots of the whole parameters before generation

I am getting the error: Prompt outputs failed validation BasicGuider: - Required input is missing: model. This is in the FP8 REDUX + PULID section. All the models are in the drop downs so not sure what's happening here.

this means your prompt is too long AND that you don't have enough vram to do the operation, download a smaller model

maybe because you haven't activated the whole workflow and are using the preview area only?

The outpainting workkflow is creating a new image under the orinial one but it does not generate the extension of the original image, why do you think it could be that? Thanks

3 weeks later, no update, no help, no response, unsubscription, bye

Thank you for this great workflow! I am currently trying to swap faces, but the results look more like a merge, than a swap. Are there any parameters I can tweak?

Is there any way I can recover from "Failed to download model-00002-of-00004.safetensors." without starting over? This is like the fourth time now... :(

the installation literally take 232gb oof

im missing the "workflowpluidlux" (yes seems to be spelled 'plu' in your workflow) and workflowpulidtxt nodes and 'find missing nodes' doesnt pull them up and also searching for their names in custom nodes manager doesnt work. Where can I find these nodes? Its part of the pulid fp8 workflow

Sorry man, I stopped your cute installer after it downloaded 132GB of data and still hasn't finished. Just to generate some images using a local model there are lots of other 1 click installers which download less than 30GB and work fully fine with controlnet and face swap etc. Good luck.

I'm thinking a fresh install is needed as potentially updating comfyui has caused this. I'll report back

The same

the same

Hi. Getting the same errors, so I'm doubling on the question on what we need to do to get this to work!

I was using the outdated V2 Ultimate Flux model. After I deleted everything and reinstalled ComfyUI using the V3-ULTIMATE_FLUX-COMFYUI-MANAGER_AUTO_INSTALL-UPDATED.bat file, I got things to work after following Aitrepreneur's guide.

any solution?

send me a dm and some screens

Some help please. I tried the outpainting for the first time. Nothing happens. I expanded the image as you did in the video. But after doing that and going up to the outpaint section. Putting a prompt, clicking queue. Nothing happens.

Do I have to reinstall after that?

This helped me a lot, Portable Python environmental path was going to my appdata, to avoid this do this: Go to -> "start" and type "Manage App Execution Aliases". Go to it and turn off "Python"

watch the troubleshooting video if this is your first time: https://www.patreon.com/posts/exclusive-video-116007628

hi friend, in live portrait v3, in result, in output video i get a vidéo without sound, and also it is accelerated video, how to fix this please?

There is a ComfyUI problem with the UltimateSDUpscale node crippling your v3 workflow. (In just the one portion anyway.) I have been scouring posts in other places for a fix. Is it possible you've encountered the problem? Or maybe you replace it with another upscaler that works?

Turns out its because my GPU wasn't fast enough. when I run the comfyui in CPU only mode it will load but of course VERY slow

By "restore" do you mean have the workflow recreate the image?

You may have checked this already, but.... check that the seed update is not on fixed. Use Increment or Random, otherwise if the seed has just been used and no other changes, the system just ignores the Queue instruction. No error message it just does nothing! ComfyUI devs should change that.

Is it possible to restore an old image in this workflow?

Can the main Comfyui folder be moved or will this break dpendencies?

I had the same issue. Go into the Node Manager, look for ComfyWorkflows and install it: https://github.com/thecooltechguy/ComfyUI-ComfyWorkflows

Did you manage to figure this out? I'm also missing all workflow nodes.

I will just say that everything actually works, I installed it according to the manual instructions. Yes, you need at least minimal knowledge of where to look for which models, what interacts with what, how to configure it. But it all loads quickly. Thank you for this workflow.

I created a portrait of a model I really am happy with. I would like to put this same model into different poses. I used the openpose section and got a skeleton but how do I get my model to be used instead of it generating a completely new image?

Another example: * UnetLoaderGGUF 1795: - Value not in list: unet_name: 'ltx-video-2b-v0.9-Q8_0.gguf' not in ['flux1-dev-Q8_0.gguf']

Here is an example of my last one: Failed to validate prompt for output 1935: * UnetLoaderGGUF 1967: - Value not in list: unet_name: 'fast-hunyuan-video-t2v-720p-Q8_0.gguf' not in ['flux1-dev-Q8_0.gguf']

Does anyone have a prompt they can share to get the lifelike photorealistic looking people? Everything I type in using the flux schnell model comes out as an illustration.

Altrepreneur how do i fix? missing node types in the latest comfy. i tried adding them but yeah

Thank you for this. This is amazing. :)

I have no "workflows" nodes they are in red. nothing works... :((

Hey friends, am i blind or how do i use checkpoints with anything? like for example GGUF image generation.

Do you happen to have any experience with running a "serverless" Runpod instance? It seems like it could be great since you only get billed for GPU usage, but I'm struggling to figure it out.

How do i increase the length or time of the ltx image to video scene?

Hi, can you provide a list of the recommended LLM models so l can check against what has been installed? Having errors such as Prompt outputs failed validation VAELoader: - Value not in list: vae_name: 'ae.safetensors' not in ['taesd', 'taesdxl', 'taesd3', 'taef1'] Thanks

I'm trying to use the image fp8 image to video, but it doesn't generate an output. What do I need to to? * CheckpointLoaderSimple 1778: - Value not in list: ckpt_name: 'ltx-video-2b-v0.9-fp8_e4m3fn.safetensors' not in [] Output will be ignored

Enjoy ;)

The current reactor repo (uncensored one) is here: https://codeberg.org/Gourieff/comfyui-reactor-node It will install automatically with the patreon installer

https://github.com/Gourieff/comfyui-reactor-node This repository has been disabled. i download it from here https://github.com/GraftingRayman/Comfyui-reactor-node

Fixed it by completely re-downloading Kijai/llava-llama-3-8b-text-encoder-tokenizer

this worked for me.

Now, I know what you will say: You dont have to use this flow. And you are right. I will move on.

Time to read up then :) But just to clarify, having a lot of nodepacks doesnt really affect the performance of comfy ui except the start time of course. But after than that, each node is only loaded when used actively.

U da man!

fresh install getting conflict errors with nodes - anyone else have that issue?

this helped thank you

same it need to uise a fresh workflow file

i totally forgot about the last step. thanks bro

nvm I reloaded the workflow and it worked fine!

Look in your System32 folder. That's where it installed for me.

tryd to post picture of workflow loding errors , asked how to fix it

same here...

I might be stupid, but I cannot find the workflow

Installed all the nodes, fixed the errors for pulid but now i get this and i have no idea what to do TypeError: Cannot read properties of undefined (reading 'inputs') when i try to generate something

@AI Enthusiast I used Runpod. It was too slow on my 4070 Ti.

Check SECourses on youtube. He uploaded a detailed guide for Flux Lora training.

how did you train the sdxl one? kohya ss has flux training but on a 4070 ti super 16gb vram its either really slow or i have to train at low res. im sure theres some paid flux training websites that make it easy by just throwing images at it as well

i am getting this error: DownloadAndLoadHyVideoTextEncoder Failed to import transformers.models.timm_wrapper.configuration_timm_wrapper because of the following error

Hey, I was wondering, is there a guide to train flux loras? I did the SDXL but I couldn't use them with the flux model and comfy ui. I was really hoping. Thanks for all your content man! Hope you're feeling better.

No Insightface or wrong python version thus no avaiable Insightface version?

just get comfy desktop. auto updates and prioritized support. also comes with the manager. making the portable version obsolete unless you actually want to put comfy on a usb drive to make it portable. desktop: https://www.comfy.org/download

Nice to have you back ! I have a problem with v3, I can't install the missing PuLID nodes... I keep getting Import Failed :(

Could you do a local rag with deepseek and qdrant and streamlit ?

Finally…🫣

Related Creators