FLEXI Phoenix + Baby Keychain EARLY ACCESS
Added 2024-10-03 21:45:54 +0000 UTCHey everyone!
The phoenix is finally here and I'm SO EXCITED about it! I've been wanting to do this model for soooooo long, so I was so stoked when y'all agreed with me and voted on it this past month! Same body and assembly style as the raven, plus of course a little baby to go with it!
Keychain and non-keychain version of baby included, and Bambu multicolor 3MF file included.
Filament is Ziro matte red/yellow/purple
Print recs:
2-3 walls
5-15% infill
No supports
Print 1 connector for head, wings pop into the shoulders and
2 wing pieces snap together.
Add brim if needed
Refer to the Flexi + Deluxe + Original seller tier download link: https://www.patreon.com/posts/flexi-model-site-103246452?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link
I hope y'all like them as much as I do!
Thanks so much for all your support!
Kek
Comments
Sorry wing was too loose. I just printed a pink flamingo from another designer. The design is so awful that i trashed it. I think your design would work wnderful for a flamingo if it was voted for
Urban Froot
2024-10-19 13:10:27 +0000 UTCToo loose
Urban Froot
2024-10-19 12:40:25 +0000 UTCThank you so much for the kind words!! I'm glad you like them <3 What issues are you having with the win ball socket?
Kirsten McKenzie
2024-10-19 06:12:14 +0000 UTCThe raven/phoenix is one of your best works but the ball joint on wing is a slight issue. If only it could work like leg joints...it would be something to look for future work...i will try to scale wing up...all i can say is wow im.very impressed
Urban Froot
2024-10-18 22:22:09 +0000 UTCI always think of a joke when having phoeniks or raven in my hands. Why do birds always stand, even when they’re resting? Because they don’t have knees! NOT ALL OF THEM! :D
Tonia Kowalczyk
2024-10-14 21:27:27 +0000 UTCYay! Glad to hear!
Kirsten McKenzie
2024-10-08 02:39:37 +0000 UTCThat did work better.
Pcgstuff
2024-10-08 01:37:19 +0000 UTCYou can try scaling the wings up about 1% or so and see if that helps! :)
Kirsten McKenzie
2024-10-07 19:03:04 +0000 UTCThanks I will try that
Pcgstuff
2024-10-07 19:02:30 +0000 UTCYou can try scaling the wings up about 1% or so! :)
Kirsten McKenzie
2024-10-07 19:01:15 +0000 UTCThank you for the quick fix. It is a tight fit but it works. I had problems with my wing ball joints being too loose also.
Pcgstuff
2024-10-07 15:23:13 +0000 UTCHey there! Mine weren't lose, but ball joints do tend to fluctuate a lot depending on settings and filament. They're actually the exact same joints as the raven :)
Kirsten McKenzie
2024-10-07 05:52:49 +0000 UTCHi, the ball of the wing to the body is really loose. Ive tried a couple different filaments. Was yours loose? I tried coating the ball in superglue and it seems to work a little better. The Raven works great. I’ve going to print one as large as I can on my Neptune 4 Max. Should be almost life size.
Patrick W
2024-10-07 00:15:14 +0000 UTCJust checked and updated/edited it! :)
Kirsten McKenzie
2024-10-06 22:23:43 +0000 UTCI had problems with keyring hole. It didn't go through. Is this just my experience?
Pcgstuff
2024-10-06 22:16:22 +0000 UTCYay!!
Kirsten McKenzie
2024-10-05 00:01:23 +0000 UTCI just printed the Raven I can’t wait for filament for this one!!
Jennifer Oden
2024-10-04 13:53:13 +0000 UTCAww thank you so much!! <3
Kirsten McKenzie
2024-10-04 01:04:58 +0000 UTCThank you!!
Kirsten McKenzie
2024-10-04 01:04:49 +0000 UTCYessss it's such a good one!
Kirsten McKenzie
2024-10-04 01:04:45 +0000 UTCThanks so much!!
Kirsten McKenzie
2024-10-04 01:04:37 +0000 UTCYayyy I'm so glad you like it!
Kirsten McKenzie
2024-10-04 01:04:34 +0000 UTCAbsolutely stunning! ugh, just love ya and your talent!
Melyssa Daulton
2024-10-03 23:33:24 +0000 UTCBeautiful
Andrew Sheffield
2024-10-03 22:55:37 +0000 UTCTrust me I am looking lol just ordered 30 rolls of filament yesterday plus a CMYK bundle
Ron Steltenpool
2024-10-03 22:27:00 +0000 UTCOh wow that color on them turned out amazing, now it’s time to make mini phenixes
Callys3DPrinting
2024-10-03 22:11:41 +0000 UTCOmg this is gorgeous!!!
Carol Tilbury
2024-10-03 22:11:31 +0000 UTCOOOOO I love this! I was about to put some fidgets on the printer but I think I'll print this instead!
Nadia Beckman
2024-10-03 22:00:39 +0000 UTCAwww bummer! Maybe you can find a similar one with a different brand!
Kirsten McKenzie
2024-10-03 21:48:42 +0000 UTCLove that filament to bad that I can't get it in Australia without paying a arm and a leg or sell a kidney for that matter lol
Ron Steltenpool
2024-10-03 21:48:18 +0000 UTC
